Reboot after panic

Hi,
my imac reboot after a panic. I changed the HD with apple care and they removed defected memory card but i still have the same problem.
here is the last dump
Any help wil be appreciated
Eric.
Anonymous UUID: E665EA28-80CB-0D8B-DD0C-6CF961F20D8D
Sun Apr 13 12:11:20 2014
panic(cpu 0 caller 0xffffff8004f640a5): "hfs_swap_HFSPlusBTInternalNode: catalog key #24 invalid length (1060)\n"@/SourceCache/xnu/xnu-2422.90.20/bsd/hfs/hfs_endian.c:526
Backtrace (CPU 0), Frame : Return Address
0xffffff81282d3380 : 0xffffff8004c22fa9
0xffffff81282d3400 : 0xffffff8004f640a5
0xffffff81282d3440 : 0xffffff8004f6303f
0xffffff81282d3490 : 0xffffff8004f57a31
0xffffff81282d34d0 : 0xffffff8004e06e6e
0xffffff81282d35c0 : 0xffffff8004e03b17
0xffffff81282d3660 : 0xffffff8004e064ee
0xffffff81282d36b0 : 0xffffff8004f826ff
0xffffff81282d36e0 : 0xffffff8004f8697a
0xffffff81282d3750 : 0xffffff8004f6d1a6
0xffffff81282d37e0 : 0xffffff8004dfdc90
0xffffff81282d3860 : 0xffffff8004fbdfe6
0xffffff81282d3f50 : 0xffffff800503e363
0xffffff81282d3fb0 : 0xffffff8004cf3b26
BSD process name corresponding to current thread: PluginProcess
Mac OS version:
13C64
K
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 10 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3500418AS, 500,11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Photosmart C4600 series
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: My Book 1140
USB Device: IR Receiver
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

There's a 90-day warranty on the repair. The panic may have been caused by bad memory, not the hard drive.

Similar Messages

Macbook Pro Retina 15" mid 2013 reboots after panic.

