Reboot failed after smb upgrade(SOLVED)

Forced fsck ran during reboot and reports two files using same inode ...'usr/bin/smbget .../usr/bin/smbtree
What can be done to eliminate this problem?
Last edited by lilsirecho (2009-05-06 06:47:26)

Booted into Faunos Live system.
As root, ran Fsck on the HDD with inode problem.  Answered yes to all system repair queries.
Rebooted into archlinux HDD with no problems.

Similar Messages

  • Filesystem check failed after running upgrades [Solved]

    I have a new arch installation with /home, /tmp, /var, and /usr mounted on an LVM partition. After running the updates I get a "Filesystem Check Failed" error message. It then dumps me into the terminal in read-only mode, giving me the option for read/write... which doesn't matter, because without access to vi (which is on /usr o the LVM partition) I can't access anything anyway. / and /boot test clean, but it's not recognizing the LVM. Any help would be appreciated.
    Last edited by 2handband (2011-01-22 19:21:17)

    Figured it out... the miserable thing couldn't make up it's mind which drive to label sda.

  • [Solved by itself] Loading module aha152x failed after kernel upgrade

    Hi all,
    I have a ten-year old Epson GT5500 scanner plugged onto an ISA card.
    This was quite hard to get it working under linux but it worked well untill yesterday last update.
    I have the following error output when trying to load aha152x module:
    # modprobe aha152x
    FATAL: Error inserting aha152x (/lib/modules/2.6.27-ARCH/kernel/drivers/scsi/aha152x.ko): No such device
    I have the following line in /etc/modules.conf:
    alias scsi_hostadapter aha152x options aha152x aha152x=0x140,9
    How can I get the scanner back to work?
    Thanks.
    Last edited by Jeddo (2008-11-15 11:54:12)

    fwojciec wrote:Did you build the module yourself?  If so you might have to rebuild it for the new kernel version.
    No. The configuration to get the scanner working under linux comes from a how-to and remains valid after kernel upgrades -- until yesterday. It does not need any module building, only loading.

