Reason behind the Vertical lines while iphone asleep

Whenever my iphone was asleep for more than 10 or 15 min, some vertical lines appeared on the screen to last only a few seconds and then dissapear. I had no idea why this happened until a couple of minutes ago.
I noticed that although they only lasted a few seconds, it was definitely a pattern.
I now know what is the source of the problem.
*I had configured my iphone to fetch data every 15 min (since my gmail account is not push). As soon as the phone was asleep, whenever it was time for the iphone to fetch data (while asleep), the vertical lines appeared. Now I know that it happens only when I have that option ON, since when I changed it to fetch manually, the lines did not show.*
Any ideas why this happens? Is this a software or hardware issue?

Hi. I recently updated to software vesion 2.0.2 and started to notice the vertical lines you describe. I had never noticed them before. I have spoken to Apple iPhone tech support and they say they have never heard of this issue. They have asked me to do a restore on the phone via iTunes to see if it is a software or hardware issue. If it still happens after restore they told me to go to Apple store to see about a possible replacement. I have tried the resore and so far I haven't noticed the lines but it is early days.
By the way I have noticed the lines appear randomly and sometimes when I receive an email and get the audible signal I can see them.
Let me know how you get on if you try to restore iPhone

Similar Messages

How to Remove the Vertical Line in Forward Mail

when using apple's mail program how do I remove the vertical line when I forward email ?
Thanks

If you are doing this on an iPhone:
For forwarding or replying to an email without the Blue Vertical line to the left of the text...
- Open the email
- Select Forward or reply (this will open a new window)
- Select All of the text in the new email.
- In the pop-up bar that says "cut, copy, paste" select the right arrow for more options.
- Select Quote Level
- Select Decrease
Voila!

SAP Version to be added in the subject line while posting a question.

Hi,
We all have been posting and answering thousands of questions on the SDN. Many times I have seen moderators asking the person who posted a question to use a correct and informative subject line.
With respect to that, I would like to suggest the moderators to add a rule in the rules of engagement asking the users to provide the SAP Version in the subject line while posting questions.
This way the person answering the question can appropriately provide information based on that version only and would save the time and effort of everyone.
Example subject line can be :
ECC 6.0 Function module xyz is not returning correct results.
I would like to know the opinion of other users too on what they think about this suggestion.
Best regards,
Advait

In theory - a very good idea.
In practice - hard to enforce.
On second thoght, it could be a required parameter. It might have the added benefit of dissuading questions from people who can't figure out which version they have
Rob
Edited by: Rob Burbank on Jan 16, 2009 3:56 PM

I have version 10.0 and this week the vertical lines in tables stopped showing up, they appear and then disappear, does not happen in any other browser.

When I have a table with columns, the vertical lines show up and then disappear. The right side and bottom lines show up and the top and left side lines are very light with no vertical lines showing to separate the columns.
This just happened this week. It does not matter what size I make the screen, once they disappear, they do not show back up. IE and Google Chrome have no problem with the lines showing up.

Does it help if you resize that window one or more pixels?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

HP Officejet Pro 8610 bought 2 weeks ago. giving vertical lines while printing.

Dear Sir,
I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times.
i just check that when i am printing any paper from windows photo viewer,there are lines like this.
but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

Dear Sir,
I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times.
i just check that when i am printing any paper from windows photo viewer,there are lines like this.
but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

Strange vertical lines in iPhone app icon

I've imported a standard non-transparent PNG into Xcode 3.2.3. The icon is displayed just fine in Photoshop, Finder and in Xcode's preview. However, when the icon is built into the app and displayed on both my iPod Touch and in the iPhone simulator, light black vertical lines have appeared, aligned with the left-most and right-most black pixels in my icon.
Here's a screen shot showing the buggy icon above and the correct icon below:
http://tinypic.com/r/2nsazaw/3
Has anyone seen this before? What can I do to fix it? I've used this same image with a white background and saw no problems.
Message was edited by: VisualCSharp
Message was edited by: VisualCSharp

Somehow, the problem was fixed (???).
Some additional info about this image:
- Created in Photoshop CS3
- Background color in question is #e6f2ff
- Adjusting the hue of the color to 0 degrees (light red, #ffe6e6) yields a correct-looking icon
- Adjusting the hue BACK to blue #e6f2ff yielded a correct image
- The only different between today and yesterday was that I restarted my OS
FWIW

Thin vertical lines on Iphone 4 screen.

