Reboot after applying patch 112915-05 realy necessary?
Hi,
I have a short question about the patch 112915-05 which i have to apply to our sol9 servers. The patchdescription tells me to reboot the server after the installation.
But now i woundering about the patch content. Only the file /usr/sbin/snoop will be replaced with this patch. I have downloaded the patch and had a short look into it, there is realy only the snoop binary in the patch. Is this a wrong information in the patch description or is the reboot realy necessary?
Thanks for Help
[http://sunsolve.sun.com/search/document.do?assetkey=112915|http://sunsolve.sun.com/search/document.do?assetkey=112915]
Files Included in this Patch:
/usr/sbin/snoop
Special Install Instructions:
NOTE 1: Perform patch installation in single user mode.
Reboot the system after patch installation.
For patch 119810-05 ( http://sunsolve.sun.com/search/document.do?assetkey=1-21-119810-05-1)
Installation Requirements:NAThis means no reboot required and you don't even have to be in single-user mode to do the install of this patch.
Contrast this with a patch where you MUST be in single-user and MUST reboot after patch installed:
For patch 127111-10 ( http://sunsolve.sun.com/search/document.do?assetkey=1-21-127111-10-1 )
Installation Requirements:Reboot immediately after installing this patch on an active boot environment to bring the system to a consistent state. An alternative may be specified in the Special Install instructions.
Use Single User Mode (run level S) when installing this patch on an active boot environment. An alternative may be specified in the Special Install Instructions..
Special Install Instructions: -----------------------------
NOTE 1: Before installing this patch, please install the latest patch
utilities patches for your OS. This list of patches is defined
at - http://sunsolve.sun.com
Please use the pull down list which appears after the text:
"Latest Patch Update: To ensure the correct functioning of the
patching utilities on your system, stay up to date on the
following patches"
README -- Last modified date: Friday, March 7, 2008
Similar Messages
-
Client machine force reboot after apply window patch updated
I found all of client machines will force reboot after window patching updated via SCCM 2012. Have any options in SCCM 2012 can let users to choose reboot their machine after patching ? likely WSUS, users can suspend the reboot request. Pls advice.
The notification will happen automatically if ConfigMgr installs updates that require a reboot but a reboot is not initiated so there's nothing additional you need to do.
Note however that allowing users to choose this instead of forcing it is generally bad practice because the updates aren't truly installed until the reboot happens and there have been a couple of updates of the years that cause flakiness until the system
is rebooted also.
Why not allow the users to install the updates when they want up until a deadline and then force the reboot at the deadline (if one hasn't already been performed)? This gives the user the control over the process but also forces it to happen if the user
neglects performing it.
Jason | http://blog.configmgrftw.com -
My query is not executing properly after applying patches(bi.7
iam working bi.7 support package 13
after applying patches
my query is not executing properly in production my problem with FI queries
the query is executing properly but ihav created newformula using formulavariable that fields are not getting data in report if i click on currency conversion iam getting popup but currency translation coversion list is not coming and currency type(target currency also not dispalying)
but if i execute same query in development its working properly newformula fields are getting data and currency conversion also working in development
can u please help me in this issure
i hope as soon i will get solutions from bw gurusThat currency conversion problem is solved
i checked TCODE:RSCUR IN PRD its not showing any details
again i checked in dev and moved all currency types dev to production
now its wokring
i hope check with this it will work -
Issue with updation of PAN details in ESS after applying patch
Hi ,
We have applied a new patch recently,
as follows:
SAP_HR - To patch - 49
EA_HR - To Patch - 49
When users are trying to update PAN details it says throwing error " fill in the required fields,"
i tried to apply relevent note :1243216 , but iam not able to apply it as system says it cannot be implemeted.
Can any body come accross this issue please give me solution as this issue has become critical.
Thanks in advance .
Regards,
EvaniDuplicate post.