  • "/usr/lib/cups/backend/usb failed" After Kernel Upgrade

    When I upgraded my kernel to 2.6.31.5-1 from  2.6.31.4-1 and tried printing a file, I got this error from cups:
    "/usr/lib/cups/backend/usb failed"
    The printer was working perfectly fine yesterday.
    Upgrade I did today before rebooting my pc to use the new kernel:
    [2009-10-27 09:49] upgraded compositeproto (0.4-2 -> 0.4.1-1)
    [2009-10-27 09:49] upgraded consolekit (0.3.1-1 -> 0.4.1-1)
    [2009-10-27 09:49] upgraded dbus-glib (0.80-1 -> 0.82-1)
    [2009-10-27 09:49] upgraded dmxproto (2.2.99.1-1 -> 2.3-1)
    [2009-10-27 09:49] upgraded fontcacheproto (0.1.2-2 -> 0.1.3-1)
    [2009-10-27 09:49] upgraded pango (1.26.0-1 -> 1.26.0-2)
    [2009-10-27 09:49] upgraded shared-mime-info (0.60-1 -> 0.70-1)
    [2009-10-27 09:49] upgraded gtk2 (2.18.2-1 -> 2.18.3-1)
    [2009-10-27 09:49] upgraded hicolor-icon-theme (0.10-2 -> 0.11-1)
    [2009-10-27 09:49] upgraded kbproto (1.0.3-2 -> 1.0.4-1)
    [2009-10-27 09:49] upgraded module-init-tools (3.10-2 -> 3.11.1-1)
    [2009-10-27 09:50] >>> Updating module dependencies. Please wait ...
    [2009-10-27 09:50] >>> MKINITCPIO SETUP
    [2009-10-27 09:50] >>> ----------------
    [2009-10-27 09:50] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-10-27 09:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-10-27 09:50] >>> More information about mkinitcpio setup can be found here:
    [2009-10-27 09:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-10-27 09:50]
    [2009-10-27 09:50] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-10-27 09:50] ==> Building image "default"
    [2009-10-27 09:50] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-10-27 09:50] :: Begin build
    [2009-10-27 09:50] :: Parsing hook [base]
    [2009-10-27 09:50] :: Parsing hook [udev]
    [2009-10-27 09:50] :: Parsing hook [autodetect]
    [2009-10-27 09:50] :: Parsing hook [pata]
    [2009-10-27 09:50] :: Parsing hook [scsi]
    [2009-10-27 09:50] :: Parsing hook [sata]
    [2009-10-27 09:50] :: Parsing hook [usb]
    [2009-10-27 09:50] :: Parsing hook [pcmcia]
    [2009-10-27 09:50] :: Parsing hook [usbinput]
    [2009-10-27 09:50] :: Parsing hook [keymap]
    [2009-10-27 09:50] :: Parsing hook [filesystems]
    [2009-10-27 09:50] :: Generating module dependencies
    [2009-10-27 09:50] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-10-27 09:50] ==> SUCCESS
    [2009-10-27 09:50] ==> Building image "fallback"
    [2009-10-27 09:50] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-10-27 09:50] :: Begin build
    [2009-10-27 09:50] :: Parsing hook [base]
    [2009-10-27 09:50] :: Parsing hook [udev]
    [2009-10-27 09:50] :: Parsing hook [pata]
    [2009-10-27 09:50] :: Parsing hook [scsi]
    [2009-10-27 09:51] :: Parsing hook [sata]
    [2009-10-27 09:51] :: Parsing hook [usb]
    [2009-10-27 09:51] :: Parsing hook [pcmcia]
    [2009-10-27 09:51] :: Parsing hook [usbinput]
    [2009-10-27 09:51] :: Parsing hook [keymap]
    [2009-10-27 09:51] :: Parsing hook [filesystems]
    [2009-10-27 09:51] :: Generating module dependencies
    [2009-10-27 09:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-10-27 09:51] ==> SUCCESS
    [2009-10-27 09:51] upgraded kernel26 (2.6.31.4-1 -> 2.6.31.5-1)
    [2009-10-27 09:51] upgraded libfetch (2.25-1 -> 2.26-1)
    [2009-10-27 09:51] upgraded libgpg-error (1.6-1 -> 1.7-2)
    [2009-10-27 09:51] upgraded libpciaccess (0.10.8-1 -> 0.10.9-1)
    [2009-10-27 09:51] upgraded libspectre (0.2.2-2 -> 0.2.3-1)
    [2009-10-27 09:51] upgraded xf86dgaproto (2.0.99.1-1 -> 2.1-1)
    [2009-10-27 09:51] upgraded libxxf86dga (1.0.99.1-1 -> 1.1.1-0.1)
    [2009-10-27 09:51] upgraded mlocate (0.22.2-1 -> 0.22.2-2)
    [2009-10-27 09:51] upgraded sqlite3 (3.6.18-1 -> 3.6.19-1)
    [2009-10-27 09:51] upgraded nss (3.12.4-1 -> 3.12.4-2)
    [2009-10-27 09:51] upgraded pcmanfm (0.5.1-2 -> 0.5.2-1)
    [2009-10-27 09:51] upgraded perl (5.10.1-3 -> 5.10.1-5)
    [2009-10-27 09:51] upgraded pixman (0.16.0-1 -> 0.16.2-1)
    [2009-10-27 09:51] upgraded popt (1.14-1 -> 1.15-1)
    [2009-10-27 09:51] upgraded pygtk (2.16.0-1 -> 2.16.0-2)
    [2009-10-27 09:51] upgraded python (2.6.3-2 -> 2.6.4-1)
    [2009-10-27 09:51] upgraded qtcurve-gtk2 (0.69.0-1 -> 0.69.2-1)
    [2009-10-27 09:51] upgraded randrproto (1.3.0-1 -> 1.3.1-1)
    [2009-10-27 09:51] upgraded recordproto (1.13.2-2 -> 1.14-1)
    [2009-10-27 09:51] upgraded tzdata (2009n-1 -> 2009o-1)
    [2009-10-27 09:51] upgraded xbitmaps (1.0.1-2 -> 1.1.0-1)
    [2009-10-27 09:51] upgraded xcursor-themes (1.0.1-2 -> 1.0.2-1)
    [2009-10-27 09:51] upgraded xf86miscproto (0.9.2-2 -> 0.9.3-1)
    [2009-10-27 09:51] upgraded xf86vidmodeproto (2.2.99.1-1 -> 2.3-1)
    [2009-10-27 09:51] upgraded xineramaproto (1.1.99.1-1 -> 1.2-1)
    [2009-10-27 09:51] upgraded xorg-apps (7.4-2 -> 7.5-1.1)
    [2009-10-27 09:51] upgraded xproto (7.0.15-1 -> 7.0.16-1)
    [2009-10-27 09:51] upgraded xulrunner (1.9.1.3-1 -> 1.9.1.3-2)
    Last edited by ShadowKyogre (2009-10-28 01:32:52)