I have thin vertical lines going down my iphone 4 screen. It started with one line on the far left side of the screen but two more have appeared within the past month. what is wrong with my iphone and can it be fixed?
I have placed an orange outline around the thin lines i speak of.
Please help!

Restore iPhone.
If this is not working your iPhone display is broken.

Qosmio G30-137 - Video card issue - the vertical lines bug

Hi members,
today my Qosmio G30-137 started making troubles showing vertical lines which look like this:
After using product recovery disk Windows was unable to initiate first start and came up with a bluescreen with the error-code:
+page fault in non-paged area STOP 0x00000050 (0xC09C3044, 0x00000000, 0X804DA90AA, 0X000000002)+
This basically indicates that memory - either RAM, L2-Cache or Videomemory died. But i also learned that the graphic card can be smoked.
After the blue screen you wont get the system into normal working condition, no matter what you try.
I would strongly advise to check if your Qosmio is under warranty and see your dealer for exchange. Fortunately i bought mine 2006/06/06 so its still under warranty (even if just a view days left).
Additional information: another member of this forum had a similar problem and reported that the whole motherboard has to be changed which causes cost of USD 700.00 and up!
I will let you know what i ended up with.
BRgds
The Q

Unfortunately, this sounds like a serious hardware issue as the other member suggested, the GPU (graphic card) could be faulty and therefore the replacement is necessary.
The point is that the GPU is soldered on the motherboard and its not possible to remove the graphic chip from the board. In most cases the whole motherboard must be replaced to solve such graphic problems.
In my opinion you should contact your ASP as fast as possible.
The technicians should be able to help you explain the whole situation and you issue and ask for the further handling.
Good luck buddy

Skip the empty line while processing

Hi all
i'm reading from a file and i want to skip the empty line and process the line which has some data, but it seem that i doesnot process the "\n"as an empty line
for example i have the following data
i went to school
(empty line)
5 days a week
(empty line)
and i have the following code
    while((line = in.readLine() ) !=null)
             if(line!="\n")
                  codes=line.split("   ");
                  }//if else
                  else
                  //do nothing
                  }

thanks dmbdmb
it works
may i ask another question
i have a file which has several sentences but the spaces between these sentences are not unique i.e some time 3 empty lines some times more or less
i have a code to make all the spaces just 1 between any sentece but it work with system.out.print but not with files any ideas
here is the code
        StringBuffer buffer=new StringBuffer();
        try{
            BufferedReader read=new BufferedReader(new FileReader(fname));
BufferedWriter br = new BufferedWriter(new FileWriter("111.txt"));
            String line=read.readLine();
            boolean isNewLine=false;
            while(line!=null){
                if(line.length()==0 && !isNewLine){
                    buffer.append("\n\n");
                                   isNewLine=true;
                }//if
                else if(line.length()!=0){
                    buffer.append(line);
                    System.out.println("in ELSE");
                    isNewLine=false;
                }//else
                line=read.readLine();
            }//while
            br.write(buffer.toString());
             read.close();
       br.close();
        }//try
        catch(IOException ioe){
            ioe.printStackTrace();
        }

Help!! Can't see the indicating line while playing in Audition 3.0

Hi all,
It's my first post here.
I now got a problem as the same time I re-installed Windows XP and Audition 3.0 some months ago: I can't see the indicating line (I don't know how to describe it, or moving line?) while playing in Edit View. So I wouldn't know where it play to. Anyone can help? Thanks from nusushika~ XD

Hi mikromidas, thanks for replying~
Yes, I have and AMD X2 3800+ processor.
Do you mean the AMD X2 optimizer patch? I followed your instruction and everything seems good at this time. Thank you very much. XD

Can't see the Vertical line command in the main window of SAP Script.

