Reboot loop after software update

My phone is also in constant reboot loop since the update. I tried deleting app after app with no luck. What is going on? Is there anything I can do? I also have tried the master reset, I highlighted recovery pressed the volume up and it went into reboot loop mode again. Any suggestions??

I know its frustrating to have a phone that is rebooting constantly Jimlpn. I'm sorry the steps provided in the other thread did not work. Is your phone damaged? Replacing the phone may be the next step. You can also take your phone to a corporate store location for a hands on evaluation. Is your phone under the 1year manufactures warranty and do you have insurance?
KinquanaH_VZW

Similar Messages

Stuck in Restart Loop after Software Update

I recently ran the update to 10.5.3 a few days ago, and thankfully, it's been working great... until today, when I installed two seemingly innocuous updates via Software Update: one for the latest version of Quicktime and another for Apple Brother Print Drivers 1.1. After restarting, everything fell apart. Several of my start-up apps unexpectedly quit after login, and other apps either failed to launch when I tried opening them, or they simply got stuck in an endless loop of bouncing in the dock. I couldn't even force-quit them because they weren't responding at all. Thinking this strange behavior to be symptoms of some permissions issue, I popped in the Leopard installation CD and ran a permissions repair. It fixed several cryptic problems, one for something to do with Java and another for the cups folder, which I assume has some relation to the printer driver update. I then tried selecting my start-up disk and restarting, but the problem only got worse. Now my iMac is stuck in a restart loop. I tried booting in safe mode, but that hasn't worked. If worse comes to worst, I'll have to revert to a Time Machine backup, or else run an Archive & Install, but I'm trying to avoid that. Any suggestions? I'm also curious to know if these two updates had any relevance to these problems, and if so, what the cause may be. I'm thinking the printer driver is to blame, but then again that's only a stab in the dark. Any help would be appreciated. Thanks!

Thanks for the suggestions. I tried a Safe Boot again but unfortunately that didn't work, so I had to go ahead and do an Archive & Install. Now everything is up and running; however, I'm going to stay away from that print driver until I figure out exactly what went wrong. I did a little research and saw it listed on MacUpdate.com, where it was posted along with an interesting note: apparently, the update can only be applied if there is already a Brother print driver installed (in this case there was), and in addition to that, the printer must either be connected (and I assume on for the computer to know it's connected in the first place) or have an active print queue for the update to even be listed in Software Update. Strangely enough, neither of these conditions held true when I saw it in Software Update... so I think that might have been the cause, but I can't be sure. I was wondering if anyone else has installed this update successfully, and if so, what they did?
Thanks again for the suggestions.

Reboot fails after software update - what now?

I've just performed a regular software update. I think it included the following 4 items:
- iPhoto 08 (enhanced printing etc.)
- Raw module update
- 10.5.5 update
- ??? don't remember this one
Three of the updates required a reboot so I opted to reboot immediately after installation.
Unfortunately I do not get beyond the white screen. I don't even get to the apple logo screen? Is there any way to restore without doing a reinstallation of the OS?
This is the first time I'm running into serious issues like this
Any help appreciated.
Thanks,
Olaf

flatpicker wrote:
I've just performed a regular software update. I think it included the following 4 items:
- iPhoto 08 (enhanced printing etc.)
- Raw module update
- 10.5.5 update
- ??? don't remember this one
Three of the updates required a reboot so I opted to reboot immediately after installation.
Unfortunately I do not get beyond the white screen. I don't even get to the apple logo screen? Is there any way to restore without doing a reinstallation of the OS?
This is the first time I'm running into serious issues like this
Yes, I stopped doing multiple updates, esp. those requiring a reboot. I do the one-at-a-time now, and for the major updates, I do them manually from the Apple download page.
You have what I call a "stuck" update and what usually clears it is a safe boot.
Boot into the safe mode by holding down the shift key during boot. At the login screen just click restart and see if the system boots normally (it usually does) and see if all the DLs installed.
Post back either way. We never give up

