Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

Similar Messages

PS2 mouse with MSI K8N Neo2 Platinum

Me and my uncle both have MSI K8N Neo2 Platinum motherboards and both boards were bought from different places at different times. Both boards are exactly the same and both have the latest 1.4 BIOS.
We're both having the same problem with ps2 mice, I myself am not bothered about this problem but my uncle is so I need help.
Basically when you insert a ps2 mouse into the back of both our pcs, 7 times out of 10 the pc loads windows but the mouse doesnt move. The mouse is completely frozen. When you plug a usb mouse in, i can use that but still the ps2 mouse doesnt move.
When you plug in a ps2 keyboard along with the ps2 mouse, the mouse works everything time but without the ps2 keyboard in, most times the ps2 mouse doesnt work.
We both have no problems with usb devices but the ps2 mouse port (Green) isnt working all the time.
Having a quick look at this forum, i saw this thread.. PS/2 mouse not working exact same problem as me and my uncle.... is there a fix out now for this?
I use a usb mouse anyway and i know if my uncle switches to usb it will work but he shouldnt have to do this, if a board has ps2 support, it should work.

Quote
Two choices. USB Mouse or RMA it
What does RMA it mean?
Quote
The PS/2 ports on any computer can get blown if you plug a PS/2 device when the computer is powered.
I didnt know that, thanks for telling me, i know not to do this in the future.
Quote
Other than that, check BIOS to see if PS/2 option is enabled!
If ps/2 wasnt enabled in the BIOS, the ps2 devices wouldnt work at all would they? My ps2 keyboard works fine, my uncles ps2 mouse doesnt work sometimes so ps2 must be enabled in the bios.
thanks for the replies, could this be fixed if MSI knew this problem and release a new bios?

MSI K8N Neo2 Platinum AND SATA2

i have MSI K8N Neo2 Platinum motherboard with 3500+ cpu and WD 160 hard sata disk.
I 'd like to ask if my MSI K8N Neo2 Platinum motherboard support sata2 hard disk drives, in order to know which HD to connect as a second HD drive, SATA or SATA 2 ??

It'll see SATA2 as regular SATA. You won't loose any speed either. There are no hard drives that actually benefit from SATA2 spec speeds. Well, maybe in isolated near theoretical benchmark cases one current model might be faster in SATA2 mode.
We just haven't got the technology yet.

MSI K8N Neo2 Platinum and Venice E6

Hi!
I have just bought an MSI K8N Neo2 Platinum motherboard and an AMD Athlon64 3000+ processor with Venice E6 core (ADA3000DAA4BW).
Will this mobo boot with that processor? Or do i have to use a Winchester to flash the BIOS first? Personal experiences would be helpful!
Andres.

Your new board probably came with the 1.9 bios. The new 7025v1B.zip bios (1B only a couple days old) I think is for some of the new X2 AMD Processors. The MSI link to Products/Mainboards/Neo2/Processor Compatibility is now setup to use the 7025v1B.zip bios. As I recall the previous Processor Compatibility Chart for 1.9 bios was OK for all the Venice cores (E6 or not). I think it is only some of the latest E6 bigger models are affected by the latest 1B bios. Maybe someone has the older 1.9 bios Processor Compatibility Chart.
You shouldn't need to use a Winchester, some X2 processors would be recognized as earlier X1 models until the newer bios was installed. I think you should be OK with the 1.9 bios. I have the San Diego 4000+ and my board, one month old, came with the 1.9 bios installed.

Msi k8n neo2 platinum and corsair cmx512-3200LL

is anyone using the corsair cmx512-3200LL with the msi k8n neo2 platinum or any other motherboards? if so how well does that memory overclock for you?

LL used winbond CH-5 or BH-5 or Infineon B-5 depending on revision .
And everybody knows that it's hard to overclock winbond very far without excessive vdimm increase (2.9v - 3.4v).
Corsair XL use samsung TCCD and overclocks much easier when having a motherboard with a vdimm limit at 2.85v.
xms 4xxx also use samsung (TCCC or TCCD) and some versions use hynix D43/D5
so you can't directly compare xms3200LL with the others .
You can query RamGuy about the chips used on the spesific modules here :
http://www.houseofhelp.com/forums/showthread.php?t=35940&page=1&pp=15
Note the Part , version , and lot number before posting .

These ATI cards 9500 Pro and 9700 Pro ok for MSI K8N Neo2 Platinum and winchester cpu? Compatible?

