Rebate Basis VBRP BONBA showing double the value

Hello
In the pricing procedure the rebate basis is carried over to sub total 7 which means that it is stored in VBRP - BONBA. Normally tthe condition value against rebate basis in the billing document is same as that of VBRP-BONBA for a given line item. But only for selected billing documents this value is doubled in the table but not in the document.
for ex I have a billing document 70000516, if I open the billing document pricing screen for item 10, I see the rebate basis value as 18,000.00 USD. But if look in VBRP for the same item, BONBA value shows as 36,000.00 USD.
unfortunately this happened only for 5 billing documents. Nothing is changed in the pricing procedure nor in the condtion type.
Any idea on why this happens only for selected items.
Thanks,

I found one interesting configuration in the pricing procedure. The Subtotal field 7 has been assigned to two step numbers.( Rebate basis - step 200) and (Sales price - Step 300). May be because of this the value is cumulated for VBRP-BONBA. But surprisingly this is happening to only selected documents and items. If the configuration is wrong, then should this not happen to all the documents with the same pricing procedure..
I am breaking my head as to why this is happening to only selected documents. Any help with this is appreciated.
Thanks,

Similar Messages

Livecache remote cube report shows double the value in BW reports

Hi,
We are trying to report against livecache using remote cube and getting
doubled values in reports where as direct report against livecache is showing different results.
Transaction: RSA3
Data Souce: Livecache
Planning version: 000
Loaded one particular product
Then consensus forecast shows a value 250.
The same information if we try to access using BEx analyzer 3.x then
Consensus forecast = 500
Which is DOUBLE the value than it is using RSA3. Why is it doubling? Please let me know if you come across similar issue.
Thanks,
Srini

please check the Remote cube contents as well. Go to ListCube transaction enter the remote cube and check the contents of that cube.

Profit center report showing double the plan value comparing to cost center

Dear Friends,
We have an issue with the profit center report wherein we have maintained forecast value in version 2 in cost centers and when we run profit center report the values are showing double the value which we maintained in cost centers. Is this the problem in running 1KE0 transaction.?. We have run 1KE0 to update the missing value by deleting the existing values, so few profit center report is corrected but many other profit center report has gone wrong.
Could you please guide me to correct the values. Business requires to see the same value in cost and profit center. Note; We have created cost and profit centers the same code and assigned to each other.
Thanks,
Lokesh

No answers yet

How to double the value of MLIN and MCINDN in AWR MWO

Dear Sir,
I want to know the double values of both MLIN and MCINDN in AWR Microwave office. Because ordinary inductor(L) , we can double it very easily . Similarly equivelently we need to double the value of the MLIN and MCINDN. What I need to change in MLIN and MCINDN to get the as similar doubling value of normal inductance ( Example L = 50 nH double L = 100 nH). Can you anybody help me.
Attachments:
MLINandMCINDN .png ‏91 KB

Mohi_kh Sir,
I understood, what you said. What is my difficulty is, I have used ATF54143 4 pin IC to my work . As you know ATF 54143 4 pin IC one is gate , another one is drain and remaining two pins are internally connectd to source. Earlier What I did
( 1 ) I used the normal lumped inductor at the source. Ideally I doubled the same inductor value and connected at the two sources, two parallel double inductors values will become single inductor value (without double value).
(2) Instead of normal lumped inductor , I used the tuned equivelent microstrip value at frequency 2.5 GHz at the one of the source of the ATF 54143 transistor. What is my doubt is, two sources are there for the ATF 54143. How we have to connect the tuned equivelent value of microstrip line at the two sources of the ATF54143 transistor. As I discussed in the # 1 point , I doubled the single inductor value and connected at the two sources of the transistor. Similarly What I have to do for the single MLIN ,what I used. Shall I connect the MLIN at one end of the source and leave the other end of the source as it is by connecting the ground. Can you give solution, what I have to do , I used the MLIN at the source.
(3) Intead of normal lumped inductor, I connected MCINDN for some other purposes to the one end of source of the ATF54143 transistor. Here also, I am also facing the same difficulty as I discussed in the point # 2. What I have to do other end of the source of the transistor. Shall I leave the other end as it is by connecting the ground. Can you suggest me , what I have to do , because two sources are internally connected.
Attachments:
ATF54143_Nonlinear_device_model.png ‏323 KB
Pin_Connection_of_ATF54143.png ‏299 KB

Changed e-mail password, showing double the amount of e-mails

I recently changed the password on my Comcast e-mail account on my iphone . When I get a notification that I have new e-mails, it will show double the amount of new e-mails that are actually in my inbox. Ex: the icon may show 10 new e-mails, but I really only have 5 in my inbox.
Any suggestions?

