Rebate Agreement :SDBONT06

Hi ,
I am using ECC 6.0 and have configured rebate agreement . In VBO2 in am getting an Information massage "The sales volume for agreement  is not current". I run the program "SDBONT06" (Transaction Code:VBOF)for updating the sales volume for the agreement.But still this massage comes and the sales volume showing 0. Am i missing any thing.Kindly advice ...
Thanks In Advance.
Regards,
Abhijit...........

Hello experts
I have a problem using report SDBONT06:
have one invoice with 3 items, all 3 items have the same contition of
rebate. The diference is that the "access Sequence in analyse of
pricing " of item 1 is different of access sequence of item 2 and 3.
Note: The access sequence of the contition type includes 4 tables of
access. Item 1 find access in table 1 and item 2 and 3 find access in
table 3.
The invoice that i refer before save the 3 contitions in all 3 items,
but when i run the report SDBONT06 i get the information "condition
deleted" of item 2 and 3 of invoice.
This report can not delet the rebate conditions in same invoice if the
access in all different items are different.
Steps for Reconstruction    
Agreement: 1000000017 - Agreement type ZBM2
Billing document: 1601000024:
Item 10 - Analysis: Condition type ZP1A - "Condition record has
been found" - access 01(ZBS1)
Item 20 - Analysis: Condition type ZP1A - "Condition record
exists, but has not been set" - access 03 (ZBS1)
Item 30 - Analysis: Condition type ZP1A - "Condition record
exists, but has not been set" - access 03 (ZBS1)
Can any one tell me why the report delet the conditions of item 20 and 30?
Thanks
Lina

Similar Messages

  • Settlement of rebate agreement for previous period

    Hi Friends!
    This is about rebate settlement (Partial settlement) for rebate agreement documents. We have a process of creation of retro-active rebate agreements and then the sales invoices are updated through a backgound job (program SDBONT06). At the month end there is another background job (BON_ENH_SETTLE) for partial settlement for a month.
    The above program is able to create rebate credit notes for respective months but there are updated invoice documents (accruals) in previous month. The background jobs are not able to settle the rebate accruals which are generated in previous months.
    My question is that if we input the settlement period (ex june) for that particular month and the settlement date (30th June) in selection screen of program BON_ENH_SETTLE, would this ensure that the credit note can be generate for the month of june?
    regards,
    Praveen.

    Hi Friends,
    Can any one please help me on the mentioned issue. It's bit urgent.
    Thanks & regards,
    Praveen.

  • Final Settlement for Extended Rebate - agreement status not updated

    Hi,
    When doing final settlement via the Extended rebate, a CM is generated, but the status of the agreement is not updated to D.  Any configurations needed or steps to be done? I thought it should be automatically updated by the system..
    Thanks,

    Hello
    Refer following links with SAP Note for reference/understanding:
    - The sales volume for Rebate agreement  is not current
    - Sales volume not current in Rebates
    - 456458 - FAQ: How does SDBONT06 work
    Thanks & Regards
    JP

  • Accruals not updated for Changed Rebate agreement when VBOF  performed.

    Hi Pals,
    Need your assistance in solving an incident  . our client has changed the  valid to date  of the  rebate agreement on 29.04.2014  in VBO2  from 28.02.1014 to 31.12.2014, later it was observed that  the rebate accruals for the blling documents generated after 28.02.104 to till date were not updated even after running the report VBOF. There are 15000 invoices after 29.04.2014 , hence it is difficult to check which invoices carries my rebate condition type.
    hence pls advice on
    1. how to find out the invoices for the changed agreement .
    2. How to update the accruals for the invoices that were created after  28.02.2014 to till date.
    An early reply would be highly appreciated.
    Br
    Krishna.K

    Dear krishna
    i tried your scenario--so after changing the validity for my Material rebate agreement type--i ran VBOF(SDBONT06)--so system has shown the updated billing doc with rebate which was not having any rebate condition earlier.
    Have you tried by retrieving all the billing docs created after service render date of 28th Feb14.
    Please take all the billing docs created after this date from VBRK table and you check some random billings docs whether rebate condition type is active with condition record or not.
    (other wise you try with by executing condition record numbers in KONV(doc condition number--then followed by VBRK)
    pl update us..
    Phanikumar

  • Table linking rebate agreement to billing doc?