Windows Update Agent rebooting systems after Software Update deployment

I have a software update deployment that is configured to install software updates on a collection of servers at 4:00 AM with a suppressed reboot. The updates get deployed and no reboot occurs as expected. Then ~8 hours later WUA starts up and the
servers get rebooted.
There is a maintenance window applied to the collection from 4:00 AM to 6:00 AM to allow the updates to install.
I've read a few forum and blog posts on this issue and have implemented some settings via GPO, but the reboots are still occurring. The settings that were applied are referenced in the link below.
https://support.microsoft.com/kb/2476479?wa=wsignin1.0
Here is a snippet from the WindowsUpdate.log:
2014-10-22 12:00:26:153 1428 8a88 AU Received AU Resume timeout
2014-10-22 12:00:26:153 1428 8a88 AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-22 12:00:26:153 1428 8a88 AU Can not perform non-interactive scan if AU is interactive-only
2014-10-22 12:02:08:512 1428 8a88 AU AU received policy change subscription event
2014-10-22 12:16:43:463 1428 8a88 AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-22 12:16:43:479 1428 8a88 WuTask Uninit WU Task Manager
2014-10-22 12:16:43:697 1428 8a88 Service *********
2014-10-22 12:16:43:697 1428 8a88 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-22 12:16:43:697 1428 8a88 Service *************
2014-10-22 12:19:29:728 1428 e584 Misc =========== Logging initialized (build: 7.8.9200.16604, tz: -0400) ===========
2014-10-22 12:19:29:728 1428 e584 Misc   = Process: C:\WINDOWS\system32\svchost.exe
2014-10-22 12:19:29:728 1428 e584 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-10-22 12:19:29:728 1428 e584 Service *************
2014-10-22 12:19:29:728 1428 e584 Service ** START ** Service: Service startup
2014-10-22 12:19:29:728 1428 e584 Service *********
2014-10-22 12:19:29:744 1428 e584 Agent   * WU client version 7.8.9200.16604
2014-10-22 12:19:29:744 1428 e584 Agent   * Base directory: C:\WINDOWS\SoftwareDistribution
2014-10-22 12:19:29:744 1428 e584 Agent   * Access type: No proxy
2014-10-22 12:19:29:744 1428 e584 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-10-22 12:19:29:744 1428 e584 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2014-10-22 12:19:29:744 1428 e584 Agent   * Network state: Connected
2014-10-22 12:19:29:744 1428 e584 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-10-22 12:19:29:744 1428 e584 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2014-10-22 12:19:29:791 1428 e584 Agent *********** Agent: Initializing global settings cache ***********
2014-10-22 12:19:29:791 1428 e584 Agent   * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-10-22 12:19:29:791 1428 e584 Agent   * WSUS server:
http://Internal-WSUS.Domain:8530
2014-10-22 12:19:29:791 1428 e584 Agent   * WSUS status server:
http://Internal-WSUS.Domain:8530
2014-10-22 12:19:29:791 1428 e584 Agent   * Target group: (Unassigned Computers)
2014-10-22 12:19:29:791 1428 e584 Agent   * Windows Update access disabled: No
2014-10-22 12:19:29:791 1428 e584 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-10-22 12:19:29:806 1428 e584 WuTask WuTaskManager delay initialize completed successfully..
2014-10-22 12:19:29:822 1428 e584 Report CWERReporter::Init succeeded
2014-10-22 12:19:29:822 1428 e584 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-10-22 12:19:29:822 1428 e584 DnldMgr Download manager restoring 0 downloads
2014-10-22 12:19:29:838 1428 e584 AU ########### AU: Initializing Automatic Updates ###########
2014-10-22 12:19:29:838 1428 e584 AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-22 12:19:29:838 1428 e584 AU AIR Mode is disabled
2014-10-22 12:19:29:838 1428 e584 AU   # Policy Driven Provider:
http://Internal-WSUS.Domain:8530
2014-10-22 12:19:29:838 1428 e584 AU   # Detection frequency: 22
2014-10-22 12:19:29:838 1428 e584 AU   # Approval type: Disabled (User preference)
2014-10-22 12:19:29:838 1428 e584 AU   # Auto-install minor updates: No (User preference)
2014-10-22 12:19:29:838 1428 e584 AU   # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-install notify)
2014-10-22 12:19:29:838 1428 e584 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-22 12:19:29:838 1428 e584 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-10-22 12:19:29:853 1428 e584 AU AU finished delayed initialization
