Rebel T5 will not show anything on LCD screen

I have a rebel T5 and nothing is coming up on the LCD screen. I press menu nothing, I take a picture nothing, and even try to review the pics there is nothing. I have cleaned the eye piece and still nothing. I am at a loss here. I love my camera and now I feel lost because not I know my setting are messed up! Please help!

ebiggs1 wrote:
You know the camera is working otherwise?  If yes, than you likely did turn off the display but I can't remember how on a T5.
It is in your manual, however.
Usually you just press the "Info" button repeatedly.  Each time you press the button, it cycles through the next option for what the camera can display on the rear LCD.  One of the choices in the cycle is to display nothing at all (display stays dark.)
BUT... pressing the "Menu" button should always cause the display to light up as long as the camera is switched on.
Tim Campbell
5D II, 5D III, 60Da

Similar Messages

  • My iphone 4 screen went black and will not come back on, the screen lights up but is still black and will not show anything on the screen, it still vibrates though. help

    my iphone 4 screen went black and will not show anything on it, the phone still vibrates and lights up but the screen is black, HELP.

    I have a similar problem.  I restored my iPhone 5 to the latest available OS.  After completing the process the phone never restarted.  The phone was fully charged when I restored it but now refuses to charge past the red battery icon.  I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone.  The Apple logo does come on and the software fully loads.  iTunes tells me the phone will restart but never does.  I left it to charge all night but it never appeared to load the battery.  This morning I went to the Grand Central Terminal apple store for help.  A woman at the store plugged the phone in but it never charged.  She absolutely refused to believe that I got my phone in UFD mode and loaded any software on.  I don't think it is a battery issue.  The only solution I was given was to buy a new phone.  Repairing it was out of the question.  At this point the phone is completely useless.  Thanks in advance for the help.

  • Did an update on my phone and now i have the itunes symbol and usb symbol on my screen and my phone will not show anything else, what do i do?

    Did an update on my phone and now I have the itunes symbol and usb symbol on my screen and my phone will not show anything else, what do i do?

    http://support.apple.com/kb/ht1808

  • Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black, when I try to synchronise my ipod to my library it comes up with a message saying "iTunes could not back up the ipod because a session could not be

    Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!

    Try this previous discusssion:
    https://discussions.apple.com/message/12518406#12518406

  • The MacBook Pro turn on but not show anything on the screen.. Please help me

    I have a MacBook Pro15 2011 2.2 i7. The computer turns on and makes the chime and you can hear it and the fan runs but the problem is that it doesn't show anything on the screen and the apple logo doesn't turn on Also none of the ports works

    Try these 3 things
    SMC reset:
    http://support.apple.com/kb/HT3964
    Try a pram reset:
    Power off, power on, hold the following keys, option,comand,P,R (no commas) hold thes keys till you hear the start chime 2 times, the release. Reboot and see if you have anything
    The other thing you can try is a safe (be patient as this will take a little longer boot). power off, power on holding the shift key continue to hold the shift ket till you see the progess bar, then you can release the key, let it finish booting, and try doing some things on the machine. This will disable the 3rd party software so only native sftware will run. f all is well there is a problem with a3rd party application causing the issue. Try rebooting mormal, snd see if things have gotten better.
    If not take it to the Apple store and have it disgnosed, they do not charge for this, and will give a price of repair. Most of the time it is a flat rate, if there is no evidene of liquid damage they will repair what is broken for the same price. About 13rd the price of a replacement. If your machine is less than one fear old it should be covered by the warranty, if you have ApplECare you have 3 years from date purchase.
    All the best

  • Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black but my ipod synchronises to my iTunes library. Please help!

    Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!

    Try here:
    iPod touch: Hardware troubleshooting

  • I want to purchase an ipad but the program I would use onit the most to access my customer base will not show me the full screen and I can not side it over to show the rest of the ifo. Tis program will work on the Motorola xoom but thats not what I want .

    I want to use sagefire a company program for entering customer info and billing but the Ipad will not show the entire screen.

    Embie wrote:
    I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware.  Great.  I will replace my faulty hardware manufacturer.  Simple, HP never again.
    In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you.  Please read this post then provide some details in a new thread.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?  What is the problem you are having (with the printer...)?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Itunes will not show up on the screen

    My Itunes is fully installed but after i first used it i couldn't access it again. I have tried to repair it and uninstall and reinstall it. Please Help!!!!