    I downgraded the kernel and the printer works again and I forgot to mention I had usblp blacklisted both before and after I upgraded.

  • System hangs on reboot/shutdown after kernel upgrades

    I've been experiencing the problem that, whenever pacman upgrades the kernel, the system hangs on reboot or shutdown.  It only happens on the first reboot/shutdown after a kernel upgrade.  I've noticed it consistently for a while now.
    To reboot, I issue:
    # reboot
    To shutdown, I issue:
    # shutdown -h now
    I should also mention that I typically reboot after kernel upgrades because hotplugged storage devices (USB, SD) fail to be detected unless the system reboots.  That is, devices plugged in during the upgrade remain usable, but plugging in something new appears in /dev.  There may be an obvious reason for it that I'm missing, but it's never bothered me enough to look into it.  Not sure if this and the reboot/shutdown issue are related, though.
    Any ideas would be greatly appreciated.  Thanks!

    When Apple Hardware Test says there is a problem, there definitely is a problem.
    But like many diagnostics, it does not catch everything.
    It can increase your confidence that you do not have gross flaws. The Hardware problems that remain may be more subtle ones.

  • PC-Suite sync fails after Firmware upgrade of E65

    After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
    - PC-Suite updated to 7.0.9.2
    - Outlook 2003
    - XP Prof.
    Any ideas?
    Solved!
    Go to Solution.

    The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
    Does somebody has an idea?