After applying patch , error found on bottom of signon screen
After applying patch , error found on bottom of signon screen -
Portal Runtime error after applying patch 12 to portal
hi experts,
i m getting following error
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.portal.webdynpro_ws/com.sap.portal.content_administrator/com.sap.portal.wd_content_administrator
Component Name : com.sap.portal.appintegrator.sap.WebDynpro
Exception in SAP Application Integrator occured: ApplicationIntegratorException.
Exception id: 09:30_22/01/08_0005_16892850
See the details for the exception ID in the log file
after applying patch 12 in portal
i m getting this error in guided procedures,Universal worklist ,webdynpro workset undfer content administration
Please suggest me the solution
regards,
vaniHi Vani,
Just go to the System Configuration and UME configuration.
Now go to user mapping tab, and remove the entry for a reference system. Then check for the issue if persists, restart system.
Hope this helps!
regards
Atul Shrivastava -
Internet Procurement responsibility error after applying patch
Hi Guru(s):
After applying patch 5156915 we get this errro when we select i Procrurment responsibility:
The POR SSP HOME function is not available under the Internet Procurement responsibility.
iProcurement is installed.
Any ideas would be most welcome thank you.
EBS 11.5.10
Edited by: Dan A on Dec 16, 2008 9:10 AMThanks yet again to Hussein.
I am a little worried that I couldnt find that same document.
I entered in ML "The POR SSP HOME function is not available" ....and that document did not appear.
Then I entered it with underscores : "The POR_SSP_HOME function is not available" ... and now I can see the doc.
How did you do your search?! I am guessing you used udnerscores or else something different? ? ?
Thanks, and still curious,
DA
By the way we are told to "clear" the _pages directory. I would do this with
cat /dev/null > oa_html , etc ?
Edited by: Dan A on Dec 16, 2008 9:44 AM -
Login page not coming up after applying patch 12374730
Hi ,
Login page is not coming up after applying patch 12374730.
OS : Solaris 10
Application release 12.1.3
Thanks,Did you apply the patch successfully with no errors?
Yes
Do you have any invalid objects in the database?
NO
Did AutoConfig complete successfully?
Yes
Please check Apache log files for details about the error.
Thanks,
Hussein -
After applying patch 3.0.9.8.1, get an invalid package.
Upon trying to compile the package WWSBR_IMT_SERVICES the following error
occurs
SQL> show err
Errors for PACKAGE BODY WWSBR_IMT_SERVICES:
291/7 PL/SQL: Statement ignored
291/20 PLS-00201: identifier 'CTX_DOC.PKENCODE' must be declared
293/8 PL/SQL: Statement ignored
293/21 PLS-00201: identifier 'CTX_DOC.PKENDCODE' must be declare
We have NOT installed oracle intermedia... why is this error occuring?According to BUG 2120388 this is ok!
-
Need Urgent Help: Solaris fails to come up after applying patch 120012-14
Hello All,
I really need urgent help , as I am in really big problem. Today I applied patches , the last patch I applied was 120012-14.