    Brunolucy wrote:
    One day my Iphone would not turn back on after I turned it off, now it is stuck with the apple logo on it. Also I have tried plugging it into 3 different computers now, and Itunes will not recognize it. Please help.
    Try this:
    http://www.youtube.com/watch?v=fiTcKMZfyfk

  • After updated my iPad with the latest iOS my iPad will not show me the home screen

    my iPad will not boot up like my iPhone 4 when i installed iOS 8.

    Can you explain the problems you are experiencing?
    -Ethan

  • I just purchased Apple USB SuperDrive and connected to my Mac mini 2012 but does not show anything on the screen. Not sure if its working.

    I just purchased Apple USB SuperDrive and connected to my Mac mini late 2012 USB slot but nothing shows up on the screen.
    I have OS X versus 10.10.3

    The system bus and all connected products should appear in the system profile or in the
    hardware part of About this Mac (more info) and if that does not, restart the computer with
    the external Apple USB SuperDrive plugged in. •As a last resort, if nothing else, before a
    return trip to be rid of the SuperDrive, you could try a system management controller reset.
    The SMC reset is not a first choice, so I won't post a link to the support instruction page.
    A new Apple USB SuperDrive should be seen as hardware in system information report.
    Of course, an icon of disc media should appear once the disc is inserted into the drive, too.
    Good luck & happy computing!

  • My ipod syncs but will not show anything or play any music or videos.I have tried everything possible,rebooting the ipod reinstalling itunes but no matter what I try it will not show music or videos on my device,it keeps telling me it is empty.Help!

    Ok my ipod touch syncs but not properly,I see a little icon on both itunes and the ipod rolling,itunes shows me that I have less memory available on my ipod after I sync which coresponds well in terms of memory with the ammount of songs I am loading to the ipod but I never see what I think I should see when I sync which is "do not disconnect......". I have tried rebooting the ipod and reinstalling itunes but to no avail. My ipod is brand new and everything works but for loading music and videos.I run itunes from windows xp. Help please!!

    Was the iPod previous synced to another iTunes library/computer?
    Was it setup via wifi?
    Setup via iTunes when connected to this coputer/iTunes library?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?           
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
      Try syncing using the manual method    
    Lat, restore from backup. See:                                                
      iOS: How to back up

  • I just updated to Firefox 4.0 and it will not show anything but the homepage, no bookmarks will work and I can't use th eaddress bar, why?

    Last night I updated from the old Firefox to the latest Firefox, 4.0 I think, and now NOTHING works but the homepage. None of my bookmarks work, the address bar doesn't work, nothing. I keep getting the error message "Firefox cannot find the server to the website"

    Simply go to:
    1.View 2.Select tool bars 3. Uncheck any of the toolbars below: a. Babylon toolbar b. Softonic Eng 7 Community tool bar!
    4.Finish.... if nothing happened try to unchechked other tool bars.

  • Ipad mini frozen will not do anything past apple screen

    nothing... nada.. can't connect to itunes, can't restart or reboot.. NADA

    If a reset doesn't work, force the iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Premiere elements 10 will not show the vision in screen part of the monitor.  It will play everything audio etc and behaves as normal but there is no vision.  I have restarted my computer, I have check if some rectangle is covering.  I use a pc.

    forumnotifier
    I forgot to ention I upgraded to windows 8.1

    bigredden
    What is the video card/graphics card that your computer uses? If it is NVIDIA GeForce, you are probably involved with the Premiere
    Elements 10/NVIDIA GeForce issue which forces the user to roll back the driver version to about May 2013. Since your computer
    operating system is Windows 8.1 (assumed 64 bit), there may not be a NVIDIA GeForce driver version that goes back to May 2013
    for your computer operating system.
    Please let us know the name of your computer's video card/graphics card. If you have a card other than NVIDIA GeForce, then
    we can explore other troubleshooting strategy to resolve you issue.
    Please read the Announcement at the top of this forum that details the issue and describes the how to resolve with the driver
    roll back (if possible). The following is a copy/paste of that Announcement for your convenience.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are
    experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting
    needs to be rolling back the video card driver version instead of assuring that it is up to date.    
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
    applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
    to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
    Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
    expected moving forward.    
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10
    NVIDIA reports  http://forums.adobe.com/thread/1317675    
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us    
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driverroll back
    can be found  http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html  
    We will be watching for your follow up.
    Thank you.
    ATR

  • Apps on iPhone 4s will not show up on my screen and when viewed in the app store the option to open is there but, nothing happens?

    I've bought several apps before that work fine. All of a sudden I try to download yelp and it says it is works then it's not on the screen and I can't open it in the downloads section. Any ideas on what to do???

    Hi there anaqeed,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W.

Maybe you are looking for