Reboot into Arch from Windows

I don't really know where this post belongs, so I put it in the "Newbie Corner" since I'm new.
Is it possible to add a menu entry, make a shortcut, make a script, or make a program in Windows (7) that will allow me to reboot into Arch without having to choose it in the GRUB menu?
Thanks,
Kaleb C.
Last edited by kac0802 (2011-07-14 02:19:35)

kac0802 wrote:
ngoonee wrote:
kac0802 wrote:
I think my menu.lst files are on a linux partition. If this is the case, I can't access it from Windows.
Is it possible to install grub on my Windows partition?
Its possible to access ext2/ext3 partitions from windows, google for it. I did it before, way back when I was still dual-booting.
Mine is an ext4 partition.
Grub is on the boot partition which will be ext2(Unless you specifically made it something else). Windows will be able to mount this fine and a script will be able to edit the Grub Menu before Windows shuts down.

Similar Messages

Can not reboot into OSX from Windows using Bootcamp assistant

I'm having a bit of a problem with rebooting into OSX from Windows on bootcamp. Clicking on the icon in the system tray produces a message that Windows can not find the OSX disk. Trying to open the Bootcamp preferences also generates an error. I have no problem getting back into OSX if I shut down Windows and restart the MacPro while holding down the option key. This is with a Windows 7 install on Bootcamp, but I had the same issue with a previous install of Win XP. I nuked and paved OSX and the WIndows disk between installs so my current problem is not carry over from the XP install.

My bad I should have been more clear. The problem is actually with a XP install via bootcamp, my Win 7 install is in VM Ware Fusion.
The XP install is on a second drive. Since you asked about this I'm assuming it may be the reason Im having problems.
The error is I get when trying to access bootcamp via the Windows control panel or by right clicking the sys tray icon is - "An error occured while trying to access the start up disk settings. You may not have privileges ...blah, blah, blah. I only created one account and I have enough privliges to change admin stuff in windows so I cant see privliges being the issue. I reassigned the OSX partition a new drive letter and rebooted windows but this didn't help.
The only drivers I installed, other then updating the video driver, are the bootcamp drivers
Sys tray icon - small diamond shapped icon in systray for accessing bootcamp functions.

When I try to sign into iCloud from Windows PC I get the message "You can't sign in because of a server error." When I check the iCloud status, all is Green.

When I try to sign into iCloud from Windows PC I get the message "You can't sign in because of a server error." When I check the iCloud status, all is Green. What is the fix?

Hi spillgar,
If you are having issues signing in to iCloud from your Windows machine, you may find the following articles helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
Regards,
- Brenden

Hi, Importing video into iMovie from Windows XP

HI, Can anyone give me advice or point me to an instruction manual on how to import videos from Windows XP into iMovie. I just bought a new iMac and would like to include some of my old videos. thanks!

Can anyone give me advice or point me to an instruction manual on how to import videos from Windows XP into iMovie.
I would probably use MPEG Streamclip (free) for this. There are versions for both Mac and PC platforms and if the PC version works the same as the Mac version, it will allow you to convert your files to DV, AIC, Motion-JPEG, MPEG-4, or H.264 video with Linear PCM, MPEG-4 (AAC), or other audio compression formats know to be accepted by iMovie '08.

Firefox carshes at startup no settings have changed. Latest version of FF. I just rebooted the computer from windows updates.

After reboot and installing windows updates etc. FF crashes all the sudden. No idea why. I have deleted all profiles completely, unintsalled ran ccleaner and reinstalled. nothing. Any ideas? I don't think windows updates effect FF. FF will not even open in safe mode and rests d not do anything all I can do is restart and close.
Thanks I appreciate anybody who can help. I have current anti malware and my pc is clean. Windows 7 64 bit. I use Webroot and that is temporarily disabled as I try to solve this.

Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!

How to delete the photo that had been sync into iphone from windows

I have sync my picture from
Computer into the iphone, the it automatically sync 2 same folder into the photo album. Im trying to delete it but cant, cant even find the file using the computer. Pls help

Are you talking about photo Library?
This is how Apple handles photos. ALL synced photos are in teh Photo Library. you can also access those exact same pics ( not duplicates) from the album which you selected to sync; just as your music is in your library and ca also be accessed via playlists.