Looking at grabbing a used ATI 9500 Pro or used 9700 Pro AGP card for my MSI Neo2 Plat since I can't use my Matrox G400.
Any problems using either of the above cards? I don't play a huge amount of 3D games so I'm not going to grab a 9800 Pro or XT or 6600GT. A 9500 or 9700 Pro would allow me to play the newer games at reasonable resolutions. Just want to make sure they are compatible.
thanx

Ok guys, thanx for the feedback. I missed the 9500 Pro sale, so maybe its for the better. If I'm going to try a bit of 3D gaming, I may aswell get a little bit better card. So here is my question for you folks:
For my MSI K8N Neo2 and AMD64 3000+ system, I want a card that will have good 2D output and good DVD playback. I want to try some 3D games, but don't want to have the minimum. I was looking at used 9500 Pro's and the 9600 XT but I've come across a used 9700 Pro and a 9800 Pro and 9800 Pro with r360 core (almost a 9800XT). So if I get a 9700 Pro, what will I be able to play smoothly at what settings and what will I be unable to play. Ultimately, I may play mostly on my projector at 858 x 484, so maybe the cards don't matter too much. If I don't play 3D games much after a while, I'll probably downgrade, but I want to give it a try. I can't afford a new 9800 Pro/XT or 6600GT.
Used cards I'm deciding between. Have to act fast.
9700 Pro $170 CAD or 9800Pro $210 CAD or 9800 with r360 core $230. Price differences between the cards is as you see there.
thanx in advance for any feedback,

MSI K8n Neo2 platinum and drivers chipset, 5.03 or 5.10?

Hello,
J reinstalled my K8n neo2 with XP SP2, A64X2 4200+, XFX 7600GT ....
On MSI website there is 5.03 drivers for this motherboard. There is no 5.03 on nVidia website drivers archive?
On nVidia website there are 5.10 and 5.11 drivers. j look here that 5.11 is not very stable.
So, what is the best: 5.03 or 5.10?
Excuse j write not very good english!
Thank.

The 5.10 works fine - 5.11 has cause network problems for most people. There are better (V4.79) IDE/SATA/RAID drivers available if you want to do your own mix: DL the 6.37 Beta from here http://downloads.guru3d.com/download.php?det=971 and replace the IDE subfolder in the C:\NVIDIA folder from unpacking the 5.10 nVidia driver pack with the IDE folder from the 6.37 Beta, then run the Setup.Exe in the 5.10 subfolder. 6.37 Beta was nVidia's early attempt at a unified nForce3/4 driver pack but they gave up the unified idea without ever publishing one. There may even be better "mixes" available but this works for me and I've been running a RAID-1 with them for 2 years now with no faults.

Problems With MSI K8N Neo Platinum

Posting some probems I have face and wondering if you folks have experience similar problems. I bought 2 and bot hahve same problems (sold both of it). Another friend of mine have also same problems with the board.
1. SATA 1/2 don't work properly. I have detection problems using SATA ports 1/2. The comp will not detect my IDE devices and hang at POST screen. Reboot/reset don't solve the problem. I have to turn off and on to get it to work. Problem is only sovled after switching to SATA 3/4.
2. Network disconnection problem. The NIC will auto disconnect and reconnect back by itself, esp. when under overclocked conditions.
3. Cannot overclock much using DIMM slot-1 esp. when mem is over 230MHz. Must change to slot 2/3. Even so, I do face BSOD stating an USB driver is the cause of the issue.
4. Comp will sometimes unable to reboot at FSB between ~210-240MHz. 250Mz and above seems OK.
Now, I am using Abit KV8 Pro 1.1 and it works fine though. No FSB reboot issues. I am using 1.1 with latest BIOS, thus not AGP/PCI lock issues. Hope MSI will fix those problems mentioned ASAP cause my Abit don't work with mobile A64s. :(

Seriously, I have absolutely no idea. It may be a QC problem, it may be a design problem, its may be BIOS or others. The only thing I know that after I jump ship to Abit KV8 Pro 1.1, all these problems are gone. Only problem is that Abit don't support mobile A64s.
BTe, just another problem or maybe over conservative restrictions. When using DDR333 RAMs, the BIOS will not allow you to manually set it to 400. Thus at 200MHz FSB/HTT, your RAM is stuck at 166MHz. Pretty stupid restriction I have to say.

