Reason 4 and Digital Performer 6 user report

Did a simple upgrade to SL last night on my MacBook. No erase & install just ran the permissions repair and drive repair before the install. Repaired permissions after, too.
Reason 4 works fine, MOTU Performer 6 works fine. When I launched Performer it sent me to the Pace Interlok site for an update to that, but no problem. Also it rechecked all my AU plugins on first run.
I was playing music an hour after starting the upgrade. Good deal.

I assume this access is open to everyone when I connecto any wireless network
No necessarily, it depends whether you just changed your home folders and nothing else.
But just your home folders present a problems as they should have extended attributes which are now removed. More on that later.
Using one chmod to a directory affects all equally, though the files may have individually different permissions.
I don't know how extensively you have altered the modes permissions, but from what you have shown in your first post your Home folders are incorrect.
For your home folder, which is the default location when you start Terminal, and I dont think you have strayed from there, all the listings, except Parallels are folders, prefaced with the letter d. for folder.
On my machine, for example, the pattern for the home folders all show
drwx------@ 5 xxxxxx staff 170 25 Jun 06:07 Desktop
normally that would be chmod 700 Desktop which will get you
drwx------
but note the @ which shows an extended attribute or ACL in Leopard.
to write the ACL shown as @
You will need to read
man chmod about ACL MANIPULATION OPTIONS
Personally, I think that playing around with chmod without a backup was not a good idea, and I wonder if your ambition has exceeded your knowledge. Sorry if that sounds tough, but a possible Archive and Install may be your safest path I think because what you have messed with was no small oops with a simple fix.
You could just change those home folders to chmod 700 and see how it goes without the attribute, or bite the bullet and do an Archive and Install.
I do not run parallels and so have no idea what is permissions should be.
That Time capsule is starting to look pretty good now
Message was edited by: roam2
Message was edited by: roam2

Similar Messages

Numa Organ and Digital Performer

I just got a Studiologic Numa Organ, and I am very pleased with it.
My Sequencer is Digital Performer 8,1 on Snow Leopard
My Audio to Midi Setup sees the Numa ONLY if I connect it directly through the USB port to The Mac
Audio to Midi Setup will also see my MOTU 128 Express interface also when connected through the USB port however I am unable to connect the Keyboard to the Interface as everything is grayout
If I connect the Numa directly to the USB interface it doesn't appear in Audio to Midi Setup and Digital Performer doesnt Remap the Instruments
The Numa is set as "Local on / MIDI on"
While rcording I can see the various notes in the DP track, nowever when I play back the Numa doesn't make any sounds
Any suggetions?
PS
The MOTU USSSB interface is upgraded to the lateset version

If you're using Apple Loops, they will conform to the project tempo/key.
If you have a vocal track you wish to autotune, use Logic's "Pitch Correction" tool. Make sure to place it in the first available insert in your channel strip.
Cheers.

Is OS X Lion compatible with Final Cut Pro 6.0.6 and Digital Performer 6.02

I'm currently running OS X 10.6.8 and my Final Cut Pro 6.0.6 and Digiital Performer 6.02 work fine.
I want to upgrade to OS X Lion to take advantage of iCloud but I do not want to have to upgrade the FCP or DP programs.
Are my current versions compatible with OS X Lion?
Thanks,
Brett

See my tip:
https://discussions.apple.com/docs/DOC-2465

Logic7.1 with Digital Performer

Anybody using both on the same computer. And is it problem free. That,s Logic7.2 and Digital Performer.

Are you asking about using both at the same time or just having both installed on the same machine?
If it is the former then there are some issues you will run into is if you open a VI on DP Logic will think it found a new midi port and tell you so. You will also have to create an aux track in DP to get the audio in and also use something like soundflower to route the audio.
The other drawback is Logic only uses one processor (or audio stream) when just being used as a live VI host.
Chris

Is there any way to transfer Digital Performer Projects to Logic Pro 9?

I just bought Logic Pro 9 today. I tried to run a sequence that was recorded in Garage Band and Digital Performer and it looks like the hard drive is too slow to play it all back, although it plays back fine in DP. I tried to save the DP file as an AAF file but some of the audio files were in the wrong place when I played the Logic version. I also have tried saving it as an OMF and Logic is still attempting to open it an hour later. Any ideas on how to get from one to the other without merging/consolidating the files because it appears that Logic is having difficulty playing back the tracks on my Mac Book Pro.
Waves Platinum v 7.0 (32 bit) plugs

http://prodesigntools.com/tag/ddl
Mylenium

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

Performance Issue Crystal Report and Oracle

Hello,
We have one procedure that takes 3 input parameters and returns Cursor from Procedure that is used to design the report. There is no caluculation involved here and cursor is opended dynamically. We are using Oracle Native connection.
When we click on preview button it takes lots of time ( >10 Mins) to show complete data. While we call the same procedure in application and generate HTML report using Cursor returned it is done in < 15 Seconds. Can some point me where to look into to improve the performance of Crystal Report.
DB: Oracle 10G
CR: Version XI

