Reason for message: another user connected via Sharing

For a bunch of reasons I don't want to get into yet I was wondering if someone could explain this to me:
If you have a desktop and laptop connected through your Airport (private network) and you close your laptop without logging out of the network and then log onto another (unprotected) network and then go to restart and you get the message that there is another user connected to you via Apple File Sharing could that be your own unterminated connection from your desktop? Or does it mean that someone went into your system? (and if that is the case is there a way of knowing what if anything was opened and/or uploaded?) TIA

Easiest way to look back is with...
With Sharepoints...
http://www.hornware.com/sharepoints/
And...
http://www.hornware.com/afsmonitor/
IIRc, one allows you to enable the logging, then view with the other.... though it says "current" Users, I think it might inclusde history!?
But in the future I will turn the Airport off before putting the laptop to sleep for the night, if that improves the security.
Actually, the reason for disconnecting before Sleep or Moving away, is so as not to confuse the Macs as to who's on first!
During Sleep, the power to the Airport Transmitter & Receiver is cut off to save power... it deaf, dumb, and blind during Sleep.

Similar Messages

File deleted on my mac by another user connected via ethernet. But file not showing up in my trash?

I have 2 imacs connected via ethernet through a router.
A file got deleted from my computer by the user on another imac but it hasnt shown up in my trash or his?
is there a way to find it?

This is normal (if somewhat unfortunate). His system should have warned him that the file would be deleted immediately instead of moved to the trash and asked him if it was OK to to do that.
You'll need to recover it from your backup disk, if you have one.

Customizing single user connection via Windows remote desktop

Hi,
I would like to know if its possible to configure Windows Remote Desktop in a way that if a user is already logged on to a particular computer and another user tries logging in, an error message appears on the screen saying that a user is already
logged on.
I can limit the number of connections to 1 via:
Local Group Policy Editor > Admin Templates > Remote Desktop Services > Remote Desktop Session Host > Connections
However, with this option, the error message that comes up on the screen is the following:
'This computer cant connect to the remote computer, try again or contact the network administrator'.
Is it possible to configure this in a way to let users know why they cant login so they don't think its an IT fault?
We are using Windows 7 on both the clients and the host.
Any advice would be much appreciated..
Thanks,
Seema

Hi Milos,
No its not a server operating system.
The PC that we are connecting to is running Windows 7.
We are connecting to it using Windows Remote Desktop.
Thanks,
Seema
Hi Seema,
As Licensing agreement said, for Windows 7, you can only has one connection on this PC via RDP.
If another user wants to connect this PC via RDP, he will be notified you another user who has already logged in.
Kate Li
TechNet Community Support

Do You have a method of EWS API to set the share a calendar for other another user

Do You have a method of EWS API to set the share a calendar for another user , kindly if you can help as soon as possible i'm going to develop an application and share a calendar events as well ,,, thanks my regards

You can add and remove delegates.
https://msdn.microsoft.com/EN-US/library/office/dn641959(v=exchg.150).aspx This does not work exactly like the sharing feature in Outlook in that no sharing message is sent.

Auto-logout of dialog type users connected via trusted system

Hello,
We have System AAA. In this system we have users 1234 and 4321 of dialog type.
User 1234 logs in via SAP GUI.
User 4321 logs in via trusted system BBB.
We have set rdisp/gui_auto_logout to 30 seconds.
User 1234 is logged off after 30 seconds.
User 4321 is never logged off.
How can we force user 4321 to be automatically logged off after 30 seconds?
Peter

With (Trusted) RFC calls in general you are calling a function module and not a transaction. Okay, the FM might call a transaction in a new task and present it to look exactly like a transaction which had been started locally, but if you look in SM04 on that server then you will see that the protocol is not DIAG but rather RFC for the sessions.
So, what you can do for such current user context trusted RFC calls which are dialog capable and interactive with the SAPGui, is simply call FM RFC_CLOSE_CONNECTION whenever you want the connection to the current user to be closed.
Of course, if the user is fast and your security design is sub-optimal, then even 30 seconds might not help you (from a security perspective).
I remember mention a while ago about a profile parameter which gives you an option to timeout an idle but open RFC connection. I tried a quick search but did not find it again. If you keep an eye out for the legendary term "Wolfgang" when searching together with "auto" "timeout" "logout" etc terms then you should be able to find it with some patience.
Please also see the OSS notes on RFC_CLOSE_CONNECTION. You will find more infos there and possible the optional parameter as well.
Cheers,
Julius

