ReBoot after Hard Drive Change Pavilion DV7 Problems

HP Pavilion DV7 LapTop Windows 7 Old Drive had massive problems and was slow as... molasses. We made a recovery disc and then installed the new drive. The computer boots, but it asks for imagery and we don't know what its asking for. so we cancel out and it goes to a screen that asks us what drivers we want to install. once again we don't know what drivers to install. cancel out goes to another screen, offering choices for 1)Startup Repair (which won't work, runs for every does nothing) 2)System Restore (won't work) 3)System Image Recovery (won't work) 4) Windows Memory Diagnostic( ? ) 5) Command Prompt ( ? ) 6) Recovery Manager (?) So can someone help? Want to have the laptop boot up and load OS.

Since you have the install disk you want to make sure you boot from the disk. I believe its F9 to enter boot options on DV7 and select the dvd drive to boot from. There disk should then run automagically and install windows 7.

Similar Messages

Random restarts after hard drive change!!

Hi guys, I have a Late 2009 15" MacBook Pro (Unibody) A1286 that recently had a hard drive change due to the stock one coming close to failure. After a couple hours of usage, It suddenly freezes (and if i'm playing audio, it sounds like a broken record for a second) and restarts and gets the "Your computer restarted because of a problem" message. When the desktop loads, It requests to send a report to apple and provides this message:
Anonymous UUID: 9CA89A41-B525-1850-2916-3E5637C22C3B
Fri Nov 28 18:27:04 2014
panic(cpu 0 caller 0xffffff8006edc43e): Kernel trap at 0xffffff80071c8881, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x00000000a2039000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x00000000091f0000, RDX: 0xffffff8020d7a810
RSP: 0xffffff80c227bf50, RBP: 0xffffff80c227bf70, RSI: 0x0000000000000050, RDI: 0xffffff8020d7a810
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80c227be70, R11: 0xffffff80152a6080
R12: 0x0000000000000001, R13: 0xffffff80210257f8, R14: 0x0000000000000000, R15: 0xffffff8021025840
RFL: 0x0000000000010286, RIP: 0xffffff80071c8881, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80c227bbe0 : 0xffffff8006e22f79
0xffffff80c227bc60 : 0xffffff8006edc43e
0xffffff80c227be30 : 0xffffff8006ef3976
0xffffff80c227be50 : 0xffffff80071c8881
0xffffff80c227bf70 : 0xffffff80071c6df8
0xffffff80c227bfb0 : 0xffffff8006ed7607
BSD process name corresponding to current thread: java
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x0000000006c00000
Kernel text base: 0xffffff8006e00000
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 25628519916839
last loaded kext at 322876459037: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f89188000, size 65536)
last unloaded kext at 512411113713: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f89188000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.34
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleLPC 1.7.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000LPVX-22V0TT0, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:
It was a brand-new hard drive, so there shouldn't be any issues!!! Any help or ideas ? The person I got the HD from suggested it's another issue such as the power adapter or motherboard, but It started after the swap.

Back up all data, then remove the Norton/Symantec product by following the instructions on either of these pages:
Uninstalling your Norton product for Mac
Removing Symantec programs for Macintosh
If you have a different version of the product, the procedure may be different.

My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

So i purchased a mid 2009 Macbook Pro from a guy with 4 gb of ram and 250gb hard drive. It worked perfectly fine when i booted it with his hard drive and ram installed.
I spilled beer in my old computer (late 2009 15" 500gb hard drive and 8gb ram) but took the hard drive to get tested and it worked fine. i later found out it was from a 2010.
Like an idiot i assumed the pro i just purchased would be able to handle the same upgrades that were in my old computer so i threw in the 500gb hard drive (2010) and the 8gb of ram.
The thing booted up fine, just a bit slow which i chalked up to my hard drive sitting unplugged for a long time.
After about 3 minutes it crashed on me. Confused i replaced the 4gb of original ram back into it. (the 8gb ram was pny i bought from ebay so i thought it could be that) It decided not to turn on or show any lights on the front except for the battery meter.
After this i replaced the original hard drive and still NO LUCK!! im really mad because i am in desperate need of the information on my original 500gb hard drive and im afraid i have destroyed 2 computers and about $1K worth of cash out the window.
HELP please enlighten me on what i have done and if the situation can be fixed.

UPDATE: Problem solved with the old hard drive in it, Now the less pressing issue:
Will the computer run my 500gb hard drive with all my information on it? I need to forward a resume and it is on that hard drive.

Can't reinstall software after hard drive change

My old hard drive failed on me last week, so I had to buy a new one. I want to reinstall my adobe suite CS5.5, but the computer just spits the disk out after a few minuets. What am I doing wrong?
I have a mac book pro, mid 2009, with Snow leopard OSX 10.6.8

You can bypass the discs and download the trial version from the page linked below. Then use your serial number to activate the software to full use.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
If this works, then there may be a problem with the setup of your disc drive.

Help after hard drive change - some songs not available

I had an external hard drive that started to act wonky and wouldn't mount. I was able to get to mount one last time and transfer the contents over to a new hard drive. Now every time I start iTunes there is a message about checking for gapless playback. I believe there are 82 tracks. It goes by rather fast so it is hard to read each and every title. The ones I have read upon checking I find that the songs have no content. They just don't exist. When you go to control I instead of the track showing the length it shows Not Available. Is there anyway to search my hard drive to find out which tracks are having a problem?

Go to the Dougscripts web site and get the script called ListMIAs

White screen after hard drive change and installing 10.6

imac stuck on white screen at start up, changed the hard drive and reinstalled 10.6 its an older mac and can't handle any newer software. tried every thing i know.

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

How do I reinstall after hard drive change?

