Reboot fails OS X 10.6.7 mac "error occurred during installation"

Macbook pro wont install OS X 10.6.7 "error occurred during installation"

Try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try reinstalling the 10.6.7 update. Be sure you are using the Combo Updater.

Similar Messages

Installation of itunes 11.5.1 failed. I get the following message "errors occurred during installation before Itunes could be configured. Your system has not been modified. To complete the installation run the installer again. So I tired agian and again

I went into control panel unistalled apple mobile device support, apple software update, apple application support,and bonjour. i have QuickTime 7.7.5 installed on laptop. I rebooted and tired again failed same error. I removed the apple programs again went into registry and deleted any reference to apple or itunes. I deleted files in program x86 directory, common files. reboot reinstalled failed. any suggestions?
Using 2 ipad airs need at least 11.1 cannot install new itunes but I can insta ll old versions but that will not work with new ipads..
Windows 8

See Troubleshooting issues with iTunes for Windows updates.
tt2

HT6001 installation of itunes 11.5.1 failed. I get the following message "errors occurred during installation before Itunes could be configured. Your system has not been modified. To complete the installation run the installer again. So I tired agian and

I went into control panel unistalled apple mobile device support, apple software update, apple application support,and bonjour. I rebooted and tired again failed same error. removed the apple programs again went into registry and deleted and reference to apple or itunes. deleted files in program x86 directory, common files. reboot reinstalled failed. any suggestions?
Using 2 ipad airs need at least 11.1 cannot new itunes but can insta;ll old versions but that will not work with new ipads..

See Troubleshooting issues with iTunes for Windows updates.
tt2

Errors occurred during installation, install failed.

So recently I got into a bit of trouble when my web browsers got hacked and started installing some adware on my computer... I'm still getting that sorted out, but I think while I was going through my "Common Files" folder and deleting things that looked suspicious, I accidentally deleted some kind of file for Apple's many programs that install with iTunes. I realized my mistake when, at the next reboot, Windows gave me an error that some program could not start due to a missing .dll file and then gave me the program name, which as it turns out was Apple Application Support. I uninstalled the support program to attempt to correct the issue, but when I did it only broke things further! iTunes claimed that it could not work without the support software, so I tried uninstalling and reinstalling iTunes to get the Application Support program back. Sadly, this did not work either as iTunes did not uninstall correctly, freezing windows explorer. Then when I downloaded the install file to try again, it gives me an error almost immediately saying "Errors occurred during installation, your system has not been modified. Run the installer again." (I'm paraphrasing) When I run it again, the same thing happens.
In conclusion, it appears that by deleting one simple file, I have broken iTunes permanently and I can no longer use it on my computer. Ugh. Can anyone help me get it back? I can't believe I'm even asking this... I'm not really an apple fan but I do use it to put videos and stuff on my iPad and I have a bunch of playlists in there that I've spent time organizing, so I still use it as my "main" mp3 player. This is very inconveinent!

Windows gave me an error that some program could not start due to a missing .dll file and then gave me the program name, which as it turns out was Apple Application Support. I uninstalled the support program to attempt to correct the issue,
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I can't update mac os x from 10.6.4. During installation a window pops up that says: "error occurred during installation" I also cannot update iTunes

cannot update itunes or mac os x. I don't know why. Help?

Did you attempt to update with Software Update? Try this instead: download the combo updater here:
http://support.apple.com/kb/DL1361
Once downloaded, unplug all peripherals except keyboard and mouse
Verify disk as outlined previously
install update
repair permissions (Applications > Utilities > Disk Utility)
restart Mac
run Software Update
if there are many updates available, install a few at a time
repair permissions after the install
restart Mac

MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant to repair damaged index did not work

After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
Following this instruction resulted in the same failure message being repeated continuously.
How do I proceed to upgrade the Mail app.?

If doing as the alert directs (relaunching Mail) has no effect, see below.
The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
☞ All your incoming mail accounts are on an IMAP or Exchange server
☞ You store sent messages on the server
☞ You don't have any "On My Mac" mailboxes
Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
If you know that the conditions above are satisfied, continue as follows.
Quit Mail if it's running. Back up all data.
Open the Library folder in your home folder by holding down the option key and selecting
Go ▹ Library
from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

Analysis Services failing to Start . File system error: Error occurred during the creation of directory

Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SG

Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway

OSD - Failed to run Task Sequence. An error occurred while starting the task sequence (0x8007000E).

Failed to run Task Sequence.
An error occurred while starting the task sequence (0x8007000E)."
While OSD, picks up task sequence but fails in resolving task sequence dependencies. SMSPXE identifies device is not in database (unknown).
SMSTS.log shows
ThreadToResolveAndExecuteTaskSequence failed. Code(0x8007000E)" in SMSTS.LOG, have seen other articles suggesting failure due to lack of storage (RAM) but this task sequence has worked in past.
By the way, if I create a stand alone media, we are able to image the workstation. What has changed in the task sequence such that the workstation is unable to download policies due to lack of storage (RAM) on workstation. Workstation has 2 GB of RAM.