    Hi,
    Is there an SAP table that contains both rebate agreement nbr AND billing doc nbr? I have a requirement to extract this info for one of our pricing team.
    Thanks in advance.
    Mike

    Hi,
         Run the Report "SDBONT06" in the Test Mode It should give you the list of billing documents per the particulat agrrement. You can take this data.
    Regards
    Ram Pedarla

  • Rebate Agreement Sales Volume

    Dear All,
    We have a strange issue in Rebate Agreements.
    When we Open Rebate Agreement in Change Mode and click on Sales Volume Button ( Shift F5) then it navigates to Sales Volume Screen. Now if we change the Agreement Status to B ( Agreement Released for Settlement) on the Initial screen and then go to Sales Volume Screen then at the top of the screen their is a Information which says
    There are messages
    This Information message is not shown for all rebate agreeements. It is getting shown only for few agreements which we do not have any clue as to why it is happening?
    Can any one throw some light on What does this Message " There are messages" means? Because on that screen their is no option to check what messages the system is referring to.
    Also in which scenarios this occurs?
    Regards,
    Madhukar

    Hi Aayush
    When you rebuild the rebate index table VBOX all agreement conditions will be set to retroactive again. I guess someone has run RV15B001 on your system in the meantime ? 
    The "Sales Volume is not current" message is issued when the rebate condition is flagged as retroactive (KONP-KSPAE) SDBONT06 resets that when it has completed a successful update
    So just run SDBONT06 again, all of you 93 agreements are updated so the report will only reset the KONP-KSPAE field on the conditions in that case.
    Hope it helps you further
    Kind regards
    Brian

  • Rebate Agreement (VBOF)

    Hello Experts,
    I have a standard Rebate Scenario. I have Rebate Agreement created for a recepient.
    I also have some invoices for the same. But when I check Invoices they are not updated with the Rebate Conditions.
    When I tried to run VBOF it did not give any results for the Invoices updated but when I looked into the Invioce the Condition was updated. Then I tried to look into the Rebate Agreement for the Varification Level I can see the condition recored created for % discount but I cannot see the Invoice listed.
    When I tried to create the another Test Case for the same I am continuously getting the error as "The sales volume for agreement XXX is not current"
    Then I put some value manually in the "accrual to post" it allowed to create the Credit Note for Settlements.
    Could sombody please guide on the same? What could have I missed?
    Thanks in advance for the same.
    Regards,
    hp

    Hi
    First of all run the report SDBONT06.After running the report then check wheather it is getting updated or not.Secondly also check in the rebate agreement what is the validity end period.While running VBOF give the validity period which is there in the rebate agreement.
    Please refer the following thread
    Rebates
    Regards
    Srinath

  • Sales volum for extended rebate agreement

    HI All,
    i made an extended rebate agreement and asales order accordein to this agreement, dleivery and billing then i returned back to the agreement to make settlement but i found this massage (( The sales volume for agreement 131 is not current)) i runed the report SDBONT06 but the massage still present so can u help me pls.

    Hello
    Refer following links with SAP Note for reference/understanding:
    - The sales volume for Rebate agreement  is not current
    - Sales volume not current in Rebates
    - 456458 - FAQ: How does SDBONT06 work
    Thanks & Regards
    JP

  • VBOF-updating rebate agreement.

    Dear Gurus.
    I am in ECC6.0, i am updating invoice in rebate agreement which is created prior to starting validity of agreement
    with t Code VBOF/SDBONT06.
    i had gone through following thread 
    Rebate functionalliy is not working properly
    so after updating  OSS Note 456458  will really resolve the issue???
    Reg,
    Antaa21

    Hi,
    It is still not clear what kind of problem you have met during running of VBOF.
    Have you met any error?
    The note 456458 contains a modification which is used to solve the error as it explains
    in point 11:
    11.        Question: What does: No correction because of value-change
        mean?
    Answer:
    After pricing, either the net value or the tax amount has changed.The
    document must not be updated with these new values because it has been
    transferred to accounting.In general, this problem is caused by errors
    in Customizing of pricing, in particular customer-specific
    formulas.Check formulas and user exits in pricing for consistency.If you
    cannot correct the inconsistencies, you can implement the attached
    modification in report SDBONT06.As a result, all condition values are
    fixed (KSTEU = 'E').In most cases, no more value changes should occur
    then.
    After you implement this modification, during execution of VBOF, in case there is any
    pricing change, they sys would fix the conditions so that the change would not occur
    which could help prevent the error : No correction because of value-change.
    Regards,
    Alex

  • The sales volume for Rebate agreement  is not current

    Hi All
    I am getting an Error in Rebate VBO2- Sales volume is not current
    I am working in ECC6.0 & my agreement type customer rebate.
    Have maintained records in VBO1 & in billing -condition tab the correct % get populated. But the same is not displaying in VBO2.
    As per sap note in OMO1 i have updated S136 to synchronous updating 1. Also i execute program SDBONT06. In VBOX also i tried to update various parameters.
    Customer statics maintained-1
    G/L's maintained correctly.
    But still i am facing the same error in VBO2, 'sales volume for Rebate is not current'.
    Please anybody can help me on this.

