Reboot failure from cancelling windows setup with bootcamp!

I tried to run bootcamp. During the setup process, there was an error message so I decided to quit the setup. Now my computer will not reboot correctly and I'm freaking out. Are there any key functions that I can use to reboot? All I see is a black screen with a blinking line that looks like the underscore...I am just switching from windows to mac, so this is all brand new to me

Ok NOW I was able to get my windows xp cd to eject. Now my computer is prompting me to install Leopard again? And when I get to the Select a Destination box, NOTHING appears/ Can someone help me please! I am so fed up with this thing!

Similar Messages

Consistent failure at installing Windows 7 with BootCamp

A couple of weeks ago the 1TB hard drive of my mid-2010 21.5 inch iMac died, and I had it replaced with a 2TB hard drive.
As an architect, it is important for me to have access to Windows 7 (at least) so that I can make use of the Autodesk Revit software, among other programs. It is very important that I install Windows 7 on my new hard drive ASAP!
My SuperDrive seems damaged; it has trouble reading disks, as well as burning them (i.e. it simply cannot burn disks) and to circumvent this I purchased an external disk drive (a "LaCie Slim DVD" USB connected disk drive) which I have plugged in to my iMac. While I can confirm that this drive works fine - it was capable for one of burning a disk at 8x - I am encountering a problem when I try to restart the computer and commence installing Windows 7.
Specifically, I get a black screen (in the microsoft DOS kind of style) with a line of text saying, roughly: 'No boot disk detected -- please insert a boot disk and press any key to continue'.
Obviously, my boot disk is inserted. I have tried using Startup Disk to force the computer to use the disk in my external disk drive, but it hasn't worked. I have even tried using the old, damaged SuperDrive in the iMac but it presents me with the same screen. Sometimes it seems as though the external drive isn't activated when I start the computer - but other times it does have a glowing green light and makes that disk drive noise - even when the black screen with 'No boot disk detected -- please insert a boot disk and press any key to continue' is showing.
So what is my ultimate question?
How can I install Windows 7 on my iMac with a busted SuperDrive, using my external Disk drive that my computer seems to be ignoring?
I know MacBook Air laptops are capable of installing Windows with a USB - is that right? - can a very clear tutorial be provided to me as to how I can go about doing this?
I simply have to have this installed on my computer so I can access Revit ASAP, please help!

There could be another workaround, but I hesitate to mention it:
Install Parallels Desktop 9 for Mac and use it to create a Windows 8.1 virtual machine.
DISCLAIMERS:
1. I have not tried Parallels Desktop 9 under Mavericks, nor Windows 8.1 under Boot Camp under Mavericks, so this is not a personal endorsement, nor can I provide specific help because I'm still using Parallels 7, and Windows 7, not Parallels 9 and Windows 8.1
2. Parallels probably does not provide adequate performance for your Windows application software, compared with a Boot Camp installation.
3. There could well be compatibility issues with your Windows software and hardware. The mainstream stuff like Microsoft Office is fine. The more esoteric the software and more specialized the hardware (digitizers, plotters, 3-D printers), absolutely no guarantees.
So, Parallels 9 allows you to create virtual Windows machines that DO NOT REQUIRE BootCamp partitions, and you can install a legitimate copy of Windows from either a DVD or USB.
If you still want to give it a shot, download a free full version of Parallels Desktop 9 for Mac for a 14-day free trial here:
http://www.parallels.com/products/desktop/#tab4
Once the free trial has expired, it's $79.99 to purchase a license for one machine. You do not have to re-install and re-download if you purchase a license. you simply install the license code into the trial copy. If you already own a recent version of Parallels, there might be a less expensive upgrade available for $49.99.
I have successfully installed my legitimate OEM copy of Windows 7 64-bit copied to a USB stick, while running OS X 10.8.5 with Parallels 7, and my legitimate OEM copy of Windows XP from CD. It's not strictly plug and play. You do have to configure the Parallels Desktop settings to know where to look for the Windows installation files.
There is also VMware, and other virtual-machine software out there, but I have no experience with them.

