Reason 425: Manually Disconnected by Administrator

I just recently started getting this error. I am using Windows 8 and just received an update so perhaps that prompted this new error.
Secure VPN Connection terminated by Peer.
Reason 425: Manually Disconnected by Administrator
Connection terminated on: date/time
Sometimes I will get this message while initially trying to connect. Other times I will connect, be in the middle of something, and then the error message pops up and disconnects me (not good).
Any help would be greatly appreciated.

Turnoff your Windows Firewall..

Similar Messages

Defining Check void reasons (for manual checks)

Hi
I am voiding manual checks in FCH9 and FCH8. The check void reasons appearing in drop down are not sufficient. Hence i need to define more check reversal reasons.
I went through SPRO node for bank transactions (in FI). But i am not getting it.
Please help me how to define check reversal reason. Please provide for SPRO path or TCode

If you do not find the required path in customisation, always Ctrl+F (Find) and type the search text.
Alternatively, searching the forum with "Void Cheques" would have given the answer.
Anyway, you may also reach FCHV by the following path:
IMG ==> Financial Accounting ==> Accounts Receivable and Payables ==> Business Transactions ==> Outgoing Payments ==> Automatic Outgoing Payments ==> Payment Media ==> Check Management ==> Define Void Reason Codes.
Please read F1 help on the configuration screen.

PleaHi, se help, ive just tried to sync my Iphone with my PC and it wouldnt allow me to for some reason. I disconnected and just tried to play some of my music from my Iphone and loads of my playlists have completely vanished, im gutted.

HI, PLEASE HELP I'VE JUST TRIED TO SYNC MY IPHONE WITH MY PC, IT WOULD'NT ALLOW ME, LATER WHEN I DISCONNECTED AND TRIED TO PLAY SOME MUSIC THROUGH MY PHONE ALMOST ALL MY MUSIC HAS GONE PLEASE HELP !!!!!!

1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.

How to tell client disconection reason when invoke disconnect() on the server side.

Is there any way to tell client the reason for disconect when I call disconect() on the server side. its some way like using error object as optional parameter to include reject reason when invode rejectConnection

Ignore the JSRs for now.
Follow the JavaEE tutorial.
http://docs.oracle.com/javaee/6/tutorial/doc/
The answers to many of your questions will be clear to you once you have completed the tutorial.
I also like the tutorials here (they are a little dated, but still mostly relevant as the core JEE6 specs that the tutorial relies on were released over 5 years ago and JEE7 is yet to be released).
https://schuchert.wikispaces.com/EJB+3+and+Java+Persistence+API
zonski has a spring+javafx focused tutorial if you would prefer to learn and use Spring than JEE (they are differing technologies which cover pretty much the same functional set):
http://www.zenjava.com/series/building-jee-applications-in-javafx-2-0/
JavaFX is a client side framework so there is not much you would do with it on the server side.
It seems like there is a ton of "JSR's" for different tasks, and I'm not sure exactly what I need, and all that, so I'm really confusedNobody needs all of JEE, just use the bits that you want that are a good fit for whatever project you are doing - don't try to use everything at once.
A lot of the stuff can be learnt and used in isolation.
Selected relevant topics, might be (in the order that I would consider them):
Persistence: http://docs.oracle.com/javaee/6/tutorial/doc/bnbpy.html
Java Servlet Technology: http://docs.oracle.com/javaee/6/tutorial/doc/bnafd.html
JAX-RS web services: http://docs.oracle.com/javaee/6/tutorial/doc/giepu.html
Contexts and Dependency Injection: http://docs.oracle.com/javaee/6/tutorial/doc/gjbnr.html
Enterprise Beans: http://docs.oracle.com/javaee/6/tutorial/doc/bnblr.html

