"Reboot screen" after time machine migration

After a blue screen one morning I decided to check HDD through Snow Leopard CDs.
HDD and Permissions were fine. But still no boot.
After reinstalling OSX and full Updates I transferred Time Machine Back-up.
On reboot a dark grey screen appears and asks me to reboot, again and again and again...
HELP!

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

Similar Messages

  • Help! Can't get past grey apple screen after Time Machine restore

    Today I did a complete restoration of my HD using Time Machine. It seemed to successfully complete, prompting me to his <RESTART>, which I did. After the grey screen with the apple, I get this black and white pattern, almost like patchwork. Anyway, I've rebooted a zillion times, each time with the same result. I haven't had any luck starting in safe mode, but I'm wondering if the wireless keyboard is even being recognized. I've got a phone call request into Applecare, but I am really freaking out. Anyone ever heard of this before?

    navyshrink wrote:
    Today I did a complete restoration of my HD using Time Machine.
    Did you use a Leopard disc for that? If so, that's your problem: you must use a Snow Leopard disc to restore a Snow Leopard backup.

  • ITunes 12.0.1 on Yosemite cannot locate my music after Time Machine migration

    Hi hi
    On my old 2008 iMac, my iTunes consists of music media on the internal iMac hdd and on an external HDD.
    The option "Copy files to iTunes Media folder when adding to library" was left unchecked on my iTunes.
    My 2008 iMac froze and stopped working thereafter a few days ago and I bought a new iMac.
    After updating my new iMac to Yosemite, I transferred my old iMac settings and data from the most recent Time Machine backup via Migration Assistant.
    Loaded iTunes on my new iMac and noticed that certain playlist are not working, i.e. cannot locate the media file.
    I narrowed those unplayable playlists to the music located on my external HDD.
    For those that were working, when I get info on the music files, they were located in my new iMac's internal HDD that were transferred over from my Time Machine backup, i.e. ~/Downloads/MP3s/etc.
    Those that were unplayable and located in my external HDD points to ' ~/user/xxx/Music/iTunes/iTunes media', roughly along this line despite my old external HDD being plugged into my new iMac.
    May get some help as to how to get the unplayable media on my external HDD working on my new iMac?
    Any help will be greatly appreciated. Thank you.

    actually i have same problem with yours. Finally i get iTunes update from apple website, not thru app store.
    but so far i still have no idea to make those iTunes update(8 times) disappear.
    it's really ugly in that page.
    maybe some one have idea to solve it , please advise it. it will be appreciated much ~

  • Uninstall problem in cc applications after time machine migration to new mac

    Newbie to cc. Having problems with cc programs that were migrated across to new iMac via Time Machine back up when setting up new mac.
    Attempting to open PS cc results in error message 86. I have now uninstalled Creative Cloud program and a PS cc program in Utilities via Adobe Installer in Ulilities however, (other copies?) of the programs PS cc and Bridge cc, the only 2 cc programs I have so far, are listed in my Applications folder.
    I think I need to remove them both from the Applications folder but am unsure how to do this safely. There is no Abobe Uninstaller now in Utilities as it was empty after uninstall removal of duplicate? programs noted earlier so I deleted that too.
    Should I send them to trash? And then perhaps I can start afresh with new installs of Creative Cloud and required cc programs.
    Any advice gratefully received.
    Thank, Barry

    Hi Jakekira14,
    We never suggest our customer's to move Adobe softwares using Timemachine because it causes launch/Licensing issues. I would request you to kindly delete all the Adobe folders and then install everything from scratch. To remove the left over's, please delete the following folders from your machine.
    Click on Go>Go to
    /Library/Application Support/Adobe
    /Library/Preferences/Com.adobe.....
    ~/Library/Application Support/Adobe
    ~/Library/Preferences
    Cheers,
    Kartikay Sharma

  • Mail 5.3 crash after Time Machine migration

    All,
    I'm facing a problem with Mail 5.3 while trying to recover my email db from Time Machine after an update of MacOS.
    Here the following steps I made to perform this update:
    Update my iMac from SL to Lion 10.7.1 using the clean install way.
    Install last 10.7.5 combo update.
    Perform migration of content and system preferences from my last Time Machine backup before the upgrade (using the Migration wizard)
    Finally, run Mail.
    After having performed the email db conversion (without any error message), Mail seems to crash since no main window appears in the application.
    I need to force the application to show the main window with the dedicated command of the Window menu.
    But the result is not what we should expect !
    Please check the snapshot herein attached.
    While looking at the console, it seems that an error occurs during the execution of Mail, with the following error message and code :
    29/10/12 08:30:37,835 Mail: An exception occurred during invocation of -[MailboxesController _writeSmartMailboxesToDisk]
    29/10/12 08:30:37,836 Mail: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
    Is there any member of this community who could have an idea what's wrong with this ?
    Thanks,
    Michel

