Reason 8.1 will not ReWire slave to Logic Pro X? Anyone else experiencing this?
Hi folks,
I'm running the latest version of Logic Pro X (10.1.1) and the latest version of Reason (8.1) on a brand-new Retina iMac running Yosemite (10.10.1).
Prior to this, I was running Reason 6.5.3 and I also have a copy of Ableton Live 9.1.7. (On the same brand-new iMac, to be clear.)
Here's the problem:
Old Reason (6.5.3) would enter ReWire Slave Mode with Logic Pro X with zero issue. Same goes for Live 9.1.7. But once I upgraded to Reason 8.1, it won't do it anymore. I'm doing the obvious things:
-I open Logic first, before Reason
-I've made sure that CoreAudio and ReWire are turned on in Logic's Audio Preferences pane (I've also tried toggling both on/off)
-I've made sure that both programs are running 64-bit (although I did try running Reason in 32 as an experiment)
-I've downloaded and reinstalled the latest version of ReWire (1.7, I believe -- might be remembering that version number incorrectly)
-I've tried all of this with and without my Reason Ignition Key in a USB slot
No matter what I try, though, Reason never slaves itself.
It WILL slave itself to Ableton Live, though. So, to be clear:
-Live will slave to Logic
-Reason will slave to Live
-Reason will NOT slave to Logic
Am I overlooking something really silly here? I'd love to find an answer to this question so I can get back to my usual workflow ASAP!
Thanks very much for your help. I really appreciate it.
Cheers,
Adam
Hey Adam,
I am also having rewire problems with Reason 8.1 into Logic 10.1.1 and as you experience it's not with Reason into Ableton or Ableton into Logic (although Ableton has crashed a few times this way). Everything worked fine for me up until I downloaded the latest Logic download last week.
Is your Reason loading up as normal in stand alone mode? For me, Rewire either works perfectly (10% of the time) or I get the error message 'Engine not responding. Please check your Rewire host'. I have tried reinstalling Logic and have checked lots of forums but cannot find any concrete answers.
It's kinda driving me crazy as I'm in the middle of a project so would like to get it sorted asap! Let me know if you find anything! M
Similar Messages
-
TS1424 I downloaded a song and it will not play in its entirety. Is anyone else having this problem?
I downloaded a song and it will not play in its entirety. Is anyone else having this problem? This has occurred on two or three songs I've downloaded lately.
Other people have been having similar problems with songs over a couple of weeks or so.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link. -
HT5262 my phone will not turn on or do anything has anyone else had this problem
I have an iphone 5 and it is barely a year old and it will not come on . it is charged and I have tried to hold the home and sleep button down like it has been suggested to me but it still does not turn on.
Please make a Genius Appointment and take it in for service.
-
My ADE will not work, says its an activation problem, Anyone else having this prob?
I have downloaded Adobe Digital Editions v2.0. I have my computer authorized. Whenever I try to download a book from the local library, it states "Error! Check Activation." I contacted customer support, they suggested that I remove the program and then reinstall, which I did....Same error. I also downloaded 4.0 and 3.0 and after migration, it says it has encountered a prob and must shut. I can not seem to find anything on the website relating to this issue.
Make that [email protected]
-
Illustrator CS6 not shutting down without force quitting. Anyone else encountering this?
Just recently, Illustrator CS6 will not completely shut down unless force quit is used. Sometimes it appears to be off but then computer will not shut down and message appears.
Anyone else encounter this issue? Any suggestions? Thanks!Nobody can tell you anything without proper system info or other technical details like what message you actually get, crash logs and so on.
Mylenium -
I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point... -
I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?
Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!
-
I upgraded my operating system to Snow Leopard 10.6.8 and now my Lexmark X4875 will not print wirelessly and neither Apple, Lexmark or Belkin can work out why. Has anyone else experienced this and knows what to do? Thanks
You launched iPhoto and from its Preferences you selected Connecting camera opens.....
-
Hi, I have just purchased a new Macbook Pro. Whenever I try and buy anything on the internet (via Safari) on any website it will not allow me to add products to checkout. Has anyone else experienced this problem or can suggest a fix? Many thanks!
On all shopping sites, or only some? What happens when you try?
-
For some reason, the battery in my iPad 2 , ioa 7.1.2m has stopped charging. Has anyone else experienced this problem? If so, how did you remedy it, please ?
Batteries do have a finite life span.
That said there have been some users reporting battery issues but but there's no way to know what or why or how it happens.
You can try a reset. Hold down the sleep and home keys for about 20 seconds. Let it reboot and see if that helps.
If you have spares, you can try to swap out your charger and cable, just to see if there's any difference with them changed.
Another thing you can try is a restore. That's basically where you back it up and then restore it from a backup. (something to do a bit more research into if you plan to do it).
if you don't want to do that then you can make an appointment at your local apple store and have them check it out. -
Since day light savings, events are not saving in my calendar. Has anyone else had this problem?, Since day light savings, events are not saving in my calendar. Has anyone else had this problem?
Greetings,
I have not heard of that issue although some people have reported events showing an hour earlier / later (though I haven't seen that personally).
Questions:
What version of the Mac OS are you running (Apple > About this Mac)?
Can you make an event and then it just disappears?
Are you using iCloud / MobileMe / Google / Yahoo / Some other server based calendar?
Try these in order:
Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
Go to Apple Menu > System Preferences > Date & Time and make sure the Date and Time are correct and that the correct Time Zone is selected.
If that doesn't resolve the issue:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps. -
the devices is not popping up in our itunes. is anyone else having this problem. can you help me if you have the same problem
Try rebooting the computer and restarting the device.
Try a different cable.
In rare cases fluff in the connector port can prevent proper contact with the connectors used to transfer data. An air duster or thin piece of card or plastic can be used to tease out debris if that is the problem.
tt2 -
i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
In the last 2-3 weeks, if I leave my iMac idle (Snow Leopard 10.6.8), it will log itself off.....anyone else experience this?
Do you have "Log out after nn minutes of inactivity enabled in System Preferences -> Security ?
-
I am having issues with my iphone 4 touch screen, I can't do anything with it. I even have a hard time sliding the bar accross to accept calls. Has anyone else experienced this? I only have the phone 2 months.
I've not experienced this. But I do appreciate your asking.
Did you want help with your technical issue? If so, why don't you ask. Also state what troubleshooting steps you've taken.
Maybe you are looking for
-
Delete a calendar without deleting past events? (iCal 5.0.3)
Hi, Is there a way I can delete one of my calendars on iCal without losing all the past events? Right now, if I just delte it I get a warning that all event in that sequence will be gone. Thank you
-
So every time I tap on my iTunes app bubble it'll open but then it'll shut off automatically. I don't know what to do. I shut off my phone and turned it back on two times and it's still messing up. Someone help please!!!
-
Sleep to freeze (with OS X on 2nd HDD)
After initial quality screening, I replaced useless ODD with Intel SSD(X25-M) and installed OS X on it. Everything is extremely fine except sleep function. Command sleep or close the display makes main display OFF and power LED ON but not blinking. A
-
MYSTERY: T410s runs without the battery or the plug
I have a video if anyone needs to see it about this Thinkpad 410s. I always pull the battery to replace a screen on a laptop. After replacing the screen I got ready to test it. I forgot to repace the battery and with the power adapter NOT connected i
-
Same URL when called from other page when called directly behaves different
Hi All, I am working on SRM 5.0 implementation , the open catalog interface applications are called from a link from the standard ITS (thses catalog applications are developed in BSP) and then submited back to the ITS application using a URL : va r