[Solved] Constant Disconnects/Timeout with ASUS USB-N13

I don't have built in lan/wifi in my laptop because the chip was fried during a storm so i'm completely dependent on my ASUS USB-N13 wifi for internet.
From the time i was running the install (2 days ago) i've been unable to keep a consistent connection to the internet as it always gets disconnected. It doesn't show it getting disconnected, it just times out.
I've read about everything I could find and am still just absolutely stumped. I'm no linux guru but i've never had such a frustrating time with anything in linux. So much to my dismay i'm making a post about.
Archlinux has picked up the stick without problems from the get go so I haven't installed the driver because most of what i read says the default should be good enough.
It was timing out when retreiving packages for the install as well, but after about 20 minutes of failing to reach the mirrors it would kick back on and continue downloading. Same happens in the gnome now unless i manually disconnect and reconnect from the network, disable or enable the usb dongle, or unplug and plug in the usb dongle.
Im not sure what else to say other then i'm now using network manager in gnome to handle it now.
Heres what i get with dmesg
4622.374771] cfg80211: Calling CRDA to update world regulatory domain
[ 4623.596820] usb 4-1.1: new high-speed USB device number 5 using ehci-pci
[ 4623.683404] rtl8192cu: Chip version 0x11
[ 4623.769690] rtl8192cu: MAC address: 74:d0:2b:8f:6a:74
[ 4623.769711] rtl8192cu: Board Type 0
[ 4623.769934] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 4623.770029] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[ 4623.770362] ieee80211 phy2: Selected rate control algorithm 'rtl_rc'
[ 4623.771188] rtlwifi: wireless switch is on
[ 4623.820441] systemd-udevd[6288]: renamed network interface wlan0 to wlp0s29u1u1
[ 4623.825232] rtl8192cu: MAC auto ON okay!
[ 4623.858017] rtl8192cu: Tx queue select: 0x05
[ 4624.227583] IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u1: link is not ready
[ 4625.826240] wlp0s29u1u1: authenticate with 20:10:7a:8c:e3:34
[ 4625.850127] wlp0s29u1u1: send auth to 20:10:7a:8c:e3:34 (try 1/3)
[ 4625.853879] wlp0s29u1u1: authenticated
[ 4625.855664] wlp0s29u1u1: associate with 20:10:7a:8c:e3:34 (try 1/3)
[ 4625.868031] wlp0s29u1u1: RX AssocResp from 20:10:7a:8c:e3:34 (capab=0x411 status=0 aid=2)
[ 4625.868087] wlp0s29u1u1: associated
[ 4625.868152] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u1: link becomes ready
[ 4936.940624] wlp0s29u1u1: deauthenticating from 20:10:7a:8c:e3:34 by local choice (reason=3)
[ 4936.953306] cfg80211: Calling CRDA to update world regulatory domain
[ 4937.788464] wlp0s29u1u1: authenticate with 20:10:7a:8c:e3:34
[ 4937.801000] wlp0s29u1u1: send auth to 20:10:7a:8c:e3:34 (try 1/3)
[ 4937.803124] wlp0s29u1u1: authenticated
[ 4937.804863] wlp0s29u1u1: associate with 20:10:7a:8c:e3:34 (try 1/3)
[ 4937.820448] wlp0s29u1u1: RX AssocResp from 20:10:7a:8c:e3:34 (capab=0x411 status=0 aid=2)
[ 4937.820484] wlp0s29u1u1: associated
[ 5962.631205] wlp0s29u1u1: deauthenticating from 20:10:7a:8c:e3:34 by local choice (reason=3)
[ 5962.644496] cfg80211: Calling CRDA to update world regulatory domain
[ 5965.940643] rtl8192cu: MAC auto ON okay!
[ 5965.973945] rtl8192cu: Tx queue select: 0x05
[ 5966.456280] IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u1: link is not ready
[ 5968.045109] wlp0s29u1u1: authenticate with 20:10:7a:8c:e3:34
[ 5968.058141] wlp0s29u1u1: send auth to 20:10:7a:8c:e3:34 (try 1/3)
[ 5968.064250] wlp0s29u1u1: authenticated
[ 5968.064530] wlp0s29u1u1: associate with 20:10:7a:8c:e3:34 (try 1/3)
[ 5968.088273] wlp0s29u1u1: RX AssocResp from 20:10:7a:8c:e3:34 (capab=0x411 status=0 aid=2)
[ 5968.088326] wlp0s29u1u1: associated
[ 5968.088392] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u1: link becomes ready
[ 6404.332810] wlp0s29u1u1: deauthenticating from 20:10:7a:8c:e3:34 by local choice (reason=3)
[ 6404.345782] cfg80211: Calling CRDA to update world regulatory domain
[ 6404.520827] wlp0s29u1u1: authenticate with 20:10:7a:8c:e3:34
[ 6404.533133] wlp0s29u1u1: send auth to 20:10:7a:8c:e3:34 (try 1/3)
[ 6404.543171] wlp0s29u1u1: authenticated
[ 6404.543846] wlp0s29u1u1: associate with 20:10:7a:8c:e3:34 (try 1/3)
[ 6404.562076] wlp0s29u1u1: RX AssocResp from 20:10:7a:8c:e3:34 (capab=0x411 status=0 aid=2)
[ 6404.562104] wlp0s29u1u1: associated
IW Dev
Interface wlp0s29u1u1
ifindex 4
wdev 0x200000001
addr 74:d0:2b:8f:6a:74
type managed
channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
I'm not sure what else to share that is useful.
Any help/suggestions/anything for an idiot who is most likely missing something simple would be greatly appreciated.
Last edited by johnsmith (2013-08-28 03:40:04)

