Rebate condition record T code VBO1-Error Message
Hi,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
(This error has occured while i am testing rebate process in IDES and it happen while creating condition record for rebate agrement,After filling the initial values in T code VBO1 and when click on enter the above mentioned error message has come).
Please give the solution to create condition record.
Thanks in Advance
Regards
Praveen P C
Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB
Similar Messages
-
ERROR Message while creating Rebate condition record T code VBO1
Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
sivaHi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB -
Rebate Condition Records Redetermination
Dear All,
When we Copy the Service Rendered Date in Billing Document into Billing Date using User Exit then Rebate Condition Records are not getting determined. If I go to the Analysis then i can see that the rebate Condition Record Exists but it does not gets set. In the analysis this is the message which shows for the Condition Record.
"Condition record exists, but has not been set"
Any Pointers as to which User Exit can be used to Redetermine the Rebate Condition Records.
Regards,
MadhukarHi,
Did you try to use transaction VBOF to rebill those invoices to set the rebate conditions.
Regards,
Rajesh Kumar -
Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0
Hi all,
I have found a error "Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-01'" while adding the DELIVERY document.
I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
Could anyone solve this problem. is there any setting which i am missing..??
Regards
SandeshHI Sandesh,
Check Sap note :1252328
and also check below thread of similar issue:
Re: 'Invalid Currency' error when attempting to deliver order
Hope this will solve your issue.
Thanks,
Neetu -
I get Exit code 20 error message when trying to install Master Collection 5.5. Please assist.
Installation and launch log errors | CS5, CS5.5, CS6, CC -
https://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html -
HELP!! I am trying to record a presentation on Adobe Presenter 10, I have had no problems in the past, I added motion to some of the boxes in my presentation, now when I try to record I get this error message!!!
Adobe Presenter
Adobe Presenter has encountered an unexpected problem while
working with this presentation. Try saving your work to a new file and
restarting PowerPoint. If the problem persists, consult the Help menu
item, or contact support at http://www.adobe.com/support/presenter.Please provide your system specification. Also is it happening on a specific presentation or every presentation.
Regards,
Rajeev. -
How find the ABAP code with Error message
Hi
How to find the ABAP Code for Error Message?
Example:
Error Message: ZF026.
Regards
Odaiah Pelley
Edited by: Odaiah Pelley on Aug 22, 2008 4:21 AMHi
Excellent Answer, I appreciate it.
My question is with Error Message ZF026.
How to find ABAP Code ?
If I go for SE91 I will get same message as if I am getting error message.It is no use.
Regards
Odaiah Pelleyu -
ERROR OGG-00868 Error code 1291, error message: ORA-01291: missing logfile
OGG Version 12.1.2.1.0 OGGCORE_12.1.2.1.
DB : 11.2.0.4.3
I am getting below error.
2014-12-31 09:53:09 ERROR OGG-00868 Error code 1291, error message: ORA-01291: missing logfile
(Missing Log File <unknown>. Read Position SCN: 2585.802983323 (11103293443483)).
Our solution uses ADG and OGG
We have source and target where ADG was setup . We later broke ADG setup and made Oracle DB's in source and target into standalone.
As part of our solution during our deployment window ,we would break ADG i.e we would make both the source and target as independent DB’s with PRIMARY Read /Write mode.
-Take Guaranteed restore point on Source DB so that we can flash back at later stage(so of now we have not executed flash back command)
-Once ADG config is disabled we will start the OGG extract which is already configured before =We are at this stage where we are hit with errors and extract is not starting .Hi ,
The error shows it is waiting for the Logfile. The Integrated extract mainly needs of the availability of two things.
1. Archivelogs.
2. Trail Files.
Both should be retained to the needed / required level.
Please execute the below query and check the status of the Extract / Capture process.