2014-10-22 12:19:29:884 1428 e584 AU #############
2014-10-22 12:19:29:884 1428 e584 AU ## START ## AU: Search for updates
2014-10-22 12:19:29:884 1428 e584 AU #########
2014-10-22 12:19:29:884 1428 e584 Agent SkipSelfUpdateCheck search flag set for serverId: 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782
2014-10-22 12:19:30:416 1428 e584 Report *********** Report: Initializing static reporting data ***********
2014-10-22 12:19:30:416 1428 e584 Report   * OS Version = 6.2.9200.0.0.197008
2014-10-22 12:19:30:416 1428 e584 Report   * OS Product Type = 0x00000008
2014-10-22 12:19:30:416 1428 e584 Report   * Computer Brand = HP
2014-10-22 12:19:30:416 1428 e584 Report   * Computer Model = ProLiant BL460c Gen8
2014-10-22 12:19:30:416 1428 e584 Report   * Platform Role = 1
2014-10-22 12:19:30:416 1428 e584 Report   * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Revision = I31
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Name = Default System BIOS
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Release Date = 2014-02-10T00:00:00
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Sku Number = 641016-B21
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Vendor = HP
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Family = ProLiant
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Major Release = 255
2014-10-22 12:19:30:431 1428 e584 Report   * Bios Minor Release = 255
2014-10-22 12:19:30:431 1428 e584 Report   * Locale ID = 1033
2014-10-22 12:19:30:431 1428 e584 AU <<## SUBMITTED ## AU: Search for updates [CallId = {2787252C-D4B8-46B5-BB42-0C616042113C} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:30:431 1428 dae0 Agent *************
2014-10-22 12:19:30:431 1428 dae0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-22 12:19:30:431 1428 dae0 Agent *********
2014-10-22 12:19:30:431 1428 dae0 Agent   * Online = No; Ignore download priority = No
2014-10-22 12:19:30:431 1428 dae0 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-22 12:19:30:431 1428 dae0 Agent   * ServiceID = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} Third party service
2014-10-22 12:19:30:431 1428 dae0 Agent   * Search Scope = {Machine & All Users}
2014-10-22 12:19:30:431 1428 dae0 Agent   * Caller SID for Applicability: S-1-5-18
2014-10-22 12:19:30:494 1428 dae0 Agent   * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
2014-10-22 12:19:30:494 1428 dae0 Agent *********
2014-10-22 12:19:30:494 1428 dae0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-22 12:19:30:494 1428 dae0 Agent *************
2014-10-22 12:19:30:509 1428 d158 AU >>## RESUMED ## AU: Search for updates [CallId = {2787252C-D4B8-46B5-BB42-0C616042113C} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:30:509 1428 d158 AU   # 0 updates detected
2014-10-22 12:19:30:509 1428 d158 AU #########
2014-10-22 12:19:30:509 1428 d158 AU ## END ## AU: Search for updates [CallId = {2787252C-D4B8-46B5-BB42-0C616042113C} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:30:509 1428 d158 AU #############
2014-10-22 12:19:30:509 1428 d158 AU All AU searches complete.
2014-10-22 12:19:30:525 1428 e584 AU #############
2014-10-22 12:19:30:525 1428 e584 AU ## START ## AU: Search for updates
2014-10-22 12:19:30:525 1428 e584 AU #########
2014-10-22 12:19:30:525 1428 e584 AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-install notify} added to AU services list
2014-10-22 12:19:30:525 1428 e584 Agent SkipSelfUpdateCheck search flag set for serverId: 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782
2014-10-22 12:19:30:525 1428 e584 AU <<## SUBMITTED ## AU: Search for updates [CallId = {A3E41A4C-E9CB-4172-B6B0-99D556FB9102} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:30:525 1428 dae0 Agent *************
2014-10-22 12:19:30:525 1428 dae0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-22 12:19:30:525 1428 dae0 Agent *********
2014-10-22 12:19:30:525 1428 dae0 Agent   * Online = Yes; Ignore download priority = No
2014-10-22 12:19:30:525 1428 dae0 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-22 12:19:30:525 1428 dae0 Agent   * ServiceID = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} Third party service
2014-10-22 12:19:30:525 1428 dae0 Agent   * Search Scope = {Machine & All Users}
