Reason for rejection during "Tech Response & Awards"

Hi,
SRM 7.0 PPS:
We have seen that, In 2 envelope RFx Response, when a bid is accepted/rejected  duing the tech bid response and awards, the system sends a mail to him.
Here, if the bid was rejected, we want to include the "Reason for Rejection", in the mail content. But there is no place to capture the "reason for rejection here".
Any Idea how to achieve this (i.e. 1. How to capture this information, 2. how to modify the mail content after capturing).
Ganapathi
Edited by: Ganapathi on Aug 22, 2011 8:51 PM

Any Ideas please....

Similar Messages

  • Note on Reason for rejection during PR/PO rejection

    Dear Experts
    While rejecting PR/PO by approver, is it possible to give note on reason for rejection in standard SAP? . Also, is there any standard transaction where i can see the entire history of approvals including date & reason for rejection note if available?
    Kindly help me out..
    Thanks & Regards,
    Kumar

    Hai Arminda Jack
    Thanks for your reply.
    The reason for rejection what i have mentioned is purchasing perspective. To be clear, when approver is not satisfied with the datas in PR/PO in terms say qty, price, delivery date, approver will be rejecting the PR/PO. During rejection, approver needs to mention some note(manually typed) during his rejection of PR/PO.
    Kindly suggest.
    Thanks & Regards,
    Kumar

  • Price Inactive during change in reason for rejection

    Hi ,
        I am facing an issue while providing reason for rejection in VA02.The issue is the price shows as inactive if we cancel the reason of rejection for an item(we get pop-up to select if we want to have reason of rejection or not).As per configuration if reason for rejection(vbap-abgru) has a value then statistical field(vbap-kowrr) will also have value as 'X'.So during providing reason for rejection,if user selects cancel we clear both the values(abgru as well as kowrr).But at this moment the price shows as inactive,but if we press update or save the price shows active.
    Please suggest how i can have the price as active after user input,all this is done through an exit 'MV45AFZB'.This is triggered when user provides values for reason for rejection,then popup appears if it satisfies certain conditions.
    Jeten

    Hi,
    Look at the table ORDER_ITEM_IN
    Regards.

  • Popup for entering Reason for Rejection

    Hi Experts,
    I have a workflow which has a user deciision step for approval and rejection.
    On rejecting i want a popup to appears where in user can select the reason for rejection and then exceute the workitem.
    I have tried using POPUP_GET_VALUES . I created a method in my BO and it works fine over there, but when i call it in the workflow i dont c any popup and the wokritem disappears.
    When i check the log, this step is still in READY state and thw rokflwo is hanging.
    Any other approach that any1 can suggest.
    Thanks.

    Hi Aarvi,
    I have similar requirement. Could you please provide some more info on the solution. I am using FM 'CATSXT_SIMPLE_TEXT_EDITOR' to get the popup. I have added this FM in a method and this method is attached to "Method AFTER Work Item Execution" section in Method tab in User decision task.
    Problem I have is, even if I approve or reject, popup still appears. But I need only the popup during rejection.

  • How to enable field "reason for rejection" of view "status" in CRMD_ORDER

    Hello Everyone
    I need to activate/enable field "Reason for Rejection" in view "Status" of transaction CRMD_ORDER though a delivery document is created for the sales order.
    Can some one pls let me know where do I need to code to make field "Reason for Rejection" enabled.
    FYI, the same logic was applied for VA02 as well and the logic is written in userexit "USEREXIT_FIELD_MODIFICATION" which is working fine.
    Apprecriate your quick response.
    Thanks
    Dharma

    Hi Raj,
    Usually we use function module CRM_STATUS_UPDATE to
    change user status in document. But if you want to
    trigger next process or change from certain user status to next status interactively by the system, you can
    use Badi CRM_ORDER_STATUS (here you have after and before
    method).
    Hope this could help.
    Rgds,
    Gun.