Mountain Lion cannot reboot after I used windows 7 with bootcamp

I go to bootcamp partition and run windows 7 without any problems.
Then I restart and try to use Mountain Lion on an encrypted partition. It keeps rebooting.
Then I keep trying until I can go back to mountain lion. I don't know what I do that makes it work. I keep shuting it down and trying again, safe mode whatever.
Once I finally get Mountain Lion to start, it appers to be working perfectly.
The error when I can finally use mountain lion again is this:
Interval Since Last Panic Report: 214700 sec
Panics Since Last Report:          2
Anonymous UUID:                    0DB82237-2402-D8D5-1417-B0952197DE8E
Mon Dec 24 12:43:41 2012
panic(cpu 0 caller 0xffffff80130b7bd5): Kernel trap at 0xffffff801302e906, type 12=stack bounds, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8085a1e000, CR3: 0x0000000015d48000, CR4: 0x0000000000000660
RAX: 0x36583b85c59a0096, RBX: 0xffffff801e1b6000, RCX: 0x0000000009000000, RDX: 0xffffff807f9b8078
RSP: 0xffffff808b1dbe40, RBP: 0x01ffff808b1dbeb0, RSI: 0xffffff807f9b8068, RDI: 0x0000000000000000
R8: 0xffffff80136bec60, R9: 0x0000000000000000, R10: 0xffffff801e0422b0, R11: 0xffffff801367de88
R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0xffffff801e1b8000, R15: 0x0000000000000000
RFL: 0x0000000000010046, RIP: 0xffffff801302e906, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff8085a1e000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808b1dbae0 : 0xffffff801301d626
0xffffff808b1dbb50 : 0xffffff80130b7bd5
0xffffff808b1dbd20 : 0xffffff80130ce4ed
0xffffff808b1dbd40 : 0xffffff801302e906
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x1ffff808b1dbeb0
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000012e00000
Kernel text base: 0xffffff8013000000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 1349189652
last loaded kext at 314691811: com.apple.driver.XsanFilter          404 (addr 0xffffff7f94d27000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.driver.AppleMCP89RootPortPM          1.11
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

You can install Windows in BootCamp (it will be a fresh installation) and you can remove the existing VM installation. Windows will run faster in Boot Camp than it will in a VM (parallels is a VM).
Please note that MacBook Pro's have 2 ram slots, and they will both be occupied with a 2G chip in a standard configuraton, there will be nowhere to install the other 4G that is in the mail. Return it and order 2 x 4G chips and remove the 2 x 2G chips already fitted.

Hi, can I install windows XP with bootcamp on my iMac which is now on Maverick? Please help.

Hello all, can I install windows XP with bootcamp on my iMac which is now on Maverick? Please advise. Thank you.

Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

Installing Windows 7 with Bootcamp question

Hey guys, I recently switched over from a PC to a Mac this year and wanted to install Windows 7 with Bootcamp so I could do some gaming every once and a while. I've read that I can't use the restore discs that I got with my ASUS to install Vista, so that's out of the question. I also have a Windows 7 upgrade disc that I used a while back to install Windows 7 on the ASUS. Will that upgrade disc work if the ASUS is restored? If not, will an OEM copy of Windows 7 be all I need? A retail copy of Windows 7 Home Edition is kind of steep to only be used part of the time.
Thanks in advance!

Well, "WHICH" Mac do you have?
Go to the Apple menu (upper left corner)/About This Mac/More Info and at the top (under Hardware content) it should say "Model name" and "Identifier". Then put it in your profile so you don't have to keep remembering to do it.:)
You might call/e-mail ASUS and ask if it can be used on another computer. Don't tell them it will be used on a Mac. Just tell them your thinking on building one from scratch.
If you have a "desktop" ASUS then you MIGHT be able to just switch over the HD after Upgrading it to 7, but I believe the ASUS, Dell, etc, setups are "matched" to the COMPUTER so it might not work. A retail full version of Window 7 will work. You might also try Microsoft and tell them the same thing, might be able to get another "Upgrade"?
I'm in the same boat, just play a few games on XP but want to get Windows 7, you have to spend $100 dollars more for "Pro" to get the "Windows XP Mode"! E-Bay does have it quite a bit cheaper then Microsoft sells it for.

Trying to install Windows 7 with Bootcamp on my Macbook with a faulty CD drive

I am trying to install Windows 7 with Bootcamp on my Macbook A1278 (OS 10.6.8) with a faulty CD drive (CDs and DVDs get stuck in it and I had to get it removed in an Apple store, so I don't want to use it anymore). I have got a licence for the product but I am only in possession of the ISO, is there any way to install it using a USB stick?
I don't have many options while launching Bootcamp, only
"Download the Windows support software for this Mac" but when I try I get a message explaining me that the download could not continue as the software is not available,
or
"I have the Mac OS X installation disc [...]" but obviously I can't use my CD drive so this is not an option. I tried it anyway and I created a Windows partition but when asked to "start the Windows installer", I can only continue by insering a CD.
I tried to use a USB stick and added the ISO on it but nothing has changed.
How can I install my copy on Windows?...

