Rebate Agreement Replication CRM to R3 and vice-versa

Hi All,
We have a requirement of creating Rebate Agreement and maintaining the conditions in the same.
When we create an order (in R3 or CRM) the values has to be populated from the rebate agreement.
Scenario A:
The setup of rebate is completed in R3, we have downloaded the conditions from R3 to CRM and when we are creating the order in CRM the rebates are not getting recognized. Upon analysis we found that we have to download the rebate agreements too and the respective object is REBATE_DNL_AGR.
(Rebates are working fine for Pricing in R3.)
Scenario B:
We have tried an workaround of creating rebate agreements in CRM and uploading them to R3, object used is REBATE_AGRMNTS but no success.
(In this case rebates are working fine for Pricing in CRM.)
We are facing issues in replicating the Rebate agreements from CRM to R3 and vice versa.
When we do the initial load R3AS of below objects, they are not progressing and not appearing in queues too. Status is always running
CRM to R3 for rebate agreement – REBATE_AGRMNTS
R3 to CRM for rebate agreement - REBATE_DNL_AGR
If you have any inputs, pls share. Thanks
Regards,
MK

Hi Kalyan,
Did you achieve scenario B ?. You also mentioned that for scenario B , it works fine with pricing in CRM. Was the billing happening in CRM or ECC in that case ?.
Did the scenario A worked ?.

Similar Messages

Replication of Custom Fields from CRM to ISU and Vice versa

Hi Experts,
We are working on adding Z fields on BP level. For this how does the replication of the values takes place from CRM to ISU or vice versa. What are the middleware enhancement we need to do in CRM side or in the ISU side. We would add the fields on web UI crm side by AET but at ISU side how we need to do that and how would the field values replicate in both the system.
A approach for adding BP custom fields in CRM and its interaction with ISU and vice versa would be appriciated.
Thanks,
Mayur

Excuse, you may enter more in detail?
I have created a custom field on BP using the AET would now like to replicate this custom field in BP also in ISU.
I can do all this using the EEWB, but I would avoid it, since, in ISU we already have custom fields on BP, I just can not link them with CRM.

Mapping Z-fields of BP in CRM to ECC and vice versa

Hi Gurus,
Z-fields for BP were created in CRM using EEWB and AET tool. These z-fields need to be transferred from CRM to ECC, standard fields like KNB1-ALTKN, KNKK-REVDB,KNKA-KLIME... etc.
Now, that these z-fields are added in the BDoc. I believe no enhancement is required on CRM.
Please guide me on how to map these z-fields from CRM to standard feilds of ECC.
Thanks & Regards
Praveen
Edited by: Praveen on Apr 19, 2010 10:19 AM

Hi,
Thats right! C03 best practices would be certainly helpful to you.
Few important steps for BP repllication from CRM to ECC would be
In CRM , First define your Logical destination in BD54 .
1) SU01 Transaction to create users : create user in CRM & R/3
2) Transaction code SM59 : Create RFC DESTINATION .. here u use the users created for reaching into R/3 from CRM
3) transaction code: SMOEAC: ADMINISTRATION CONSOLE:-
here define Publication, subscription and site ( OLTP) , and define replication objects ( like BUPA_MAIN, BUPA_REL)
4) define Queue: SMQR and SMQS - inbound and outbound queue /
Que registration .
5) check entry in R/3 side tables:- Make the proper entry into R/3 side tables in SM30
a)CRMRFCPAR
b)CRMPAROLTP
c)CRMSUBTAB
d) CRMCONSUM
These are important steps for Middleware settings between CRM & R/3
In addition to this , you need to correctly define your
1) in CRM ,BP GROUPINGS with Internal Number range
2) in R/3 define "Account Group" with "External Number Range" for BUSINESS PARTNER
3) In R/3 , Mapping of CRM CLASSIFICATION with R/3 account group...e.g. Classification B for customer with ACCOUNT group of R/3
You need to also map in CRM correctly the partner functions and R/3 Partner functions.
regards,
PD
Reward points if it helps...