  • Sales Order Reason for Rejection Worklist - Report

    Dear Gurus,
    Is there any standard worklist or report where I can have a list, where I can see the list of sales order have "Reason for rejection" status set.
    Looking for the gurus response.
    Regards,

    Hi Imran
      You can see in T.Code VA05.
    --Enter sold-to-party
    --Enter the material
    --Enter the document date
    --check mark on open orders or all orders & enter
    --If you are unable to view the Reason for rejections column display list
    click on settingslayoutscurrentselect the Reason for rejection in column set & transfer to the Display columns.
    Let me know if your problem is solved
    Regards
    Pradeep

  • Reason for rejection for sale order stock existing line item

    Hi,
        I am giving reason for rejection for a line item where there is already sale order stock. Then I am getting a warning message like " there is sale order stock assigned". I want this message to be as error message. Any customisation (SPRO) is there for this?
    Kindly update.
    Ratna

    Dear Rama Rao
    I think, there is no problem you can ignore the warning message and go ahead give reason of rejection and close the order
    There wont be any problem absolutely
    The reason  of warning message is, (it is sales order created with item category with special stock indicator as E )  that means the system tells you that it is extra special stock which you have created and now you are trying to reject hence it alerts you by giving a warning  message
    The item category of the items which you are trying to reject  is marked  or should have been marked with special stock indicator (you can check that in VOV7)
    By double clicking warning message if it is of V4 message class in t code OVAH you can make that as no message
    But i doubt that this is available in OVAH
    Regards
    Raja

  • Sales report based on Reason for Rejection

    Hi Guru's,
    I have a requirment to get the list of sales orders( Open/ Close) report based on Reason for Rejection.
    Please makesure it should be standard not customization and using tables.
    Thanks & Regards,
    Subbu.

    Hi subburamaiah
    If you want the report you can create a separate SIS report . In that take the input field  as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
    Regards
    Srinath

  • SALES ORDER REASON FOR REJECTION NOT WORKING .

    Hi Friends
    Though user mention reason for rejection in preceding sales orders'  line item s,still  those line items are being copied to subsequent documents ( to another sales order and billing document ) .
    Do you feel  there may be  problem is in  standard SAP functionality or I  have to do something in configuration ( copy control )  to restrict it ?. not one sales order , it's happening for all the sales orders .
    Thanks in advance
    Rusheek

    Please check ur copying requrement routine in VTAA must be "301" and "Pos./neg. quantity" must be "+". Check with this configuration,
    If any query please revert back
    Rgds
    Dhirajjjj

  • BAPI_SALESORDER_CHANGE to update reason for rejection of sales order item

    Hi,
    The FM BAPI_SALESORDER_CHANGE is not working properly as I am getting below error when try to update the reason for rejection at sales order item level.
    The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
    error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010  ready for input"
    Request your suggestions to avoid this error.
    Thanks

    >
    anikaushi wrote:
    > Hi,
    > The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
    >
    >  error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010  ready for input"
    >
    >
    > Thanks
    Yes, Most likely.. You can confirm this by trying to change a order without delivery and see if it goes thru (to ensure that you have passed correct parameters)...
    you may have to delete the delivery (and if billing document exist, cancel it), before you can reject the line item... it would be safer to raise an error message and let the users manually delete delivery document as long as you don't have large volumes of this scenario..
    Please see the SDN thread for how you can avoid this error...
    Re: Cancel Sale Order after Issued Billing

  • Dump while supplying Reason for Rejection in sales order

    Hi Gurus,
    when I am suppling the Reason for Rejection ("Cancelled") for a line item in existing Sales Order, the sales order is going to dump,this is the case with production system where as the same is working fine with testing system,ofcourse I am using different sales order numbers for both the cases....what may be the reason...
    Please suggest.
    Thanks for the help....Have a Nice Day..

    Hi
    Kindly post the error details.
    After dump, use t code ST22, click on today, click on the error & analyse.
    thank you.