    Some progress on this issue to share with you.
    First, Mail.app on the others user account was fine and I managed to successfully perform the migration from Time Machine.
    This led to the point that the problem was relying on the Mail DB rather on the Mail.app itself.
    I have reinitialised the Mail.app on the user account where the problem occured using the following guidelines:
    - access to the Library folder using the [Alt]+[Goto Menu] of the Finder
    - rename Mail and Mail Downloads folders into Mail.old and Mail Downloads.old
    - delete com.apple.mail.plist and all com.apple.mail... files in the Preferences folder
    Then, start the Mail.app again
    Mail.app has been reinitialised completely !

  • Can't log in after time machine migration.

    I just bought the latest model running Lion today, used time machine to migrate my data from my old MBP running 10.5. After the migration done I couldn't log in and stuck at the start up page. Is there any way to solve this problem (I'm pretty sure that's not the password issue)?
    =_= Please help.

    Time Machine will (should) restore your old accounts. If you used a different user and password to set up your new MBP, try using one of your old accounts to log in. If that doesn't work, call back. You might also want to research your problem on Pondoni's Time Machine FAQ pages -  http://pondini.org/TM/FAQ.html.
    Good luck,
    Clinton

  • What to do after Time Machine migration (how to start using TM again)

    Hello,
    I have just restored my system from my Time Machine (TM) backup (I have a USB hdd plugged into my airport extreme (AEB), so the TM backup is a sparsebundle file on the USB hard disk).
    The initial setup with migration assistant did not work - it could not find the sparsebundle on my hard disk (this was with leopard 10.5). After setting up a dummy account and doing a system update to 10.5.6 migration assistant then worked fine.
    My question is how do I start doing TM backups again? If I am logged in as the user who was restored via migration assistant and then enable TM and then select the HDD that is shared over my AEB will it automatically recognize the old sparsebundle and use that as the starting point for backups? Or do I need to delete the old sparsebundle and then start a brand new backup?
    My external HDD is not big enough to accomodate an additional backup, and so I would prefer to just use the existing backup if possible.
    Thank You!

    atticus_pf wrote:
    Hello,
    I have just restored my system from my Time Machine (TM) backup (I have a USB hdd plugged into my airport extreme (AEB), so the TM backup is a sparsebundle file on the USB hard disk).
    The initial setup with migration assistant did not work - it could not find the sparsebundle on my hard disk (this was with leopard 10.5). After setting up a dummy account and doing a system update to 10.5.6 migration assistant then worked fine.
    My question is how do I start doing TM backups again? If I am logged in as the user who was restored via migration assistant and then enable TM and then select the HDD that is shared over my AEB will it automatically recognize the old sparsebundle and use that as the starting point for backups? Or do I need to delete the old sparsebundle and then start a brand new backup?
    My external HDD is not big enough to accomodate an additional backup, and so I would prefer to just use the existing backup if possible.
    not possible. TM will make a complete new backup after a new install and there is no way around that. if your existing backup drive is too small for that you have to delete the existing backups and start TM backups from scratch. (just thrash the sparse bundle and empty trash).
    Thank You!

  • Kernel panic after time machine migration after clean install of 107.3

    I had the hard drive replaced in in my mid 2009 17" MacBook pro. After the clean install of lion I migrated my data from time machine (lion) to the new clean partition.. Upon completion the machine is unresponsive. The progress wheel turning for 10 minutes. I force quit and restart to kernel panic. I have been through this 3 times same sequence of events same results. Any ideas?
    Thanks in advance,
    John

    See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Grey screen after Time Machine restore