2014-10-22 12:19:30:525 1428 dae0 Agent   * Caller SID for Applicability: S-1-5-18
2014-10-22 12:19:30:525 1428 dae0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2014-10-22 12:19:30:541 1428 dae0 Misc Microsoft signed: Yes
2014-10-22 12:19:30:541 1428 dae0 Misc Infrastructure signed: Yes
2014-10-22 12:19:30:556 1428 dae0 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://fe2.ws.microsoft.com/w81/2/redir/v2-storeauth.cab"
2014-10-22 12:19:30:588 1428 dae0 Agent Checking for updated auth cab for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782 at
http://fe2.ws.microsoft.com/w81/2/redir/v2-storeauth.cab
2014-10-22 12:19:30:588 1428 dae0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\117cab2d-82b1-4b5a-a08c-4d62dbee7782.cab:
2014-10-22 12:19:30:603 1428 dae0 Misc Microsoft signed: Yes
2014-10-22 12:19:30:603 1428 dae0 Misc Infrastructure signed: Yes
2014-10-22 12:19:30:775 1428 dae0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\117cab2d-82b1-4b5a-a08c-4d62dbee7782.cab:
2014-10-22 12:19:30:791 1428 dae0 Misc Microsoft signed: Yes
2014-10-22 12:19:30:791 1428 dae0 Misc Infrastructure signed: Yes
2014-10-22 12:19:30:791 1428 dae0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\WuRedir\117CAB2D-82B1-4B5A-A08C-4D62DBEE7782\wuredir.cab:
2014-10-22 12:19:30:806 1428 dae0 Misc Microsoft signed: Yes
2014-10-22 12:19:30:806 1428 dae0 Misc Infrastructure signed: Yes
2014-10-22 12:19:30:822 1428 dae0 EP Got 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 redir Client/Server URL: "https://fe2.ws.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-22 12:19:30:978 1428 dae0 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-10-22 12:19:30:978 1428 dae0 PT   + ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}, Server URL =
https://fe2.ws.microsoft.com/v6/ClientWebService/client.asmx
2014-10-22 12:19:31:025 1428 dae0 Agent   * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
2014-10-22 12:19:31:025 1428 dae0 Agent *********
2014-10-22 12:19:31:025 1428 dae0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-22 12:19:31:025 1428 dae0 Agent *************
2014-10-22 12:19:31:025 1428 d158 AU >>## RESUMED ## AU: Search for updates [CallId = {A3E41A4C-E9CB-4172-B6B0-99D556FB9102} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:31:025 1428 d158 AU   # 0 updates detected
2014-10-22 12:19:31:025 1428 d158 AU #########
2014-10-22 12:19:31:025 1428 d158 AU ## END ## AU: Search for updates [CallId = {A3E41A4C-E9CB-4172-B6B0-99D556FB9102} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
2014-10-22 12:19:31:025 1428 d158 AU #############
2014-10-22 12:19:31:025 1428 d158 AU All AU searches complete.
2014-10-22 12:19:31:025 1428 d158 AU AU setting next detection timeout to 2014-10-23 14:19:28
2014-10-22 12:19:36:025 1428 e214 Report REPORT EVENT: {E04012FD-8FFD-4259-96D5-A5A34127F0A0} 2014-10-22 12:19:31:025-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software
Synchronization Windows Update Client successfully detected 0 updates.
2014-10-22 12:19:36:025 1428 e214 Report CWERReporter finishing event handling. (00000000)
2014-10-22 12:29:29:914 1428 e584 AU AU invoking RebootSystem (OnRebootNow)
2014-10-22 12:29:30:055 1428 e584 AU Allowing auto firmware installs at next shutdown
2014-10-22 12:29:30:102 1428 e584 Misc WARNING: SUS Client is rebooting system.
2014-10-22 12:29:30:102 1428 e584 AU AU invoking RebootSystem (OnRebootRetry)
2014-10-22 12:29:30:367 1428 e584 Shutdwn Checking to see whether install at shutdown is appropriate
2014-10-22 12:29:30:367 1428 e584 Shutdwn user declined update at shutdown
2014-10-22 12:29:30:367 1428 e584 AU AU initiates service shutdown
2014-10-22 12:29:30:367 1428 e584 AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-22 12:29:30:399 1428 e584 WuTask Uninit WU Task Manager
2014-10-22 12:29:30:445 1428 e584 Agent Sending shutdown notification to client
2014-10-22 12:29:30:445 5788 8084 COMAPI WARNING: Received service shutdown/self-update notification.
2014-10-22 12:29:30:461 1428 e584 Report CWERReporter finishing event handling. (00000000)
2014-10-22 12:29:30:539 1428 e584 Service *********
2014-10-22 12:29:30:539 1428 e584 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-22 12:29:30:539 1428 e584 Service *************
Any assistance is appreciated.
-Tim