Migrating from Windows Photoshop Elements to iPhoto '08

I recently got a Mac and I'm looking into migrating from Windows Photoshop Elements 6.0 to iPhoto 7 ('08).
I've seached this forum, but I didn't find any detailed tips, tricks and recommendations on how to do the migration. I know about the PE (Photoshop Elements) command to write keyword information into the files (something like File->write tags to file). Someone (IIRC Barbara B.) also mentioned something about scripts to make the transition smoother, although I haven't seen any detailed information on what and where these scripts are. Basically, I'd like to hear from users who have migrated from Windows Photoshop Elements. I have thousands of pictures and prior planning can save me lots of time.
Some questions:
1. Photoshop Elements has a tagging feature, which is similar to iPhoto's keyword feature. Not sure how iPhoto will process the keywords. Do I just import the pictures into iPhoto and iPhoto will recognize the keywords? Should I create the keywords in iPhoto ahead of time prior to import (using names that exactly match Photoshop tag names) ?
2. In PE, I've assigned captions to pictures. Can iPhoto read the captions and treat them as titles or descriptions?
3. In PE, I've assigned ratings to pictures. Can iPhoto read them, or do I need to manually redo the ratings in iPhoto?
4. One PE feature that I will really miss is hierarchical tags (e.g. Family->Kid's name). (Aside: everyone, please put in a request to Apple to support this feature!!) While I would prefer a native iPhoto feature to support hierarchical tags, I saw that there are 3rd party plugins available. What's the best one in terms of features and long term support/viability? Is it Keyword Manager?
5. Any easy way to translate my PE Album definitions when migrating to iPhoto? I assume I would need to recreate them from scratch based on keywords and optionally ratings?
6. I'm afraid to ask this next question (and I'm sure this is worthy of many separate threads). I'm still grappling with the concept of Events. In my mind, an event is something "monumental", and I've used Albums in PE for these "monumenal" events. A large percentage of my pictures don't really fit into a "monumental event" categary. Instead, they are pictures that were taken in a random/candid manner. Or, I might have pictures that are truly events, but maybe only 1 or 2 pictures would fit into an event. If I started using iPhoto from the very beginning, it may be easier to deal with the concept of events. However, I already have thousands of pictures. I'm wary of importing all my pictures in one shot (rather than on a per "event" basis), since it may result in hundreds of events, which, IMO, wouldn't provide much organizational value. Anyone have any tips/philosophical opinions on how to deal with events when thousands of pictures need to be imported? Someone (T.D.?) mentioned they organize by year for older pictures. Any suggestions?
Thanks!

randman
Can't answer all your questions, but I'll have a go at a couple.
1. Photoshop Elements has a tagging feature, which is similar to iPhoto's keyword feature. Not sure how iPhoto will process the keywords. Do I just import the pictures into iPhoto and iPhoto will recognize the keywords? Should I create the keywords in iPhoto ahead of time prior to import (using names that exactly match Photoshop tag names) ?
If you write the tags to the file then iPhoto will recognise them as part of the IPTC data. There is no way to create tags in advance.
2. In PE, I've assigned captions to pictures. Can iPhoto read the captions and treat them as titles or descriptions?
Can Elements write these to the IPTC data? If so, iPhoto should read them. A little trial will confirm.
3. In PE, I've assigned ratings to pictures. Can iPhoto read them, or do I need to manually redo the ratings in iPhoto?
No, the IPTC data does not recognise ratings.
4. One PE feature that I will really miss is hierarchical tags (e.g. Family->Kid's name). (Aside: everyone, please put in a request to Apple to support this feature!!) While I would prefer a native iPhoto feature to support hierarchical tags, I saw that there are 3rd party plugins available. What's the best one in terms of features and long term support/viability? Is it Keyword Manager?
Keyword Manager is the way to do this.
5. Any easy way to translate my PE Album definitions when migrating to iPhoto? I assume I would need to recreate them from scratch based on keywords and optionally ratings?
What do you mean by "album definitions"?
About Events:
Don't get hung up on a word. They could have as easily called them 'trousers' and it would make almost as much sense
An 'Event' is an import that is automatically divided into folders depending on the criteria you set in the iPhoto Preferences.
Events in the iPhoto Window correspond exactly with the Folders in the Originals Folder in the iPhoto Library package file (Right click on it in the Pictures Folder -> Show Package Contents).
You can move photos between Events, you can rename Events, edit them, create them, as long as you do it via the iPhoto Window. Check out the Info Pane (wee 'i', lower left) the name and date fields are editable. Edit a Event Name using the Info Pane, the Event Folder in iPhoto Library/Originals will also have the new name.
So, really an Event is a Folder.
For my money, Events are a very limited way of organising photos. They are strictly date and time based. As time goes by I consolidate them - Spring 06, Summer 07, America 08 (I do this as we have three cameras feeding the Library).
I organise using Albums, Smart Albums and Keywords.
Albums (Smart or otherwise) are virtual entities. Unlike Events, they reference files on the HD, so a pic can be in 1,10 or 100 Albums with no extra disk space used. (To have a pic in two events requires two copies of the files.) They are infinitely flexible and offer a much richer set of possibilities.
How have you your photos organised currently? In folders? On what basis? If you can explain how that works we may be able to help you recreate this system in iPhoto.
Regards
TD