  • Udisks inhibiting fails after system upgrade

    Hi,
    To keep my cdrom silent I have in rc.local this line:
       udisks --inhibit-all-polling &
    It worked fine, but stopped working after yesterdays upgrade
    Now it (in console) returns:
       Inhibit all polling failed: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    And in kernel.log I found this:
       May 29 20:58:27 Mypc2 kernel: [ 2160.206487] INFO: task udisks-daemon:2105 blocked for more than 120 seconds.
       May 29 20:58:27 Mypc2 kernel: [ 2160.206491] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
       May 29 20:58:27 Mypc2 kernel: [ 2160.206494] udisks-daemon   D c109b5e5     0  2105      1 0x00000000
       May 29 20:58:27 Mypc2 kernel: [ 2160.206500]  f4b29d8c 00000086 f4b29d04 c109b5e5 00000001 00000000 f4a9f980 f533de00
       May 29 20:58:27 Mypc2 kernel: [ 2160.206507]  f2748400 f533de00 f4b29d14 c127164f 000000c3 f6006380 c14c4380 f4a9f8c0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206514]  f4a9fa84 f533de48 f533dfd4 c14c4380 f6006380 f4a9f8c0 c142df60 00000000
       May 29 20:58:27 Mypc2 kernel: [ 2160.206521] Call Trace:
       May 29 20:58:27 Mypc2 kernel: [ 2160.206531]  [<c109b5e5>] ? __rcu_read_unlock+0x185/0x190
       May 29 20:58:27 Mypc2 kernel: [ 2160.206536]  [<c127164f>] ? sock_def_readable+0x5f/0x70
       May 29 20:58:27 Mypc2 kernel: [ 2160.206541]  [<c11a3a42>] ? kobject_get+0x12/0x20
       May 29 20:58:27 Mypc2 kernel: [ 2160.206546]  [<c1195a8f>] ? get_disk+0x6f/0x120
       May 29 20:58:27 Mypc2 kernel: [ 2160.206552]  [<c131ad9d>] __mutex_lock_slowpath+0x10d/0x2b0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206556]  [<c131af4b>] mutex_lock+0xb/0x20
       May 29 20:58:27 Mypc2 kernel: [ 2160.206560]  [<c1131447>] __blkdev_get+0x47/0x320
       May 29 20:58:27 Mypc2 kernel: [ 2160.206564]  [<c1131762>] blkdev_get+0x42/0x290
       May 29 20:58:27 Mypc2 kernel: [ 2160.206567]  [<c11319fe>] blkdev_open+0x4e/0x70
       May 29 20:58:27 Mypc2 kernel: [ 2160.206572]  [<c1102e36>] __dentry_open+0xe6/0x300
       May 29 20:58:27 Mypc2 kernel: [ 2160.206576]  [<c1104186>] nameidata_to_filp+0x66/0x80
       May 29 20:58:27 Mypc2 kernel: [ 2160.206579]  [<c11319b0>] ? blkdev_open+0x0/0x70
       May 29 20:58:27 Mypc2 kernel: [ 2160.206584]  [<c111124f>] finish_open+0xaf/0x1a0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206587]  [<c1110043>] ? do_path_lookup+0x53/0xe0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206591]  [<c1111838>] do_filp_open+0x1d8/0x6a0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206595]  [<c11affff>] ? kstrtoll+0xf/0x80
       May 29 20:58:27 Mypc2 kernel: [ 2160.206600]  [<c115ac27>] ? sysfs_release+0x77/0x90
       May 29 20:58:27 Mypc2 kernel: [ 2160.206604]  [<c11041f5>] do_sys_open+0x55/0xf0
       May 29 20:58:27 Mypc2 kernel: [ 2160.206608]  [<c1103569>] ? filp_close+0x49/0x70
       May 29 20:58:27 Mypc2 kernel: [ 2160.206611]  [<c11042b9>] sys_open+0x29/0x40
       May 29 20:58:27 Mypc2 kernel: [ 2160.206615]  [<c10037df>] sysenter_do_call+0x12/0x28
    I looked at packages that were upgraded yesterday, and here are few that can be relevant to this issue:
       [2011-05-28 22:48] upgraded udev (167-2 -> 171-1)
       [2011-05-28 22:49] upgraded udisks (1.0.3-2 -> 1.0.3-3)
       [2011-05-28 22:51] upgraded kernel26 (2.6.38.6-1 -> 2.6.38.7-1)
       [2011-05-28 22:51] upgraded kernel26-headers (2.6.38.6-1 -> 2.6.38.7-1)
       [2011-05-28 22:52] upgraded udev-compat (167-2 -> 171-1)
    So what might be wrong? Any ideas?
    Thanks

    What if you disable polling of a specific device with " udisks --inhibit-polling /dev/the_devicename & " ? So without 'all', and using the_devicename that "ps aux | grep udisks-daemon" shows?
    And have you tried using and udev rule instead of a line in rc.local? For example I use this to disable polling a card reader:
    # /etc/udev/rules.d/02-udev-disable-cardreader-polling.rules
    SUBSYSTEM=="block", ENV{ID_VENDOR}=="APPLE*", ENV{ID_MODEL}=="SD Card Reader*", ENV{UDISKS_DISABLE_POLLING}="1"

