Reason code field in grayed out when trying to change the document via FB02

HI
I am trying to change a document via FB02. When I try to add a reason code to this document by giving these details in additional data segment of the document I am not able to do so as the field is grayed out.
Kindly advise me how to proceed with it.
Regards
Shiresha

Hi,
Go to Tcode - OB32
Click on new entries
Input the following -
Field name = BSEG-RSTGR
Select Field can be changed
Save
This is will make the field editable in change mode.
Regards,
Mike

Similar Messages

Remote control kicks you out when trying to change the logged in user by clicking on the red N

I'm running Zen 6.5 with the latest updates and the latest agents... I can
successfully remote control a workstation through ConsoleOne but I have 2
issues:
1. If I'm in the middle of a remote session and I right click on the red
N icon and change the user, it kicks me out and says "operation is
currently disabled for the logged in user".
2. Whenever I log in it changes the desktop background to blank (it's
actually a blue background) and it doesn't change it back after I close
the remote session. If I physically go that workstation and logout and
log back in, it still keeps that same blue background.

Gilbert,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Am working with trial version of photoshop elements 12. Layer functions remain grayed out when trying to use.

I'm working with trial version of Photoshop Elements 12. Layer functions remain grayed out when trying to use them.

You need to have an image open in the main window.

HT201364 since I updated my system to Mavericks my computer colour is always grey. I have tried to change the colour via system preference without any success. What should I do to so that my screen will be colourful?

since I updated my system to Mavericks my computer colour is always grey. I have tried to change the colour via system preference without any success. What should I do to so that my screen will be colourful?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Drag the image file into the editing window to upload it. You can also include text in the reply.

Error when trying to change the Query in Bex??

Hi Gurus,
I have a query based on infocube. When I am trying to change the query, its giving me the error "This component was edited with a more recent version of Editor. You also have to use the more recent version to edit further. Further processing not possible. Update your front end".
Please help with this.

Hi, I am actually stuck here. Can you please let me know which among these is the higher version.
1) Final Release 3.50
Version 3500.3.016
2) Final Release 3.50
Version (Revision 481)
Because it is working fine in the 1st one whereas its throwing that error pop-up in 2nd one(as soon as we select the Change query global definition option) .

System preferences freezes when trying to change the date

Hey guys,
I've got a MacBook Pro running OSX 10.4.1. I'm having a problem with trying to change the time/date settings. Either going through the system preferences window or accessing it through clicking the clock in the top right and then 'open date & time', I get the spinning wheel and System Preferences crashes. Any ideas why?
Regards,
Phil

You are probably running 10.4.10 in as much as the MacBook pro's came out well after 10.4.1 was released. In any case try deleting the file com.apple.systempreferences.plist in your user/library/preferences folder.

Password field grayed out when trying to connect via BeX

Business Explorer SAP Logon screen password is grayed out and user can not type in. We've ruled out the possibility of SNC being turned on for this BI QA system connection.
User gets the following error message:
Missing SNC_LIB=... in connect_param in RfcOpenEx
Any ideas how to activate the Password field or what this error message means?
Any help is greatly appreciated!
Thanks in advance.
Edited by: Ivan Colakovic on Jan 28, 2008 12:19 PM

Hello,
I got the same problem when I tried to use BEx Analyzer to connect a BW system and I also tried to solve the problem followed your guide, but failed. I am wondering what is SNC Library and how and where I can find it's content, after this I can put it to SNC_LIB=.
Thanks in advance

Help! The "publish" option is grayed out when trying to publish to Facebook blish to Fa

The problem is stated above - the grayed out option when trying to publish to Facebook...

Try the fix posted from Franchi Panchi in this topic: My publish button on iphoto is grey and...: Apple Support Communities.
OT

SCOM Agent Grayed Out When Trying To Monitor Domain Controller

Hi i am trying to monitor my domain controller from SCOM 2012 R2. But it is grayed out. I tried to restart the Monitoring Agent Service of DC. After this agent was showing healthy state but after some time it was gray once again. Repeated this process again
and again and get the same result. I have also read many blogs related to this problem and all of them are saying to run HSLockdown.exe /A "NT AUTHORITY\SYSTEM" to allow this account. Also tried this approach but this command is not working. The
command is not running. Please help.

Hi Abhishek, if you'd like more information on the HSLOCKDOWN util, then check out the links below:
https://technet.microsoft.com/en-us/library/hh212737.aspx?f=255&MSPPError=-2147217396
http://thoughtsonopsmgr.blogspot.com/2009/09/hslockdown-explained.html
Gray agents could be caused by several issues, and without a detailed description of your SCOM configuration, and issues, it would be hard to pinpoint the root cause. Here's a comprehensive article on troubleshooting grey agents, that should guide you in
your remediation efforts: http://support.microsoft.com/en-us/kb/2288515
If you've found this post helpful, please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
MrChiyo | My blog: Technical | Twitter: MrChiyo

Pan & Zoom option in Overlay Creator disabled/grayed out when trying to create scrolling text

Hi all,
I'm trying to create a scrolling text frame using the Paste Into method. I've created a long text frame, cut it, pasted into another frame. When I go to the Overlay Creator and click Pan & Zoom, it tells me to select a cropped image. I've tried an identical work flow on another computer and it works fine - the pan only radio button is available.
I've reinstalled the CS5 extensions, restarted my Mac and I can't resolve the issue. I only downloaded the extension tools last week, so I'd hope they aren't too out of date now. The About screen tells me I'm on 11.4.2.20111116_m_671500 7.0.3.13
Any help appreciated.
Adam

The best place to get the new builds is the DPS Dashboard (https://digitalpublishing.acrobat.com). You can also view the detailed help topic about installing:
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html
If you install the Folio Producer tools and then the Folio Builder panel, you should be able to sign in just fine. Let us know if you still get the error.