Just bought a mid 2013 Macbook Pro Retina last week. Haven't had any problems with it until today when I came back to my computer and there was a grey screen stating there had been a problem and the computer needed to be restarted. Below are the two system diagnostic reports.Is this a bug or a problem with the logic board/graphic switching?
Interval Since Last Panic Report: 207146 sec
Panics Since Last Report:          1
Anonymous UUID:                    0B9917C7-9BA8-2D6B-7925-639D4B83F220
Thu Aug 22 18:03:07 2013
panic(cpu 6 caller 0xffffff80094b8655): Kernel trap at 0xffffff7f89d33d5e, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000040, CR3: 0x000000000bf72000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0x0000000000000001, RCX: 0x0000000000000000, RDX: 0x0000000000002400
RSP: 0xffffff81315b39b0, RBP: 0xffffff81315b3a50, RSI: 0x0000000000000000, RDI: 0xffffff80dce46000
R8: 0xffffff7f89f32e3c, R9: 0xffffff81315b3434, R10: 0xffffffffffffffff, R11: 0xffffff8009a7def8
R12: 0x0000000000000000, R13: 0xffffff81315b3cf8, R14: 0xffffff80dce46000, R15: 0x00000000ffffff00
RFL: 0x0000000000010282, RIP: 0xffffff7f89d33d5e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000040, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff81315b3650 : 0xffffff800941d626
0xffffff81315b36c0 : 0xffffff80094b8655
0xffffff81315b3890 : 0xffffff80094ce17d
0xffffff81315b38b0 : 0xffffff7f89d33d5e
0xffffff81315b3a50 : 0xffffff7f89d27ceb
0xffffff81315b3be0 : 0xffffff7f89b1b970
0xffffff81315b3c60 : 0xffffff7f89b0757b
0xffffff81315b3cd0 : 0xffffff7f89b0a1b8
0xffffff81315b3d40 : 0xffffff7f89b0a343
0xffffff81315b3db0 : 0xffffff7f89b09db4
0xffffff81315b3e10 : 0xffffff7f89ad0c78
0xffffff81315b3e50 : 0xffffff7f89acff63
0xffffff81315b3e80 : 0xffffff7f89acf31e
0xffffff81315b3ef0 : 0xffffff8009848588
0xffffff81315b3f30 : 0xffffff800984708a
0xffffff81315b3f80 : 0xffffff80098471b9
0xffffff81315b3fb0 : 0xffffff80094b3137
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f89ac2000->0xffffff7f89af9fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89a83000
         com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f89b05000->0xffffff7f89b16fff
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f89ac2000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89a83000
         com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f89b 19000->0xffffff7f89dbefff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89a83000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f89b05000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f89ac2000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x0000000009200000
Kernel text base: 0xffffff8009400000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 12513755129567
last loaded kext at 7262816174660: com.apple.iokit.SCSITaskUserClient          3.5.5 (addr 0xffffff7f8b8b2000, size 36864)
last unloaded kext at 7346909811130: com.apple.driver.AppleUSBCDC          4.1.23 (addr 0xffffff7f8b8af000, size 12288)
loaded kexts:
com.Logitech.Control Center.HID Driver          3.7.0
com.apple.filesystems.smbfs          1.8.4
com.apple.filesystems.msdosfs          1.8.1
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.AGPM          100.12.87
com.apple.driver.X86PlatformShim          1.0.0
com.apple.filesystems.ntfs          3.10
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.driver.AppleIntelHD4000Graphics          8.1.2
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
com.apple.driver.AppleMuxControl          3.4.5
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.GeForce          8.1.2
com.apple.driver.AppleIntelFramebufferCapri          8.1.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.4.5
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleSDXC          1.4.2
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AirPort.Brcm4331          615.20.17
com.apple.driver.AppleAHCIPort          2.5.2
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBXHCI          5.6.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2.1
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOAcceleratorFamily          74.5.1
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.nvidia.gk100hal          8.1.2
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.NVDAResman          8.1.2
com.apple.iokit.IOSurface          86.0.4
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleGraphicsControl          3.4.5
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.driver.IOBluetoothHIDDriver          4.1.4f2
com.apple.iokit.IOBluetoothFamily          4.1.4f2
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.AppleThunderboltNHI          1.7.8
com.apple.iokit.IOThunderboltFamily          2.4.0
com.apple.iokit.IO80211Family          530.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOUSBFamily          5.6.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
System Profile:
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f35
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.4f2 12041, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x1a120000 / 4
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc517, 0x1a124000 / 7
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0901, 0x1a123000 / 6
USB Device: psc 1310 series, 0x03f0 (Hewlett Packard), 0x3f11, 0x1a122000 / 5
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 4
Thu Aug 22 18:46:01 2013
panic(cpu 0 caller 0xffffff800f6b8655): Kernel trap at 0xffffff7f8ff33d5e, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000040, CR3: 0x0000000012171000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0x0000000000000001, RCX: 0x0000000000000000, RDX: 0x0000000000002400
RSP: 0xffffff80f967b9b0, RBP: 0xffffff80f967ba50, RSI: 0x0000000000000000, RDI: 0xffffff80e310b000
R8: 0xffffff7f90132e3c, R9: 0xffffff80f967b434, R10: 0xffffffffffffffff, R11: 0xffffff800fc7def8
R12: 0x0000000000000000, R13: 0xffffff80f967bcf8, R14: 0xffffff80e310b000, R15: 0x00000000ffffff00
RFL: 0x0000000000010282, RIP: 0xffffff7f8ff33d5e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000040, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f967b650 : 0xffffff800f61d626
0xffffff80f967b6c0 : 0xffffff800f6b8655
0xffffff80f967b890 : 0xffffff800f6ce17d
0xffffff80f967b8b0 : 0xffffff7f8ff33d5e
0xffffff80f967ba50 : 0xffffff7f8ff27ceb
0xffffff80f967bbe0 : 0xffffff7f8fd1b970
0xffffff80f967bc60 : 0xffffff7f8fd0757b
0xffffff80f967bcd0 : 0xffffff7f8fd0a1b8
0xffffff80f967bd40 : 0xffffff7f8fd0a343
0xffffff80f967bdb0 : 0xffffff7f8fd09db4
0xffffff80f967be10 : 0xffffff7f8fcd0c78
0xffffff80f967be50 : 0xffffff7f8fccff63
0xffffff80f967be80 : 0xffffff7f8fccf31e
0xffffff80f967bef0 : 0xffffff800fa48588
0xffffff80f967bf30 : 0xffffff800fa4708a
0xffffff80f967bf80 : 0xffffff800fa471b9
0xffffff80f967bfb0 : 0xffffff800f6b3137
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8fcc2000->0xffffff7f8fcf9fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8fc83000
         com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f8fd05000->0xffffff7f8fd16fff
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8fcc2000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8fc83000
         com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f8fd 19000->0xffffff7f8ffbefff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8fc83000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f8fd05000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f8fcc2000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x000000000f400000
Kernel text base: 0xffffff800f600000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 2288333153470
last loaded kext at 240740871258: com.apple.filesystems.smbfs          1.8.4 (addr 0xffffff7f91a68000, size 229376)
last unloaded kext at 133709132625: com.apple.iokit.IOEthernetAVBController          1.0.2b1 (addr 0xffffff7f9097c000, size 28672)
loaded kexts:
com.Logitech.Control Center.HID Driver          3.7.0
com.apple.filesystems.smbfs          1.8.4
com.apple.filesystems.msdosfs          1.8.1
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.1.4f2
com.apple.driver.AGPM          100.12.87
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.filesystems.ntfs          3.10
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.GeForce          8.1.2
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.4f2
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleMuxControl          3.4.5
com.apple.driver.AppleIntelHD4000Graphics          8.1.2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.4.5
com.apple.driver.AppleIntelFramebufferCapri          8.1.2
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleSDXC          1.4.2
com.apple.driver.AirPort.Brcm4331          615.20.17
com.apple.driver.AppleAHCIPort          2.5.2
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBXHCI          5.6.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2.1
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.nvidia.gk100hal          8.1.2
com.apple.NVDAResman          8.1.2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.4f2
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IOAcceleratorFamily          74.5.1
com.apple.iokit.IOSurface          86.0.4
com.apple.driver.AppleGraphicsControl          3.4.5
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.driver.IOBluetoothHIDDriver          4.1.4f2
com.apple.iokit.IOBluetoothFamily          4.1.4f2
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.AppleThunderboltNHI          1.7.8
com.apple.iokit.IOThunderboltFamily          2.4.0
com.apple.iokit.IO80211Family          530.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOUSBFamily          5.6.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

