Reasons for not supporting JDeveloper 3.1 version

Please mention the details reasoning of why JDeveloper 3.1 version is now no longer supported.
Are there Database querying related problems ?

because it is so old, that it's of interest to archeologists only anymore ;-)
there are 2 generations of jdeveloper, the pre-9i and the 9i. jdev 9i is completely new in comparison to the pre-9i versions. the last pre-9i version was jdev 3.2.3, so you may imagine, why 3.1 is no more supported.
trevi

Similar Messages

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

Problem viewing forms.This form is not supported with the current version of Adobe Reader.Upgrade to the latest version for full support. That does that mean exactly?

Problem viewing forms.This form is not supported with the current version of Adobe Reader.
Upgrade to the latest version for full support.
What exactly do I need to do?

That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

Jeannot7 wrote:
I'm interested in seeing who gets the D7100 support first? Apple or Adobe!! I will go with the one that gets it out first.
FWIW,
Adobe keeps a quarterly release schedule for RAW updates. The current Lightroom 4.4 RC expires on 5/31/2013 which typically is an indication that the official release will be close to that date. According to the current list of new supported cameras, the Nikon D7100 is not slated to be supported (but that could change on release).
http://labs.adobe.com/technologies/lightroom4-4/?tabID=details#tabTop
The most likely time frame for Adobe support of the D7100 will be sometime in August or September 2013 (although there will probably be a Lightroom 4.5 RC available prior to that for testing purposes).

OWS-00102 Reason for not creating a custom Java type: simple or mixed conte

Hi ,
I am generating the java proxies from a WSDL file in Jdeveloper and I am getting the below warning.
WARNING: OWS-00102 Mapped {http://xmlns.fmr.com/systems/dev/aar/requests}ViewRequestStatusResult to javax.xml.soap.SOAPElement ViewRequestStatusResult. Reason for not creating a custom Java type: simple or mixed content is not supported.
I have tried using Jpub as well, but it does not work as well.
I am very new to JAVA and It seems some java code needs to be created. can any one please help me how to resolve this issue.
Thanks and Regards,
Vineet

var cResponse = app.response({
cQuestion: "Enter the section number to appear in the stamp.",
cTitle: "Section Number",
cLabel: "Section Number:"
if (cResponse == null) {
event.value = '*INVALID*";
else
event.value = cResponse;
You can only remove the 'Warning JavaScirpt" is by creating a special application folder script for the 'app.response' method that uses the 'trustedFuncton' to suppress this security warning. Then in you form, you will need to test for this function and either issue a warning about the missing function or run the 'app.response' code and live with the warning. Each system will need the special application folder script installed on it.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Why does Silverlight install process state that my 64-bit Win Vista OS does NOT support the 64-bit version of Silverlight?

As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC.
Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April. One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
about the pending change and how it would be handled. Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
under IE) and on Fri 4/17 shut it down for the weekend. When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!
I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight. I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
file) and got part-way through the install when this error msg popped up: "Unable to Install Silverlight. Your operating system does not support the 64-bit version of Silverlight". WHAT?! Clicking on the "more info"
link led to this msg: "Message ID: 1518. Your operating system does not support the 64-bit version of Silverlight. Click here for the latest version of Silverlight." That link simply led back to the download page which resulted
in receiving another copy of the same executable file.
According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type: 64-bit Operating System". I've been using this same Vista PC since Sep 2008 and running Silverlight for
around the past 5 yrs.
? -- Why doe the Silverlight installer code flag my OS as not supported?
? -- Is there a way to get an older version of Silverlight that will run under Vista?
Thanks in advance for any helpful comments.

Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.
Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed. A phone call to their tech support (predictably)
led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue). The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
Here's something I forgot to mention in my original post: In several of the threads on this subject (some dating back to 2008!), people have
suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
system does not support the 64-bit version of Silverlight"; it doesn't say anything about
what browser you're using.

I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
Any suggestions?

Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
https://wiki.mozilla.org/Firefox/win64

CAD "Select reason for not ready" not appearing for some agents? Please help!

Hi all,
I have some users who when they click on 'Not Ready' in CAD (Cisco Agent Desktop) - they are not presented with the 'Select Reason for Not Ready' dialog box - it just goes straight to Not Ready.
I have searched high and low but have not found any suitable results (maybe I'm doing it all wrong?).
Anyway - we use CUCM
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;
mso-fareast-language:EN-US;}
8.0.2.40000-1 and UCCX
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;
mso-fareast-language:EN-US;}
8.0.2.10000-41.
Version 8.0(2) of CAD.
Works for some agents and not others. All the same Windows operating system.
Is there an individual setting which needs to be set on each user in CUCM or UCCX in order for this to be triggered?
I would've thought it was universal?
Cheers,
Brett

Ahhhh, spot on.
Can't believe I missed it...
Cisco Desktop Administrator (go) > Personnel > Agents > Set appropriate 'Work Flow Group'
Agent logs out of and closes CAD, opens and logs back into CAD, tested, solved.
Many thanks again

