Reason for errors in IDCOS ? pls tell small scenarios

hi pls tell practical scenarios reason for errors in idocs? all ale configuration are done.

For a million reasons, but the most obvious one is that data in the IDoc doesn't match with the data in the receiving system. Eg. in IDoc field plant filled with 'PL01' but this plant doesn't exist in the system.
Regards,
John.

Similar Messages

Reason for errors in IDOCS ? pls tell small scenarios

hi pls tell practical scenarios reason for errors in idocs? all ale configuration are done.

goto se16 and look at table EDIDS....in that look at field status text...you will see different reasons when something goes wrong in idoc generation...
there should be a lot of practical scenario examples for you inside it...

Error in phase: DISASSEMBLE Reason for error: PATCH_FILE_READ_ERROR

Hello All
I am applying support Package: SAPKB70009 on SAP ECC 6.0 for component SAP_BASIS with release 700.
I am getting following error
The import was stopped, since an error occurred during the phase
DISASSEMBLE, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
 - Error in phase: DISASSEMBLE
 - Reason for error: PATCH_FILE_READ_ERROR
 - Return code: 12
 - Error message: OCS Package: SAPKB70009
Guys can you please shed some light on how to solve this issue.

Hi,
There might be 2 reaons for the error.
1) corrupted files in EPS/in or improper CAR of the files.
2) the file permissions in EPS/in check whether the files are having proper permssions like 775 with owner <SID>adm
-Srini

Unknown reason for error code 36331 in DAC run

Hi,
While running full load i am getting following error
Can any one give me the solution
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_123 -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 01:41:19.126 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

HI Srini,
I had copied Src files from BIApps to informatica Src file
While running DAC11g full load, we are en counting some issues below is the error we are facing
ERROR CODE - Unknown reason for error code 36331
one more thing to consider, In DAC10g we give /Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SrcFiles as Informatica parameter path in DAC system properties but in DAC11g if i take same path no task is running, it is failing at first task only and no parameter file is generating.
But if i give dafault in that Informatica parameter path of DAC11g some tasks are running success and i am able to see some parameters generated in DAC PATH, but Default is taking
/Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters path for that location.
Informatica Server details are Success, Physical Data sorce are success.
I had copied SrcFiles and LkpFiles to informatica from BIApps.
ParameterDW and parameterOLTP are moved to /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters as well as Informatica Src folder
for one task below is the error
2013-02-07 21:50:17.515 Acquiring Resources
2013-02-07 21:50:17.517 Acquired Resources
2013-02-07 21:50:17.519 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 21:50:46.989 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

Possible reasons for error 1074396005 invalid avi session

Dear All,
I am working on creating and writing frames on to AVI files. I need to start writing frames up on record on command and close the AVI file up on record stop command. I am trying to read frames from an recorded video and write in to another AVI file.
But i am observing Error 1074396005 invalid avi session, whenever i run the code. I am using AVI2 VI's (IMAQ AVI2 Create, AVI2 Write and AVI2 close).
I am using LabVIEW 2013 SP1 and Vision development module versions.
Below is the block diagram for reading an avi file and writing in to avi file upon record on command (numeric control value 1 to case selector)
Block diagram for record off
Below is the error observed:
Kindly suggest what would be the possible reason for the error.
With regards,
Sri
Attachments:
Block diagram1.PNG ‏59 KB
avi2 error2.png ‏381 KB
Block diagram2.PNG ‏20 KB

Might be good if you can post the code instead of screenshots.
-If session was closed or aborted due to some reason you should get this error.
-Multiple times you are creating the session inside the loop with same avi session, is it required?
-Are the images added to the avi file?
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Possible reasons for Error 30005?

Hi All,
we're on ep7, sp12..we've been encountering the foll error lately when we try to use any BI query frm one particular BW system..(holds true for all users)
when we try to drag the query to the iView, we get the Error -30005, Cannot create the BI data service, Cannot add BI data service to the iView.
the strange things is we can search for queries. however, upon attempting to see the characteristics, etc we get the foll error: "Error -30027 Cannot retrieve structure, Cannot read query description.."
Could anybody pls advise on the possible reasons/resolutions for this?
thanx
prachi

Hi Prachi,
I feel with you. I have the same problem and just a few hours ago everything was working fine. thats very strange.
Mark

Reason for Error "Unknown field type (28) encountered."