Dual boot Windows 7 and Arch from 2 seperate drives (UEFI)

Hello everyone, I've been working on installing Arch to a secondary hard drive for the past few hours, but I am trying to make sure I won't mess up my Windows 7 install. I have found several topics talking about dual booting Windows 7 and Arch, but not a whole lot on booting them from separate drives. My drives are currently setup as follows.
sda (120GB SSD for Windows 7)
sda1 (100MB System Reserved NTFS partition)
sda2 (Windows 7 install)
sdb (1TB HDD for Windows programs, files, etc)
sdb1 (1TB NTFS partition)
sdc (1TB HDD)
sdc1 (boot 512MB FAT32)
sdc2 (root 500MB ext4)
sdc3 (home 300GB ext4)
sdc4 (swap 10GB)
rest unallocated "free space"
I used Gparted to create the partitions. I ended up getting hung up on the "Create Filesystems" sections, specifically this line"
# mkfs.fat -F32 /dev/sdXY
Now that I am looking at it, I'm thinking the "Create Filesystems" section maybe isn't necessary because I've used Gparted?
If it isn't necessary, when I get to the "mount the EFI System Partition to /boot" section, would I simply use
# mount /dev/sdc1 /mnt/boot
instead of
# mount /dev/sdXY /mnt/boot ?
The way I had this setup with Ubuntu was 3 partitions on sdc (/, home, swap) and I set my PC to boot to the sdc drive on startup. The boot loader would then give me the option to boot into Ubuntu or Windows 7, and I never had to alter the sda or sdb drives at all. Is this possible through Arch? My thinking is that even if it isn't, I should still be able to enter the BIOS boot menu and select which drive to boot manually correct? That wouldn't be too big of a deal for me because I spend 90% of my time in Linux, and only use Windows for Photoshop and gaming occasionally.
Thanks for taking the time to read this. I would have just tested this out, but I am afraid of messing up my Windows install.

