Reasons why can't move image on its separate layer or combined?

I am using Creative Suite 5.5 on my MacBook Pro...and today had issues demonstrating the simple process of dragging one person/image onto another, applying a quick mask to do some simple morphing.
But...one, I couldn't drag the image from the internet and drop onto the project, but had to go to Edit and copy, then create a new file and hit paste. Placing one image side by side to another...I was not able to drag the image of one person to drop onto the other. I either had to use the marquee tool, drag around the image, copy and paste or...found I could drag the image from its layer in the layer's palette and drop onto the project.
More frustrating was that once I had both images in the same project, I was not able to move the new person/image added to locate in right position over the background person/image. I would drag it to that new location, and it would snap back to the original location. Obviously the need to take any image added and move it around to orchestrate your image is important.
I have asked a number of artist friends, checked the mode (both images are RGB) and both images at 8 bits...
I presume it is a simple command that will release the image to stay where located using the Move tool...but am not familiar enough with Suite 5.5 obviously. If you can help, will GREATLY appreciate it...thank you

Hi there
You posted your help request to the forum for photoshop.com, and online portal site (not a forum for Photoshop CS). I'll move this for you.

Similar Messages

Why can I import images from my scanner in Adobe Elements 11 organizer but not in photo editor?

Why can I import images from my scanner in Adobe Elements 11 in the organizer but not in the photo editor? I have Windows 8 64 bit.

You need to install TWAIN to scan into the editor:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html

HT204053 why can my phone boot up,its always asking me to connect to itunes

why can my phone boot up,its always asking me to connect to itunes

In that case, you're going to have to put the phone into recovery mode and restore it as a new device. The only other option is to connect it to the PC it normally syncs with and restore it, but it sounds like that's not a possibility.

Can't MOVE images from one project to another: must not understand

Greetings,
I have two questions as a result of aperture not working the way that I have read on forums etc. and am wondering what i am doing wrong
1) How do I MOVE images from project to project without duplicating masters or versions
2) how do I delete versions
All of my files are referenced.
*1) moving from project to project*
I have a blue folder called "NEFs." In it, I have a default project where I just dump all of my images called "00 dump." After I dump them, I organize into other projects. So, I do the following:
• I create a new project called "2008 Thanksgiving" inside the NEFs blue folder making it a sibling to "00 dump"
• I go back to "00 dump" select all the images that were shot over thanksgiving, and drag to the "2008 thanksgiving" folder. The images transfer fine, but when I go back to "00 dump" I see that the images have NOT actually moved, they are now sitting in both projects. How can this be? I thought that if I move images from project to project then I am actually moving the master, not replicating a version? That leads me to my next dilemma
*2) how do I delete versions?*
Now that I have replicated photos in my "2008 Thanksgiving" project, I want to delete them since I see them still sitting in "00 dump." I do the following:
• select the "2008 Thanksgiving" project
• select a number of images
• press command + delete (this is the only way to delete a file as far as I can tell
• popup comes up explaining that if I delete this file it will delete the master too and the reference file. So, that's exactly what it does.
Deleting the referenced file is fine for many junk images, but in this case, I just want to delete the copied version that seems to be in two projects now. Any help would be greatly appreciated. I would really love a full understanding of how this structure works.
-i

When you drag images and the drop target is an actual little yellow project box (not a folder, and album or anything else) the images move from one project to another, if your drop target is not the actual project but something else within another project all you do is cause the version to show up there, nothing is duplicated.
To delete a version or versions selected just use command-delete. This gets rid of the actual version not just removes it from the current album view. If it happens to be the last version of that master it will get rid of the master as well.
Have a look at this:
[Aperture 2 Organization|http://photo.rwboyer.com/2008/07/apple-aperture-21-organization>
RB

Can't move image files within Bridge

I recently bought an iMac and got the CS5 license transferred over to the Mac platform. Got CS5 loaded and everything works except for one critical thing: I can no longer move image files within Bridge. When I do the right click on an image file to select that command, the command is "grey" and won't let me to choose it. So I am forced to rearrange my image files through the Mac's Finder/Pictures feature. Drag and drop doesn't work either. I have looked everywhere for a setting that would allow movement of files to different folders and rearrangement within Bridge, and can't find one. I have Bridge set as my default for photos and not the lame iPhoto program on Macs. I previously was to be able to freely use Bridge for organizing my photos on a PC and now sorely disappointed that I can't do this with my new iMac.