  • How can I pass value in status and reason for rejection using BAPI_LEAD_CREATEMULTI when creating multiple lead

    Hello,
    I want pass value in STATUS and Reason for rejection according to requirement when i am creating multiple lead using BAPI_LEAD_CREATEMULTI. Please help me how can i pass value. Please give some sample code that in which table i have to pass values and please also tell me INPUT_FIELDS values. Please help me
    Regards,
    Kshitij Rathore

    Hello,
    Please help me for solve this problem. I am trying to solve problem from last 4 days but i didn't get any solution.
    Regards,
    Kshitij Rathore

  • How can I disable the Reason for Rejection field in VA02 line items

    Hi,
      I dont want the users to be able to change the reason for rejection field in the sales order line items. Can someone please suggest a tried and tested way of doing this
    Thanks for reading.

    Set up an auth object for the field.  In userexit field modification check the auth object and set the field to be grayed out if they don't have authority.  Users can then not change the value of the field  Sample code
    IF screen-name = 'VBAP-ABGRU'.
           AUTHORITY-CHECK OBJECT 'Z_BLK_REAS'
                   ID 'ABGRU' DUMMY.
          IF sy-subrc EQ 0.
            screen-input = 1.
          ELSE.
            screen-input = 0.
          ENDIF.
      ENDIF.

  • To set reason for rejection for 3rd party order materials

    Hello,
    I have created the sales order with normal and 3 party materials, with reference to this order i have created the purchase order and delivered normal materials. after some period i am trying to put the reason for rejection code for 3 rd party materials. but the system is showing the error like " subsequent documents already exist for item xyz". then i deleted the purchase requestion and purchase eventhough system is showing the same message while i am trying to put the rejection in the Sales order.
    Could you plz let me know the reason why the system is not accepting to put the reason for rejection in the sales order  after deleting the PR and PO????
    Regards|KS

    Hi,
    Please refer to SAP note 392945,356895 and 403524.
    Thanks and best regards,
    Smile

  • Reason for rejection in Credit Memo

    Hi gurus,
    We have a Credit Memo Request with one position. This position is rejected (Reason for rejection) and document is blocked at head level (Billing block).
    If we unblock Billing block from CR, we can create a bill of 0 price. We want system willn't create bills in this case, because the item level is rejected and a bill of 0 euros is not correct for us.
    Thank you!!

    Hello,
    When you reject the line item in the document the net value become 'Zero',
    But when you reject with a 'reson for rejection' the order will get closed, it should not allow processing the billing again. How many line items you have in this credit memo request?
    Check the status of the credit memo request in VA03 --> Environment --> Status Overview. Check whether the credit memo request is 'completed' or not??
    Prase

Maybe you are looking for

  • How do I best share an iPhoto library to several users on a Lion Server?

    I am considering setting up a Lion Server to use for our family of five. The one thing I struggle to understand from searching for information here, and throughout the Internet is: Can I set up a Lion server to have shared libraries for iTunes and iP

  • MuVo does not show up in "My Comput

    I have an Emachines 2.92 ghz system with 024 ram running Windows XP and I <EM>do</EM> have Adminstrati've rights. I installed the software on my computer as instructed. When I rebooted and then attached the Muvo txfm to my usb port. The Muvo screen s

  • Obtain Array from an XML file with Multiple Arrays

    Hi, So I have been struggling with this program I am making for the last few months but I am almost there. I have a program that creates multiple arrays and place them one after another in an xml file and each array has its own unique name. Now I wou

  • Multiple itunes library folders - help help help...

    hi all, please help. i am trying to put all my music into 1 itunes folder. the problem im having is that i have about 3 at the moment ( 1 main HD,1 ext HD.1 old laptop) they are all on my main HD now , but when i try to move 1 into the other, it says

  • Appears RIM ERROR screen every morning!

    Every morning it appears a screen saying RIM ERROR. I turn of and turn on the iphone and the problem dissapear, but then again appears next morning. I have been with this for 4 consecutive days. Besides, it loses Server conenction during the day and