Replication from CRM to ECC and vice versa

Hi,
I am a newbie and would really appreciate any of your advice and help. I was given a task to replicate business partner from CRM to ECC. I was advised to go through a building block in SAP Best practices for CRM called C03:CRM Master and Data Replication. I've read through the materials and found out that there are some prerequisites. Do I need to installed all of the prerequisites before I can proceed with the steps given in the building block. I hope anyone could reply to me as soon as possible.
Regards,
Julianna

Hi,
Thats right! C03 best practices would be certainly helpful to you.
Few important steps for BP repllication from CRM to ECC would be
In CRM , First define your Logical destination in BD54 .
1) SU01 Transaction to create users : create user in CRM & R/3
2) Transaction code SM59 : Create RFC DESTINATION .. here u use the users created for reaching into R/3 from CRM
3) transaction code: SMOEAC: ADMINISTRATION CONSOLE:-
here define Publication, subscription and site ( OLTP) , and define replication objects ( like BUPA_MAIN, BUPA_REL)
4) define Queue: SMQR and SMQS - inbound and outbound queue /
Que registration .
5) check entry in R/3 side tables:- Make the proper entry into R/3 side tables in SM30
a)CRMRFCPAR
b)CRMPAROLTP
c)CRMSUBTAB
d) CRMCONSUM
These are important steps for Middleware settings between CRM & R/3
In addition to this , you need to correctly define your
1) in CRM ,BP GROUPINGS with Internal Number range
2) in R/3 define "Account Group" with "External Number Range" for BUSINESS PARTNER
3) In R/3 , Mapping of CRM CLASSIFICATION with R/3 account group...e.g. Classification B for customer with ACCOUNT group of R/3
You need to also map in CRM correctly the partner functions and R/3 Partner functions.
regards,
PD
Reward points if it helps...

Connecting multiple CRM systems to one backend R/3 and vice versa

Hello experts
Can you tell me whether it is advisable to connect 2 CRM systems to a single backend R/3 and vice versa? Is it recommended by SAP? I require some notes or docs on this. I got some notes on this forum but they are all Internal ones which I am unable to see.
Please help!
Warm Regards
Debolina

Hi,
Though SAP does not recommend connecting multiple systems to one ECC backend. But still it has designed a procedure to achieve this.
Here is the excerpts of the steps required.
1. Execute report MCRM_SETTINGS for each CRM system connected to the ERP
system.
2. Check the entries of the table CRMRFCPAR of the connected ERP system:
The field REM_LOGSYS should be filled for every entry marked with
u2018Created by the MCRM reportu2019.
3. Activate the corresponding consumers in the table CRMCONSUM
(transaction SM30).
4. Internal and external number ranges for Business Partners have to be aligned
manually.
Hope it helps you!!!!
Good Luck.
Pardeep

User showing locked in SU01 but not in BP-Internet User and vice versa

Hello,
Why is it when when a user is locked in their CRM SU01 it won't show that that same user is locked on their BP-Internet User Tab and vice versa. We are eexperiencing issues where our web users are getting locked out. Are support team only has access to the web users BP-Internet User tab. When the suport team goes to unlock the user the lock check box is not checked in the BP. But when you go to the SU01 the account is showing as locked and vice versa, we're seeing the BP lock box checked but on the SU01 it says the account isn't locked. Isn't the BP-Internet User tab reading off of the SU01 account?
Thank You very much,
Alex

Hi,
From your question, I infer that the BP and CRM are using multiple User Management Engines (UMEs). If you have a centralized UME, you should not experience this issue. Please post back with complete details.
Rgds,
Raghu

Is there a tx to view class corresponds to a BOL object and vice versa???

Hello experts, is there any transaction or place where I can find the object BOL that corresponds to a CLASS and vice versa,
For example for object ISUORDERITEM, where I can find this??
Thanks in advance

Hello Javier,
Here is the link :
SPRO --> IMG --> CRM > CRM Cross-Application Components> Generic Interaction Layer/Object Layer --> Basic Settings.
How to find out the component set associated with the BSP UI component ??
Go to the runtime repository of the component which you are working on, In the MODEL, the Component Set should be assigned.
Once you get the component set, You can find the components associated with the component set.
For each component there will be a GENIL Class associated in this IMG customizing.
Eg : For BP , the class is CL_CRM_BUIL.
You can find some infor at this Link: [Thread|Re: Rough Equivalent of PCUI MAC in CRM 2007 Web GUI.]
Hope this helps,
Regards, Vinay

Is it possible to replicate NT to a solaris platform and vice versa.

Is it possible to replicate solaris to an NT system and vice versa.If so, what is the best soultion. Please advise.