BobTheFisherman > Hem, yeah, that is stating the problem and not working toward resolving it.
Turbostar > I checked the link and it seems to be relating to the first video I have seen on the subject. I tried to install Tuxera then to work with rEFIt, but I did not get any result yet (I don't know if I am doing something wrong during the USB writing process as many different ways are explained on different websites).
So far my last try was to launch Windows 7 USB DVD Download Tool on VMware Fusion but it the only disk shown is A:\ Removable disk (not the name of my USB) and it is stated that the disk is being used by another program, even though it's not open on the Mac side.
Some websites are advising to write the copy of windows on a USB via a PC and then launch it on the Macbook, so I might try that in the next few days. I will keep you updated.
If anyone has another option I might not have think about, or an advice on how to efficiently create a bootable Windows setup USB with my Mac, please let me know!

Windows 7 with bootcamp on Imac 27 mid-2010 impossible

I have purchased an IMAC 27 mod 2010 and I would like to install Windows 7 with Bootcamp.
I've tried everything from all sources infos. Impossible to install.
After last screen on windows install, when desktop is created for first user and last boot ... black screen with blinking cursor.
I've been able to run this install from VMWARE from OSX. I've tried to install last version of ATI driver, bootcamp 3.2 ... nothing work.
I'm totally lost from 2 weeks now.
I could I proceed to boot windows 7 on I IMAC ?
Please help

PierrotMobile wrote:
I have purchased an IMAC 27 mod 2010 and I would like to install Windows 7 with Bootcamp.
I've tried everything from all sources infos. Impossible to install.
After last screen on windows install, when desktop is created for first user and last boot ... black screen with blinking cursor.
I've been able to run this install from VMWARE from OSX. I've tried to install last version of ATI driver, bootcamp 3.2 ... nothing work.
I'm totally lost from 2 weeks now.
I could I proceed to boot windows 7 on I IMAC ?
Please help
This is an old problem I once ran into, but it's completely unrelated to SP1 which is the purpose of this thread.
Here is the solution:
http://support.apple.com/kb/TS3173

Overheating while using Windows XP with Bootcamp

Hi,
I bought a MacBook Pro last September 2009. The MacBook Pro came with Leopard but I installed Snow Leopard a couple of weeks later.
I need to use some Windows-based programs so I am using Windows XP with Bootcamp. However, I notice a high overheating when using Windows on Bootcamp (especially on the left side of the keyboard). Until now, the system doesn't crash but the overheating is a big problem for typing. This problem does not appear while I work on Snow Leopard.
Please, I would appreciate any help. I installed "SMCFanControl" but it only works under OS X (where there is not the problem). It doesn't control the fan on Windows under Bootcamp. Also, for this, I installed "SpeedFan" but it doesn't recognize the fans.
Thanks in advance.

A little solution that has helped me.
install both
Notebook Hardware Control (NHC)
http://www.pbus-167.com/nhc/nhc.htm#anchor_download
Notebook Hardware Control has a Max Battery setting when you right click on it's icon in the notification section on the task bar (lower right). Make sure to apply this setting.
and as suggested by Kappy
Input Remapper
http://www.softpedia.com/get/System/OS-Enhancements/Input-Remapper.shtml
This program allows you to adjust your fan speed without having to restart from Mac OS. Which is nice because with SMC if you close your macbook while running XP it will turn the fans off. Therefore you have to restart in Mac OS to turn the fan speeds back up.
The combination of the two has kept my cpu in the 65c range while heavy gaming and 45c at idle.
I have tried a lot of the ridiculous things that have been mentioned in both this thread and others. This solution has been an incredible relief because I certainly didn't want to get up every so often to run to the freezer or play over the air conditioner for several hours. I hope you have as much luck as I did.
My Mac is a late 2009 Macbook pro and I'm running XP in bootcamp.
Message was edited by: ensigne

Intermittent response of the trackpad in Windows 7 with Bootcamp 3.0

Hi all,
I have a problem with the trackpad (in macbook air). In Windows 7 with bootcamp 3.0, sometimes (more often after waking up from sleep) the trackpad does not response smoothly. It intermittently stops responding a few seconds and works again. When I plug in a USB mouse and use it, there is no such problem with the USB mouse. This problem only happens with the trackpad. I suspect this problem is caused by the bootcamp driver with Windows 7. Is there anybody who has the same problem?
Cheers,