Been running Lion since its release and now it will not boot up. My hard drive is one year old and Lion, thru Disk Utility, is saying that my hard drive is bad. I'm going to change my hard drive but am wondering how do I get Lion back on the new hard drive that I'm installing.

Here are Apples directions: http://www.apple.com/macosx/recovery/. Scroll down to" Internet Recovery. Help is everywhere."

Recovery after hard drive replacement-pavilion g7

hard drive died on a g7-1219wm notebook. replaced with intel SSD. tried to use recovery discs (made from this pc) to get back to original state. recovery says the discs weren't made with this computer and recovery can not continue.
any ideas or clues?

Hi:
The only thing I can think of that you can do is this...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to DVD's for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

New hard drive and photoshop license problem

I have a Dell Inspiron 6000 with a 1.5 Ghz Pentium processor, 2 GB of RAM, and Win Xp/Pro SP3.
The hard drive in this computer failed, and it has been replaced. I used an image backup from Acronis True Image 10 to "restore" the new disk.
Now, when I try to open Phostoshop CS2, I receive a message that the license is no longer valid (I have been using this version of Photoshop for a long time).
I don't have this problem with InDesign CS3 (v. 5.0.2), FrameMaker 7.2b144, or Acrobat 8.1.6.
I didn't find any helpful info on the "Product Activation" web page.
I tried a forum search and a search of Adobe.com using the search criteria "new hard drive and photoshop license problem."
The only relevant item I could find is this:
"Backup and restoration of your system using standard tools do not require reactivation. While reactivation after backing up or restoring the system was required in early versions of Adobe software (such as Adobe Photoshop® CS), Adobe has continued to improve the activation process with new technology that eliminates the need to reactivate after system restoration. In complex situations where the system is being upgraded, we recommend deactivating the Adobe software before commencing the system upgrade. Once the system upgrade is completed, the subsequent install/restore will require reactivation, which is typically accomplished without difficulty and is completely transparent to the user."
So does that mean I have to "reactivate" Photoshop CS2? If so, do I use the Activation window that is displayed when I open Photoshop? The serial number has 20 characters. Will the Adobe (re)activation recognize this old serial number? If not, what do I have to do to get this product usable again?
Please help.

>replaced your hard drive and CS2 DRM is looking for the old hard drive number and not finding it
Interesting... I use http://www.terabyteunlimited.com/image-for-linux.htm which creates a bootable CD and runs outside of Windoze
I have made image files and loaded those files to a new hard drive (I use drive swap hardware to make a backup and create a new drive every time I install or uninstall major software) and have never had any program complain about needing activation
But, since the program I use is Linux on a bootable CD, it copies EVERYTHING on a hard drive, even the hidden registration areas as far as I can tell, so when I do a restore to a new drive, everything is put on the new drive

Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?

Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?
This question was solved.
View Solution.

Gurra wrote:
Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?
Hi,
The right part number for the hard drive kit is 681976-001. The support website for the laptop is on HP Sweden so run the part number on google.co.uk (or your Swedish). I have found the cheapest on us amazon for $38 or £42.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

Apple recommends separate partitions: http://support.apple.com/kb/HT4722

How do I unactivate after hard drive crash?

Just purchased an upgrade to CS6 Photoshop from CS3 Photoshop but hard drive crashed before I could uninstall it. How do I deactivate after hard drive crash? Do I need to or can I just load my full CS3 copy and then upgrade it to my new CS6?

You can just install CS6 directly. You will be prompted to enter your qualifying serial number from CS3 during the install process.

The name and the root of the hard drive change, how can i reset it?

the name and the root of the hard drive change, how can i reset it?

That sort of thing doesn't happen automatically,. Someone had to change it. Just rename it anything you like. Right click on it and select Get Info then in the Name and Extension are name what you like.

HT1923 what hard drive changes are made when downloading i-tunes 10.6 upgrade

what hard drive changes are made to my computer when downloading the i-Tunes 10.6 upgrade / update?
what registry changes does it make, if any?

Ok, so as far as the hard drive goes, go for the biggeset one you can afford/need. 500 gb, should be plenty big for just about anybody. But as for the speed of the drive.... Yes, a 7200 rpm drive will drain the battery life much quicker than a 4200 rpm drive or even a 5400 rpm drive. Apple has been shipping 4200 rpm drives as a standard for ever practically, and recently made the 5400 rpm the new standard with the 7200 as an option. More important than the physical speed is the buffer size. A nice big buffer will provide quicker access to data and not eat into your battery life. Then there is also the option of an SSD (solid state drive), but those are still crazy expensive.
I've read any Serial ATA drive is compatible with the drop sensor. I upgraded my hard drive with a Seagate, and it works great. Apple generally ships Toshiba drives in their laptops.
replacing a hard drive can be a bit of work. First of all it will void your warranty (But your is obviously expired anyways) It is pretty complicated and takes a lot of patience. iFixit has great step by step instructions. here's a link : http://www.ifixit.com/Device/MacBookPro_15%22_Core_2_Duo_Models_A1226_andA1260
Hope this helps

Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year. Question 1: Problem = hard drive? Question 2: Problem = PRAM battery? the What

Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year.
Question 1: Problem = hard drive?
Question 2: Problem = PRAM battery?
the
What can I do to boot?

Restart with the Option key held down.
If the internal drive shows up, it's the PRAM battery.
If it doesn't, insert a compatible Mac OS 9 or X install disk, click the button with the circular arrow, and either repair the internal drive or install a new OS on it. If it doesn't show up in Disk First Aid(9) or the Disk Utility(X), it's either not plugged in or needs to be replaced.
(97530)

ReBoot after Hard Drive Change Pavilion DV7 Problems

Similar Messages

Maybe you are looking for