After several sleepless hours I had to give up and go to bed about 5 hours ago. The installation process went smoothly (or so I thought). I followed the tutorial closely and upon rebooting I was met with a blinking cursor. After some googling I found others who said I should press TAB, but nothing seemed to work.
I rebooted to the iso disk and found the "boot installed OS" option and noticed it said "Press TAB to edit". I then found the boot parameters and tried everything from hd0 0 to hd4 4. I believe I have Grub setup correctly because every option besides hd0 0 either says "Booting..." and then gets stuck, or says "That disk and partition combination does not exist". So yea, I think hd0 0 is the correct boot path, it just gets stuck with the blinking cursor.
silverhammermba wrote:
You have the right idea. You want to install a bootloader on sdc1 which will be able to boot both Arch and Windows.
Your best bet would be to use something like rEFInd. It has a "scanfor" option that should automatically detect your BIOS-configured Windows installation and add a boot option for it. Note that depending on your motherboard, you may have to switch to UEFI-only mode and Windows will be unbootable without the assistance of a UEFI program which is backwards compatible with BIOS (like rEFInd).
Thank you for the link. Considering I can't get into my install and the actual install only took about 30 minutes, I think I am going to just start from the beginning again with REFIndr. It seems much simpler. I only used Grub because I've used it before with Ubuntu, but my very limited knowledge is telling me Grub is probably the problem.
MoonSwan wrote:Just an idea: My bios has a "Boot-up Prompt" which I can invoke when it's POSTing by hitting F11. This brings me to a menu that allows me to choose which drive I want to boot up that day. I use it when Syslinux isn't working properly (Which is right now as a matter of fact ...) in order to boot Windows so I can do some SCII, for example. I, too, dual-boot but I have both OSes on different SSDs. So my 120GB Crucial SSD has Arch on it and the 240GB Kingston has Windows, SCII, Portable Apps, etc and nary the two shall meet. It makes dual-booting easier in the case of a corrupt OS or MBR or what-have-you. You may want to give your Bios a better look to see if you can do the F11 trick. It probably can and will usually tell you so at POST by printing that information on-screen along with your drives-detected and other messages (I hit Pause sometimes to read all the POST messages).
This is exactly what I was talking about doing when I mentioned:
My thinking is that even if it isn't, I should still be able to enter the BIOS boot menu and select which drive to boot manually correct?
That's good to know, because even if this next install doesn't work I think if I pull the other drives I should be able to get it working fairly easily.
Thanks again everyone.

Black screen on reboot from windows to mac?

Hello,
A black screen is stalking me... I'd be much obliged if anyone can help.
The problem:
I have Windows 7 installed with Bootcamp. Every time I shut down / restart from Windows to get to the Mac side, the chime rings, but the screen stays black. I can tell the Mac is running though, because of the sound I hear when I press the volume up/down keys on the keyboard. Then, at some point (5 - 30 - 60 mins later) the computer decides out of nowhere it's time to unveil the desktop... This never happens when I reboot from the Mac side (unless I force shutdown while the black screen is still there).
Things I tried that didn't work:
- Command-Option-P-R to reset NVRAM (worked once but didn't fix it, and now when I try the screen stays black)
- Resetting SMC
- Apple Diagnostics came back with no issues found (when I restarted after the diagnostics, I got hit with the black screen again...)
- Erasing the Windows partition and reinstalling it.
Things I should probably mention:
The mac is a late 2013 iMac, Intel Core i5 with NVIDIA GeForce GT 750M, running OSX 10.9.1
I apologize if this has an obvious solution I somehow missed, or if it was answered in another post.
Thanks for your time.

One way is to wipe the iPod clean and use it as a hard drive to carry the files over to the new comptuer. You must format the iPod in what's called Fat32, the older formatting for DOS. If you do this on a Mac, you use the Disk Utility to Erase the disk, and you choose MS-DOS for the format.
Then you plug in the iPod to the Mac, drag the iTunes Music folder to the iPod disk. Then you plug it into the Windows machine and drag the files to your iTunes folder there. See some instructions here:
http://docs.info.apple.com/article.html?artnum=300173
On the other hand, you might try using a 3rd party program that takes songs off the iPod. But Windows doesn't read the Mac files, I bet they won't help you move the music cross-platform.
Hope this helps...

MacBook Pro won't sleep in OS X after reboot from Windows (again!)

This problem originally occurred about a year ago and no solution was found then but after a time, it simply went away. Well, now it's back: after a reboot into OS X (10.6.7) from Windows (7 Ultimate 64 Bit), my MacBook Pro refuses to sleep until rebooted a second time, after which it behaves correctly again. The Console log reports the following message: "System Sleep prevented by active remote login session (600 second threshold)". I've disabled Growl and DropBox (possible suspects last time) to no effect, reset the SMC and PRAM, all the usual things. I've tried when connected to mains power or battery, on wired, wireless or no network at all and still the same problem. Sleep behaviour under Windows is correct. Hopefully the problem will eventually cure itself as it did last time but I would like to discover the reason and find out what this "remote login session" could possibly be. To reiterate, this ONLY occurs immediately after rebooting from Windows.

