Reason Rewire with Logic Pro 7.2!

Hey guys,
I had no problem rewiring Reason in 7.1 on my PowerPC Mac Mini, but on my Intel Macs, with 7.2, Rewire is not an option in the Channel List on an Audio Object or Aux. I notice there is still rewire layers in the Env, but I'm confused about the one slave, two slave thing, (A and B). Am I doing something wrong? Or do I need to update Reason from 2.5 to 3.0? Help! Please!

For Rewire to correctly work on Intel Macs, Both apps need to be running under Rosetta. Since Logic is a Universial Binary, there isn't a way to run Reason as a rewire slave from Logic.
You'll have to wait till a Universial Binary of Reason is released.
more info http://www.propellerheads.se/
"Early testing using the Apple Developer Transition Kit shows that:
-Reason will continue to run in Rosetta, but the performance loss is similar to running Reason on a G3.
-ReCycle runs fine in Rosetta, with no measurable performance issues.
-ReWire works, as long as all applications in the session are PowerPC-based."
Dual 1.8Ghz G5 PB G4 1Ghz LP7.1.1 Motu 896 Mac OS X (10.4.5) Reaktor 5.1 Reason 3.0.4 Live 5.0.2 Battery 2.1.1 Recycle 2.1

Similar Messages

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)

hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)
I would like to be able to quickly bounce down my mixes, through the Zed outputs.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

HT5812 Will East West Quantum Leap SILVER work with Logic Pro X ?

I wonder if EWQLSO SILVER edition will work with Logic Pro X. I can't think of any reason that it should NOT but if anyone tested please let me know. The software is quite old..
Thanks

it's worthwhile considering the VSL Special Edition, but check whether anyone else is running it on macbook, my iMac (also 4GB) is very happy with it, and some of the sounds are wonderful.
Best
Steve

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Questions about Novation Remote 25SL integration with Logic Pro 8

Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
- Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
- Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
- I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
Thanks in advance for all your feedback.
Message was edited by: Jason Lixfeld

Follow-up research:
Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
1. disconnect the alphatrack.
2. launch Logic and then turn on the ReMOTE SL.
3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

M-Audio 61ES not playing nicely with Logic Pro X!

The 61ES has been doing some really wacky things: I opened it up out of the box for the first time last night and right off the bat the middle octave of notes on the controller were very quiet compared to the high and low notes on the board. It was like the velocity wasn't working properly on those keys or something. The sounds worked fine in Logic when I pencilled them in. But I was too tired to mess around with it more, so went to bed and figured I'd deal with it in the morning. So this morning, the middle octave of keys seems fine, but the middle G just won't play at all. And many of the notes aren't tracking, or playing- especially during fast passages.
I pulled up Pro Tools 10 and the 61ES worked fine. So something is going on between the controller and Logic. Anyone have any ideas?
I'm running it on a MacBook Pro with 10.8.5. And the latest version of Logic Pro X- 10.0.6. Thanks for any advice!

Try this....
http://www.noterepeat.com/products/m-audio/usb-midi-controllers/axiom-air-series /269-m-audio-axiom-air-series-setup-with-logic-pro-x
Also make sure you have installed the latest drivers for the Air and Logic...
Axiom AIR Mini 32 Hyper Control Logic v1.0.2 (Mac)
Other that that.. Id contact M-Audio support for further help and advice
http://www.m-audio.com/support

Can I connect every USB-Audiointerface with Logic Pro?

Hello there,
please forgive me, if my english isn't so well.
So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface.
But - Can I simply connect a USB-Audiointerface with Logic Pro?
So, hope you understand me,
Best wishes, "toasbrot_55" (sorry for that name, i don't know when I did chosen this name)

All Mac OS compatible audio interfaces work with Logic, and almost all USB interfaces are Mac compatible. So it depends on which interface you have (make and model), and which Mac OS version you use.

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Thunderbolt audio interface with Logic Pro?

Are we to get a new thunderbolt interface with Logic Pro? Avid released their stuff today!

re: Thunderbolt
bill borez wrote:
They'll be a whole load of them in the not too distant future.
hehehehe
http://www.youtube.com/watch?v=kTTSsB92L_s
at about :48

Final cut asks to buy compressor though it's installed with Logic Pro

hello,
how can I tell Final Cut that there is a version of Compressor on my mac? thanks, grts, Lucaz

So, uh, lucaz...a compressor in Logic Pro is for audio signals. Totally differnt animal. Very worthwhile, but not going to collaborrate with Logic Pro in any way that I think you're looking for.

Is Line 6 Key Board Piano good with Logic Pro X?

IS THE LINE 6 PIANO KEY BOARD 49 ANY GOOD WITH LOGIC PRO X?

if it works with Garageband it will work with Logic Pro X as a midi keyboard.
....and please don't shout (Dont use all caps in your questions) .. It makes people type really small and timidly!

Alesis Midi Controller Keyboard setup with Logic Pro 8

Hi, just wondering if anyone can help me... I'm a complete newbie!
Recently bought a Macbook with Logic Pro 8 and would like to get set up for some home recording. The keyboard I want to use as a midi controller is the Alesis QS6 which has been in the wardrobe for some time. I have a Midiman USB midi interface.
When I connect it all up, I can't get it to make any sounds from Logic, only from the keyboard itself, which I don't want. A friend suggested taking out one of the midi cables so now I have only Midi out from the keyboard running into Midi in on the Midiman. When I play the keyboard the notes register on the Transport bar and I can even record them but I cannot hear anything.
Can anyone tell me what settings I need to have on the Alesis? Should the Keyboard Mode be on Normal, CH Solo or Out 1,2,3...16? I read somewhere I need to turn General Midi off, does this sound right? Is it something to do with midi channels - I don't even know how to tell which midi channel is selected in Logic.
If anyone has experience with using the QS6 with Logic I would love to hear from you!!!
Thanks!

Run the Audio/MIDI Setup utility. Is your keyboard/MIDI interface displayed in there?
If not, OSX does not see your MIDI device. Install it's drivers if it has them. If it doesn't have any drivers, your MIDI config might have got hosed. What keyboard is it?
Unplug and replug it, directly, don't use a hub. Does it show up in the AMS utility now? Try powering it for an adapter, not from USB.
If you still get no joy, I'll give you some procedures to try...

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

Reason Rewire with Logic Pro 7.2!

Similar Messages

Maybe you are looking for