That kind of panic can be caused by an adapter for an external display that isn't connected to anything. See this thread.
There are also reports that the panic may be triggered by waking an external display from sleep. To test that theory, open the Energy Saver preference pane and click the lock icon to unlock the settings, if necessary. Move the Display sleep slider all the way to the Never position on the right. See whether there's any change.

Can I set up a way to automatic reboot after a kernal panic?

Hey,
I'm working with Mac OS X Server (10.4.9) that is on a 4x2.5 GHz PowerPC G5. I been looking for a way to set up my server to automatically reboot after a kernel panic. Can any one show me the way?
Thanks
Mike

We use to use a 'spare' server for testing but could be pushed into production. For when IBM needed to come in and replace a faulty card.
Get on-site contract, and order an Xserve and use the old G5 Quad workhorse as spare... but you said this is not your usual company, so maybe that don't see things like an IT might.
Swap out RAM for one. Install ECC which Quad can use. And those FAQ lists make a good spreadsheet of what happens.
You might just start with Apple Hardware Test and a memory test.
Warmer weather, I assume it is in climate controlled room?
Have you read up on http://www.xlr8yourmac.com reports on Quad owners and liquid cooling? I know some that went through three motherboards (on-site swap) and a few that walked away with Mac Pro because it was determined the patient reached the point of not being able to be revived.

Looking for a Reboot Tool that initiate a reboot after a kernel Panics?

Hello
Is their a program around that can be installed on OS X that initiate a reboot after a kernel panics occured? Or is it possible change the parameter of the firmware to reboot after a kernel panics. Some Tools like TinkerTool are able to change to sleep mode of the mac, maybe another tool is able to change the reboot mode
Regard
Gérard

Use a dongle such as this one. Implementation of it in software alone requires Mac OS X Server.
(40598)

My iPod 4 (2010) randomly reboots after 5.1.1 upgade to iOS6 (WDT timeout).

My iPod 4 (2010) randomly reboots after 5.1.1 upgrade to iOS6 (WDT timeout).
After reboot I cannot power it with Power Button. Have to do Power + Mac, hold to 10 sec and than it will go ON. After 1 minute when it will go to sleep it will start randomly reboots.
Diagnostics & Usage Data log is shoving multiple "panic" error with Debug message "WDT timeout".
Any Advice what is wrong? With 5.1.1 it was running like charm.
Very disappointing.

Try the following:
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Were any reboot after sleep problems NOT fixed by the EFI firmware update?

The subject says it all. I wanted to get a read on whether this EFI update really did solve the reboot after sleep problem for all 2008 Mac Pros. If have an early '08 Pro that had the problem before the update and it didn't go away after the update (and it's not due to some other problem like kernel panics, etc.), then please post details in this thread. thanks!