Cannot access another users mailbox via OWA 2013

Hello
I have just migrated a few users from Exchange 2010 to Exchange 2013.
If I try and access their mailboxes via OWA 2013 using "open another users mailbox" I receive the following error:
something went wrong
Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.
X-OWA-Error: SDServerErr;Microsoft.Exchange.Data.Storage.AccessDeniedException
X-OWA-Version: 15.0.995.28
X-FEServer: EX2013
X-BEServer: EX2013.company.local
Date: 07/11/2014 11:23:46I can still access any mailbox on a 2010 server via the same method.
Can anyone assist in resolving this issue please?
Matt

Hi Amy,
Yes Inheritance is enabled.
Just to clarify this is affecting ALL mailboxes once moved to Exchange 2013, not specific users.
There are multiple 2013 databases all with mailboxes on. Each databases is displaying the same behaviour.
Here are the permissions I have checked so far:
ADSI Edit: CN=Databases,CN=Exchange Administrative Group (<>),CN=Administrative Groups,CN=Company
,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=localnet
The AD group has inherited Full Control on all of the database objects.
EAC: The AD group has full control on every migrated mailbox
EMS: The AD group has the following permissions on all mailbox databases:
Identity User IsInherited Deny AccessRights
MDB01 Company\AD Group True False {GenericAll}
I have removed permissions for the group and re-added them, this has made no difference.
The only way I can access any of the migrated mailboxes is to explicitly grant my account "Full Access" via the Add-MailboxPermission command.
Regards
Matt

How do I find the users connected via afptcp

I want to find the list of users connected to an OES2 Linux server.

Originally Posted by ataubman
Start with the documentation Novell Documentation . If you have further issues, please start your own fresh thread with full problem and system details, as your problem has nothing to do with the OP's.
I've already looked at the documentation and have another thread going, I'm just looking for any info from any source. That source may be watching this thread and not the other.

Can't get DNS for laptop on router connected to shared NIC

I have my router connected to my PC on one NIC that is shared. Another NIC connects from the PC to the cable modem. The laptop is able to see and connect to the shared wiresless router but cannot receive a DNS address. No internet browsing. On the same shared wireless connection I have an XBox that can connect and get a DNS response. Also the PC has no trouble connecting to the internet.

It sounds like your network is setup this way:
modem - PC - router )))) laptop
                                 )))) Xbox
Is this the way your system is set up? If so, why?
Most systems are setup like this:
modem - router - PC
                         )))) laptop
                         )))) Xbox

I tunes on my laptop will not find ipad wireless and I get error message if I connect via cable

Itunes on my toshiba laptop ( running Windows XP) does not see my ipad via wireless network at home. If I try to connect via usb cable I get an error message. I have tried re booting both laptop and ipad and have recently loaded new itunes version.
HELP PLEASE?

Check this article: http://support.apple.com/kb/TS3221

Unknown reason for loss of mobile connection. No Service message.

Recently my phone randomly loses connection to the network. I get "no service" instead of my mobile phone provider. Tried a restore - new and from backup. Sometimes airport mode resets the connection. Using iOS 4.3.5. On Orange in the UK. Ant ideas?