MSI K8N Neo2 Platinum and seagate sata2 500Gb

Hi all,
As per subject, when the drive is connected to my computer it does not get passed the boot screen as all it keeps on doing is rebooting its self,
i have checked all my bios settings and all is as it should be, also i would like to mention that i already have 3 other sata drives connected to this motherboard, of which 2 are, 160Gb Seagate hard drives, and 1, 30Gb Weston digital hard drive, and they work perfectly,
I have also tried unplugging all the drives and just trying the new one, and setting the jumper to limit to 1.5Gb/s but still all it does is reboot, do you think the drive is faulty?
Thank you

Quote from: Chippy99 on 21-May-07, 21:51:09
Seems strange. I have a Seagate sata2 500GB (ST3500630AS) hooked up to Sata port #1 on my K8N Neo2 and it works perfectly. I have found it to be *very* intolerant of overclocks though.
What sata port are you connecting to? And are you overclocking?
This could be the problem ..... SATA ports 1 & 2 on the nforce3 boards are NOT locked. I only use 3 & 4 plus set your AGP clock to 67 or 68 to be safe (this is supposed to lock the PCI bus but only seems to work on SATA 3&4). Of course, this won't be a problem if you are running at Safe Default settings.

Problems with msi k8n neo-2 and xfx 6800 card

is this card incompatible with the msi k8n neo-2 motherboard?
i ve got this mobo last week and when i tried to install the card to it nothing comes on screen, no beeps or nothing, ive changed the power supply, the card works fine on my old pc with both power supplies (old pc was 2500+ amd with epox 8rda+) i ve tried booting up with nothing else connected on the psu except the card itself, it still doesnt seem to work, the new motherboard works fine with my old radeon 9600 pro.
What can i do?

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

MSI K8N Neo2 Platinum and Speedfan configuration

I'm hoping someone else with a similar K8N Neo2 setup can compare Speedfan notes with me. I'm trying to figure out what maps to what, here's my best guess. Let me know if your best guess differs.
Temp1: System / Case temp
Temp2: CPU
Temp3: Northbridge
Local Temp: CPU Socket sensor
Remote Temp: nvidia 6800 GT GPU sensor
Fan1: Northbridge
Fan2: CPU
Fan3: no sensor
PWM1: Fan1/Northbridge speed control
PWM2: Fan2/CPU speed control
PWM3: Any ideas? I'm hoping this controls voltage for at least ONE of the fan headers on the motherboard, so I can control my case fans. If anyone knows, please fill me in.
Thanks!
Rich

C'mon people, doesn't anyone have more info about this subject? I have everything figured out but speed03 and or fan03. I can not seem to control my case fans, only my CPU and northbridge work. I have 2 of my case fans plugged into the mobo and are reading 2700rpms but I can't slow or speed them up no matter what I do. It would be nice to have the system fan controlled my case temps just like the CPU fan is
Is ther something in bios I have to enable or something?

MOVED: Drivers nForce3 ultra on MSI K8N Neo2 platinum and Vista?

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=109347.0

The 5.10 works fine - 5.11 has cause network problems for most people. There are better (V4.79) IDE/SATA/RAID drivers available if you want to do your own mix: DL the 6.37 Beta from here http://downloads.guru3d.com/download.php?det=971 and replace the IDE subfolder in the C:\NVIDIA folder from unpacking the 5.10 nVidia driver pack with the IDE folder from the 6.37 Beta, then run the Setup.Exe in the 5.10 subfolder. 6.37 Beta was nVidia's early attempt at a unified nForce3/4 driver pack but they gave up the unified idea without ever publishing one. There may even be better "mixes" available but this works for me and I've been running a RAID-1 with them for 2 years now with no faults.

MSI K8N Neo2 Platinum and installing XP on WD 1TB Caviar Black SATA-II HDD...