Hi,
Any update?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Reboot problems after software update

Hi,
Background: within the last week I have moved to wireless with the AEBS.
Tonight a window popped up on screen telling me of 6 available software updates. I decided to go ahead and install them. Like the fool I am I did not check what they were for, but I did notice one was for airport utility I think.
I am running Tiger 10.1.4 (i think) on a Powerbook G4. Immediately after dowloads completed I was asked to restart. I tried but could not shut down as airport utility would not quit regardless of how many times i tried "locations; force quit'. Eventually I went for the power button.
Now I cannot restart the mac. I get to the blue screen and window which shows the progress bar but no progress is ever made. I hear no chime on start up and cannot even boot up in safe mode. I have also tried booting from disk but nothing.
Any help most greatly appreciated!

Find a friend with a Mac. In target Mode, see if your machine mounts to his. If it does, run Disk Utility, and Disk Warrior, then run the airport, and maybe the 10.4.9 combo updates again.

Reboot hangs after software update

Hi,
Sometimes when I use the Software Update utility and the computer requires a restart, it restarts normally. But other times (e.g. after the most recent update), on restart it "hangs" at the white screen. (Yes, I do hear the startup chime as expected; then it hangs.)
I've let the computer sit there for a while, figuring that maybe it had to process something, but even after an hour it still is at the same point. If I hold down the power button to shut the computer off and then restart, it seems fine again.
Is this normal? If it's not, any guesses as to what may be happening and what I can do to fix it?
thanks!
Fran

The following generally seems to keep me out of trouble:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

IPad 3 reboot loop after iOS update

Hi,
I have updated my iPad 3 to the last 6.1.2 version and since then it just reboots automatically every two minutes.
I have tried to restore it but now it is impossible to activcate the device from my Wifi or even when connected to iTunes ( it says it can't connect to apple server). In the mean time the iPad just keeps on rebooting every so often.
What to do?

Try this:
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ????

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ???? AT&T my DSL carrier suggests I get a new router. Apparently the one I have is really old and doesn't support my Macbook Pro. Does this sound right?

If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
One for entering into devices, computers etc for Internet Access Only.
You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
Also if you give out the password to another, they can't hack the network with the guest access password.
Computers remember the internet password, so anyone with access to your machines or network will have the password.
Since you have another Admin only password, they can't hack in. got it?
You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
Good luck.

After software update, required reboot results in grey screen with spinning wheel, cannot get out of it.

How do I get out of a spinning wheel after a reboot from a software update?

Talked to apple about this... The suggested fix is to boot holding Command-R and choose re-install.... I know.... I've never had to reinstall OSX; I thought that type of fix was limited to the Windows world.
Oh well, I guess apple developers aren't perfect after all.
Good luck!
Sorry... this posted to the wrong thread by accident...

HT6114 Reboot loop after 10.9.2 upgrade

My 2009 (dual-quad) Mac Pro 4,1 is now stuck in a reboot loop after upgrading from 10.9.1 to 10.9.2.
//edit: I realized there wasn't a question: What is wrong with my computer and how do I fix it?
So far I have tried:
* Repairing the disk
* Repairing permissions
* Zapping the NVRAM/PRAM
* Resetting SMC
* Copying BootCache.playlist from a backup to /var/db
Other things to note about my setup:
In addition to the original hard drive, I installed a 4tb drive from which I have been working with since June. It is the 4tb drive that has 10.9.2 installed. The original 650gb still has 10.8.4 installed and all my original data pre-June.
Also installed is a VisionTek Radeon 7870 video card which powers my numerous monitors. I do not recall having to install anything extra, or modify any settings to get it to work. The only downside is you can't really see anything when booting.
In addition to the VisionTek card I also have one of the factory Geforce 120 cards installed. Using another monitor attached to that card I've been able to monitor the boot process using the command-v verbose output.
Of notable interest I get the dreaded "BootCache: unable to open /var/db/BootCache.playlist : 2" error, along with a few SMC errors. If these are important I can attach pictures taken of the boot process.
I am able to zap the NVRAM and boot the old 10.8.4 650gb drive. It loads fine. 10.9.2 will not boot into safe mode, but will boot into recovery mode.
As a final attempt to fix the BootCache error I copied it from a Time Machine backup into /var/db/ ensuring the correct permissions were set. After rebooting the file is deleted again.
I would greatly appreciate any help on this issue as this is my work computer. I do have full backups via Time Machine so I can reinstall, but I'm hoping there's another solution.