Serial number field is grayed out when re-installing

On a once working system(NT), I started getting "can't start NI488" errors... in event viewer I see that "GPIB Device class driver depends on GPIB board class - not found" and another similar event error that states "GPIB class driver requires port group - not started". I have un-installed and re-installed the software and board several times with no effect. I suspect the problem is that during the install process when it comes time to "configure" the board, the serial number drop-down box is grayed out and cannot be accessed. I have verifed the PNP setting are "off" in the BIOS as noted in the one related article I found in the knowledge base.
Any other thoughts would be most appreciated.

Hi
I'm a little bit stumped too. Be sure that NI-488.2 is at least version 1.60 (I'm not sure,but I think that's the one on your CD), otherwise download it from our website.
Things you can try (again).
1. Remove all PCI boards you have.
2. Remove NI-488.2 under Add/remove programs
3. Clean the registry with a "registry cleaner". Don't forget to make a backup of the registry first.
4. Clean the registry by hand. Search for GPIB entries and delete them.
5. Install again the GPIB driver.
6. Configure the board.
Hopefully that works, otherwise you have to think about the last step. ---> Install NT again. Unfortunately without guarantee that this will help.
Luca P.
Application Engineer
National Instruments
Regards,
Luca

My DVD Player hangs when trying to change the regional code the first time

Hello,
I am new to this forum and I couldn't find one for the DVD Player specific so I chose this one. Please direct me to a different one if my eyes were misleading me.
I have a new Macbook. Just over three month now and I attempted to watch a movie with the DVD Player last night the first time. When inserting the DVD, the DVD player comes up with a Screen asking me to change the Regional Code from 6 to 1. I don't understand this in the first place since I purchased my Mac within the US. But anyway, When I unlock it with my password and then click the "Set Regional Code" Button (Regional Code preset to one at this time), it turns blue and then the rainbow wheel for being busy shows up. Unfortunately it never leaves and going to the activity monitor it says (Not responding). That causes bad Windows Memories .
Tried multiple ways, let it run for 10 hours and it never returns to the world. Very frustrating, since this is the first time I tried to use this feature.
Is there any advice on how to set this to Regional Code 1. I only have to set it once, but I think there must be an option.
And yes, I know of VLC, but I still would prefer to use this regular DVD player. I think this should work somehow.
Computer out of the box, nothing other then iWorks and MS Office 2008 installed.
Any help is appreciated.
Thanks a lot
The Dark Lord
Bernd

Does the account you are using have admin rights? I found this :
http://support.apple.com/kb/HT2397
+In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted. Accounts that don't have administrative privileges must authenticate with an administrator account name and password, because changing the drive's region code requires administrative privileges.+
Sounds like it might be worth a try from an admin account first.

The textbox for setting a start page is grayed out, and I cannot change the start page.

When I go to Options form, the textbox for "Mozilla Firefox Start page" is grayed out, and unchangeable. If I navigate to a page, then set that as my start page, closing and restarting Firefox reverts back to the Firefox/Google startpage - my home page setting is not being saved.
I have tried resetting Firefox, restarting with add-ons disabled, even deleting and recreating a new profile, but it still does this.

Well, I lack the sufficient administrator privileges to uninstall the current install of Firefox, but - oddly enough - not to install a new copy to another folder.
So I installed the software, and viola - it worked!
Thanks!

"Unkown Error (-50)" when trying to change iPod settings via iTunes

Hello everyone.
I got an 5.5 iPod Video (30gb) for christmas and I can't update the name of the Ipod nor change the settings for music, TV shows, movies, podcasts, pictures or even reset it!
I can however sync music, tv shows, movies and pocasts (not pictures).
So I called Apple the other day and told them about my problem. The guy I was talking to told me that the only option avaible was to send the iPod to Apple and have them repair it. And so I did. It came back today with 1.2 update installed, instead of 1.2.1 which I used before I had the iPod sent for repair. The enclosed papers said that they (Apple) could not find any problems on the iPod itself and it's batterys and that "it met Apples specifications for acceptable performance, usablity and/or functionality."
Yeah well... It doesnt. I'm using a PC with Windows XP, Service Pack 2 and I have USB 2.0. I have the latest version of iTunes and I had the latest firmwire update for my Ipod (1.2.1) and it didn't work.
When I first plugged the iPod in today when it had version 1.2 installed it worked, but the next time I plugged it in.. well, it didnt work. So right now I'm using 1.2.
I've tried re-installing iTunes and restoring the iPod via both iTunes and on the iPod itself. Nothing works. Can someone here help me out?
Btw. I'm using an iPod dock.

Edit: I am able to change settings WHILE my library is beeing synced...

Ext_auth_setup_err when trying to change the password

Hi Gurus,
I have a portal user account called rob.o'[email protected]
I have a custom(jsp) change password page for changing the portal password. All the other users are able to change their password without any problem. When this user tries to change his password, he gets "ext_auth_setup_err" error and it shows "ROB.O" under user name on that page. Can you post a reply if you have some idea on how to fix this.
This is what I have to get the user name
String str_user = request.getParameterValues("p_username")[0];
Thanks
Raj
------------

Richard
For some reason changing the password from Disk Utility > Images > Convert. (be sure you name the image with a different name for the duration of the process otherwise you will get a "Resource Busy" error message). When you choose convert enable the encryption option and re-save the image. When done you can rename it to its older name in the finder.

Reason code field in grayed out when trying to change the document via FB02

Similar Messages

Maybe you are looking for