Reason Arp wont work in Rewire Mode

Hi All,
the title of this thread pretty much explains my issue. i rewire appropriately, get sound and everything, but when i use reasons arp with a reason instrument.. it doesnt work. to test, i just opened reason and used the arp just in reason and it worked fine, so i know i am using it the right way.. any help on this??
thanks everyone

Did you try changing uefi to legacy?

Similar Messages

  • X3500 wont work in Bridge mode with ASA 5505

    Hi Everyone, I am currently running Linksys X3500 v1.0.0 and plan to use ASA 5505 as a PPPoE client. While PPPoE connection is working fine when i configure the linksys for PPoE, but When I configure the ASA 5505 to act as PPPoE client I'm unable to get the Linksys get the Internet up and running. I have opened support ticket with Cisco and per them X3500 is unable to provide PPPoE details in bridge mode. Cisco Ticket # 62968611 (PPPoE connection not working) The error on Cisco console is - asa5505# PPPoE: send_padiSnd) Dest:ffff.ffff.ffff Src:c8b3.735d.4e13 Type:0x8863=PPPoE-Discovery PPPoE: Ver:1 Type:1 Code:09=PADI Sess:0 Len:12 PPPoE: Type:0101VCNAME-Service Name Len:0 PPPoE: Type:0103:HOSTUNIQ-Host Unique Tag Len:4 PPPoE: 00000002 PPPoE: padi timer expired Can Linksys help.. What's the issue. Regards, Sumit

    Hi! I'm not so familiar with the Cisco ASA 5505 device. If you set your X3500 to a Bridge Mode, it will not give any PPPoE mode details and vice versa. Which of the two devices would you like to connect to the ISP's connection, is it the X3500 or the ASA 5505?

  • K7N2 Wont work in user mode

    Hi, i just installed my K7Ns with an XP 2000+ and a Radeon 9500pro and 512mb(2 sticks, only reading as 128 each) of Infinion PC-2100 DDR. Now, when I set jumper 10 to user mode, my machine crashes, but when it is in Safe mode, my system runs fine. Does anybody know what is going on?

    well, i messed around with J10 and 11, and messed around with the FSB in the BIOS, and it finally came back to life.

  • Firefox Crashes and Hangs when opened and wont work in safe mode

    I use a mac OS X 10.6.7
    I have tried to follow your guides but I have been unable to stop firefox from crashing. I disabled all the apps via safe mode and the programme still crashes.
    I type in about:crashes but only had time to get the last crash details

    Thanks for the note about profile locations.
    I deleted mimeType.rdf in my existing profile, still have the same issue - can't view Tools -> Options for the Applications tab, or download a file. Same goes for a new profile - the same issues arise.
    Firefox never does crash, I can leave it in this hung state for hours (I left it in a 'not responding' state last night and it was still hung this morning).
    I was going to add a screen shot to this post but Firefox hung when I clicked on the 'Browse' button. Perhaps this is an issue when FF tries to interact with my directory structure? Does that get us any leads on what's wrong?
    FYI, I currently have my antivirus disabled & not running in the task bar just in case that was interfering somehow.

  • Upgraded to Belle from anna now wifi wont work on ...

    tried everything but due to some reason wifi wont work on my e7, it was working al well on symbian anna but after the upgrade to *belle* it says connected but gives no browsing  ,on the same wifi network my other android phone works well
    is there a fix for this ??
    nokia can be suchha torture with their upgrades.phew.
    things i tried
    manually enetered and saved access point of wifi network.

    Hi miller5280
    Can you please explain the steps you took to "activate" your phone again?
    I am having this problem:
    1) after upgrade to the new software, phone was stuck in recovery mode (usb-itunes picture). Not jailbroken either.
    2) have done the "reset" i.e. off button & home button together
    2) I reinstalled itunes many times
    3) switch usb port many times
    4) de-auth / re-auth many times as well as purchased / download free apps (however, unable to sync due to itunes not recognizing the phone)
    5) BUT it still won't restore (error codes such as 13, 14 0r 1604)
    Can you or any here help me?? Can't use the phone at all. Very frustrating.....
    Tks

  • Using Reason in ReWire Mode

    Hi guys,
    I'm having trouble getting Reason to work in ReWire.
    I've checked a tutorial on YouTube and followed it to the letter but there is one part which doesn't seem to be working for me.
    Namely, when creating an External MIDI track the video shows Reason listed in the browser window for Logic under "Library", which is then chosen, along with the relevant Reason Instrument for the External MIDI channel.
    My browser doesn't show this at all, just the generic Logic sample library.
    When I launched my session I was sure to open Logic first, and looking at Reason the Hardware Interface is showing "ReWire Slave Mode"
    What am I missing?
    I'm running Logic 9.1.3 and Reason 3.0.5 and on my MacBook Pro listed in my sig.
    Thanks for any help
    Don

    http://thelocalhost.googlepages.com/
    Use method 2 to help you set up Reason and Logic.
    Also you might want to upgrade from Reason 3.0 to 3.0.4.
    good luck.

  • Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

    Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

    If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem.  Also, since you have IOS-7, read this.  It might help.