The below query displays the information of each capture process in a database.,
COLUMN CAPTURE_NAME HEADING 'Capture|Name' FORMAT A7
COLUMN PROCESS_NAME HEADING 'Capture|Process|Number' FORMAT A7
COLUMN SID HEADING 'Session|ID' FORMAT 9999
COLUMN SERIAL# HEADING 'Session|Serial|Number' FORMAT 9999
COLUMN STATE HEADING 'State' FORMAT A20
COLUMN TOTAL_MESSAGES_CAPTURED HEADING 'Redo|Entries|Evaluated|In Detail' FORMAT 9999999
COLUMN TOTAL_MESSAGES_ENQUEUED HEADING 'Total|LCRs|Enqueued' FORMAT 9999999999
SELECT c.CAPTURE_NAME,
SUBSTR(s.PROGRAM,INSTR(s.PROGRAM,'(')+1,4) PROCESS_NAME,
c.SID,
c.SERIAL#,
c.STATE,
c.TOTAL_MESSAGES_CAPTURED,
c.TOTAL_MESSAGES_ENQUEUED
FROM V$STREAMS_CAPTURE c, V$SESSION s
WHERE c.SID = s.SID AND
c.SERIAL# = s.SERIAL#;
Also run this query to check, if the capture is waiting for which logfile.,
COLUMN CONSUMER_NAME HEADING 'Capture|Process|Name' FORMAT A15
COLUMN SOURCE_DATABASE HEADING 'Source|Database' FORMAT A10
COLUMN SEQUENCE# HEADING 'Sequence|Number' FORMAT 99999
COLUMN NAME HEADING 'Required|Archived Redo Log|File Name' FORMAT A40
SELECT r.CONSUMER_NAME,
r.SOURCE_DATABASE,
r.SEQUENCE#,
r.NAME
FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
WHERE r.CONSUMER_NAME = c.CAPTURE_NAME AND
r.NEXT_SCN >= c.REQUIRED_CHECKPOINT_SCN;
The above query clearly shows for which logfile the Extract / Capture process is waiting. Check if that logfile is available in your system.
Regards,
Veera -
T-Code for Rebate Condition Record
Hi,
Can someone help me with this. I need to create a condition record for Rebate Condition type. Please give me the T-Code to create the Condition Record for Rebate condition type. Cause I am unable to create this thru VK11.
Thanks,
SumitHi
First search in the forum regarding rebate agreements. The same as been answered so many times in the forum.
For this you need to create a rebate agreement for the customers
Goto T code VBO1
enter the rebate agreement type as per your requirement BO01 or BO03
there in the screen enter the rebate recepient now from the menu press "CONDITIONS" tab
there you can enter the condition records
regards -
Code inspector error message please help
Hi All i have used delete statement as shown below
DELETE t_output WHERE remain_invoice NOT IN s_invo[].
t_output is my internal table .
Error message in code inspector is :Sequential read access for a standard table
What should i do ?I think its better to avoid delete statements inside the loop
instead of using delete statement inside the loop
use
delete table itab where condition
or
if u have to use loop at any cost
modify internal table with flag=X
and then delete all records from the itab at one shot using above statement
Regards
Vikas C -
Free Goods Condition record usingT.Code VBN1
Hi all,
We are creating a free goods condition record using T.Code VBN1.
We want to ensure that main item & free goods items are only shipped out together. How do we enable this using delivery controls in T.Code VBN1.
Regards,
Tom.We are working with free goods in the sales order and to enable this we have done exclusive free goods config.Record for the same is maintained in T.code VBN1.
Now in the sales order we have 2 line items. First line item is the main item and the second is free goods item. Sometimes, only main item stock is available and no stock of free goods. In this case the main item gets delivered which should not happen.
We want to ensure that the main item and free goods item are delivered together on a date only when both the items are available. How do we enable this.
Hope this explains the issue. Look forward to your reply.
Tom. -
RE: Code for error messages & for Multiple Selection at Selection screen
Dear Friends,
Following is the code to display PO created without Purchase Requisition Nos. Please help me with the correct code to display the error messages when PO No is entered with Purchase Requisition No & also a message should come when user enters some random or wrong PO NO.
Also, in the Selection-Screen I want PO NO, Purchase Org, Material, Plant & Date. So, please help with the code so that these options can also display the PO created without Purchase Requisition Nos.
Waiting for your valuable replies,
Suruchi.
The Code is attached herewith:
DATA: BEGIN OF itab OCCURS 0,
ebeln TYPE ekko-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
txz01 TYPE ekpo-txz01,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
banfn TYPE ekpo-banfn,
END OF itab.