Hello DRB1962
Check to make sure that you validated the device within your account on webmail.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/HT1694
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Prompt in webi not showing all the values

I have created a universe based on a BI query.in the BI query there is a variable for the profit center which has been used in the characteristic restrictions.When i create a webi report based on this universe,the prompt for the profit center is showing only 1 value.It is not showing the rest of the values.Pls help.

Hi,
1. Try to check at BI query level whether values are there for profit center column or not.
2. Try to do what susney said. If it doesn't work follow 3.
3. In universe level go to the profit center object on which you created prompt-> click on object properties -> properties -> edit list of lovs -> then a query panel appers to you -> run and check whether all the values appering to that object ot not.
4. If all the values appering then check whether any filters are applied to profit center object in universe level/report level.
Cheers,
Suresh Aluri.

How to omit showing while the value is 0.00

Hi dear friends
I am now using a very very simple multıple without java and any special code. By just the simple Multiple Fuction of Adobe Acrobat Pro.
I want the field to be compeletly off when its equalling 0. NO that I am usıng somehow the functıons of adob ıt's wrıtten 0.00 and the currency ın front of that. I'm just gonna remore everythıng when ıts 0.
Would you please help me please?
Thanks a lot
Hasan

This can only be done using custom JavaScript in either the calculation field of the validatation tab's custom JavaScript.
I have found the following validation script works with any type of calculation for a Number field.
if(event.value == 0) event.value = "";

F4 help is not showing all the values

I am using infoobject Company code which has about 50 values. when I used this infoobject in the report, in selection screen f4 help I could see only 20 values for this company code infoobject.

Hi ,
For F4 Helps , kindly check the following OSS notes :
1 796737 - F4 modes for value help .
2. 817335 - Performance in F4 Help
3. 748623 - Input help (F4) has a very long runtime - recommendations
You can also check other related notes for F4 help which are mentioned in these notes .
Regards,
Lokesh

I want to purchase an ipad but the program I would use onit the most to access my customer base will not show me the full screen and I can not side it over to show the rest of the ifo. Tis program will work on the Motorola xoom but thats not what I want .

I want to use sagefire a company program for entering customer info and billing but the Ipad will not show the entire screen.

Embie wrote:
I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware. Great. I will replace my faulty hardware manufacturer. Simple, HP never again.
In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you. Please read this post then provide some details in a new thread. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? What is the problem you are having (with the printer...)?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Planning book values for certain key figures show doubled up numbers

currently on SCM 7.0, we are facing a strange intermittent issue of doubled up values in planning book for certain key figures when compared to the underlying Infocube.
This happens when the Input process step happens, some times when the process step fails in chain and is run again.
After its run then we load data to the planning book , then when the key figures show up for the current week bucket they show Doubled up values
We tried to run a consistency check /SAPAPO/OM17 (DP time series option) but no result.
Can anyone mention what could be the reason ?

Hi,
Please check the data in the cube for the codes . There could be double request for the same keyfigure. When you copy from cube whatever value avilable in the cube gets into Planning book.
Transaction : LISTCUBE
Solution : Delete the old request and check the value agina in cube. Execute the TSCUBE.
Thanks,
Jeysraj

Displaying the Values of Varaibles in the WAD 7.0

Hi,
I have created a query Q1 with Restricted Key figures. In the KF's I have a strcuture as : Col 1 = Current period, Col 2 = Prev period, Col 3 = YTD to Period, Col 4 = YTD to previous period, Col 5 = last year YTD to period, Col 6 = dummy. However, I have used 0I_FPER in Q1 Col6 only. For the other cols in Q1 I have created two user exit Varaibles ZPER1 and ZYTD1 to calculate the period intervals using the DATE TO from 0I_FPER. I have used these variables in the respective restrcited key figures.
I also have another query Q2 that shows YTD and this has the variable 0I_FPER as filter in the query.
I have set up a WAD tab report and used the same variable 0I_FPER in both queries so that the user only needs to input the variable values once. I have used containers for the Tabs, and effectively assigned Q1 to Tab1 and Q2 to Tab2.
Now, I am using the Info Field web item in the tab reports. I want to display the 0I_FPER in Tab 2 and display ZPER1 in Tab 1. I can display 0I_FPER correcly in Tab2, but I cannot display ZPER1in Tab2. I get the message that the DP1 does not have ZPER1.
Although the query Q1 is using the variable in key figures it does not allow me to display it as part of the Info Field web item. the variable is not available in the dropdown although 0FISCPER is available. However, when I use 0FISCPER it still does not show me the values of ZPER1.
Does anyone have any suggestions please ?
thanks