I previously was to be able to freely use Bridge for organizing my photos on a PC and now sorely disappointed that I can't do this with my new iMac.
No need for disappointment because you can move all files freely within Bridge.
First check if you have read and write permissions for your files/folders/disk (try move the files using finder) If Finder allows you to drag the files to the location you previously wanted in Bridge then the problem lies in Bridge.
First select a file and with right mouse click menu choose purge cache for selection. If the problem is gone you could do so for the whole folder using menu tools/cache/purge cache for folder while having Bridge pointed to that folder.
If not restart bridge holding down option key and choose reset preferences.
could you report back?

Can I move images from iView Media Pro into Aperture?

Can I import images previously catalogued in iView Media into Aperture?

Aperture can import:
File Formats
Native RAW import and editing of images from leading digital cameras and camera backs
(See RAW support page for model listing.)
.ARW, .CR2, .CRW, .MOS, .NEF, .RAF, .RAW, .SRW, .TIF, .OLY, .FFF, .3FR, .DNG1
Compatible with all major still image formats
JPEG, GIF, TIFF, PNG, PDF, PSD2

Can't move images in Survey mode

I click on a folder and pull up a few images in Survey and am not able to move/re-arrange said images, on other folders it works as it should -- Sometimes it works sometimes it doesn't -- yes, I click on the image itself. Is this a bug?

Did you ever figure this out?
I have the same issue... can't figure out why...

Can`t move image in pse 11 for correction

I made a lot of photos during trip, all loaded on Mac. Same I need correction in Adobe Photoshop element 11( already in computer) and several can`t loaded in Adobe 11. When I click to open in Adobe 11 Pop up note "Could not complete your request because an unknown or invalid JPEG marker type is found." The image 3456 x 5184 9,1MB JPEG, ISO 400, 32mm, F13/500.
Other similar images open in Adobe11 without problem. I tried to use Adobe 10 but the result was same.
What going on? and how fix It?
Thanks, Rafael

Dear,
Thanks for direction, but it not working.
After revived all recommendation I tried to:
1 Open the image in iPhoto
2 Click Export on the file and move the photo to MY PHOTO
3 Open image in PSE11
IT IS WORKING!!!!
But I still in dark what is happened: way majority of images open in PSE and same didn`t
What is problem: COMPUTER or PSE? and how PREVENT same trouble?
Sincerely, Rafael

Why can't iMovie '11 keep its place when changing

Is there some reason the app can't keep your project clips positioned so that the playhead remains visible in the project browser when you change the time scale or icon size? One can get back by pressing the spacebar to put the picture in motion, but why does the current position usually depart from the visible portion of the project? --AEF
iMovie v9.0.4 20" iMac OS X 10.6.8

The only thing I know of that can keep the playhead in one spot is to hold down the <CTRL> key, then reset the time scale slider. I don't know if it will keep the playhead visible in the Project Window when you change the scale or not. But it will keep the playhead from moving around on you.
I just checked to see if it can keep the playhead within the borders of the Project Window and it doesn't. So you have to keep moving the scroll-bar up and down until you can find the playhead again. But at least with <CTRL> key you can keep it solidly planted in one spot.

I can not move "Image Tricks Light" app to trash. How do I delete it.

I need to delete the app Image Tricks Light, because a window keeps popping up (when I try to open certain other files)
saying the file is damaged and I need to delete it and reinstall it, but it will not move to my trash. What can I do?

Check to see if the app has it's own uninstall utility, you will need to check with the developer. If it does not then try AppCleaner and see if that helps.

Why can't my image be displayed?