rufus wrote:Oh you didnt mention a few things never mind what it said sometimes a different driver does the trick beautifully.
keep experimenting and screwing around youll get it right its not that you did anything wrong, its just that you havnt done anything right....(?)anyway
thisll give you another bump and maybe one of these subgeniouses will help... Im a ethernet kinda guy but I know wifi is tricky
and finicky read the wiki https://wiki.archlinux.org/index.php/Wifi and be perseverant youll get it.....good luck!
Me too. Sadly I am just not confident enough to try and mess with soldered components or i'd try replacing it. I'm going to give it another read and try some things and hope someone can provide some additional expertise. Thanks again!

WRT54G V7 Frequent Disconnections

I've read alot about frequent disconnections using wireless routers but i've tried all sorts of different settings and find it disappointing that the wireless router (WRT54G V7) won't 'keep alive' the connection when it should.
I'm on a WinXP Pro SP2 workstation (AMD + Epox if it matters) on a built-in LAN adapter using Linksys WRT54G V7. Using my DSL directly, Windows automatically redials if I don't have a connection and will keep trying for as many times I have in configured.
When I started using Linksys Wireless router, Windows no longer prompts for login to the DSL (PPPoE) whenever I lose the connection. I don't know why. I Linksys configured to 'keep alive' for 30 secs and I've tried the following with no improvments to my situation:
- enabling/disabling the DHCP Server
- manually entering DNS 1, DNS 2
- MTU is auto
- Tried configuring both Mixed/G-only
- all other options are default to enable my laptop on wireless
Does anyone know what I can do to force Linksys to check if there is a live connection, and redial if there isn't? What's annoying is that I have to restart my workstation to get the connection back. I've tried manually disconnecting through the Linksys admin console but when IE starts returning the message 'page cannot be found' then everything is disconnected.
I've only had the router for less than a month (got it as a present for myself) and I got was disconnections. Again, if I plug the DSL directly, whenever I don't have a connection for some reason, it will automatically redial and I'm connected again. Linksys WRT54G V7 doesn't do that.
Help!

Hi...
Try reseting and reconfiguring the router. Also set it up as keep alive specify the redial period. Change the MTU setting of the router to manual and specify the value as 1300. Also the PPPoE connection on the computer should be disabled when router is dialing.

Ideapad K1 shuts off and does not come back on unless hard reset by battery disconnect

For some reason, once in a while, my Ideapad K1 will shut off and will require the battery be manually disconnected and reconnected to come back on again. The light will not show charging when plugged in as well when it shuts off.
I am on the lenovo latest factory update.
This is quite annoying as it is difficult to remove the rear panel and put it back on to disconnect the battery.
Is there any kind of fix/patch/update that resovles this issue?
Are there any work arounds that are less of a hassle?

Try to set it up as new device, this time without using the latest backup. If this does not work, contact Apple to get it checked.
Apple - Support - Service Answer Center

Disconnected Mailbox can't reconnect.

Hi,
I have Exchange Server 2010 SP3 and DAG is running on two servers. I have moved my administrator & Discovery Search Mailbox database from the default database to DAG database successfully. Now it's shows disconnected & I cant reconnect the mail box.
but I can log on to the users mail id & can send, receive mail without any error. what is the reason for showing disconnect & what should I do?
Md. Ramin Hossain

Hello Mohd,
You have move your admin mailbox to DAG, after movment the source mailbox shows in disconnect state. I think it that mailbox which is seen to you .
Check can you find the admin mailbox in DAG, I am sure it will be there. So yopu are not connecting to disconnect mailbox,but instead to mailbox in DAG.
Dont worry about that disconnect mailbox , it will out of system after 5 days(Default).
And one more question: What was status of mailbox movment, was it cimpleted or completed with warning ?
Thanks,
Hasin choudhary.

