Reasons for not up dating the planned revenue in internal order

Dear   CO experts
What are the probable reasons for not up dating the the planned revenue in internal order . Eg : The order   value in CRM order is not flowing to the planned revenue in   internal order . The GL has been defined for the same in ECC and CRM .
What are the points to be checked if the planned revenue does not update the internal order.
Where can i find the documentation for the settings of CRM    to ECC controlling.
Regards
Raj

Hi,
Check in KOT2_OPA corresponding to your order type whether 'Revenue posting' is flagged.
With regards,
Mrinal

Similar Messages

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?

Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?

Are you sure you have a 3GS and not a 3G? The 3G cannot be updated to iOS5. What version are you on now?... Settings > General > About > Version

I want to check the status of application No. For it is written in my account was canceled and I did not do so I urgent news about his condition and the reason for canceled I redial the same time as the sender befo

Thank you for your attention
I want to check the status of application No. W439602096
For it is written in my account was canceled and I did not do so
I urgent news about his condition and the reason for canceled
I redial the same time as the sender before you
We are waiting for you

This is a user to user forum. You are not talking to Apple here. We cannot help you; you will need to contact wherever the order was placed.

CAD "Select reason for not ready" not appearing for some agents? Please help!

Hi all,
I have some users who when they click on 'Not Ready' in CAD (Cisco Agent Desktop) - they are not presented with the 'Select Reason for Not Ready' dialog box - it just goes straight to Not Ready.
I have searched high and low but have not found any suitable results (maybe I'm doing it all wrong?).
Anyway - we use CUCM
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;
mso-fareast-language:EN-US;}
8.0.2.40000-1 and UCCX
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;
mso-fareast-language:EN-US;}
8.0.2.10000-41.
Version 8.0(2) of CAD.
Works for some agents and not others. All the same Windows operating system.
Is there an individual setting which needs to be set on each user in CUCM or UCCX in order for this to be triggered?
I would've thought it was universal?
Cheers,
Brett

Ahhhh, spot on.
Can't believe I missed it...
Cisco Desktop Administrator (go) > Personnel > Agents > Set appropriate 'Work Flow Group'
Agent logs out of and closes CAD, opens and logs back into CAD, tested, solved.
Many thanks again

Variables from workbook are not visible in the Planning function

Hi,
We're using a workbook with a bunch of queries in it. Every query has a lot of variables declared that are calculated based on two input ready variable that users are required to fill the first time.
Everything works as expected until the save data function is called, which in turn calls the planning function.
Here, the user exit variable try to be recalculated again. Unfortunately, this planning function loses track of the two input ready variables that were on the workbook, so the user exit variables have no values.
Can you please suggest a method so that:
a) The user exit processing in the planning function "sees" the two input ready variables
b) The user exit processing is not triggered in the planning function and it's taking the already calculated values
Let me know if you require further information.
Best regards,
George

Hi,
the variables in the filter of the query lives in one variable container and the variables of the filter of the planning sequence live in another variable container. They do not know each other. You need to establish a relationship between them. Usually this is done via variable binding for regular variables. For exit variables the variable binding can be done as written above.
If as in your case you have variables in the filter of the query and you want to use their values in the variable of the planning sequence than you need to store the values somewhere where you can retrieve them in the exit. This can be in a e.g. in shared memory or in the session memory. To do this you need to spend an extra exit variable in the filter of the query. The exit variable reads the real values and stores it somewhere (e.g. shared memory, global parameter of a function group, a class member or something similar). Now as the variable value is stored it can be read in the implemenation of the exit variable in the filter of the planning sequence.
In total we have 3 variables:
Variable 1 contains the value which the user keys in and exists in the filter of the query.
Variable 2 reads variable 1 and stores the value. It needs to be defined in the filter of the query as well.
Variable 3 reads the stored value and needs to be defined in the filter of the planning sequence.
Regards Matthias Nutt
SAP Consulting Switzerland

OWS-00102 Reason for not creating a custom Java type: simple or mixed conte

Hi ,
I am generating the java proxies from a WSDL file in Jdeveloper and I am getting the below warning.
WARNING: OWS-00102 Mapped {http://xmlns.fmr.com/systems/dev/aar/requests}ViewRequestStatusResult to javax.xml.soap.SOAPElement ViewRequestStatusResult. Reason for not creating a custom Java type: simple or mixed content is not supported.
I have tried using Jpub as well, but it does not work as well.
I am very new to JAVA and It seems some java code needs to be created. can any one please help me how to resolve this issue.
Thanks and Regards,
Vineet

var cResponse = app.response({
cQuestion: "Enter the section number to appear in the stamp.",
cTitle: "Section Number",
cLabel: "Section Number:"
if (cResponse == null) {
event.value = '*INVALID*";
else
event.value = cResponse;
You can only remove the 'Warning JavaScirpt" is by creating a special application folder script for the 'app.response' method that uses the 'trustedFuncton' to suppress this security warning. Then in you form, you will need to test for this function and either issue a warning about the missing function or run the 'app.response' code and live with the warning. Each system will need the special application folder script installed on it.

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Days supply is not populating in the planning book

Hi Experts,
When I select multiple products in the planning book, the value is papulating as total but if I drilled down to individual product then days supply(Key figure) values are not populating in the planning book.
Please let me know if any idea.
Regards,
Hrishi

From what you mention it looks like you do not use the standard SNP Planning Book. Was the macro inactive so that you had to regenerate?
When you move a macro from workbench to level change it should not require to be regerated.
Please check if following macros are active (green) under level change in sequence
Determine Workdays
Layout Attributes
Drill (Level)
Else compare the macros and sequence in the standard SNP Planning Book with the Planning Book you are using.
The Day's Supply (All: Day's Supply) and Determine workdays macros are essential for populating the day's supply keyfigure.
Thanks,
Somnath

Reasons for not enabling radio on some Lumia modle...