Anybody could help me with the code? the image does not seem to appear when i run it...is it because JPanel cannot work with Canvas? or is it because of the error in getImage() method?
This are the code for the ImageClient
import java.awt.*;
import java.awt.image.*;
import java.awt.event.*;
import java.net.*;
import java.io.*;
import java.util.Vector;
import javax.swing.*;
public class ImageClient extends JFrame implements ActionListener
     private JMenuBar mainMenu;
     private JMenuItem open, save, exit, scale;
     private JMenu fileMenu, editMenu;
     private JPanel mainPane;
     private JFileChooser imagesFile;
     private JLabel imageLabel, imgPanel;
     String fname;
     // Declare all the Input/Output object variables.
     Socket toHost = null;
     PrintWriter out = null;
    ObjectInputStream in = null;
     ObjectOutputStream objectOut = null;
     // Declare the user interface object variables.
     // images is a Vector used to store the image names as strings. This simply
     // stores the Vector of file names transmitted by the server.
     Vector images;
     // params is vector used to store the parameters such as image name and operation
     Vector params;
     // img is the image that will be displayed. This simply stores the Image
     // transmitted by the server.
     Image img = null;
     // canvas is a subclass of the awt abstract Canvas class. This is where the
     // Image will be displayed (see bottom of file for MyCanvas class definition).
     MyCanvas canvas = null;
     public ImageClient(String host, int port){
          initGUI();
          initSocket(host, port);
     protected void initGUI()
          Container cpane = getContentPane();
          canvas = new MyCanvas(null);
          //Open the menu in order to img from any folder
          imagesFile = new JFileChooser();
          imagesFile.addActionListener(this);
          //create an JPanel Container
          mainPane = new JPanel();
          mainPane.setBackground(Color.white);
          //create an intermedia panel to hold panel and button
          mainMenu = new JMenuBar();
          setJMenuBar(mainMenu);
          setContentPane(mainPane);
          fileMenu = new JMenu("File");
          mainMenu.add(fileMenu);
          editMenu = new JMenu("Features");
          mainMenu.add(editMenu);
          //JMenuItem(open, save, exit) to be added into the JMenu(fileMenu)
          open = new JMenuItem("Open...");
          save = new JMenuItem("Save...");
          exit = new JMenuItem("Exit...");
          scale = new JMenuItem("Scale");
          imgPanel = new JLabel();
          JPanel images = new JPanel(new BorderLayout());
          imageLabel = new JLabel();
          images.add(imageLabel);
          fileMenu.add(open);
          fileMenu.add(save);
          fileMenu.add(exit);
          editMenu.add(scale);
          //add events to the JMenuItem(open, save, exit)
          open.addActionListener(this);
          save.addActionListener(this);
          exit.addActionListener(this);
          scale.addActionListener(this);
          mainPane.add(imgPanel, BorderLayout.CENTER);
          imgPanel.add(canvas, BorderLayout.NORTH);
          //to set the close menu on the menubar
          setDefaultCloseOperation(DISPOSE_ON_CLOSE);
          //to set the size of the frame
          setSize(500,500);
          //to set the main pane visible to the user
          setVisible(true);
     protected void initSocket(String host, int port)
          try
                toHost = new Socket(host, port);                                        // 1
                out = new PrintWriter(toHost.getOutputStream(), true);               // 2
                in = new ObjectInputStream(toHost.getInputStream());
                objectOut = new ObjectOutputStream(toHost.getOutputStream());   // 3
         catch (UnknownHostException e)
              System.err.println("Unknown host in initSocket()");
             catch (IOException e)
                 System.err.println("IO error in initSocket()");
     public void actionPerformed(ActionEvent e)
          if(e.getSource()==(open))
               imagesFile.showOpenDialog(this); //to have the OPEN dialog box
          if(e.getSource() == imagesFile)
               //to get the file from the exact folder that the user clicks on
               fname = imagesFile.getSelectedFile().getAbsolutePath();
               getImage();
     private void getImage()
          try
               //params = new Vector();
               //objectOut.writeObject(params);
               //objectOut.flush();
                                                                                                    // 1
               int w = ((Integer)in.readObject()).intValue();                              // 2
               int h = ((Integer)in.readObject()).intValue();
               int[] buffer = (int[])in.readObject();
               MemoryImageSource ms = new MemoryImageSource(w, h, buffer, 0, w);      // 3
               Image image = createImage(ms);                                                                                               // 4
               canvas.setImage(image);                                                                                                                   // 5
               canvas.repaint();                                                                                                                                  // 6
          catch (Exception e)
               e.printStackTrace();
               System.err.println("out error: " + e);
     public static void main (String[]args)