Force a chkdsk
chkdsk C: /f
Change "C" to what your system drive is.
Boot from your system disk for Windows if it still happens.
Next step is to scan for bad blocks, then move on to recertify the drive.
But I would not be using the drive, and unless it is totally benign and erroneous, looking for a patch or fix. Definitely not from Windows Update.
I've had drives that really should be certified and extended test - in Windows - to look for bad sectors before using or installing a system.
If it is an issue with dual-boot and you shrunk Vista to make room, EasyBCD along with Windows DVD might help.
If something is interferring with shutdown and not writing out changes that are cached, might look in that direction.
Last, if you upgraded from Vista, maybe a custom clean install again. Backup your data with Windows Easy Transfer first and reinstall system and apps afterwards.
Maybe Windows backup image and restore, or Norton Ghost 15 comes out tomorrow. Not sure I'd trust WinClone, Windows 7 made changes, and there is now a 100MB system recovery partition... which I'm surprised it doesn't automatically ask to use.

HT3986 installing windows 7 with bootcamp It doesn't install, telling me that the partition made by bootcamp is not formatted in NSFT. What to do now?

after having made a partition for windows 7 with bootcamp, it couldn't be installed with the message that the partition needs to be formatted in NSFT.
What to do now?

Start again and follow the Bootcamp installation instructions http://www.apple.com/support/bootcamp/. You can print he instructions from within Bootcamp Assistant.

CHKDSK intermittent launching on booting (Windows 7 with Bootcamp 3.0)

Hi fella,
I recently downgraded from Windows 7 to Vista SP2 because my MBA had struggled with an annoying problem: Windows 7 with Bootcamp 3.0 intermittently launches CHKDSK on booting. I tested XP and Vista and realized that this problem happens only on Windows 7. I assume that Bootcamp 3.0 has a problem with Windows 7 in terms of managing GPT partition table (or maybe Windows 7 bug?). I hope this problem is solved in the next update of Bootcamp 3.X (for Windows 7) and would wait for an official release of the update. Anybody experienced the same problem?
Cheers,

Force a chkdsk
chkdsk C: /f
Change "C" to what your system drive is.
Boot from your system disk for Windows if it still happens.
Next step is to scan for bad blocks, then move on to recertify the drive.
But I would not be using the drive, and unless it is totally benign and erroneous, looking for a patch or fix. Definitely not from Windows Update.
I've had drives that really should be certified and extended test - in Windows - to look for bad sectors before using or installing a system.
If it is an issue with dual-boot and you shrunk Vista to make room, EasyBCD along with Windows DVD might help.
If something is interferring with shutdown and not writing out changes that are cached, might look in that direction.
Last, if you upgraded from Vista, maybe a custom clean install again. Backup your data with Windows Easy Transfer first and reinstall system and apps afterwards.
Maybe Windows backup image and restore, or Norton Ghost 15 comes out tomorrow. Not sure I'd trust WinClone, Windows 7 made changes, and there is now a 100MB system recovery partition... which I'm surprised it doesn't automatically ask to use.

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

I can't boot from the windows cd with boot camp

I got Vista up and running via boot camp but now I have a problem that could cause some issues. How the **** do you boot from a windows cd with boot camp!?!? When I stick in the windows based CD (could be the vista install CD -after vista's been installed of course- or a Windows home server restore cd) and hold down the option key I chose to boot from the CD in the menu then the screen goes black as it should and then it says press any key to boot from cd or dvd..... It gives me 5 seconds to press a key and then it conintues to boot into Vista. The thing is when it asks me to press any key I press any and all keys on the keyboard and I get no response and it just boots into vista. This can be quite a problem, what if I need to restore vista via the install CD? I can't chose to boot from it cause everytime it asks me to none of my key presses register. So everytime I have a problem I won't be able to restore or even diagnose it, I'll just have to reinstall vista? I don't think I can even bring up the safe mode or anything like this. The keyboard won't work until I reach the password screen of Vista. I've also tried plugging in a USB keyboard to it and it still doesn't work. So basically I need to know how to make the keyboard work before Vista loads.

Ok, well I just tried booting from the windows cd and it seems that I lied to ya It seems that you can boot from it. Although I only took it to the point I was comfortable with. The boot resulted in it asking me to install windows and I didn't see any partitions listed or anything, so I chickened out (so to speak) not wanting to take the chance of my Leopard installation getting screwed up.
It's been a quite some time since I used the Vista boot disc and can't really remember how it went when I used it in conjunction with boot camp beta. Sorry can't give you anymore information.

In 1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar shows 100% but task is still running. Where it says x of y items complete, x is y. This also happens in Windows 7 with Bootcamp. Please explain.

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

Reboot failure from cancelling windows setup with bootcamp!

Similar Messages

Maybe you are looking for