Hi,
I have a peculiar situation where, I am not able to see the command through which vertical line separators are coded in the script within the main window. Can any one help me find this...?
Regards,
Owais...

Hi Ravi Kant,
       What does this mean?
/E           ITEM_YWERT
WH           &rwerter-wert(10)&,,&vline&
/E           ITEM_TAB
/:           CASE &VARPOSR-YZEILE&
/:           WHEN '0001'
/:           DEFINE &TAB& = ',,'
/:           WHEN '0002'
/:           DEFINE &TAB& = ',,,,'
/:           WHEN '0003'
/:           DEFINE &TAB& = ',,,,,,'
/:           WHEN '0004'
/:           DEFINE &TAB& = ',,,,,,,,'
/:           WHEN '0005'
/:           DEFINE &TAB& = ',,,,,,,,,,'
/:           WHEN '0006'
/:           DEFINE &TAB& = ',,,,,,,,,,,,'
/:           WHEN '0007'
/:           DEFINE &TAB& = ',,,,,,,,,,,,,,'
/:           WHEN OTHERS.
*           Tab. not defined
/:           ENDCASE

Help to eliminate the vertical line in replying to an email in iCloud on a Mac

I have searched for an answer to this without luck! Any help gratefully appreciated.
If I reply to an email, I get a blue vertical line the length of the received mail.
In subsequent strings the number of lines increases for each email, with text in different colours. With a message that has a number of vertical lines on the left side, I can't delete any of them to simply forward the email clean.
I don't use Apple mail, sending everything through iCloud via Google Chrome. I have looked at system preferences aswell as those for iCloud and Chrome without success. Previous posters have suggested unchecking the 'quote level' but I cannot find where to do this.
I have a Macbook Pro running 10.8.4. Thanks.

Hi,
In tcode SE80, select BSP Application and put SWN_MESSAGE1 in text field. So, you can see plain_indiv and plain_multi HTML. If you click-on this you can see the layout and the standard horizontal line.
If you want to change it, you have to copy this BSP and create a Z one and change the layout. Now, in tcode SWNCONFIG, go to Message Template and change BSP-URL.
Regards,

What was the original reason behind the 1.5 interface?

Anyone knows? The fact that the update pops up in "Software update" makes no sense to me if it's only intended for a small majority of users. Any thoughts about why the MBPs were shipped "crippled" to start with?

Haricot wrote:
Right. But I've been using macs since 1984 so I know what to do when I see a firmware pop up but do you really think I'm in the majority? The majority is going to install the firmware.
Yes, but 'the majority' are unlikely to perform hardware upgrades themselves, and so, will be unaffected in any case.
So my original question was: What were the motives of Apple behind the original 1.5 interface?
The answer above still holds - we are users like you, and have no insight into the thought processes of the engineers at Apple. You will not get an answer from Apple here. Of course, you are free to while away the summer hours waiting for one...

TS3824 How do I get rid of the vertical lines in the middle of my ipad screen

There are vertical lines going across my ipad screen. Right in the middle of the screen. Most are grey and white. But the lower half has greens and light grey. Does anyone know how to get rid of these?

You'll probably get a better response in the iPad forum:
https://discussions.apple.com/community/ipad/using_ipad?view=discussions

What can I do about the vertical lines on my iMac screen?

For the past few days there have been 2 lines, one a solid, definite white, the other faded toward the bottom. It's been almost 5 years since I bouight it, so out of warantee, but isn't there some solution, other than (ouch) buying a new one?

Had the same problem but with red vertical line to right of screen. Called support and was told this was either a problem with screen itself or video that is displaying lines on screen. Support was very patient and talked me through shutting down mac then holding down certain keys ( I forgot which ones) as I turn the power back on. Try calling support. Hope this helps.

Reason behind the Vertical lines while iphone asleep

Similar Messages

Maybe you are looking for