  • My iphone 5 wont reboot again after i upgraded to ios8

    My iPhone 5 wont work properly after i upgraded to ios8 all i can see on the screen is apple logo that made it looks like its starting but it wont start up since yesterday please I need help. It's all started after I upgraded to ios8 and after that I noticed that I couldn't send picture messaging to android then I also knew the message settings on my phone that has mms option is not on my phone anymore then I called apple to help me then the lady told me that my ios8 didn't probably install correctly that I should restart my network settings, I did that but it still wont work so I called again the other apple rep told me to reset all settings that everything will come back to normal and immediately I press the reset button my phone went off and turned on after booting for a while but it wont take me to home page but blank with apple logo on it since yesterdays afternoon, I'm really frustrated and ****** ...please kindly help me thanks.
    Azeez

    My wifes has started to do the same, the iphone 3Gs was mine, I updated it to ios 5.0.1 while still using it and it was fine. I did a backup restore of her old 3G phone and again it was find for awhile.
    We noticed she doesnt have any data part of her package so we have switched off the data, since then we have this issue.
    I had to install a new docking part of the phone as her mic was faulty, I did the sim out, switch on 3G and data and then sim back in. Switched the phone off and then back on. all good.
    I stripped the phone down adn replaced the part. again all good. That I night my wife said Shall she turn the phone off in which I replied it should be fine. When she turned the phone on in the morning, the reboot problem was back.
    I'm wondering if the problem is to do with the Data on and off. I've also noticed that when the phone is up beofre it reboots, you can pop out the sim and the signal stays the same.
    When it does have a problem, she now does a quick reset from the phone which takes about 5 minutes and shes back up and running. its big pain!
    Think I will get her on a data package and then try again

  • 3gs iOS 6.1.2 call failed - after software upgrade

    After the upgrade, i can receive calls, connect to wireless, send texts and play sounds, but cannot make calls.
    "Call Failed" is the msg i get wthin a second of dialling.
    The signal strength is excellent and since i have tried calling several phones (land and mobiles, with different providers/carriers) within my home, I know they are not busy and it cannot be a network problem.
    Any suggestions?
    thanks

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Hard disk problems after full upgrade [SOLVED]

    After a full upgrage (pacman -Suy) last monday, My system denied to boot:D:D:D:D:D.
    So to fix it I have to go to /boot/grub/menu.list and change from hda3 to sda3. Everything seems to be Ok but when the system is booting and scan the the hard disk to check bad, It drops me to the shell with the error that there is something wrong with my hard disk and it suggest me to set the superblock to 8139.
    So to fix it I boot my PC from Arch live CD, use the following command:
    #fsck.ext3 -c -f /dev/sda3
    #fsck.ext3 -b 8139
    Everything seems to be Ok, there is no bad in my hard disk.
    When I boot my system again, I got the same error again, I came back to live CD, check the hard disk, set the superblock as It told me and again, I got the error when I boot from the hard disk.
    This is the second PC with the same error.
    Three months ago, I upgraded my Server and got exactly the same problem. Because this is the server, I need it run ASAP, so I modified the rc.sysinit script so that the system will not check my hard disk when It boots. :P:P. And my Server can run without any problems since then.
    I don't have time much to spend on this error and my PC is in the Lab now so I can't provide the detail of the error until next Monday. Sorry for that.
    Any idea how to fix this error?
    Cheers.
    Last edited by hungsonbk (2008-06-25 10:26:35)

    tigrmesh wrote:Did you review and merge any .pacnew files after the upgrade?
    :D:D I am a kind of lazy guy so when I did pacman -Suy, I just leave it running without reading information on the terminal.
    milan wrote:I guess you didn't change entries in /etc/fstab (hda->sda).
    Yes, you are right. I changed from hda to sda in /boot/grub/menu.lst but I forgot to do the same in /etc/fstab files. On Monday I will check again if it is set correctly or not
    :D:D. I have just taken a quick look into the fstab file in my Server, The One with the same problem three months ago, and the fstab file is set correctly with sda partitions. I don't want to touch this server again or my services will be down. So this seems not the correct solution, but anyway, I will take a look at it next week.
    Thanks for your replies.

  • Reboot fails after software update - what now?