          if(args.length != 2)// checks whether enter 2 data e.g. localhost 222222
               System.err.println("Required parameters: <hostname>, <port number>");
               System.exit(0);
          String host = args[0];
          int port = Integer.parseInt(args[1]);
          ImageClient is = new ImageClient(host, port);
class MyCanvas extends Canvas
     // The Image to be displayed.
     Image img = null;
     public MyCanvas(Image i)
          this.resize(200, 200);
     public void setImage(Image i)
          img = scaleImage(i);
protected Image scaleImage(Image i)
     if(i == null) return null;                                                                                                              // 1
     Image scaled = null;                                                                                                                             // 2
     int w = i.getWidth(this);                                                                                                                   // 3
     int h = i.getHeight(this);
     if(w > getWidth())                                                                                                                              // 4
          scaled = i.getScaledInstance(getWidth(), -1, Image.SCALE_DEFAULT);
     else if (h > getHeight())
          scaled = i.getScaledInstance(-1, getHeight(), Image.SCALE_DEFAULT);
     else
          scaled = i;
     return scaled;                                                                                                                                            // 5
     public void paint(Graphics g)
          if(img != null)
               g.drawImage(img, 0, 0, this);
This are the code for the ImageServer
import java.awt.*;
import java.awt.image.*;
import java.awt.event.*;
import javax.swing.*;
import java.net.*;
import java.io.*;
import java.util.*;
public class ImageServer
     // Declare the Vector and Image variables.
     Vector images = new Vector();
     Image img = null;
     public ImageServer()
          initImages();
          try
               start();
          catch (IOException ioe)
               System.err.println("Start failed:" + ioe);
     private void start() throws IOException
          ServerSocket ss = new ServerSocket(22222);
          while(true)
               new ImageServerConnection(ss.accept(), images).start();
     protected void initImages()
          images.addElement("robo.gif");
          images.addElement("phantom.jpg");
          images.addElement("koyomi.jpg");
     public static void main(String[] args)
          ImageServer is = new ImageServer();
class ImageServerConnection extends Thread
     // Declare the Input/Output object variables.
     Socket clientSocket = null;
     ObjectOutputStream objectOut = null;
     ObjectInputStream inObject = null;
     BufferedReader in = null;
     // Declare the data variables.
     Vector images = null;
     Image img = null;
     public ImageServerConnection(Socket client, Vector images)
          clientSocket = client;
          this.images = images;
     public void run()
          try
               newSocket();
          catch (IOException ioe)
               System.err.println("Socket failed:" + ioe);
     private void newSocket() throws IOException
          // in = new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));      // 1
          objectOut = new ObjectOutputStream(clientSocket.getOutputStream());                         // 2
        inObject = new ObjectInputStream(clientSocket.getInputStream());
          sendObject(images);
          Object input = null;
         /*                                                                                                         // 3
          String inputline;
          while ((inputline = in.readLine()) != null) {                                                  // 4
               if (images.contains(inputline))
                    sendImage(inputline);
               else break;
          try
               while((input = inObject.readObject())!= null)
                    Vector invert=(Vector)input;
                    sendImage(invert.elementAt(0).toString(), invert.elementAt(1).toString());
          catch (Exception e){}
          clientSocket.close();
     protected void sendObject(Object obj)
          try
               objectOut.writeObject(obj);
               objectOut.flush();
          catch (IOException e)
                 System.err.println("send failed.");
                 System.exit(1);
     protected void sendImage(String img_name, String inputlineOp)
          int w, h;
          img = Toolkit.getDefaultToolkit().getImage(img_name);                                        // 1
          while ((w = img.getWidth(null)) == -1){}                                                       // 2
          while ((h = img.getHeight(null)) == -1){}
          //OpSelector selector = new OpSelector();
          //img = selector.doOp(inputlineOp,img);// doOp: do the operation
          int[] buffer = new int[w * h];                                                                       // 3
          PixelGrabber px = new PixelGrabber(img, 0, 0, w, h, buffer, 0, w);     // 4
          try
               px.grabPixels();                                                                                 // 5
          } catch (InterruptedException ie)
               System.err.println("Pixel grab failed.");
          sendObject(new Integer(w));                                                                           // 6
          sendObject(new Integer(h));
          // buffer contains all the bytes for the image
          sendObject(buffer);