I just started a discussiion related to this topic in "Mac Pro."
https://discussions.apple.com/message/25019730#25019730
" I have a 2009 dual quad core Mac Pro (4.1) with an upgraded Radeon 7950 GPU. I use a 30" Apple Cinema display (DVI) and a 27" LED Cinema Display (Display Port). After updating to 10.9.2, the Mac would not boot, but went on a continuous re-boot cycle every 5-10 minutes without a flicker of life in either display. I unplugged both displays and the Mac booted. I could log in remotely from my laptop. I then attached the 30" Cinema Display into the DVI port and the Mac booted normally."
Dave

IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
I don't have Apple Care, what to do? Spend more money and buy a new phone?

Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
I myself, two days ago purchased a 2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
SHAME ON YOU!

After software update apple rv light flashing and not coming on

After software update my apple tv did not come on and light is flashing I tried in pluging and all what next for me

It was probably applying the update and rebooting, unless it had doin it for awhile?. You will need to grab a micro usb cable and restore in iTunes
http://support.apple.com/kb/HT4367

TS3274 iPad 2 Auto-rebooting continuously after OS update to iOS 7

My iPad 2 is auto-rebooting continuously after OS update to iOS 7 . After every reboot , it is waking up for around 20 seconds and then rebooting again with apple logo coming on the black screen . I tried switch-off/on but the problem is still there . Please tell what to do .
PS : The iOS update was completed successfully . The General>Software-Updates shows "up to date iOS 7" .

I somehow managed to restore the ipad within 20 seconds time . I erased all settings and data by General>Reset>Erase-All-Settings-And-Data (simply reset settings did not work) . Make sure you have backup of your data (on iCloud or iTunes) before doing the previous step . Thank god , now it is working fine . *** Apple !!

Hard drive runs all the time after software update

After a software update from Apple a couple of weeks ago, for some reason the hard drive now runs noisily and continuously ever since. It's never run that way in the 3 years I've had the machine. It would run briefly sometimes while using some websites, but it would always stop and quiet down once the site was done. Anybody else had this happen? Thanks - L Agnew.

Hi,
Make sure you have enough available drive space for updates. Right click your MacintoshHD icon and then click Get Info. In the Get Info window, where it says: General click the black arrow so it faces down. You will see Capacity and Available. Watch that the available drive space never falls below 15% of the total drive. (Some say 10%, but that's pushing it). Not enough drive space will cause apps to crash and freeze, including browsers.
If drive space is the issue, you need to copy files to external source. Don't forget to delete the originals on the hard disk.
If drive space isn't an issue try deleting this file. com.apple.softwareupdate.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot. Launch Software Update either from the Apple Menu or the System Preferences/Software Update pane.
Carolyn

USB Audio stopped working on 27" ACD after software update 1.0

Hi all,
My 27" ACD worked flawlessly until I installed 27-inch LED Cinema Display Software Update 1.0 earlier tonight. I have a unibody MacBook Pro that doesn't output audio from the mini displayport, when I got the ACD Friday, USB audio output worked fine. I also have a 24" ACD and audio worked fine on that as well. But after software update 1.0, I can no longer get audio output of the 27" ACD to work via USB, I even rebooted my Mac and it still doesn't work. After trying it a few times in Sound.prefPane, I now can't even select the "Display Audio - USB" option (when I click on it it reverts to the other option right away).
From /var/log/system.log, I believe this is the error related error message:
System Preferences[332]: Error ^P trying to set sOut device to 264
Message was edited by: ayn

I have this problem too. I have the 27-inch LED cinema display connected to my Mac Pro 1,1 via the Radeon 5770. I also suspected it had something to do with the machine going to sleep, but the audio doesn't disappear every time it goes to sleep. Unplugging the monitor fixes the problem.
I also noticed that when the sound has went away, if I try to change the volume there will be a long delay before seeing the volume-change graphic. Also, toggling the sound device in System Preferences while the problem is in effect is unresponsive, sometimes giving the beach ball. Finally, this message is seen in console logs when the sound has went away:
10/19/10 6:01:22 PM kernel USBF: 75053.200 AppleUSBEHCI[0xf3d0800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 5, EP: 0)
I can make this message appear on demand by attempting to change the volume.
If (when) this happens again, I'm calling support.

Reboot loop after software update

Similar Messages

Maybe you are looking for