Wow! Still no reply from Support Team?
I have the same problem.
iPhone 4 (Factory Unlocked) 32 Gb. FW 4.3.5. iTunes 10.4.1 (Mac OS X Lion). System and iTunes are up to date.
My phone just out of the blue lost connection and has been showing No Service. I tried everything (execpt of Service - as I'm in Russia now - we have no official Apple Service). First times connection might appear online for some time, then lost again. Air Plane switching helped intially - then failed to restore network connection. Here starts an interesting thing - when I rebooted iPhone - I found my phone asking me to connect to iTunes (it didn't seem to be a revocery mode - I was able to see network and battery indicators). When I connected it to iTunes - it some times wasn't able to activate my iPhone (due to No Service), some times it saw the phone but failed to recognize it contents and asked to restore. Many times I performed restore procedure. Another interesting thing was - when I've just restored device - it saw network for some time (20-40 min) then lost it. When I rebooted the Phone....behold......it asked me to connect to iTunes once again!!!!! And this repeates all the time. The only way to use it as iPod - restore with iTunes and DO NOT reboot as it requires activation each time I reboot it.
Thus we have a conclusion:
1. iPhone loses network some minutes after compleate restore to factory settings.
2. It restores the connection if one recovers it with iTunes (or resets network settings of complete iPhone erase), but asks to active it.
3. It asks for activation each time the phone was rebooted.
4. It's not a SIM card problem (I've chenged for another micro-SIM - the same). I also tried SIM cards with another phones - work perfectly (and still working).
5. It's not a Firmware problem (initally I had 4.3.3, then upgraded to 4.3.5).
6. It's likely a hardware error as:
6.1 when I've just restored iPhone - it some times showed 'Searching' till the next restore (I was unable to active such phone).
6.2 Some times it couln't find network just after restore - hence it's defenetely not a sync problem (as I thought for the first times).
6.3 Some times iPhone was connected to iTunes just right after restore - it showed 'iTunes can't read iPhone contents - restore...etc.'
6.4 It seems like a bad SIM-card contact, or some failure in Antena Module. Let me explain why: when phone is on (and show No Service) I eject SIM Card - phone didn't show up 'SIM Card Missing' error. There may be a lot of time past before this message shows up. Just to prove I've checked when I had connection - I ejected SIM Card and I got No SIM Card Installed error instantly. Then I inserted card and iPhone found network instantly too.
7. Some times when I connect the phone to iTunes it can't read Capaty! (shows n/a) and says: "iTunes can't read iPhone's contents - please restore...etc.
Hence I made a conclusion that there may be some hardware mailfunctions in antena/GSM/com module (I don't now how it's called). I hope it's just a bad stub connection of the parts or some minor issues in SIM-Socket.
Dear Supprot Team - have you any ideas or have you had such issues solved yet? As I'm in Russia now - I can't take my phone to Apple Service on warranty. And I don't want to pay much money for unofficial service. And of course I don't want to use my iPhone just as iPod (I paid money not for an iPod).
Please also tell me - when iPhone upgrades to new FW - does it erase all the internal drives and flashes new? Or it rewrites only some system drives? Is there any possibilty thet data from previous sync left on iPhone ?
I think there might be some file system mess during incorrect sync (I have no any other explanation on why iTunes some times can't recognize iPhone's contents and asks for restore even if restore just has been done).

Reasons for "Message Send Failure"?

Today my MMS stopped working. Every time I try to send a photo, the progress bars loads until it's almost full but then I get a "Message Send Failure" notice. Regular texts and call go through just fine though. I'm hoping that maybe it's just AT&T's network? Could it be a more serious problem?

If you can send/receive SMS's but not MMS's, 99.9% of the time the problem rests with your carrier, so contact AT&T.

Another user-modified table 'Items' (ITEM) (ODBC - 2039) [Message 131-183]

Hi All,
Just had an issue reported by a customer. They tried to amend a UDF on an Item Master record and they can change data such as the Item description, remarks etc and update the item successfully... However, when they tried to amend the contents of the UDF's attached to the Item the system issue the message:
Another user-modified table 'Items' (ITEM) (ODBC - 2039) [Message 131-183]
Any thoughts?
Best regards
Earl

I figured it out
We had a UDF name U_Discount that was set to only allow Y or N.
In the database I had a space after the Y or N value for some of the records. I discovered it by running
SELECT distinct [U_Discount], COUNT(*) FROM [OITM] group by [U_Discount]
No idea how the space got there, but I ran
update OITM set U_Discount = 'N' where LEFT(U_Discount,1) = 'N'
update OITM set U_Discount = 'Y' where LEFT(U_Discount,1) = 'Y'
and it fixed it

How to reset password for a web user via GUI?