I dun know exactly which part goes
wrong...sorry...cause there are no errors when i
compile...but the image just won't appear...It isn't the menu bar. And it isn't the file chooser. Can't you write a test program that does
nothing but display an image?

How can we move images ??

I created program where i used images.Can i have any chance that images can be moved from one end of screen to the other end of screen??

Yup.
[http://catb.org/~esr/faqs/smart-questions.html]
[http://mindprod.com/jgloss/sscce.html]
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
db

How can I move image in a div box on hover?

I have an image 50 x 1000 (tall/thin)
The div is 50 x 500
Now what I need is for the top half of the image to show only when the div is displayed normally, The rest of the image needs to be concealed.
But when I hover over the said div I need the image to slide up to show the bottom half within the same div.
I have toyed with clipping and absolute positioning but no joy
Thanks in advance ofr any feedback.
Terry

I actually updated the code in my post to make the ids into reusable classes, just in case you wanted more than one image, but it looks like you grabbed it before I made the change. Use that newer code with classes and add a wrapper element to contain the now floated <div> slide-containers (the bold parts below)...
<!doctype html>
<html lang="en-us">
<head>
<meta charset="utf-8">
<title>Image slides in on hover</title>
<style>
#wrapper {
    width:150px;
    margin:0 auto;
.slide-container {
    position: relative;
    height: 500px;
    float:left;
    width: 50px;
    overflow: hidden;
.sliding-image {
    position: absolute;
    bottom: -500px;
    -webkit-transition: bottom 500ms; /* half a second to transition, might want to up that to 1s-2s */
    transition: bottom 500ms;
.sliding-image:hover {
    bottom: 0px;
</style>
</head>
<body>
<div id="wrapper">
<div class="slide-container"> <img class="sliding-image" src="your-image1.jpg"> </div>
<div class="slide-container"> <img class="sliding-image" src="your-image2.jpg"> </div>
<div class="slide-container"> <img class="sliding-image" src="your-image3.jpg"> </div>
</div>
</body>
</html>

Why can I load Image from jar?