After this I rebooted Solaris and it is not coming up now. It is giving me following error, it reboots again and again
nel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_register'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_add'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_find_by_stackid'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_add'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_rele'
WARNING: mod_load: cannot load module 'neti'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: ip: unable to resolve dependency, module 'misc/hook' not found
strplumb: can't install module drv/ip, err -1
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'cons_tem_disable'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_inverses'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'consmode'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_hide_cursor'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_pos'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_term_font_size'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_size'
WARNING: mod_load: cannot load module 'consconfig_dacf'
/kernel/misc/sparcv9/consconfig: undefined symbol 'dynamic_console_config'
WARNING: mod_load: cannot load module 'consconfig'
WARNING: consconfig: unable to resolve dependency, module 'dacf/consconfig_dacf' not found
panic[cpu3]/thread=180e000: mod_hold_stub: Couldn't load stub module misc/consconfig
000000000180b890 genunix:mod_hold_stub+1f0 (0, 185fc00, 18acbf8, 60002cff370, 1817328, 0)
%l0-3: 0000000001843b18 0000060003308000 0000000001811ce8 0000000000000000
%l4-7: 0000000000000000 0000000000000064 ffffffffffffffff 0000000000000000
000000000180b940 unix:stubs_common_code+30 (1f037ce7fb0, e164, 64000000, 0, 1ef800, 0)
%l0-3: 000000000180b209 000000000180b2e1 000000337e000000 0000000000000001
%l4-7: 0000000000000000 0000000001817338 0000000000000000 0000060002ccf6c0
000000000180ba10 genunix:main+134 (18ad050, 18a8c00, 1836500, 1861800, 183b400, 1814000)
%l0-3: 0000000070002000 0000000000000001 0000000000000000 0000000000000002
%l4-7: 00000000018b0280 00000000018b0000 00000000018ad060 00000000018ad000
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Please help me what should I do. I have gone through all forums and mailing lists but couldnt find pin point solution.
Thanks,
Farhan
Edited by: rozzx on Jul 5, 2008 1:48 AMSolve this. Patch just screwed the meta devices, changed vfstab in single user mod and it booted fine.
-
Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2
hi everyone.
here is the problem
we recently applied patch 5 for CM on EP 6.0 SP2
the portal platform is at patch 27.
after having applied the patch the logs indicated that the upgrade sequence completed successfully.
however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
under system admin when we go into Content Management Configuration it says invalid Repository Managers.
i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
can somebody help?
thanksHi,
I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
Hope this helps
Cheers,
Jochen -
Icons for the Reports missing in Workspace after applying patches
Hello Gurus,
I have installed 11.1.2.2 on one of my VM's and then applied the 11.1.2.2.300 patch on it.
I have followed the Read Me for all the patches before applying them.
After applying the patches however the icons for the Reports in workspace
[IMAGE ON THE FOLLOWING LINK]
http://i45.tinypic.com/29f6mc0.png
I have reconfigured web server at the end but that did not help. Any help will be highly appreciated.
Thanks
HyperionEPM.Hello Nick,
Yes all the components show green and I can access the reports without any issues. Its just the icon that does not show up.
I will check the logs you have mentioned to see if there are any exceptions in them.
But the issues started up after applying the patches for 11.1.2.2.
I have checked the location path mentioned in Weblogic.xml in raframework.war file and the path points to the correct folder location where the folders mt and mt_thumbnails are located.
Is the any other way out?
Should I delete the contents inside the tmp folder located in RAFramework0
or
Can reconfigurin Reporting and Analysis framework services help in resolving the issue?
Please let me know.
Thanks.
hyperionEPM -
Dump error after applying patches
Dear all;
after applying SAP_BASIS Packs (SAPKB62019 and SAPKB62020) the transaction was canceled before finched implementing the patches and We are receiving ABAP dump errors while executing any transaction ( syntax_error)
could you help me to resolve this proble?
thanks and regards.
Issam CHIBOUNIHi
SAPKB62020
Symptom: After you import Basis Support Package SAPKB62020, you may experience a change in the system response at different points in an R/3 Enterprise system. This problem can be seen in the sudden appearance of screen elements, for example, or in changes in the process flow of transactions. In extreme cases, it can also cause data corruption.
Reason: Support Package SAPKB62020 included an incomplete correction to BAdI processing that caused the execution of BAdI implementation of deactivated Enterprise Extensions.