Bootcamp wifi disconnects periodically

Hi all
I've got a late 2013 MacbookPro Retina base model with graphics card. I am having trouble with WIFI on bootcamp with Windows 7 Enterprise. Periodically the wifi connection will drop out, and when I move from one phyical location to another, the computer does not recognize that the wifi network is no longer there and will stay connected to the previous wifi, ignoring a new, working wifi network.
To fix the connectivity problem, I manually disconnect and reconnect to the appropriate network.
Any idea how to make this work automatically?
Thanks,
awo

Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
If the issue persists, please help to collect following information for further research:
1) Enable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support

IPod no longer disconnects

My iPod used to automatically disconnect after it updated. I transfered a file from my MacBook, which I manually added to my iPod. The manual update to the iPod on the MacBook requires that I manually disconnect the iPod from the MacBook. Fine. On my main Mac, the iPod should sync when connected and disconnect when finished. When I synced the iPod with my main Mac, it no longer disconnects automatically. Any thoughts?

I found the answer.

Vista SP2 and Access connections requiring manual reconnect

Hi,
I'm experiencing a problem after the installation of Windows Vista SP2 on my Vista Business. After a reboot, I must always manually 1) disconnect the WLAN connection and then 2) reconnect to establish a working WLAN connection and to gain access to Internet. Before I disconnect, the WLAN connection is alive, but I cannot access any websites. Everything worked just fine before installation of SP2.
I'm running Access connections version 4.42 on Thinkpad R61. I've read that someone has had a similar problem with wired LAN and with newer version of Access connections: http://social.technet.microsoft.com/Forums/en/itprovistasp/thread/17ba267e-0bb1-4621-b81f-04afa0d806...
Does someone know how to solve this issue and make the connection to work without a manual disconnect -> reconnect step?
BR,
Miika

After some searching, I found a working solution:
http://www.darthcontinent.com/2009/05/no-internet-after-installing-vista.html
Everything works fine now.

Cisco ASA 5520 Site-to-site VPN TUNNELS disconnection problem

Hi,
i recently purchased a Cisco ASA 5520 and running firmware v. 8.4(2) and ASDM v. 6.4(5)106.
I have installed 50 Site-to-Site VPN tunnels, and they work fine.
but randomly the VPN Tunnels keep disconnecting and few seconds after it connects it self automaticly....
it happens when there is no TRAFIC on, i suspect.
in ASDM in Group Policies under DfltGrpPolicy (system default) i have "idle timeout" to "UNLMITED" but still they keep disconnecting and connecting again... i have also verified that all VPN TUNNELS are using this Group Policie. and all VPN tunnels have "Idle Timeout: 0"
this is very annoying as in my case i have customers having a RDP (remote dekstop client) open 24/7 and suddenly it gets disconnected due to no traffic ?
in ASDM under Monitoring -> VPN .. i can see all VPN tunnels recently disconnected in "Login Time Duration"... some 30minutes, 52minutes, 40minutes and some 12 minutes ago.. and so on... they dont DISCONNECT at SAME time.. all randomly..
i dont WANT the VPN TUNNELS to disconnect, i want them to RUN until we manually disconnect them.
Any idea?
Thanks,
Daniel

What is the lifetime value configured for in your crypto policies?
For example:
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400

Data Guard Failover after primary site network failure or disconnect.