    I've just performed a regular software update. I think it included the following 4 items:
    - iPhoto 08 (enhanced printing etc.)
    - Raw module update
    - 10.5.5 update
    - ??? don't remember this one
    Three of the updates required a reboot so I opted to reboot immediately after installation.
    Unfortunately I do not get beyond the white screen. I don't even get to the apple logo screen? Is there any way to restore without doing a reinstallation of the OS?
    This is the first time I'm running into serious issues like this
    Any help appreciated.
    Thanks,
    Olaf

    flatpicker wrote:
    I've just performed a regular software update. I think it included the following 4 items:
    - iPhoto 08 (enhanced printing etc.)
    - Raw module update
    - 10.5.5 update
    - ??? don't remember this one
    Three of the updates required a reboot so I opted to reboot immediately after installation.
    Unfortunately I do not get beyond the white screen. I don't even get to the apple logo screen? Is there any way to restore without doing a reinstallation of the OS?
    This is the first time I'm running into serious issues like this
    Yes, I stopped doing multiple updates, esp. those requiring a reboot. I do the one-at-a-time now, and for the major updates, I do them manually from the Apple download page.
    You have what I call a "stuck" update and what usually clears it is a safe boot.
    Boot into the safe mode by holding down the shift key during boot. At the login screen just click restart and see if the system boots normally (it usually does) and see if all the DLs installed.
    Post back either way. We never give up

  • Forms and Reports 6i connections fail after db upgraded 10gr2

    After database upgraded to 10gr2 on 64bit Windows 2008 server, connections from forms and reports 6i hang while sqlplus connections work. After database is restarted, connections to forms and reports work again but only for a few days?
    Also if authenication is changed from NTS to NONE, we do not experience any connection problems from forms or reports.
    Any suggestions would be appreciated.
    Thanks

    Hi!
    Is there maybe a database package that gets invalid form some reason?
    And if forms/reports tries to connect, the package should get compiled cause of a call
    to it and this ends in a endless lock?
    Regards

  • Apcupsd working strangely after system upgrade [SOLVED?]

    I'm having an odd problem with the apcupsd (3.10.17-1) package in the Community repo.  I'm running a Back-UPS RS 1000 according to apcaccess.  It was working swimmingly through a USB connection until recently.  I have the timeout set to 0 and the automatic shutdown set when the battery reaches 5%.
    After my system-wide upgrade, there popped up a problem.  Although 'apcaccess status' tells me that my unit is online and the battery charge is at 100% and the load and timeleft is reasonable, the daemon doesn't actually use this information when a switch to battery happens.
    When there is a switchover from a power-outage, the system shuts down (despite timeout set to 0).  Later when I check the log in /var/log/apcupsd.events, it says, for example,
    Fri Jul 15 19:24:11 EDT 2005 apcupsd 3.10.17 (18 March 2005) unknown startup succeeded
    Sat Jul 16 18:11:26 EDT 2005 Power failure.
    Sat Jul 16 18:11:26 EDT 2005 Reached remaining time percentage limit on batteries.
    Sat Jul 16 18:11:26 EDT 2005 Initiating system shutdown!
    Sat Jul 16 18:11:26 EDT 2005 User logins prohibited
    Sat Jul 16 18:11:28 EDT 2005 apcupsd exiting, signal 15
    Sat Jul 16 18:11:28 EDT 2005 apcupsd shutdown succeeded
    The first line being when I booted my system.  As you can see, it thinks it reached the 5% limit, despite telling me it had 100% earlier.  It's a new battery and the hardware is not bugging me in any way.
    I've read other people having some trouble with USB after recent upgrades of DBUS (I'm running 0.34-1), or perhaps it is UDev (060-5).  Could this be related?  I'm not sure which upgrade did it because I don't test my apc unit after every pacman -Syu.

    Well, the problem mysteriously disappeared (apparently).  I did update udev... maybe that has something to do with it.  Did no one else have this problem?