I haven't flashed my BIOS ever. So some will be glad to hear that since I never needed to--but I think I might have to now.
My comp crashed (just made a very long story short ), so I bought a new HDD and it's the one described in the title. It's "SATA-II" as the misnomer goes but when I installed windows on it things seemed to go just fine (at least it didn't give me any errors)--indicating the mobo didn't have any trouble allowing to install (if it has anything to do with the install in the first place). And that was without a jumper to make it go to 150 mb/s (the HDD was OEM and didn't come with one :()
When I went to booted up again after installing, I received the renowned "Error loading operating system" message.
So! I figure I need to update the BIOS so it can better interface with the new HDD. Is that a correct assumption or could my error be due to something else (like the jumper)?
Thanks for any help!
EDIT: Forgot to mention that I already had/have a SATA-II drive (300 mb/s one) installed and working just fine, recognized by windows, before the crash...but it wasn't the boot drive...so maybe that makes a difference?
EDIT 2: I tried to use the BIOS util provided on these forums but I can't use it since I have no working install on the windows drive for my PC. I'll look on the other forum page for a way to make a USB BIOS flasher on an independent computer, but if you have the link for me, that'd be even better. If I find it soon, I'll edit this out. Thanks.
EDIT 3: Eh, so it looks like it just needed a good restart...everythings fine--no flashing needed. Woohoo!

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

MSI K8N Neo2 Platinum cant upgrade to BIOS 1.4, Windows wont boot.

Hello
I have a MSI K8N Neo2 Platinum and I cant upgrade to BIOS 1.4. I have tried everything and cannot get Windows XP to boot with BIOS 1.4.
I have reset the BIOS, set defaults, cleared the battery etc but when I load BIOS 1.4 (from a 98SE an ME boot dish and even from the Live Update?
The only solution is to rebuild Windows after loading BIOS 1.4???
Help

Hi !
Well, I have that problem, too. I think the reason is a new RAID-BIOS-Version built in the BIOS-Update. I´ve tried the beta-versions V1.51 and V1.5X, too - but they won´t run anyway.
My WinXp hangs while booting (before the WINDOWS-XP-Logo appears, or while fading in...). I cannot reinstall Windows completely because, when I install the 2 raid-drivers, the installation routine hangs before the licensetext - when I don´t install the drivers i cannont install on the raid-drive (beacuase the installation routine shows 2 hdds).
I think, a new driver will solve this problem, but I don´t know where to find it....
A.

MSI K8N Neo2 Platinum; ethernet probs!?

Hey guys,
I'm having problems getting my DSL hooked up to my new PC. I'm using a MSI K8N Neo2 Platinum, and according to my ISP phone-tech, the problem is with my "NIC".??
When examining the back of the PC, the slot where my ethernet cord is connected is green accompanied by yellow blinking. All lights on the Speedstream 5100 modem itself are green... No probs in the device manager... Switched ethernet cable from top to bottom port... Flahsed/Updated my BIOS from ver1.5 to ver1.8... Still have blinking yellow light... unable to connect to the internet on my new PC.
(Blinking light appears on both (top & bottom) ethernet ports when i have it plugged in)
Can someone point me in the direction of what to do / which drivers i need to install/uninstall...!?
Need help... Any is welcome.
The PC: Athlon 3500+ / 1 GB RAM / 80GB SATA WD / 250 GB 16M Cache IDE Maxtor / Geforce 6800GT / MSI K8N Nforce 2 Platinum

Doh, i seem to have taken a few step backwards...!
I returned the modem for another (brand = 2-wire gateway)... Still unable to connect; problems are similar, but let me tell you....
I have uninstalled all nvidia drivers --- went back to the drivers on CD. In Device Manager all devices are OK. I have both the nvidia LAN & MAC LAN ports enabled. Everything seems to be default settings (exception: i disabled windows firewall). Also I did not install nvidia FIREWALL option during install.
I plug in new modem... it boots, but middle light (broadband link light) is solid orange. According to the 2-wire site/faq
--- Broadband Link light ---
Solid orange - The HomePortal has established a physical broadband connection but was not able to successfully connect to your Internet Service Provider, or has not yet been configured. (can't PPPoE login. Username/Password failure or the other end is fubared.)
With this set-up; i am unable to run REPAIR on nvidia LAN connection (unable to restore IP); under the nvidia connection details: packets are being sent, but none recieved...
Ok, now get this.... I plug ethernet cord into the MAC LAN port; go to Network Connections; packets are being sent/recieved //// I am able to repair the connection.... yet the broadband link light = solid orange still!!
Next, I use the USB connection for the new modem, it asks for software/drivers... place install CD in... all lights = green... I AM able to connect!!!!!!!
probably, problem was i didn't load software from CD with the ethernet connection goin... !? (me = idiot !)
I'm gonna reinstall WinXP now... and hope to duplicate results, but on the ethernet wire (running SBC software)... if all else fails, i'll just prob set up the USB set-up..!
Thanks for your patience fellas...

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

Similar Messages

Maybe you are looking for