    Hi deepa
    Run VBOX and check the box update billing documents and give the sales area and then execute and save it and if possible try to give the billing documents if you have any idea or else just generate.After generation again open the rebate agreement VBO2. so that the data gets updated by that time
    Go to OMO1 and  check wheather the infostructure S060 is in Asynchronous updating 1 or  Asynchronous updating 2 or No updation. If it is No updation then update the infostructure
    Regards
    Srinath

  • Rebate condition in rebate agreement cannot be maintained (greyed out)

    Hi.
    We have setup rebate processing in CRM 7.0.
    We get our invoice to the billing due list and it fills then the extract. But we fail in setting up the rebate agreemnt in the webui.
    Partner and material are entered. On the position (material) we try to add one of the conditions of the maintenance group we customized. Both condition types can be selected but none of them will work.
    What happens: we click on "new" select the condition type and get then presented with the view but with all fields greyed out (as in display mode).
    As there are a lot of obligatory fields we get up to 8 messages. After "fill in required entry fields" it says "maintain rebate material".
    Whatever that means.
    The material we use is a finished product.
    Has somebody ever seen this or some idea. Couldn't find oss messages on this.
    Thanks.
    Regards,
    Thorsten

    Hi Klaas,
    If I remember well, in the standard price determination there is a conditional formula that only shows rebate conditions in the invoice, therefore you should not see rebate conditions in the sales order.
    That is standard functionality.
    For a Customer I took out the formula condition in the pricing so he could actually see the rebate condition in the sales order, the reason was to had access to this information before end of month invoicing. The problem is that in case of changes in rebate agreement or in case of retrospective agreements the rebate condition is only updated in the invoice, not in the sales order.
    Best Regards,
    Franck

  • Report on rebate agreements

    Hi,
    Iam developing a report on rebate agreements. I want to display all the credit memos and all the invoices under one rebate agreement.
    I can see all the credit memos in agreement in following way.
    Go to vbo3Give one agrrement number and go to menu rebate payments-rebate documents.
    I can see all the invoices under rebate agreement in following way.
    Go to vbo3Give agreement number andd go to menu rebate payments-drill down.
    Now my question is how can I know which invoice belongs to which credit memo.
    Basically I want to know the linkage between credit memo and invoices under credit memo.
    Hope I explained the question clearly. If not please let me know I can explain it in better way.
    Thanks in advance.
    Brahma

    Start SQL trace in transaction ST05. Run the report. End the SQL Trace. Review the results.

  • Rebate Agreements - Free Goods payment

    Hello,
    We're currently using SAP Standard Rebate Agreement process.
    Final Settellment is generating a credit memo request, then converted into a credit memo.
    We hava a user request to stop using credit memo and to deliver free goods instead.
    The only solution we have today is to follow accruals using the rebate agreement, then to reverse the accrual manually and to create a free good order seperately.
    Is there any way to manage payment of rebate agreement with free good delivery.
    Target is to keep an integrated process.
    If someone already solved this type of request, we would be interested.
    thanks for your help
    best regards,

    Hi,
    By raising credit memo, we are just creating a liability that we have to pay / adjust to client for the rebate discount due. Payment method can be set in agreement master and while posting credit memo to accounting, will be passed to accounting. This data can then be used by FI - AR team to make the payment.
    Regards,
    Naveen

  • Rebate agreement-Difference coming for credit note value and drill down value .

    Hello Friends,
    In 2013 we had created one rebate for which the validity period was 1st April 2013 to 31st March 2014 . At the end of each month, rebate amount was settled by raising credit note to the customer . Now at the end of March'14 during final settlement, a credit note was raised to the customer . The issue here is there is difference of 1.13 (Pounds) between credit note value and the drill down value for March'14 . Lets say our credit note value is-100 (Pounds)and Drill down value for the month March'14 is 101.13 Pounds. We are not able to find out why this difference is coming . Please let me know your inputs on this .
    Regards,
    Sandeep G. 

    Sandeep -
    During final settlement of a rebate agreement, it calculates rebate amout for the the entire time period less payments already made to a customer and then issues a credit memo request based on that.Please check all the the invoices created during entire period and check accrual calculation.It should match.
    You can check VBOX table to get billing documents for the entire period.
    Let us know if you still have an issue.
    Thanks & Regards
    Amit Gupta

  • Settling Rebate Agreements with Validity Start Date not Start of the Month

    Hello Experts,
    I am currently trying to settle a rebate agreement with validity dates November 20, 2011 to December 31, 2011. However, after the credit memo is created, I noticed that the Service rendered date is today's date, but I expected it to be the same as my Settlement Date = November 30, 2011 (a month-end). Please advise if this is normal. If not, please advise how to correct the automatic entry of dates.
    Thanks,
    M

    Hi
    Kindly let us know what is the rebate agreement type that has been used for which you are facing problem and for which rebate agreement type you are getting the month end date.Check wheather scale basis is B(Value scale) has been maintained or not for the rebate agreement for which you are getting problem.So check the differences between the two rebate agreement types.As The service rendered date of the invoice line item is used to determine the validity of a rebate condition record
    Regards
    Srinath

Maybe you are looking for