Hi Vadiraja
The performance of a report is related to:
External factors:
1. The amount of time the database server takes to process the SQL query.
( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
2. Network traffics.
3. Local computer processor speed.
( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
4. The number of record returned
( If a sql query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
Report design:
1. Where is the Record Selection evaluated.
Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
2. How many subreports the report contains and in section section they are located.
Minimise the number of subreports used, or avoid using subreports if possible because
subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100 records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest factor why a report takes a long time to preview.
3. How many records will be returned to the report.
Large number of records will slow down the preview of the reports.
Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
4. Do you use the special field "Page N of M", or "TotalPageCount"
When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page of the report before it displays the first page, therfore it will take more time to display the first page of the report.
If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested.
It won't format the whole report.
5. Link tables on indexed fields whenever possible.
6. Remove unused tables, unused formulas, unused running totals from the report.
7. Suppress unnecessary sections.
8. For summaries, use conditional formulas instead of running totals when possible.
9. Whenever possible, limit records through selection, not suppression.
10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports. SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
11. Using one command as the datasource can be faster if you returns only the desired data set.
It can be faster if the SQL query written only return the desired data.
12. Perform grouping on server
This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
Regards
Girish Bhosale

1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

Hi,
I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting âCSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23â.
Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
Other reports are working fine.
1. TACAS+ Accounting - not working
2. Logged in Users - not working
3. TACAS+ Administration - working
4. Passed Authentication - working
5. Failed Attempts - working
Any suggestions or any idea, please revert.
Regards
Vineet

Hi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet

Report to see user type and roles assigned to users in EP?

Hi,
a) Is there any reporting mechanism in EP? Any specific report which throws up user types and roles assigned to the users? There is an option of 'Export' in the user management role but unfortunately it does not give information on User Type.
b) If the group is assigned a role, How can we see ( in any report) the roles assigned to a group? In the 'export' option of the 'User Management' this information does not come.

By default Portal UME comes along with the installation of portal.
Sometimes we may integrate external users using LDAP. At that time users come from ABAP stack or some active directories. But you can also create users in the portal UME. The purpose of using LDAP is to maintain the users centrally rather than creating again in portal.
You can check them in user administration->identity management and search for the users.
THere you can see some users will be from UME and some from LDAP.
User Admin tool is nothing but User Administration only.
Raghu

Profit & Loss / Balance Sheet and Project performance Report

Hello,
I am in mining service industry and looking for two basic reports as under, can you please guide me through and provide transactions.
1)Profit & Loss/ Balance Sheet
2)Project Performance report
Your prompt response will be much more appreciated.
Thanks,
San

Hi,
use this as shown below
menu path-
Accounting ® Financial Accounting ® Special Purpose Ledger ® Tools ® Report Painter ® Report Writer ® Report Group ® Display
tcode- GR53, GR55
Enter report group SL01.
Choose Execute.
Enter report group SL01 again, and then choose .
Enter the following data: current year, period 01-12, company code,ledger and plan version
kind regards
Arman
SAP FICO

Digital Performer 4.61 and MacBook Pro

Digital Performer 4.61 will not open on my MacBook Pro with Digi002R interface.
It loads up to tripan.bundle; pauses, then crashes before opening.

And your question is?

How to create a program that accepts 5 digits from the user between 0 and 9

how to create a program that accepts 5 digits from the user between 0 and 9 then put them in ascending order using link-list method..

You can use a scanner to get user input from the command line.
import java.util.*;
public class Test {
    private List<Integer> list;
    private Scanner in;
    public static void main (String... args) {
        new Test ();
    public Test () {
        list = new LinkedList<Integer> ();
        in = new Scanner (System.in);
        for (int i = 0; i < 5; i ++) {
            System.out.format ("Please enter a number (%d more): ", (5 - i));
            list.add (in.nextInt ());
        Collections.sort(list, new Comparator<Integer> () {
            public int compare (Integer i1, Integer i2) {
                return i2 - i1;
        System.out.println (list);
}

Getting Reason Code, Condition Type, and Condition Value in one report

Hello there,
I have got a Question for you all BW Gurus. I need the answer for this as soon as possible. I will assign points to all helpful answers.
I am having a Sales cube, Delivery Cube, and a Conditions Cube which I built. Each cube is populated from different ODS. Means there are 3 ODS for 3 cubes. I am joining these 3 cubes under a Multiprovider.
My Question is:
We are using Reason Codes at Delivery level. We have identified an empty field in the delivery tables and populating this field with the reason codes. We have condition type and condition value only in the Condition cube. One of the reporting requirements is that we need to see Reason code, Condition Type, and Condition value in one report. I am planning to report on the Multiprovider. Since Reason code, Condition Type, and Condition value are not present in all the 3 cubes (means they are not common characteristics in the Multiprovider), I dont think I can get those values in one report if I report on the Multiprovider. Please correct me if I am wrong. If what I say is correct, please tell me how to solve my problem. Once again, helpful answers will be greatly appreciated and rewarded with points.
Thank you in advance.
Kind Regards,
Swathi

Hello Swathi,
Please do not post the same question on multiple forums.
Thanks,

G5, Digital Performer, and 5.1 Mixing

Hey All,
Is anybody running a setup using a G5, Digital Performer 4.6, and mixing in 5.1? I am trying to figure out what I need to accomplish this. I have the G5 and DP, but I do not have any of the 5.1 equipment that is needed. I should also mention that I use Final Cut Studio as well.
Any insight as to how or what I need would be helpful.
Thanks!

Forget about Digital Performer - How about anybody using a G5 and mixing in 5.1?

Step to schedule to run the report and send to the users in Unix (10g AS)

Hello;
I'm looking for the script or the guide to schedule generate monthly report and send to the users such as using batch or cron job. Please help.
Thanks in advance,
TD

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

Reason 4 and Digital Performer 6 user report

Similar Messages

Maybe you are looking for