I have found a work around for the issue, even though the computer is unknown, there were software updates targeted to the ALL SYSTEMS collection which applies to All Unknown Computers and therefore to x64 Unknown Computer and x86 Unknown Computer.
We had a SCEP ADR applying definition updates to All Systems, we applied the ADR to a different collection, removed all the SCEP updates to All Systems and successfully re-imaged the workstation. Following article was of great help in identifying the problem
after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log
Thanks Gerry for your assistance.

Adobe Acrobat XI installation fails when get Error 1935 "during installation of assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E} HRESULT: 0X8007054F

Adobe Acrobat XI installation fails when get Error 1935 "during installation of assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E} HRESULT: 0X8007054F

Hey Nicholas,
The following link might help in resolving your issue :
http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html
Please let me know if this helps with your issue.
Regards,
Rahul

The upload has failed. An unknown server error occurred during processing. Please try again

I keep getting this message when I try to upload a folio "The upload has failed. An unknown server error occurred during processing. Please try again". It happens every time, some articles do upload but some not.

Thanks Automator21 I manage to upload most of my articles successfully by starting again the whole process. But I have 4 articles that I can't upload, all of this articles have big size videos (one 50mb, other one with 70mb, other with 4 small 30mb videos). I could upload those articles by taking the videos out, but I want those videos on my articles.
I use Adobe Media Encoder to compress the videos and they are not in high quality, for example the 70mb file is an 640x480 8 min. long video. And they are all with H.264 encoding and .mp4.
Do you know how can I fix this problem.
Thanks!

ERROR: An error occurred during the installation of assembly component / ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

During the Installation of LR I get an error message. Initially I didn't have enough space for the installation on the start partition drive. However, now, it should be sufficient and I re-booted the computer a couple of time, hence I would assume that the temporary installation files have been deleted.
Now, nevertheless each time I try to re-install the software I get the following messages:
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
Since PS was installed without problems I would refrain from deinstalling the Creative Cloud and start over again.
Any hints?
Thx

Claasd5335054 you will want to review the MSI log files to determine what error message is preventing the installation from completing.
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
This is the only error information contained within Adobe Lightroom 5's installation log. The MSI log files contain the additional error messages.

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

I receive an error in Firefox 4.0 Beta 11: Secure Connection Failed An error occurred during a connection. Renegotiation is not allowed on this SSL socket. (Error code: ssl_error_renegotiation_not_allowed) Anyone know how to fix this?

I have installed the Firefox 4.0 Beta 11 (+updates), I try to connect to our https: website and I receive the following error:
Secure Connection Failed An error occurred during a connection.
Renegotiation is not allowed on this SSL socket.
(Error code: ssl_error_renegotiation_not_allowed)
I have installed this certificate on Firefox 3.6.13 and I am able to connect to our HTTPS site but it will not work with the Beta 4.0 11

I read about this for ages. I had problems setting up a certificate for my online banking. This one solution genuinely worked for me (finally!) ...Fingers crossed it will for you too:
1) In the address bar type in '''about:config''' ...Firefox will say it's dangerous, but I just went ahead anyway lol - It's fine. Thank god there's always an edit-undo!
2) Copy and paste this into the ''filter'' at the top: '''security.ssl.allow_unrestricted_renego_everywhere'''
3) Then change ''false'' to ''true'' (I think I just clicked it, and it changed)
That's it! Refresh your bank page, and it should work!
(Spanish source: '''http://translate.google.com/translate?sl=es&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.fedora-ve.org%2F2011%2F09%2F14%2Ferror-error-code-ssl_error_renegotiation_not_allowed-en-firefox-4-x.html&act=url''')

Problem updating After Effects CC (2014) I get this message: Update Failed Error encountered during installation. (U44M1P7)

Problem updating After Effects CC (2014) I get this message: Update Failed Error encountered during installation. (U44M1P7)

Hi,
It’s version 13.1.1 It’s a trial version.
I am updating it from the Creative cloud desktop application.
I have the photography subscription with Lightroom and Photoshop with Creative Cloud.
I was interested in trying out the video software and have trials of Premiere Pro as well as others. The CC desktop app alerted me to the AF update just as it does for the others I subscribe to plus the ones I am using as trials. I have not had any problems with the other apps (trial or not), only with AF.
Thanks.
Nancy Chadwick

I tried updating my Photoshop CS6 via the cloud and received the following message...Update failed Errors encountered during installation.(U44M1P7). What does that mean

I tried updating my Photoshop CS6 via the cloud and received the following message...Update failed Errors encountered during installation.(U44M1P7). What does that mean

http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Reboot fails OS X 10.6.7 mac "error occurred during installation"

Similar Messages

Maybe you are looking for