Tried repairing BootCamp in 7, no change, don't think there was anything wrong with it in the first place.
Here is a section of the log after reboot from BootCamp and it says "System Sleep prevented by active remote login session (600 second threshold)". This ONLY happens after a reboot from Bootcamp, after another reboot all goes back to normal. What could the "active remote login session" be?
From log:
21/04/2010 23:08:56 kernel PM notification cancel (pid 16, configd)
21/04/2010 23:08:56 kernel IOPMrootDomain: idle cancel
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).
21/04/2010 23:12:00 configd[16] PowerManagement configd: tty sleep preventer: /dev/console
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
I have tried shutting down, closing tabs, with no success. What's going on and how can I fix it?
Thanks,
Cindi B
PS: I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

A Safari extension or third party plugin may be causing the menu bar issue.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
As for which OS X is installed.
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
v10.6 Snow Leopard v10.7 Lion v10.8 Mountain Lion
It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

HELP HELP REQUIRED!!!!!! Reading and Writing from and into a Telnet Window

Hi,
I need to read and write into a Telnet window .But the Telnet window is a exe program that is been given by the Windows while installing the OS. Another thing is that I need to read and write into/from the Telnet window at a specific X and Y positions which will be defined in the database . I did searched for a dll of Telnet which can contain some APIs to achieve the task but I was unable to fine one.
Even if u wont be able to provide me the perfect solution , Please guide me how to read and write from a executable window .
Any help will be highly appreciated.
Thanking in Advance.
Mannu26.

Hi Guys ,
Thanks for the comments , atleast I got few but none were of any use to me. If u can Please help me on this topic it will be very kind of you .
Take Care.
Manoj.

Why can't I drag and drop music from a folder on my PC into my iTunes window?

Why can't I drag and drop music from a folder on my PC into my iTunes window?
I have not found any article that has answered this question. They have come up with things like open the side bar and it will work, or you are using wrong format of music. Now this all happened when I upgraded to iTunes 10 and has not worked since and it worked fine before. Music format is correct, I have even gone as far as copying a file already in iTunes and trying to add it again. As soon as the files enters the frame of iTunes the music files icon the pointer is carrying turns into a circle with a slash through it.
ITunes Ver. is 11.1.5.5 Windows Ver. is Windows 8.1 Pro with Media Center
Files I have tried adding are standard MP3, 256 kbps purchased AAC Audio file, MP3 converted by iTunes into a 256 or 320 kbps AAC Audio file. None can be draged and droped but all can added by going to File/Add File to Library... or File/Add Folder to Library...
Add items from your computer to your iTunes library
Do either of the following:
1. Drag a file or folder from the desktop to the iTunes window.If you add a folder, all the files it contains are added to your library.
2. In iTunes, choose File > Add to Library, locate a file or folder, and click Open.
I can add files and folders by doing number 2 above but can not doing number 1
I have gone as far as uninstalling iTunes and reinstalling per apple procedures below.
Steps
1. Remove iTunes and its related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order or only uninstalling some of these components may have unintended effects.

I had this problem on Windows 8.1.1 and iTunes 11.2.2.3
To resolve it from within Itunes I did : Edit, Preferences, Sharing.
I took the tick out of "Share my library on my local network"
Click OK.
Closed iTunes/
Reopened iTunes and I can drag and drop.
I went back into Edit, Preferences, Sharing and put the tick back and clicked OK.
Works fine now.

I updated from windows xp to windows 7 and can not get into my itunes account. I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one. How do I get to my itunes?

I updated from windows xp to windows 7 and can not get into my itunes account. I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one. How do I get to my itunes?

Take a look at Apple's document for authorizations -> iTunes Store: About authorization and deauthorization.
You can deauthorize all computers from iTunes. All you have to do is click iTunes Store, click your account name in the upper right corner of iTunes, then deauthorize all.

Reboot into Arch from Windows

Similar Messages

Maybe you are looking for