Hello Experts:
I'll try to be clear and specific with my issue:
Environment:
Two nodes with NO shared storage (I don't have an Observer running).
Veritas Cluser Server (VCS) with Data Guar Agent. (I don't use the Broker. Data Guard agent "takes care" of the switchover and failover).
Two single instance databases, one per node. NO RAC.
What I'm being able to perform with no issues:
Manual switch(over) of the primary database by running VCS command "hagrp -switch oraDG_group -to standby_node"
Automatic fail(over) when primary node is rebooted with "reboot" or "init"
Automatic fail(over) when primary node is shut down with "shutdown".
What I'm NOT being able to perform:
If I manually unplug the network cables from the primary site (all the network, not only the link between primary and standby node so, it's like a server unplug from the energy source).
Same situation happens if I manually disconnect the server from the power.
This is the alert logs I have:
This is the portion of the alert log at Standby site when Real Time Replication is working fine:
Recovery of Online Redo Log: Thread 1 Group 4 Seq 7 Reading mem 0
Mem# 0: /u02/oracle/fast_recovery_area/standby_db/onlinelog/o1_mf_4_9c3tk3dy_.log
At this moment, node1 (Primary) is completely disconnected from the network. SEE at the end when the database (standby which should be converted to PRIMARY) is not getting all the archived logs from the Primary due to the abnormal disconnect from the network:
Identified End-Of-Redo (failover) for thread 1 sequence 7 at SCN 0xffff.ffffffff
Incomplete Recovery applied until change 15922544 time 12/23/2013 17:12:48
Media Recovery Complete (primary_db)
Terminal Recovery: successful completion
Forcing ARSCN to IRSCN for TR 0:15922544
Mon Dec 23 17:13:22 2013
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance primary_db - Archival ErrorAttempt to set limbo arscn 0:15922544 irscn 0:15922544
ORA-16014: log 4 sequence# 7 not archived, no available destinations
ORA-00312: online log 4 thread 1: '/u02/oracle/fast_recovery_area/standby_db/onlinelog/o1_mf_4_9c3tk3dy_.log'
Resetting standby activation ID 2071848820 (0x7b7de774)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH
Mon Dec 23 17:13:33 2013
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH
Terminal Recovery: applying standby redo logs.
Terminal Recovery: thread 1 seq# 7 redo required
Terminal Recovery:
Recovery of Online Redo Log: Thread 1 Group 4 Seq 7 Reading mem 0
Mem# 0: /u02/oracle/fast_recovery_area/standby_db/onlinelog/o1_mf_4_9c3tk3dy_.log
Identified End-Of-Redo (failover) for thread 1 sequence 7 at SCN 0xffff.ffffffff
Incomplete Recovery applied until change 15922544 time 12/23/2013 17:12:48
Media Recovery Complete (primary_db)
Terminal Recovery: successful completion
Forcing ARSCN to IRSCN for TR 0:15922544
Mon Dec 23 17:13:22 2013
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance primary_db - Archival ErrorAttempt to set limbo arscn 0:15922544 irscn 0:15922544
ORA-16014: log 4 sequence# 7 not archived, no available destinations
ORA-00312: online log 4 thread 1: '/u02/oracle/fast_recovery_area/standby_db/onlinelog/o1_mf_4_9c3tk3dy_.log'
Resetting standby activation ID 2071848820 (0x7b7de774)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH
Mon Dec 23 17:13:33 2013
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH
Attempt to do a Terminal Recovery (primary_db)
Media Recovery Start: Managed Standby Recovery (primary_db)
started logmerger process
Mon Dec 23 17:13:33 2013
Managed Standby Recovery not using Real Time Apply
Media Recovery failed with error 16157
Recovery Slave PR00 previously exited with exception 283
ORA-283 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH...
Mon Dec 23 17:13:34 2013
Shutting down instance (immediate)
Shutting down instance: further logons disabled
Stopping background process MMNL
Stopping background process MMON
License high water mark = 38
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ALTER DATABASE DISMOUNT
Shutting down archive processes
Archiving is disabled
Mon Dec 23 17:13:38 2013
Mon Dec 23 17:13:38 2013
Mon Dec 23 17:13:38 2013
ARCH shutting downARCH shutting down
ARCH shutting down
ARC0: Relinquishing active heartbeat ARCH role
ARC2: Archival stopped
ARC0: Archival stopped
ARC1: Archival stopped
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Mon Dec 23 17:13:40 2013
Stopping background process VKTM
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Mon Dec 23 17:13:43 2013
Instance shutdown complete
Mon Dec 23 17:13:44 2013
Adjusting the default value of parameter parallel_max_servers
from 1280 to 470 due to the value of parameter processes (500)
Starting ORACLE instance (normal)
************************ Large Pages Information *******************
Per process system memlock (soft) limit = 64 KB
Total Shared Global Region in Large Pages = 0 KB (0%)
Large Pages used by this instance: 0 (0 KB)
Large Pages unused system wide = 0 (0 KB)
Large Pages configured system wide = 0 (0 KB)
Large Page size = 2048 KB
RECOMMENDATION:
Total System Global Area size is 3762 MB. For optimal performance,
prior to the next instance restart:
1. Increase the number of unused large pages by