Hi,
I'm not able to understand your question, can you elaborate on your problem so that I can provide you the best of solution.
However, if you mean, replicating iAS on NT with iAS on Solaris, then, replication is not possible. But there are other methods to adopt.
Regards
Ganesh .R
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support

My family of four (2 iPhones, 2 iPods) all share the same iTunes account. Many text messages sent to or from mine or my husband's phones are also received on my daughter's iPod, and vice versa. How do I fix this?

How can I keep text messages sent from my or husband's phone from being received on daughter's iPod, and vice versa? We have five devices on one iTunes account - 2 iPhones, 2 iPods and an iPad.

Hello Hrd1977,
This is typically caused by both devices sharing an Apple ID for iMessage and FaceTime. I would recommend signing out of iMessage on your daughter's device. Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out. Then sign in with the desired Apple ID.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers,
Allen

While inserting numeric data into a character datatype field and vice versa

Sir,
I have a very basic qiestion.Why am i not getting any error while inserting to say employees table a character type data to a numeric type field and vice versa?Iam using Oracle Database 10g Enterprise edition.

Why am i not getting any error while inserting to say employees table a character type data to a numeric type field and vice versa?
Oracle tries an automatic conversion, when possible. Post an example of a character type data inserted into a numeric column.

I just got 2 new iphone 4 (verizon) i have a issue, i have 2 itunes account 2 phone seperate names and emails. but when i update or sync my phone it copys my wife stuff on to my phone and vice versa.

hello
i need some help.
well you see up above where i have 2 iphone 2 different names for the phones and 2 different accounts with 1 itunes on widows 7.
my problem is when i update or sync my phone it grabs all her info and apps ect. and vice versa when she does it to. is there any way that i can stop this from happing again?
1 more thing this happens just on her phone when she goes to download a app for some reason my email is on her phone, we have to sign out from her phone and sign back in and put her email in any thoughts on this?

By far the simplest way to do this is create separate accounts on the computer for each person. That way, you each log into your own separate account, sync your own device(s) to your own contacts/calendars/apps/music and so forth.

My nephew and I use the same iTunes account and when I add an app it is loaded on to his iPhone and vice versa... How do I make that stop?

My nephew and I use the same iTunes account and when I add an app it is loaded on to his iPhone and vice versa... How do I make that stop? I have already unchecked the "Auto Update Apps" button. It happens with all purchases in the app store and on iTunes. HELP!

I also think separate accounts is the way to go....if he is over 13yrs also remember if you do make an account for him and use your bank card all purchases will be charged to your card.

HT1766 Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?

Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?

You can share the same Apple ID in
Settings > iTunes & App Store > Apple ID: here
But for all other Apple services like:
FaceTime, iMessage, iCloud, etc, one of you should use a different Apple ID.

Email sent on my iphone 5 does not show in the sent folder in mail on my macbook pro and vice versa especially since update to Yosemite

I have an iphone 5 and a Macbook pro. Since upgrading to Yosemite, when I send an email from my yahoo email account or another email account linked to my website, on my iphone, the emails don't show in the sent folder in mail on my macbook pro and vice versa.
I have deleted the accounts and re-created them on both my iphone and macbook pro but the samething keeps happening.
When last I was at the istore, they were unable to sort it out and said I needed to book it in.
Any suggestions that will prevent me from booking my macbook pro in are welcome.

Hi,
Are you saying you are trying to synch iMessages across two iPhones ?
Or do you mean you are trying to get iMessage that were synced to one iPhone to show on another ?
Whilst the first is possible - from the date you add the second iPhone the second is not possible.
10:11 PM Saturday; January 5, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My partner and I share and iCloud account, we updated our software now whenever she gets a text message I see it on my phone and vice versa

My partner and I share an iCloud account . We both have the iPhone 5. We recently updated the software to the iOS 7.2 and now whenever she gets a text message I receive and vice versa. This never happened before only happened since the update

iCloud has nothing to do with messages (iCloud does include an email account, but not a messaging service). If you both use the same AppleID for iMessage, then you are sharing the same messaging account.
One of you needs to get an alternate AppleID, sigin out of iMessage, then sign in with the alternate AppleID. That way you will each have your own private iMessage accounts.

Rebate Agreement Replication CRM to R3 and vice-versa

Similar Messages

Maybe you are looking for