We have 4 total systems (all had the issue, all slightly different configurations) and the reboot-on-wake issue has disappeared on all 4 of them.
Looks like a definitive fix to me.

Two issues: iMac randomly reboots after watching Netflix, and left fan randomly turns on

Two issues: iMac goes into kernel panic and reboots after watching Netflix in HD, and left cooling fan randomly starts. Is this RAM or logic board?
Specs:
Model Name:          iMac
Model Identifier:          iMac12,2
Processor Name:          Intel Core i5
Processor Speed:          3.1 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          20 GB
Boot ROM Version:          IM121.0047.B1F
SMC Version (system):          1.72f2
The fan issue has been there for a while, but the kernel panics, AKA crash and reboots started after I got new Crucial RAM for the 2nd time (returned and replaced the two 8GB sticks, because the crashes were worse). Are the chances that I got 2nd batch of RAM likely, or is there logic board issue here?

You should post the most recent panic report. http://support.apple.com/kb/TS3742

IPhone 6Plus on every reboot after putting in my password it opens to a small window asking for apple id password

everything works on phone and wow it's big compared to my iPhone 5s. went with space grey since i have had 3 white phones in a row. restored via iCloud backup. updated iTunes as i have about 3,000 songs. 250 bought the rest ripped to AAC from my cc's....what a pain but switched from my windows desktop to this new rMBP late 2013 for xmas and iTunes is slightly different on a mac than windows and where everything is stored on drive.
anyhow problem is every time i reboot after putting in my password and arriving at whatever page i left at i get a very small window asking for my Apple id password. Now the top half is pre filled in with the email address i use for iCloud/itunes/apple/etc.
i did see in settings there is a checkmark i cannot remove that says for apple password "ask immediately" there are no other choices. it can't be unchecked by any method i found.
any help appreciated.

In case anyone else gets this I hit cancel once and it has never come back.

Fix for continuous reboot after installing Service Pack 3 in Windows XP

After contacting HP Technical Support and speaking to a supervisor we were able to solve the problem of Windows continuously rebooting after installing SP3. Here are the steps that fixed the problem with my HP Pavilion running on an AMD processor. The steps are actually fairly straight forward and easy....
Issue: The computer reboots continuously after installing Windows XP service pack 3
Computer reboots continuously after installing Windows XP service pack 3 on AMD systems. The problem is that with some configurations, SP3 causes the computer to crash during boot, and Windows XP, by default, is set up to automatically reboot when it crashes. That is why you end up in the endless rebooting scenario.
Cause:
On HP computers, the same Windows installation disc image for Intel processor based PC's is deployed for the AMD processor based computers as well. Because the original installation image for both Intel and AMD is the same, all have the intelppm.sys driver installed and running. That driver provides power management on Intel-based computers. On an AMD-based computer, amdk8.sys provides the same functionality for power management.
Symptoms:
Ordinarily, having intelppm.sys running on an AMD-based computer appears to cause no problems. However, on the first reboot after a Service Pack 3 installation, it causes a big problem. The computer either fails to boot, or crashes with a STOP error code of 0x0000007e.
You may not see the error code because the computer reboots too fast. In order to get the error message, you need to set an option during startup. To do so, open the windows advanced menu by tapping the f8 key on startup. Then select the "Disable automatic restart on system failure" option.
Solution:
If you have an AMD-based computer, however, you do not need the intelppm.sys driver and can disable it. There are three methods in order to do this.
Step 1: Please try to log on the system in safe mode.
1. While using Safe mode open the command prompt.... Start, All Programs, Accessories, Command Prompt
Run the following command in the command prompt just like it's typed: sc config intelppm start= disabled
Step 2:
If the issue persists, please try to log on or boot the system in recovery console (refer to the web document)
2. Using recovery console:
If you booted into the recovery console, from a command prompt, type: disable intelppm
Step 3: Please check in registry.
3. Using windows registry:
1. Run regedit
2. Click on HKEY_LOCAL_MACHINE
3. From the File menu, select "Load hive"
4. Navigate to %systemdriver%\Windows\System32\Config on the dead system and select the file name System
5. Name it something you can remember, such as "horked"
6. Navigate to horked\ControlSet001\Services\IntelPPM
7. Double click the Start value and set it to 4
8. If you did what I did and completely messed things up by running a disk check previously, navigate to ControlSet001\Control\SessionManager. Open the BootExecute value and clear out the autochk entries.
9. Repeat steps 6-8 for the other control sets.
10. Reboot
Reference:
http://support.microsoft.com/kb/888372
Additional information:
Computer Restarts after Displaying Stop Error 0x0000007E (After Updating with Service Pack 3 for Windows XP):
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01457284&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
For future reference: Service pack 3 Installation steps:
Before installing the service pack 3 update, please follow the steps listed above and save yourself much time and effort.
To uninstall service pack 3, I suggest that you uninstall it from add/remove programs.
Step 1:
Uninstall service pack 3 from add/remove programs:
1. Click Start.
2. Select Run.
3. Type appwiz.cpl in the run field.
4. Click OK.
5. Click change or remove programs.
6. Select the program -service pack 3 that you want to uninstall or remove.
7. Click Remove button.
8. It will pop up the message stating that "Are you sure you want to remove the programs".
9. Click Yes. It will help you to remove or uninstall the installed programs from add and remove programs.
Step 2: If the issue persists, I suggest you to perform system restore and then try to install the service pack 3 after performing the steps mentioned above in regards to removing the intelppm.sys Driver.
Using Microsoft System Restore in Windows Me and XP:
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph07103&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Step 3:
How to obtain the latest Windows XP service pack :
http://support.microsoft.com/kb/322389/
Steps to take before you install Windows XP Service Pack 3:
http://support.microsoft.com/kb/950717/en-us
I hope this helps someone who is having this problem. It sure took me a minute to get it all figured out. :0)