at least 1881 (page size 2048 KB, total size 3762 MB) system wide to
get 100% of the System Global Area allocated with large pages
2. Large pages are automatically locked into physical memory.
Increase the per process memlock (soft) limit to at least 3770 MB to lock
100% System Global Area's large pages into physical memory
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Initial number of CPU is 32
Number of processor cores in the system is 16
Number of processor sockets in the system is 2
CELL communication is configured to use 0 interface(s):
CELL IP affinity details:
    NUMA status: NUMA system w/ 2 process groups
    cellaffinity.ora status: cannot find affinity map at '/etc/oracle/cell/network-config/cellaffinity.ora' (see trace file for details)
CELL communication will use 1 IP group(s):
    Grp 0:
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =88
LICENSE_MAX_USERS = 0
SYS auditing is disabled
NUMA system with 2 nodes detected
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/product/11.2.0.4
System name:    Linux
Node name:      node2.localdomain
Release:        2.6.32-131.0.15.el6.x86_64
Version:        #1 SMP Tue May 10 15:42:40 EDT 2011
Machine:        x86_64
Using parameter settings in server-side spfile /u01/oracle/product/11.2.0.4/dbs/spfileprimary_db.ora
System parameters with non-default values:
processes                = 500
sga_target               = 3760M
control_files            = "/u02/oracle/orafiles/primary_db/control01.ctl"
control_files            = "/u01/oracle/fast_recovery_area/primary_db/control02.ctl"
db_file_name_convert     = "standby_db"
db_file_name_convert     = "primary_db"
log_file_name_convert    = "standby_db"
log_file_name_convert    = "primary_db"
control_file_record_keep_time= 40
db_block_size            = 8192
compatible               = "11.2.0.4.0"
log_archive_dest_1       = "location=/u02/oracle/archivelogs/primary_db"
log_archive_dest_2       = "SERVICE=primary_db ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=primary_db"
log_archive_dest_state_2 = "ENABLE"
log_archive_min_succeed_dest= 1
fal_server               = "primary_db"
log_archive_trace        = 0
log_archive_config       = "DG_CONFIG=(primary_db,standby_db)"
log_archive_format       = "%t_%s_%r.dbf"
log_archive_max_processes= 3
db_recovery_file_dest    = "/u02/oracle/fast_recovery_area"
db_recovery_file_dest_size= 30G
standby_file_management = "AUTO"
db_flashback_retention_target= 1440
undo_tablespace          = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain                = ""
dispatchers              = "(PROTOCOL=TCP) (SERVICE=primary_dbXDB)"
job_queue_processes      = 0
audit_file_dest          = "/u01/oracle/admin/primary_db/adump"
audit_trail              = "DB"
db_name                  = "primary_db"
db_unique_name           = "standby_db"
open_cursors             = 300
pga_aggregate_target     = 1250M
dg_broker_start          = FALSE
diagnostic_dest          = "/u01/oracle"
Mon Dec 23 17:13:45 2013
PMON started with pid=2, OS id=29108
Mon Dec 23 17:13:45 2013
PSP0 started with pid=3, OS id=29110
Mon Dec 23 17:13:46 2013
VKTM started with pid=4, OS id=29125 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Mon Dec 23 17:13:46 2013
GEN0 started with pid=5, OS id=29129
Mon Dec 23 17:13:46 2013
DIAG started with pid=6, OS id=29131
Mon Dec 23 17:13:46 2013
DBRM started with pid=7, OS id=29133
Mon Dec 23 17:13:46 2013
DIA0 started with pid=8, OS id=29135
Mon Dec 23 17:13:46 2013
MMAN started with pid=9, OS id=29137
Mon Dec 23 17:13:46 2013
DBW0 started with pid=10, OS id=29139
Mon Dec 23 17:13:46 2013
DBW1 started with pid=11, OS id=29141
Mon Dec 23 17:13:46 2013
DBW2 started with pid=12, OS id=29143
Mon Dec 23 17:13:46 2013
DBW3 started with pid=13, OS id=29145
Mon Dec 23 17:13:46 2013
LGWR started with pid=14, OS id=29147
Mon Dec 23 17:13:46 2013
CKPT started with pid=15, OS id=29149
Mon Dec 23 17:13:46 2013
SMON started with pid=16, OS id=29151
Mon Dec 23 17:13:46 2013
RECO started with pid=17, OS id=29153
Mon Dec 23 17:13:46 2013
MMON started with pid=18, OS id=29155
Mon Dec 23 17:13:46 2013
MMNL started with pid=19, OS id=29157
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/oracle
Mon Dec 23 17:13:46 2013
ALTER DATABASE   MOUNT
ARCH: STARTING ARCH PROCESSES
Mon Dec 23 17:13:50 2013
ARC0 started with pid=23, OS id=29210
ARC0: Archival started
ARCH: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Successful mount of redo thread 1, with mount id 2071851082
Mon Dec 23 17:13:51 2013
ARC1 started with pid=24, OS id=29212
Allocated 15937344 bytes in shared pool for flashback generation buffer
Mon Dec 23 17:13:51 2013
ARC2 started with pid=25, OS id=29214
Starting background process RVWR
ARC1: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Dec 23 17:13:51 2013
RVWR started with pid=26, OS id=29216
Physical Standby Database mounted.
Lost write protection disabled
Completed: ALTER DATABASE   MOUNT
Mon Dec 23 17:13:51 2013
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
         USING CURRENT LOGFILE DISCONNECT FROM SESSION
Attempt to start background Managed Standby Recovery process (primary_db)
Mon Dec 23 17:13:51 2013
MRP0 started with pid=27, OS id=29219