Hi Bal, I've had exactly the same issue, and couldn't figure a way. I tried to use Exit variable value in query output in Web Analyzer/WAD using &VARNAME&; Also tried using some Text Variable with Replacement Path, formula variables & help cells etc. But none of the above methods didn't help as the exit variable hasn't any input value or isn't physically holding related values for references returned from exit logic. However, we can debug using RSRT > Debug Mode > Set Breakpoints to check correctness of logic used. Plus, we can also use the query in workbooks to check the the values of a particular filter in cells. Suggestions anyone? Thanks.

How can i see the values of a prepared query

Somebody knows about a tool that show me the values of a prepared query.
I tried with the view V$SQL and with the TKPROF, but both show me the same query text and i need to know the parameter's values. Example of a prepared query - I don't know if it is the correct name of that kind of query.
UPDATE "CL0E01" SET "BLOQUEO"=:1
WHERE
"CLAVE"=:2 AND "NUM_REGS"=:3 AND "ULT_CLV"=:4 AND "BLOQUEO"=:5
Is it a tool that show me the value??
Thanks for the help.
Roberto Moreno

I tried with the view V$SQL_BIND_CAPTURE but i get this error. "ORA-00932: inconsistent datatypes: expected CHAR got -". I executed in the Application Express.
What could be wrong??
I put my STATISTICS_LEVEL to ALL but nothing happen. I recieved the same result.
I executed the view V$STATISTICS_LEVEL, for the Bind Data Capture I have enabled the session and system status, the activation level is TYPICAL.
Thanks for your help TongucY

CJI5 commitment line item report not showing po gross value

Dear All,
system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
Example:
po net value: 1000
st 10%: 100
po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
what could be the reason for not showing po gross value in commitment line item report.
Thanks & Regards,
Sandeep

Hi,
As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
Regards,
Gokul

Currency F4 only shows info provider value instead of all values

Hi Guys,
I have a BI query in which the currency object is restricted with a variable.
I executed the query.
In the intial variable selection screen, i clicked on F4.
This variable only shows me the value from Info Provider.
But instead of that, i want to fetch all the currencies in the F4 help.
I have tried Query Filter Execution set to Master data but that too doesnt help.
Please please can someone help in it.
Regards,
Charu

Hi All,
Here are the steps i did for the currency conversion.
1. Created the conversion type.
2. Exchange rate type -> M
3. Selected Dynamic exchange rate
4. In the currency tab selected source currency from data records.
5. Target currency i selected Target currency from variable.
6. Variable is the one created on the 0CURRENCY object.
7. Time reference is the exact day and 0CALDAY is selected in it.
8. In the query, created a calculated key figure and assigned this conversion type to the CKF.
9. I have just dragged the 0CURRENCY in the row.
10. For currency in the Advanced tab in query i selected master data option for the filter.
When the query executes, it asks for the value of this variable.
When i select the F4, it should show me all the currency values, but it shows me only INR. In the search if i give EUR manually then it takes EUR but doesnt show me in the list.
Is there any step that i have missed out pls.
Regards,
Charu
Edited by: Charu Pandey on Jun 18, 2009 6:02 PM

KKS2 ran for future periods; Target costs double the actual costs

Hi
Variance calculation was accidentally run for period 011/2012 and it affected several orders in that the target costs are showing double the actual costs (period 01 + period 11) of year 2012.
Is there some report in SAp that would give us a list of orders for which KKS2 (variance calc) was run for period 11 2012.
Best wishes
Raj.

hi
Thanks for your responses. But nothing has answered my question
Is there a report in SAp that could give me a list of all orders for which variance calculation was run for period 11 2012?
I used several reports including KOB3 and s_alr_87013140 but nothing gives me that list.
Thanks in advance for your replies.

Rebate Basis VBRP BONBA showing double the value

Similar Messages

Maybe you are looking for