Solution: You must refer to SAP Note 601742. Import Basis Support Package SAPKB62023 as soon as possible (planned release date is May 06, 2003) or implement the additional correction instructions as described in Note 601742.
thanks and regard
Khurshid -
Java Exception after applying Patch 10.1.0.3
After applying the 10.1.0.3 patch to an XP system, I am getting the following error:
sys@MYDB>exec dbms_java.grant_permission( 'SCOTT', 'SYS:java.io.FilePermission','C:\tmp\*','read,write,delete');
BEGIN dbms_java.grant_permission( 'SCOTT', 'SYS:java.io.FilePermission','C:\tmp\*','read,write,delete'); END;
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.Error: Updater error on insert
ORA-06512: at "SYS.DBMS_JAVA", line 313
ORA-06512: at line 1
Anyone got any ideasI forgot to mention that I did flush the JAR cache to make sure the new JAR's would be downloaded.
Gerrit -
Regarding running catcpu.sql after applying patch
Hi all,
database version: 11.2.0.2 (single instance)
Os: Windows 32-bit
I have applied a bug patch in oracle home 11.2.0.2, but as per the document i didn't run the catcpu.sql after applying the patch in my database.
After 1 month today i run the catcpu.sql in the database (Dev database), it gives the following sys objects invalid: (after running utlrp.sql also this persist)
DBMS_SCHEDULER
DBMS_ISCHED
DBMS_ISCHED_CHAIN_CONDITION
SCHEDULER$_JOB_EVENT_HANDLER
could anyone please help me.
Thanks in advanceuser12133150 wrote:
Hi all,
database version: 11.2.0.2 (single instance)
Os: Windows 32-bit
Pl identify exact OS version
>
I have applied a bug patch in oracle home 11.2.0.2, but as per the document i didn't run the catcpu.sql after applying the patch in my database.
Pl identify the patch number
After 1 month today i run the catcpu.sql in the database (Dev database), it gives the following sys objects invalid: (after running utlrp.sql also this persist)
DBMS_SCHEDULER
DBMS_ISCHED
DBMS_ISCHED_CHAIN_CONDITION
SCHEDULER$_JOB_EVENT_HANDLER
could anyone please help me.
Thanks in advancePl identify why you ran catcpu.sql after 1 month.
Pl compile these objects manually and post the compilation error here
HTH
Srini -
Avoiding a full reinstall of Acrobat 9/X after applying patches
After applying a patch, we redeploy the GP and our users get a full reinstall of Acrobat which takes a longer amount of time than if only the smaller patch were being applied. Is there a way around this so every time we patch and redeploy Acrobat (even the smallest patch), our users don’t have to wait through an entire reinstall?
ThanksHow do I stop an installation process?
you can stop any running process (including an adobe installation) using your activity monitor.
How can I get Acrobat X Pro reinstalled on my computer?
i don't see any reported problem here, http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html
but you can check other user's experiences here, http://roaringapps.com/apps:table
and you can check how someone else solved the same problem (with a different version), Re: Acrobat XI Pro wont install on Mavericks Mac
Maybe you are looking for
-
Is there a good basic mastering program out there? Is it PEAK?
I'm just doing demos...but I want them to sound decent... just the basic volume levels... setting up the tracks and the spaces between the tracks... What are my choices?
-
Print with Preview: Screen option
Might be a bit obscure but this is a question about the screen option in print with preview. For the purposes of photoetching (transferring a half tone positive image onto a metal plate through the use of photosensitve film for the purposes of fine a
-
I don't understand why I can't change password lik...
Extremely mad. NO IDEA WHY I CAN'T CHANGE PASSWORD LIKE "lajiskype" or "horribleskype."
-
Reverting to 1.0, controlling aspect ratio, coping with choices
'm relatively content now that I've downgraded to 1.0. Streaming is back to what Apple TV should be, and I don't really miss rentals (thanks, Netflix) or any of the other new Take 2 features much at all. One problem, though. The movies I'm encoding w
-
Monitor flickering requires power unplug/rep​lug
I'm using an HP w2558hc monitor on a T60 running Windows XP Professional with an ATI Mobility Radeon X1400 display adapter. Everytime I reboot the laptop there's a rapid left/right jiggling of the display, which is noticeable enough but more so when