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Slow reboot after 10.2.1.2977 update to Z10

Hello,
The first reboot after updating to software release 10.2.1.2977 (OS 10.2.1.3247) is taking a very long time (just over 22 hours now). The boot screen showed 97% before I went to sleep last night, and has been at 98% since I woke up ~6hrs ago..
I'm a fairly new BB owner, and this is the first OS update I've done besides the one after I first got my z10 - but I'm assuming this isn't normal. Has this happened to anyone else? Does anyone have any idea what's going on, or have suggestions on what I should do?
Any help would be appreciated.
Thanks,
Pat

No, it most definitely does NOT take anyway near that long to reboot; you should expect to wait about one minute usually (except immediately after an OS reload in which case a few minutes is normal).
If it's not completely rebooted yet, remove the battery for a few seconds then put it back in. If it's completely rebooted, you can either leave it for now or you can reset your phone. To do this, press and hold the power button for about 15 seconds until BlackBerry appears on the screen. Don't release the power button until you see BlackBerry, ignoring anything that appears before that.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, it now happens frequently. Any insight?

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, but it keeps happening, now several tomes a day. Any insight as to the issue or a proposed solution?

Unplug any peripherals you have except your keyboard, reboot, and check activity monitor for apps. Keep running apps to a minimum to find the App causing the issue.

KT4V-L rebooting after bios

My system keeps rebooting after the bios screen, before windows loads. ?( ?(
XP2600+ (333 fsb)
PC2100 DDR - 512mb
32mb x2/x4 AGP
I'm NOT overclocking,
Could it be the AGP card, don't know if it's 1.5v or 3.3v?
Could it be memory - perfectly fine in my previous system?
Could it be a power issue - again, fine b4?
Faulty mobo or processor?
PLEASE HELP!!!!
Thanks
Craig

Hi..
Interesting... Could be many resons..
1) VGA - NOT VGA.. If it was 3.3V AGP then u cant plug it into the slot.. And even if u did, it will not initalize
2) Memory - Not likely.. But cannot be compleatly ruled out.. What sort of memory do u have.. Generic???
3)Power - Quite possible.. This new VIA and NVIDA chips eat up power.. Check out the articles written by BAS to c whether u system has enough power
http://www.msi.com.tw/program/service/forum/index.php?threadid=1515&boardid=16&styleid=1&sid=51dff848cbbfeaf7aba02fb2086ac1a0
http://www.msi.com.tw/program/service/forum/index.php?threadid=1135&boardid=16&styleid=1&sid=51dff848cbbfeaf7aba02fb2086ac1a0
4) Faulty Processor/MB - Unlikly, though cannot be ruled out
5) FAULTY COOLING - Highly probable.. Check whether u have installed the cpu cooler properly..
6) Cable Connection - Check the cable connections
Hope this information helps
Regards
Rasika

Re: Need Help! Dell poweredge T630 cannot reboot after trying to add new memory

It fail to initialize the iDRAC

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card

What errors are you seeing on the screen?

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Reboot after panic

Similar Messages

Maybe you are looking for