  • Accessing the ETL Getting Started after ODI Upgrade - SOLVED

    Connected to the topology manager as SUPERVISOR and upgraded the work repository.
    Thanks
    Fabio D'Alfonso
    Hi,
    I was going back to take a look at the Getting started with ETL.
    After the upgrade to 10.1.3.5.3 (and also 10.1.3.6.0) I cannot access the sample environment.
    I upgraded the sample repository but the message still states that the repository is outdated.
    Should I setup a full new environment to get back the ability to look at the getting started?
    Thanks
    Fabio D'Alfonso
    Edited by: Fabio D'Alfonso on Jun 9, 2010 2:33 PM

    Connected to the topology manager as SUPERVISOR and upgraded the work repository.
    Thanks
    Fabio D'Alfonso
    Hi,
    I was going back to take a look at the Getting started with ETL.
    After the upgrade to 10.1.3.5.3 (and also 10.1.3.6.0) I cannot access the sample environment.
    I upgraded the sample repository but the message still states that the repository is outdated.
    Should I setup a full new environment to get back the ability to look at the getting started?
    Thanks
    Fabio D'Alfonso
    Edited by: Fabio D'Alfonso on Jun 9, 2010 2:33 PM

  • Constant reboot after IOS4 upgrade Solved!

    I too was having the dreaded error 29 code and stuck in recovery mode along with the 5 minute constant reboot since upgrading to IOS4 two days ago. I had to use Blackra1n to get it out of recovery. Blackra1n will NOT jailbreak IOS4 but will fix the stuck recovery mode problem. I also had previously replaced the battery with a higher capacity mAh. the upgrade to v3.1.3 went perfect. Only when I upgraded to IOS4 did things change. It would constantly reboot and the battery was slowly draining and would not recharge. I poured through countless forum posts and tried most all of them. Then this evening I found a post somewhere in this forum about possibly the battery was causing the problem. So I got out my tools and put the original battery back in and booted up. It got to the front screen and immediately a bunch of old calendar events started popping up which was different than before. I cleared them all and I have now had my iphone on steady for over an hour and not one reboot. Battery is also now recharging off my laptop.
    So long story short, if you've replaced your battery at some point, put it back in or hopefully an OEM with same APN: 616-0434 (#for my iPhone). Everything is now working in IOS4!
    Good battery replacement guide here: http://www.rapidrepair.com/guides/iphone-3g-s-repair/iphone-3g-s-dissasembly-rep air-guide.html

    Booted into Faunos Live system.
    As root, ran Fsck on the HDD with inode problem.  Answered yes to all system repair queries.
    Rebooted into archlinux HDD with no problems.

Maybe you are looking for

  • Month Scrolling No Longer Works In Calendar (Mavericks)

    Not sure what is causing this but I can no longer scroll in Month View on Calendar.  I can use the arrows (top left corner) to go back and forth (not scrolling) and scrolling DOES work in other views (Day, week, etc).  Also, vertical scrolling DOES w

  • How do I migrate a vs5 catalog to vs9 catalog?

    This has been a comedy of errors. Received a new computer for Christmas with version 9 Elements loaded on it. My new computer has a new directory for photos than my old computer. Tried to migrate my version 5 catalog to the new computer and was think

  • Photo management in iphoto question...

    Hello...i am new to Mac os and i currently use iphoto for all my photo needs. I love the ease of iphoto in viewing images and creating slideshows, but i would rather have more control over my images. I want to just upload my processed and edited imag

  • Adobe Camera Raw 6.1 RC build available on Adobe Labs

    Please check out http://labs.adobe.com/wiki/index.php/Camera_Raw_6.1. Release Notes Newly supported camera models include: Canon EOS 550D (Digital Rebel T2i/ EOS Kiss X4 Digital) Kodak Z981 Leaf Aptus-II 8 Leaf Aptus-II 10R Mamiya DM40 Olympus E-PL1

  • Where is the download page for 9/04?

    Yes, I know that 10 is out, but I'm not ready to move to it yet for various reasons. So, anyone have the magic StoreId & PartDetailId to get the dumb sunstore to take me to the FREE downloads for Solaris 9 x86 & sparc? It would seem that the links fo