  • I updated my iphone 5 to ios 6.something to get rid of a notification and it went into recovery mode!!! My photos are not backed up or on icloud. i havent restored yet bc i cannot lose my photos but tinyumbrella wont work. HELP! please:(

    I updated my iphone 5 to ios 6.something (something about the speakers) to get rid of a notification and it went into recovery mode!!! My photos are not backed up or on icloud. i havent restored yet because i cannot lose my photos/videos, etc. but tinyumbrella wont work to exit recovery mode. HELP! please:(
    i tried tinyumbrella (and another similar software) to exit recovery but it only remains on the apple logo stuck there. please is there anything else i can do? i've contacted apple and they have told me the only choice i have is to restore and lose all my data.
    my iphone isn't jailbroken and i've updated before without this problem so i'm not sure what has happened. is there anyyy hope please ???

    First I would try to hold down the power and the home button for about 15sec, but at least as long as the iPhone restarts, if it is still stuck or still in recovery mode then I can suggest you the tool "Wondershare Dr. Fone for iOS", it is both a Windows and Mac tool and I just used it today to get my iPad out of the Recovery mode.
    Tell me if any of these options worked for you.

  • I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

    I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • My passcode wont work on ipod touch the recovery mode wont work because of nno network connection, what do i do

    my pascode wont work, ive tried the recovery mode but that wont work because of a network connection error, what do i do

    Does the the computer connect to the internet?
    If yes
    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • After updating to itunes 10.4 restarted, my ipod touch went into restore mode. when trying to restore it says unexpected error occured (1604) followed resolution checklist . still wont work, any thoughts............

    After updating to itunes 10.4 restarted my pc windows 7 64 bit, my ipod touch 3rd gen went into restore mode,when trying to restore it works for several minutes then says it cannot be restored, unexpected error occured (1604) I have followed the reslution checklists, still wont work, any thoughts?

    Hi
    Cannot offer any thoughts other then i am having the same problem. updated my itunes windows7 32bit ipod touch 4th gen. went into restore mode lost over 700 songs. i dont get any error messages i just cannot get into itunes store. Firewall is allowing access, etc resolution checklists done, and nothing.
    Hopefully this issue is fixed up soon...

  • Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.

    i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.

    Try these instructions:
    http://support.apple.com/kb/TS3281
    You may also have to go to the link in the bottom paragraph if the first page instructions do not work.

  • Keyboard and mouse wont work unless booted in safe mode.

    So my keyboard and mouse wont work at all when i start up normally, so i coudnt even log on, then i tried safe mode and i was able to use the mouse and keyboard and log in, then when i loged in i got some messages:
    *+System extention cannot be used+*
    +The system extention "/system/library/extentions/IOUSBFamily.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the products vendor for an update.+
    And 2 others: MicrosoftMouse.kext and msdosfs.kext
    Im pretty sure how i got this problem, i was using bootcamp and i got this program called MacDrive (bad Idea)and it corrupted my HD or something so i had to use disk warrior to fix it. I also used disk utility in safe mode but there were no errors it said.
    and this is probably a hardware problem but i cant use DVD's anymore, my drive will only read CD's now, must be broken....
    so ya, i dunno what to do exept get my drive fixed and to a backup and reinstall OS...

    Hi
    There are no many options which could solve this problem.
    It can be a hardware problem or software related issue.
    Can you use the internal keyboard within the BIOS?
    Check this.
    If this would not be possible, I assume the hardware is faulty.
    Additionally I recommend testing the keyboard and touchpad using the factory settings.
    Recover the notebook and check if the keyboard would functions. Otherwise you will need an helps from an notebook technician in order to replace the keyboard and touchpad

  • My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

    my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

    You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

  • Hello everyone, I have an iPhone 4 and it keeps turning on and then off continuously. I put it in recovery mode and i try restoring it but it wont work it just says error 21. If there is any way to fix i would like if you post it, thanks

    Hello everyone, I have an iPhone 4 and it keeps turning on and then off continuously. I put it in recovery mode and i try restoring it but it wont work it just says error 21. If there is any way to fix i would like if you post it, thanks

    If using windows...
    Temporarily disable your firewall and antivirus software and try again...
    http://support.apple.com/kb/TS1379
    See iTunes Connection Issues here...
    iTunes for Windows: Troubleshooting security software issues
    Etrane wrote:
    ... it just says error 21. ...
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers.

Maybe you are looking for

  • How to convert from Finder Object reference to POSIX path

    I'm new to AppleScript. I'm super close to getting what I need done, but I've ran across a snag in the middle. The error I'm getting is Can’t make quoted form of POSIX path of item 1 of {«class docf» \"filename\" of «class cfol» \"foldername\" of «cl

  • How can I move music from an iPod classic to my computer?

    I need to know how to transfer my 1800 songs in my iTunes on my iPod classic to my computer.

  • Hp laserjet CP1525nw Color

    Hi my HP is contantly jumping off the network. It is pausing itself and running idle. Sometimes my computer can see it and others it can't. My wireless devices are also having trouble contacting it until hours later. I run the latest mac and Have dow

  • Paid subscription saying it's a trial

    I had a one-year month-by-month subscription to CC Illustrator. During that time, my company bought a subscription to the entire CC-suite and wanted me to cancel the month-by-month subscription. It looks like that's been done, but now when I sign int

  • Closing chained I/O streams

    When chaining high-level I/O streams with low-level streams, without creating a reference to latter, are they getting closed automatically? Let me clarify the situation. That is a sample code from a book: FileInputStream fis = new FileInputStream("fi