SELECT-OPTIONS: s_ebeln FOR itab-ebeln.
START-OF-SELECTION.
SELECT * INTO CORRESPONDING FIELDS OF TABLE itab
FROM ekko
INNER JOIN ekpo
ON ekkoebeln = ekpoebeln
WHERE ekko~ebeln IN s_ebeln
AND ekpo~banfn = space.
WRITE:/ text-001,
15 text-002,
25 text-003,
40 text-004,
70 text-005,
85 text-006.
ULINE.
LOOP AT itab.
WRITE:/ itab-ebeln, 16 itab-ebelp, 25 itab-matnr,
40 itab-txz01, 60 itab-menge, 88 itab-meins.
ENDLOOP.select-options: s_ekorg for ekko-ekorg.
select-options: s_matnr for ekpo-matnr.
select-options: s_werks for ekpo-werks.
select-options: s_aedat for ekko-aedat.
Check the PO numbers here is not necessary because you are using a select-option(range), if something erroneous is typed, the program will simply not select it.
This would be a different story if you where using a parameter. Here you would do a check against EKKO in the AT SELECTION-SCREEN event.
at selection-screen.
select Single * from ekko
where ebeln = p_ebeln.
if sy-subrc <> 0.
message E000(00).
Endif.
Regards,
Rich Heilman
Regards,
Rich Heilman -
Table Name for Rebates Condition Records in Rebate Agreements
Hello All,
I want to know the table name which stores the condition records for Rebate Condition Types?
fast responses are appreciated.
Regards,
Rags.Hi,
Try KONA table.
KONM KONW
Regards,
Chandra -
Looking for a Utility to map error code to error message
Hi All
I am looking for a utility that would map my error codes to corresponding error messages. If you know there such a utility, please point me to it. In addition, I am looking for a utility that would validates input -- eg. length, range of input. Thanks.In addition, I am looking for a utility that would validates input -- eg. length, range of input. Whatever you do, don't use asserts for this.
-
Transcation code for error messages
hi all,
what is the transaction code for getting the system error messages?And how can I create my own error messages?
for eg: in a program, i want to show an error message to the user when the data is not showing up properly.
thnx,Hi Sey Ni,
<i>what is the transaction code for getting the system error messages?</i>
Transaction code :- St22
For Short dumps and system errors
<i>And how can I create my own error messages?</i>
Transaction code :- Se91
To check ny Existing 1 :-
Message class - XS
Message Number - 001
To create ur Own
Create a Message Class ex:- Zmsg , click on Message tab
here u can give message in front of number assigned say 001.
check the following link:-
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801b3e454211d189710000e8322d00/frameset.htm
U can call this message in ur ABAP program as under:-
if sy-subrc = 0.
MESSAGE <b>E</b>001(<b>zmsg</b>)."
endif.
E - Error message. I - Information message. S - Sucess message...
001 - Msg. Number.
Zmsg - Message Class.
Press F1 for more help on message.
Regards
Sachin Dhingra
Maybe you are looking for
-
I have file, read/ write on desktop. It's read write on the laptop via router / network. But when open now get this new message: File is being modified by Kevs, open as read- only or choose to be notified or altered when available. These network/read
-
Reg:Vendor missing in PR
Hi All, I am facing this issue, After saving the PR document with a vendor in the desired vendor field,the field has no value.What will be the solution for this. With regards Ram
-
Reader displays only black-and-white (grayscale)
A customer of ours is telling me that my Illustrator-CS2-created PDF's appear to her in grayscale-only. Those same PDF's show their proper colors just dandy on everybody else's computer I've tried, so obviously it's something on her end. Sorry, but I
-
How to Make Different Alignment for different datagridcolumn data?
As to a datagridcolumn data, when the data are A, B, or C, i want to align them left with Bold font, when the data are C, D or E, i want to align them right with normal font? Anyone can some clues to do that? Thanks.
-
Error 2738 when trying to uninstall Quicktime
Let's start off with this - I'm an idiot when it comes to PC's so keep the replies low level ? Failed to upgrade to iTunes8 so was following the troubleshooting guide, removed itunes fine, didn't restart as per the instructions but Quicktime would no