Hello,
I'm from Germany, so sorry for my English first.
I got the error "Unknown field type (28) encountered." when I run
a simple "SELECT * FROM system.functions" on my ADD-Database.
The solution for this problem is found in the KBA 2145730.
If I use the ADS DLLs v. 11.10.0.22 I got the error, but if I use the
ADS DLLs v. 9.10.0.35 everything is fine.
For solving other problems I think it would be better to use the newest
version, but in this case I can't. At this time it is not a problem, because
I can't find any real reason so that I must update for now, but nevertheless
I'd like to know, why this error occurs. What is type 28? Or (what real
would be great) can I make changes to my software, so that I can
avoid this problem? I hope you can help me with this "riddle" and wish
all of you a great day.
Greetings from Germany,
Gerit Freericks

For backwards compatibility the server will send different field types (i.e. char vs varchar, ansi vs unicode, etc).
The server determines this based on the ACE (Advantage Client Version). By swapping in new DLLs you are telling the server that you are running a newer client and it can send the newer field types etc for the system tables.
In addition to swapping the DLLs re-build the application with the new TDataSet (re-compile) and this should resolve your issue.
For the field types look at ACE.pas (or ACE.h) in the TDataSet (on the latest). It looks like 28 is an NMEMO (Unicode Memo field)

Reason for Error in Manual Update of Data Package

Hey,
Sometimes while loading huge amount of data, one of the data package doesnt get uploaded. For those data packages we do a manual update of the data package and it works well.
My question is why do we get this error,
Is it to do with the system contention or any IDOC issue?
Please help me out to find the root cause of this, so that we can avoid the manual update of the data packges.

We usually get this issue , when we are doing a lot of processing in the Update Rules. The Data package processing gets timed out.
If it is happening very often then you would need to sit with your Basis person and modify the Timeout settings for your system.

Reason for Error JBO-25043?

Hallo,
i've got Error JBO-25043 in my Application. But i can't identify exactly why? what can i do to find the place where the error is born?
any help is appreciated.

Hi reiasmus,
Hope that can help:
JBO-25043: InvalidParamException
Cause: Extraneous key passed in to findByKey(). For example, suppose the View Object may expect no more than a two-part key, but the key passed into findByKey is a three-part key. Then, this exception will thrown.
Action: Provide a valid key.
found here:
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtTopicFile.bc4j%7Creference%7Cbc_errormessages~html/
Regards,
Tif

What are possible reason for error : FRM-40657

Hi,
There is 3 blocks in my form, Master Block, It's Deails and It's Details also.
The Query Data Source for all the block is Procedure, because for each block the data is coming from one more table other than the DML table.
But I am getting the error FRM:40657 while editing the data, the flow of the system is, if the data in the block satisfy certain condition, then that row should be saved to DML table. For eg, there is one column Status if the value of the status column is Valid then that row should be saved to DML table, all the data coming from the non DML table is InValid, and the data from DML table is Valid,
but after loading, when I change InValid to Valid, because some rows the user want to change to Valid then obviously it should be saved to DML table , but I am getting this error, What could be the pblm...
Thanks in advance

Hi Mark,
Thank U. No other user has updated the data. As I said, the problem occuring datas are coming from Table A, and let the user to modify the data, after the modification, copy of some records (based on the data after modification ) want to be saved to DML table, say Table B. But this error is getting while try to save the modifications. But no problem to save the DML table (Table B) data.
Hope U understood the requirements. Thanks in advance.
Rizly

What should be the reason for " ERROR 1004" ? Any means to sort this issue. It comes up on my screen when i try downloading any application through my ipfone 4

Hi guys,
I find diffficulty downloading applications from appstore to my fone directl
Each and every time it shows " ERROR 1004 "
Cant understand what to be done.

shaminsharaf wrote:
Hi guys,
I find diffficulty downloading applications from appstore to my fone directl
Each and every time it shows " ERROR 1004 "
Cant understand what to be done.
I think this is your fix...
http://support.apple.com/kb/TS1275

HT4623 my daughter was trying to do an ios update on her new ipad mini it now says to plug into itunes she does not have a seperate computer for that, the reason for the ipad can anyone tell me how to fix this or how to reset the ipad

tried to do an ios update the ipad mini is now asking to plug into itunes, have now seperate computer to do this can not get any other screen to come up on ipad can the ipad be reset or how do I fix this

If it's showing the connect to iTunes screen then it sounds like it's gone into recovery mode and will need to be connected to a computer's iTunes in order to be reset. Does neither she nor you have a computer, and if she hasn't has she been backing up to the cloud instead ?
Depending upon what country that you are in, and whether content is still in the store, she might be able to re-download some/all of her downloads via the Purchased tabs in the App Store and iTunes store apps

BPM for error handling and acknowledgements

Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
Nagesh

Hi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
The following link has entire configuration of Receiver XI Adapter (including acknowledgements)
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
 eror handling in BPM.

1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
Also mark helpful answers by rewarding points

ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR

hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..

hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull.

I have tried downloading about 6 times and this is the message I keep getting. Pls. tell me what to do!!Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR:--- Summary ----- - 0 fatal error(s), 2 error(s) ERROR: Th

I have tried downloading about 6 times and this is the message I keep getting. Pls. tell me what I am doing wrong
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
ERROR: This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.
ERROR: System check returned with error : 6I have tried downloading about 6 times and this is the message I keep getting

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

Reason for errors in IDCOS ? pls tell small scenarios

Similar Messages

Maybe you are looking for