MRP0: Background Managed Standby Recovery process started (primary_db)
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC2: Becoming the heartbeat ARCH
ARC2: Becoming the active heartbeat ARCH
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance primary_db - Archival Error
ORA-16014: log 4 sequence# 7 not archived, no available destinations
ORA-00312: online log 4 thread 1: '/u02/oracle/fast_recovery_area/standby_db/onlinelog/o1_mf_4_9c3tk3dy_.log'
At this moment, I've lost service and I have to wait until the prmiary server goes up again to receive the missing log.
This is the rest of the log:
Fatal NI connect error 12543, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=primary_db)(CID=(PROGRAM=oracle)(HOST=node2.localdomain)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 23-DEC-2013 17:13:52
Tracing not turned on.
Tns error struct:
    ns main err code: 12543
TNS-12543: TNS:destination host unreachable
    ns secondary err code: 12560
    nt main err code: 513
TNS-00513: Destination host unreachable
    nt secondary err code: 113
    nt OS err code: 0
Fatal NI connect error 12543, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=primary_db)(CID=(PROGRAM=oracle)(HOST=node2.localdomain)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 23-DEC-2013 17:13:55
Tracing not turned on.
Tns error struct:
    ns main err code: 12543
TNS-12543: TNS:destination host unreachable
    ns secondary err code: 12560
    nt main err code: 513
TNS-00513: Destination host unreachable
    nt secondary err code: 113
    nt OS err code: 0
started logmerger process
Mon Dec 23 17:13:56 2013
Managed Standby Recovery starting Real Time Apply
MRP0: Background Media Recovery terminated with error 16157
Errors in file /u01/oracle/diag/rdbms/standby_db/primary_db/trace/primary_db_pr00_29230.trc:
ORA-16157: media recovery not allowed following successful FINISH recovery
Managed Standby Recovery not using Real Time Apply
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
         USING CURRENT LOGFILE DISCONNECT FROM SESSION
Recovery Slave PR00 previously exited with exception 16157
MRP0: Background Media Recovery process shutdown (primary_db)
Fatal NI connect error 12543, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=primary_db)(CID=(PROGRAM=oracle)(HOST=node2.localdomain)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 23-DEC-2013 17:13:58
Tracing not turned on.
Tns error struct:
    ns main err code: 12543
TNS-12543: TNS:destination host unreachable
    ns secondary err code: 12560
    nt main err code: 513
TNS-00513: Destination host unreachable
    nt secondary err code: 113
    nt OS err code: 0
Mon Dec 23 17:14:01 2013
Fatal NI connect error 12543, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=primary_db)(CID=(PROGRAM=oracle)(HOST=node2.localdomain)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production
Time: 23-DEC-2013 17:14:01
Tracing not turned on.
Tns error struct:
    ns main err code: 12543
TNS-12543: TNS:destination host unreachable
    ns secondary err code: 12560
    nt main err code: 513
TNS-00513: Destination host unreachable
    nt secondary err code: 113
    nt OS err code: 0
Error 12543 received logging on to the standby
FAL[client, ARC0]: Error 12543 connecting to primary_db for fetching gap sequence
Archiver process freed from errors. No longer stopped
Mon Dec 23 17:15:07 2013
Using STANDBY_ARCHIVE_DEST parameter default value as /u02/oracle/archivelogs/primary_db
Mon Dec 23 17:19:51 2013
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance primary_db - Archival Error
ORA-16014: log 4 sequence# 7 not archived, no available destinations
ORA-00312: online log 4 thread 1: '/u02/oracle/fast_recovery_area/standby_db/onlinelog/o1_mf_4_9c3tk3dy_.log'
Mon Dec 23 17:26:18 2013
RFS[1]: Assigned to RFS process 31456
RFS[1]: No connections allowed during/after terminal recovery.
Mon Dec 23 17:26:47 2013
flashback database to scn 15921680
ORA-16157 signalled during: flashback database to scn 15921680...
Mon Dec 23 17:27:05 2013
alter database recover managed standby database using current logfile disconnect
Attempt to start background Managed Standby Recovery process (primary_db)
Mon Dec 23 17:27:05 2013
MRP0 started with pid=28, OS id=31481
MRP0: Background Managed Standby Recovery process started (primary_db)
started logmerger process
Mon Dec 23 17:27:10 2013
Managed Standby Recovery starting Real Time Apply
MRP0: Background Media Recovery terminated with error 16157
Errors in file /u01/oracle/diag/rdbms/standby_db/primary_db/trace/primary_db_pr00_31486.trc:
ORA-16157: media recovery not allowed following successful FINISH recovery
Managed Standby Recovery not using Real Time Apply
Completed: alter database recover managed standby database using current logfile disconnect
Recovery Slave PR00 previously exited with exception 16157
MRP0: Background Media Recovery process shutdown (primary_db)
Mon Dec 23 17:27:18 2013
RFS[2]: Assigned to RFS process 31492
RFS[2]: No connections allowed during/after terminal recovery.
Mon Dec 23 17:28:18 2013
RFS[3]: Assigned to RFS process 31614
RFS[3]: No connections allowed during/after terminal recovery.
Do you have any advice?
Thanks!
Alex.