hi,all:
I've packed all gif images into a jar file,it works well on jdk1.4.2_05 with this command:
java -jar pos.jar
but failed on other jdk versions lower than jdk1.4.2_05.
here is the package structure:
├─resource
│ ├─configfile
│ └─images
here is the code getting url:
package resource
public class ResourceLoader {
public ResourceLoader() {
public URL getResource(String fileName){
URL url=ResourceLoader.class.getResource(fileName);
if(null==url){
throw new NullPointerException(fileName+" not found");
return url;
with this url, I will use
toolkit.getImage(url);
to load the image.
exception on 1.4.1_01:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6D2835EB
Function=JNI_OnLoad+0x249
Library=C:\j2sdk1.4.1_01\jre\bin\jpeg.dll
Current Java thread:
at sun.awt.image.JPEGImageDecoder.readImage(Native Method)
at sun.awt.image.JPEGImageDecoder.produceImage(JPEGImageDecoder.java:144
at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.j
ava:257)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:168)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)
Dynamic libraries:
0x00400000 - 0x00406000 C:\j2sdk1.4.1_01\bin\java.exe
0x77F80000 - 0x77FFA000 C:\WINNT\system32\ntdll.dll
0x77D90000 - 0x77DEB000 C:\WINNT\system32\ADVAPI32.dll
0x77E60000 - 0x77F32000 C:\WINNT\system32\KERNEL32.dll
0x786F0000 - 0x7875E000 C:\WINNT\system32\RPCRT4.dll
0x78000000 - 0x78046000 C:\WINNT\system32\MSVCRT.dll
0x6D330000 - 0x6D45A000 C:\j2sdk1.4.1_01\jre\bin\client\jvm.dll
0x77DF0000 - 0x77E4F000 C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F79000 C:\WINNT\system32\GDI32.dll
0x77530000 - 0x77560000 C:\WINNT\system32\WINMM.dll
0x75E00000 - 0x75E1A000 C:\WINNT\system32\IMM32.DLL
0x6C330000 - 0x6C338000 C:\WINNT\system32\LPK.DLL
0x65D20000 - 0x65D74000 C:\WINNT\system32\USP10.dll
0x6D1D0000 - 0x6D1D7000 C:\j2sdk1.4.1_01\jre\bin\hpi.dll
0x6D300000 - 0x6D30D000 C:\j2sdk1.4.1_01\jre\bin\verify.dll
0x6D210000 - 0x6D229000 C:\j2sdk1.4.1_01\jre\bin\java.dll
0x6D320000 - 0x6D32D000 C:\j2sdk1.4.1_01\jre\bin\zip.dll
0x6D000000 - 0x6D0FB000 C:\j2sdk1.4.1_01\jre\bin\awt.dll
0x777C0000 - 0x777DE000 C:\WINNT\system32\WINSPOOL.DRV
0x75010000 - 0x75020000 C:\WINNT\system32\MPR.dll
0x77A30000 - 0x77B1C000 C:\WINNT\system32\ole32.dll
0x6D180000 - 0x6D1D0000 C:\j2sdk1.4.1_01\jre\bin\fontmanager.dll
0x51000000 - 0x51044000 C:\WINNT\system32\ddraw.dll
0x72800000 - 0x72806000 C:\WINNT\system32\DCIMAN32.dll
0x72CF0000 - 0x72D63000 C:\WINNT\system32\D3DIM.DLL
0x6DD30000 - 0x6DD36000 C:\WINNT\system32\INDICDLL.dll
0x53000000 - 0x53007000 C:\PROGRA~1\3721\helper.dll
0x70BD0000 - 0x70C34000 C:\WINNT\system32\SHLWAPI.dll
0x37210000 - 0x3723E000 C:\WINNT\DOWNLO~1\CnsMin.dll
0x777E0000 - 0x777E7000 C:\WINNT\system32\VERSION.dll
0x75950000 - 0x75956000 C:\WINNT\system32\LZ32.DLL
0x12F10000 - 0x12F25000 D:\JBuilder7\lib\ext\jbWheel.dll
0x6D280000 - 0x6D29E000 C:\j2sdk1.4.1_01\jre\bin\jpeg.dll
0x77900000 - 0x77923000 C:\WINNT\system32\imagehlp.dll
0x72960000 - 0x7298D000 C:\WINNT\system32\DBGHELP.dll
0x687E0000 - 0x687EB000 C:\WINNT\system32\PSAPI.DLL
Local Time = Fri Jul 16 10:06:45 2004
Elapsed Time = 2
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_01-b01 mixed mode)
# An error report file has been saved as hs_err_pid2320.log.
# Please refer to the file for further information.

help!!!!

Can I move images edited with the trial version to the version from the Mac App Store?

I have been using the trial version of Aperture to determine if I like it. I am now ready to buy Aperture from the Mac App Store. Will my edited images be moved over to the licensed version automatically or what do I need to do to not loose my edits?
Thanks for your help.
Bob

You will be able to open the trial library in the purchased application even if it doesn't happen automatically.
DLS

Reasons why can't move image on its separate layer or combined?

Similar Messages

Maybe you are looking for