Hi,
How to reset password for a web user ID via GUI? is it possible?
Thanks.

Hi,
You can reset the pwd for the user through trascn SU01.
BR,
Disha.
*Pls reward points for useful answers.*

Get count of users connected to my application via browser but not through console

Hello,
My requirement is to find the no. of active, connected and disconnected users and
inactive time of each user to
my application on weblogic server 5.1.0 sp-10. when i used console it gives only
count of users connected via
console. I need it without starting console. I tried
http://localhost:7001/AdminMain?refreshSecs=60 but this also works same as console.
I also tried using weblogic api in jsp like below but output is 0;
<%@ page import="weblogic.rjvm.*" %>
<%
weblogic.rjvm.RJVMManager rr = weblogic.rjvm.RJVMManager.getRJVMManager();
int Cc = rr.getConnected() ;
int Dc = rr.getDisconnected();
String Name = rr.getName();
int active = rr.getActive();
%>
<html>
 <head>
</head>
 <body>
Active Users =<%=active%>
 
Disconnected Users =<%=Dc%>
 
 </body>
</html>
Please, reply me asap...
Thank you,
Sandeep

Hi Sandeep,
You might try posting your request to the weblogic.developer.interest.jsp newsgroup.
HTH,
Bruce
Sandeep wrote:
Hello,
My requirement is to find the no. of active, connected and disconnected users and
inactive time of each user to
my application on weblogic server 5.1.0 sp-10. when i used console it gives only
count of users connected via
console. I need it without starting console. I tried
http://localhost:7001/AdminMain?refreshSecs=60 but this also works same as console.
I also tried using weblogic api in jsp like below but output is 0;
<%@ page import="weblogic.rjvm.*" %>
<%
weblogic.rjvm.RJVMManager rr = weblogic.rjvm.RJVMManager.getRJVMManager();
int Cc = rr.getConnected() ;
int Dc = rr.getDisconnected();
String Name = rr.getName();
int active = rr.getActive();
%>
<html>
<head>
</head>
<body>
Active Users =<%=active%>
 
Disconnected Users =<%=Dc%>
 
</body>
</html>
Please, reply me asap...
Thank you,
Sandeep

Get count of users connected to my application via browser but not throuhg console

Hello,
My requirement is to find the no. of active, connected and disconnected users and
inactive time of each user to my application on weblogic server 5.1.0 sp-10. when
i used console it gives only count of users connected via console. I need it without
starting console. I tried
http://localhost:7001/AdminMain?refreshSecs=60 but this also works same as console.
Please, reply me asap...
Thank you,
Sandeep

Hello again,
I also tried using weblogic api in jsp file as below but result is 0.
<%@ page import="weblogic.rjvm.*" %>
<%
weblogic.rjvm.RJVMManager rr = weblogic.rjvm.RJVMManager.getRJVMManager();
int Cc = rr.getConnected() ;
int Dc = rr.getDisconnected();
String Name = rr.getName();
int active = rr.getActive();
%>
<html>
 <head>
</head>
 <body>
Active Users =<%=active%>
 
Disconnected Users =<%=Dc%>
 
 </body>
</html>
"Sandeep" <[email protected]> wrote:
>
Hello,
My requirement is to find the no. of active, connected and disconnected
users and
inactive time of each user to my application on weblogic server 5.1.0 sp-10.
when
i used console it gives only count of users connected via console. I need
it without
starting console. I tried
http://localhost:7001/AdminMain?refreshSecs=60 but this also works same
as console.
Please, reply me asap...
Thank you,
Sandeep

Reason for message: another user connected via Sharing

Similar Messages

Maybe you are looking for