Reboot laptop back to factory settings using control panel
can someone please tell me how to get my compouter back to factory settings using the control panel. i think i may have downloaded somthing thats making my laptop messed up and i dont have a clue on what to do. help please!
Click Start , All Programs , Recovery Manager .
Or,just do it from boot. Immediately after powering on the laptop start tapping away at the F11 key.This should boot into Recovery Manager where you can choose to do a Factory reset.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**
Similar Messages
-
My Ipod classic is not being recognised by windows Vista (device not recognised in device manager) and therefore I can only buy from Itunes but unable to sync etc
I had to set laptop back to factory settings. everything else working perfectly except this. Have tried changing usb but still device not recognised!!!!
Any help would be appreciated???
going quietly insane..Hello Sparkysun,
Thanks for using Apple Support Communities.
From your post, the issue appears to be indicative of a hardware issue. The support link below explains your service options:
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Take care,
Alex H. -
I recently had to set my laptop back to factory settings, thus had to reinstall Itunes. I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod. Is there someone out there that can help me out? I would appreciate it!
Hi NYYJMM,
Thanks for visiting Apple Support Communities.
You may want to reset your iPod nano and then sync again. If the issue persists, restore your iPod and try again. See these articles for the steps:
How to reset iPod
http://support.apple.com/kb/ht1320
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Best Regards,
Jeremy -
Need to restore my laptop back to factory settings
Hi all - looking for some help please.
The HDD in my G575 laptop has failed - think the laptop ran out of battery during a Microsoft update, so that might be the issue.
I want to take the laptop back to factory settings. I don't have restore disks created - but I do have a loan of my friends laptop which is identical, so I can burn disks from that.
However - I am not sure how to do it. What steps do I need to take? Can anyone guide me please?
Thanks.
Solved!
Go to Solution.Hi mickyd67 and welcome to the community,
Here's a guide with a link to a video.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
I had to bring back my laptop to factory settings and have tried to re-load PS CS4 and now the serial number is not recognised. I have explained this to Adobe and they say they do not recognise the serial number, but they did recognise it the first time around when I initially registered it? I think it may be something to do with deactivating and reactivating between different laptops and PCs because of the licence. I cannot deactivate as I am unable to access Photoshop to do so.
I have actually found my purchase details off Amazon, as Adobe suggested, but I am unsure where I should send this information to as Adobe have not come back to me? I am based in the UK.
I am hoping that someone can please help me.
Many thanks
RhianHi Curt
What if I've purchased it off Amazon, will that make a difference? -
I have recently reset my laptop to factory settings and whilst doing so have lost my music files. I have uploaded my cds but am having trouble moving music from my ipad mini back to music file or itunes.
iTunes sync is one way from iTunes library to an iOS device.
You will need third party software such as TouchCopy to transfer from iOS to your computer. -
I have recently had to reset my laptop to factory setting and wasnt able to backup any of my downloads, i have tried to download my music and videos however it keeps saying that i have already downloaded them, does anyone know if i can re download them ?
Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer. -
I went to the Genius bar and they told me to Control, Option, P, R on a reboot to restore the settings, but with a wireless KeyBoard it does not work. I installed my standard PC keyboard, but am not sure what keys renase the display back to factory settings.
Hello Dominique,
Generally on a PC Keyboard...
Windows key = Command key on Mac
alt key = Option key on Mac
PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238
With PC KB... Windows+alt+p+r
But try holding the Shift key down at boot to get into Safe Mode, see if the Display settings need adjusting. -
I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?
Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.
-
can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3
Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.
-
bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???
You can bypass the password and wipe the drive and return to the original facory installation if the seller included the orginal install DVDs with the Mac mini. If not you will need a retail version of Mac OS X. To boot from the Install DVD restart the mini, immediately slip in the DVD and press and hold the C key.
-
I'm needing help restoring an iPod touch 5 back to factory settings because I purchased it used
I'm needing help in restoring an iPod touch 5th generation back to factory settings. Because I purchased it used from a family member who can not remember their password or sercuity question answers
They need to call AppleCare, ask to be transferred to the Account Security team.
-
We reset back to factory settings. After a few attempts we found an email we could use to set up as Apple ID. Everything was working great. Now it has pulled up one of the email addresses we tried to use, and is trying to verify, and asking to continue to complete the set up. It gets to a certain page, and stays there, won't let us get out of the page. We shut down the iPad, but it came back to the same thing, when it restarted. What do we do to stop this?
You will need another iOS device or a computer in order to do this, but I assume that's not a problem since you are on this forum.
see if you can change the ID using the instructions here.
Apple ID: Changing your Apple ID
Did you try starting all over again to see if you can start from scratch now? -
Satellite C660-1LD: How to recover and go back to factory settings
Hi Guys,
I am suffering with some problem on any website some words linked and when I click it, a ad. website opens which is kinda virus i think and the laptop works very slowly
I decided t reboot the laptop and go back to factory settings.
Could you please help me how to reboot I am not really good at computering so if you explain step-by-step That would be fantastic.
Thank youHi
Read the threads here in the Toshiba Product Recovery forum.
Additionally check this documentation how to use the HDD recovery:
+How to recover a Toshiba notebook with the HDD recovery procedure+
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm -
My macbook pro is slow / freezing even after going back to factory settings
my mac book pro is slow even after going back to factory settings.....
What do i do next its driving me insane!
its 2010 macbook pro running mountain lion
- cpu is peaking with just a single web page open
- laptop is pretty hot
- cant watch any films or online videos
- cursor is lagging on screen
- disc usage is 5% / 95% free!
- system memory = half free, so 2gb out of full 4gb i have
If anyone has any ideas of whats possibly wrong please let me know ur thoughts
Am beginging to think its possibly damage to my harddrive nowStart with a SMC reset:
http://support.apple.com/kb/ht3964
Run an Apple hardware test.
http://support.apple.com/kb/ht1509
You may have to use OPTION D to start it.
Take a look at Activity Monitor, set to 'All Processes' for possible clues.
Look at these two user tips:
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.
Maybe you are looking for
-
Form won't submit - what's wrong with my code?
Hi guys, I adapted this form from one that sits on a secure server. It works fine here: https://supersecure.co.nz/users/9ba5/215/functionbooking.html I thought I had changed the submit code correctly but nothing happens when you click submit. What ha
-
Hy Guys I've problem with SPDIF audio out, when i plug optical cable + adapter to jack, then relatek manager show that is plug only analog audio out like a screen: I've latest drivers from MSI site. What is wrong?
-
Black Thumbnails After Importing Scanned Picures
Last week I begun to scan all my analog photos. The first 24 pictures scanned in RGB, saved as JPEG 8, imported in iPhoto - great! Second round, nothing changed except the Mac OS X 10.5.2 update, all scanned pictures that I try to import to iPhoto en
-
incase if u r table is client dependent how the end user will access the data?
-
I cannot send the email to the printer using my hotmail account.
I got HP laserjet pro M1536 printer which have an eprint capability but i cannot send the mails to the printer by using the hotmail account and even tried using others hotmail account but in vain. I can send the emails thru yahoo and gmail accounts t