Hello;
What's not clear to me in your question at this point:
What I'm NOT being able to perform:
If I manually unplug the network cables from the primary site (all the network, not only the link between primary and standby node so, it's like a server unplug from the energy source).
Same situation happens if I manually disconnect the server from the power.
This is the alert logs I have:"
Are you trying a failover to the Standby?
Please advise.
Is it possible your "valid_for clause" is set incorrectly?
Would also review this:
ORA-16014 and ORA-00312 Messages in Alert.log of Physical Standby
Best Regards
mseberg

Ipod touch 2nd gen disconnects from itunes and turns off while syncing

My Ipod touch i try to connect to itunes and sync it with the itunes, but everytime there is a problem. The problem is that every time it gets like maybe 10 - 30 % done syncing the ipod cuts to a black screen and it is gone from itunes window. Also occasionally the usb device is unrecognized and wont turn on for a minute of holding both the power and home buttons.
I have tried these things
1) syncing from a different computer
2) uninstalling itunes and other components
3) Deleting the current firmware and downloading the one of itunes
4) Checked for updates
5) used a different usb port and ports on the back of the computer
6) Restart the services (Apple mobile device ect.)
7) Restarting computer
8) Erase all contents and settings from the ipod but that doesnt work because when it is done it gets stuck on the apple logo with the loading circle but never turns on.
I have no idea what is wrong with my ipod if you have any questions or help post them, and i should get back to you asap.

Try this before you go to Apple:
Specific error codes and resolutions:
Error 9: This error occurs when the device unexpectedly drops off of the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software http://support.apple.com/kb/TS3125
copied from http://support.apple.com/kb/TS1275

Cannot disconnect iPod - files being used by another application

This is the first time I've connected my new iPod to my brand new computer(Dell E510 loaded). I've been able to down load some albums, and it has been charging (via usb port on tower) for 8 hours. When I try to eject the iPod via itunes I get the error. " iPod can not be disconnected since some of its files are being used by another application. Try again later" I don't have any other applications running. Since this if the 1st time I'm using it, I'm hesitant to follow any of the R procedures. So I close iTunes and open it again. Sometimes it recognizes the iPod and doesn't other times. Thanks for any input

I don't have McAfee and this happens to me as well (every single time since I got the 5th Gen Ipod last month).
I have been clicking on the "safely remove hardware" icon in the toolbar, and manually disconnecting it that way. It seems to work alright.
The annoying thing is that this is only an issue with my 5th gen Ipod. My Ipod Mini has never had any trouble disconnecting the normal way.

Reason 425: Manually Disconnected by Administrator

Similar Messages

Maybe you are looking for