Oracle Business Intelligence is not supported on this Windows version

Hi Guys,
I uninstalled OBIEE 10.1.3.4.1 and OBIA 7.9.6.1 and after that i did disk cleanup from Start->Accessories->System Tools-> Disk Cleanup.
And after that when i tried to Install OBIEE 10.1.3.4.1 i got the following error.
Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
But my machine is Windows XP x86 and I have installed OBIEE. I was surprised when i saw this error.
In Run-> CMD when I type Systeminfo i get the following error.
Loading Network Card Information...
ERROR: Provider Load Failure.
I would appreciate if any one of you can let me know what could be the problem.
Thanks a lot!
Edited by: user10511107 on Mar 14, 2010 9:22 PM

Hi Daan,
I belive we all shoud consider http://forums.oracle.com/forums/ann.jspa?annID=939
I get upset to see people on this forum who answer the questions like *'use google'* or *'let me google it for you'* or *'use this forum filter'*
I belive it is better to help them answer a better question or if you don't like the question ignore it.
Hi user10511107,
I belive your problem is with Windows not with BI, BI just can't get windows version,
If you are on right version of windows go to MSDN and search for your error and how to fix it
ERROR: Provider Load Failure.
Regards
Nicolae

Frustrated with HP lame reason for not repairing a keyboard issue

I recently called HP about a keyboard issue, where a the backspace key popped up and became detactched from the keyboard because the small latch broke under normal use. HP asked me to send the notebook back to them for replacement of the entire keyboard. When it got there, the case manager called back to tell me that they would not fix the keyboard because there was evidence of something being spilled on it. Although I don't recall any major spill on the keyboard I didn't deny that coffee drops may have reached the keyboard, nontheless that is not their concern and does not relate in anyway to the problem I resported to them. Yet HP refused to replace the keyboard and sent back as is. I must mention that the machine is functional and the spill has no effect on the operation of the machine. My frustration is with the broken key which affected my use of the keyboard.
In spite of my appeal to the case manager and customer support, they insisted that it's against their policy to fix the keyboard because of the spill evidence on the keyboard.
I am wondering if anyone else had a similar experience with HP service and particulary how they handled my service call. I am not accepting HP's lame reason for not fixing my keyboard and I was not happy I could nothing about it. I however use several HP products in my SOHO environment and this support incident left me with a bad experience.

Hello andanderson,
Sorry to hear about the troubles you have had with your laptop and with support. I am going to forward this to the appropriate team for review. Someone should be in contact with you shortly.
Since this is a forum and we have no contact information for you, just your user id initial communication will be made through the forums private message feature. Please be on the lookout for a private message in regards to this issue.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

"function is not supported by the current version of the backend server"

Hi,
I just updated SAP business one with latest 8.81 patch 10 and related integration component. However, when I try to add a sales order using new 1.5 version of the mobile app, it give the following error:
"Note that this function is not supported by the current version of the backend server".
Any idea what this means? Do I need to update the integration component with a different version?
Thanks

Hi Jose,
please refer to this SAP Note [1602674 - SAP Business One for iPhone and iPad - Troubleshooting Guide|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136303236373426]
Note: you need to use your S-Account to access this note.
regards,
Fidel

What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian

Reasons for not up dating the planned revenue in internal order

Dear   CO experts
What are the probable reasons for not up dating the the planned revenue in internal order . Eg : The order   value in CRM order is not flowing to the planned revenue in   internal order . The GL has been defined for the same in ECC and CRM .
What are the points to be checked if the planned revenue does not update the internal order.
Where can i find the documentation for the settings of CRM    to ECC controlling.
Regards
Raj

Hi,
Check in KOT2_OPA corresponding to your order type whether 'Revenue posting' is flagged.
With regards,
Mrinal

Reason for not allowing static declarations inside an inner class

Is the reason for not allowing static declarations inside an inner class is due to the fact that it can never be accessed at a class level as the outer class has to create an instance of the inner class and any attributes/methods of the inner class has to be accessed through that.
Typically, an instance (non-static) variable can never be accessed in a statement or expression inside a static context but the class variable can be accessed inside a non-static context. Given this, shouldnt the static declarations be allowed inside an inner class?
Correct me if my understanding is wrong.
Thanks

I still couldnt get it clearly. Why i cant i have a static value ( variable ) for all the instances of the inner class irrespective of its enclosing instances of it ( i.e outer class instances). Say in this example below,
class Outer
static int i = 0;
public Inner inner = new Inner();
class Inner // inner class ( non-static nested class )
int j = 0;
static final int k = 2; // compile time constants are allowed
// ininner class
public void m1()
j++;
System.out.println("j is " + j);
i++
System.out.println("i is " + i);
public static void main(String[] arg)
Outer outer1 = new Outer();
outer1.inner.m1(); // j will be 1 & i will be 1
Outer outer2 = new Outer();
outer2.inner.m1() // j will be 1 again & i will be 2. But I would
// want j to be 2. Why is this not allowed?
Looks like something missing..

Reasons for not supporting JDeveloper 3.1 version

Similar Messages

Maybe you are looking for