Do anyone know actual reason behind not enabling Radio on some of the Lumia models (I am using 620)
It is great if I can have radio on my phone. But with Amber update it is not happening..
As I heard from other sources in 620 radio antenna is not connected to the head phone but otherwise phone is fully support for the radio. Is it true?
If so this may be one of a silly mistake by Nokia and Microsoft.

Hi Guys,
What I am telling is no recalling of products, what I am telling is proper planing ....
As we know 620 has a partial hardware support for FM radio, to enable FM radio fully will it take anouther reasonable cost (not now in the designed time)? Do you think so, I don't think so
Also it may be still posible to charge additional cost from customers and do hardware link for customers who really want it. I am not sure.
The 620 was designed and released before the 520 and 720.
Yes agree but when designing they should know that that can support FM radio in the future. I guess 920 desinged pararally to the 620 and 920 has FM radio.
So what basically I want to emphasize is the planing of future products. I think Nokia/MS shoud do this carefully in the future.
Regards,
-Lasith

Frustrated with HP lame reason for not repairing a keyboard issue

I recently called HP about a keyboard issue, where a the backspace key popped up and became detactched from the keyboard because the small latch broke under normal use. HP asked me to send the notebook back to them for replacement of the entire keyboard. When it got there, the case manager called back to tell me that they would not fix the keyboard because there was evidence of something being spilled on it. Although I don't recall any major spill on the keyboard I didn't deny that coffee drops may have reached the keyboard, nontheless that is not their concern and does not relate in anyway to the problem I resported to them. Yet HP refused to replace the keyboard and sent back as is. I must mention that the machine is functional and the spill has no effect on the operation of the machine. My frustration is with the broken key which affected my use of the keyboard.
In spite of my appeal to the case manager and customer support, they insisted that it's against their policy to fix the keyboard because of the spill evidence on the keyboard.
I am wondering if anyone else had a similar experience with HP service and particulary how they handled my service call. I am not accepting HP's lame reason for not fixing my keyboard and I was not happy I could nothing about it. I however use several HP products in my SOHO environment and this support incident left me with a bad experience.

Hello andanderson,
Sorry to hear about the troubles you have had with your laptop and with support. I am going to forward this to the appropriate team for review. Someone should be in contact with you shortly.
Since this is a forum and we have no contact information for you, just your user id initial communication will be made through the forums private message feature. Please be on the lookout for a private message in regards to this issue.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Reason for not allowing static declarations inside an inner class

Is the reason for not allowing static declarations inside an inner class is due to the fact that it can never be accessed at a class level as the outer class has to create an instance of the inner class and any attributes/methods of the inner class has to be accessed through that.
Typically, an instance (non-static) variable can never be accessed in a statement or expression inside a static context but the class variable can be accessed inside a non-static context. Given this, shouldnt the static declarations be allowed inside an inner class?
Correct me if my understanding is wrong.
Thanks

I still couldnt get it clearly. Why i cant i have a static value ( variable ) for all the instances of the inner class irrespective of its enclosing instances of it ( i.e outer class instances). Say in this example below,
class Outer
static int i = 0;
public Inner inner = new Inner();
class Inner // inner class ( non-static nested class )
int j = 0;
static final int k = 2; // compile time constants are allowed
// ininner class
public void m1()
j++;
System.out.println("j is " + j);
i++
System.out.println("i is " + i);
public static void main(String[] arg)
Outer outer1 = new Outer();
outer1.inner.m1(); // j will be 1 & i will be 1
Outer outer2 = new Outer();
outer2.inner.m1() // j will be 1 again & i will be 2. But I would
// want j to be 2. Why is this not allowed?
Looks like something missing..

Restriction of Selecting Reason for movement based on the movement type

HI,
Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
Example:
Defined the Reason for movements 0001 & 0002 for the movement type 561.
Defined the Reason for movements 0003 & 0004 for the movement type 563.
During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
it needs to be controlled w.r.to the movement type.
that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
Is it possible to control, the selection of "reason for movement" based on the movement type ?
thanks in advance for your help.

Hi Sundar,
Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
Hope this help.
Regards
Ankush

Can we create a Budget & Availability Control for revenues with internal orders?

Dear SAP Gurus,
I have created an expense budget with the help of an internal order and have assigned the same to an expense GL (cost element). I have done all the necessary system settings and the system gives an error message when the F-02 document posting exceeds the budget.
My query is, I want to replicate the the above for revenue postings. I have done the same system settings for revenue posting however the system does not give an error when the budget amount is exceeded.
Can I please get some assistance with this requirement?
Best Regards,
Akshay

Hi Akshay,
System will not give the error in the case of Revenue GL. Because all the revenue GL will be hit for credit. It means it will update negative against the budget available. It means
Current Budget-(-Revenue Budget)= Current Budget + Revenue Budget= Available Budget
Because of this system will never give the error.
Regards,
Ankit Agarwal

How to post the revenue to internal order

Hi guyes:
Please can anyone tell me how to post the revenue to internal order when i invoicing using VF01.
i have already tested,i enter the internal order in the TAB 'Account assinment' when VA01.
but i seem to post the sales cost to the internal order but not revenue.
Can anyone tell me how to resolve it?
Thank you!

Hi,
You seem to be doing the right thing. Once you have posted the billing document. Can you please go to vf02 and check in the item detail tab if the internal order you have entered in va02 is there.
Thanks
Rachelle

Reasons for not up dating the planned revenue in internal order

Similar Messages

Maybe you are looking for