    Hello, I have conducted a fair search for the problem I'm having but it seems like I'm going in circles. Before you all chose to beat on me for posting yet another grey screen issue please hear me out.
    I have an early 2008 imac 8.1. The old HDD (WD3200AAJS) had a S.M.A.R.T fail. After reading many posts about this, I did not hesitate and quickly I replaced the HDD with a new one, the 1TB WD1000FAEX and installed the OS with no problem. Then I proceeded with the Snow Leopard install, again no problems. The imac started up and functioned with no flaws
    Since it was a new HDD and none of my data was available, lucky me I have a Time Machine to bring all my data back. I used the Mac OS disk to get me to the installer screen and from there i was able to go to Utilities/Restore System From Back Up. 25 hours later, Grey screen! Did the PRAM reset, RAM check, safe boot, no periphials. Nada, still grey screen, I'm at a loss.
    I booted up with MAC OS disk, holding C while she starts, went to Utilities/Disk Utility to check the HDD and it shows the used space 153.3GB which is what was in the Time Machine, hmmmm. So it has the original data. Prior to the TM restore the imac was functioning like new, after the restore it cannot get past the grey screen.
    Has anyone had an restore issue with the TM similar to this?
    Thanks for reading.
    Alex

    Hi Alex
    Welcome to Apple Discussions
    Sounds like maybe you forgot to properly set the new drives Partition Map Scheme to GUID Partition Table and Format to Mac OS Extended (Journaled) before trying to install or restore the OS X on it.
    1. Pop your install disk back in, skip the installer, go to the menu bar and select Disk Utility.
    2. In Disk Utility select the Drives first icon in the list of drives and then the Partition tab.
    3. Then under Volume Scheme: click on the box that say's Current and select 1 Partition.
    4. Now click on the Options... button directly below the Untitled 1 box.
    5. Select GUID Partition Table for Intel iMac's.
    6. Hit OK and then the Apply button down in the right bottom corner.
    7. Once that's done Install the OS X and Restore from your Time Machine backup.
    If your OK up to that point, see > http://web.me.com/pondini/Time_Machine/14.html
    Dennis

  • Gray Screen After Time Machine Restore

    I have an iMac running Snow Leopard (most recent update) I recently tried norton antivirus for the mac but found that it slowed down my mac too much so i uninstalled it with the uninstaller. The error i got was a circle with a line thru it at startup. After following steps on disk repair and permission repair i still couldnt get rid of this so I did a restore from time machine. I used the original disk (not the snow leopard upgrade disk) to reach the time machine restore. After trying 2 different backups I'm now getting the gray screen that asks me to restart my imac. I've unplugged everything else. The internal hard drive and ram are all factory.
    Any suggestions for a frustrated iMac user ???

    HI Corey,
    There are no Mac viruses in the wild. Unfortunately, you selected the worst A/V software possible. Here's a list of Mac users who installed Norton. http://discussions.apple.com/search.jspa?search=Go&q=norton
    After trying 2 different backups I'm now getting the gray screen that asks me to restart my imac.
    That's a kernel panic.
    Thing to do now is a complete erase and install from your SL disc.
    http://support.apple.com/kb/HT3910
    or here...
    http://macs.about.com/od/snowleopardmacosx106/qt/cleaninstall_sl.htm
    Carolyn

  • Missing a month's emails after time machine migration

    I backed up my MacBook Pro before migrating all the data to a new iMac. Opening Mail on the iMac I discover I am missing the last month's emails. What might be the problem? Has TIme Machine lost them or not recognised them? How can I now get the missing email datga from the Macbook Pro into the new iMac Mail package? Advice, please.

    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A folder window will open. Inside it there should be files with names as follows:
    Envelope Index
    ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Warning: The process may take hours if you have gigantic mailboxes. For reasonable-sized mailboxes, it should only take a few minutes.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

  • Trouble Accessing Virtual Machine After Time Machine Migration

    I am hoping that someone else has run up against this problem and is able to help.
    I recently purchased a new iMac.  I upgraded to 8 GB of ram specifically because I have VMware Fusion and want to use it on my new machine.
    I chose to migrate my entire old iMac to the new machine using my Time Machine backup.
    VMware appears to have migrated successfully.  I do not have any trouble accessing the application, but when I try to resume my only virtual machine, which is for Windows XP I get the following message:
    VMware Fusion cannont connect to the virtual machine.  Make sure you have rights to run the program and to access all directories it used and rights to access all directories for temporary files.
    How do I resolve this problem?
    Thanks in advance to anyone who is able to offer me a clue on how to overcome this.
    If I can't access this machine it appears as if I will be able to create a new one.  I would like to avoid having to do that if it is possible.
    Terri Schurter

    Captfred,
    In that folder there is a virtual machine.  It is called Windows XP Professional.  So it is there.   When I am in VMware Fusion I can see Windows Media Player, which is what I was probably accessing the last time I was in the machine, so it does appear to have backed up the virtual machine.  I would expect it to because it is a part of a Mac application, VMware Fusion.
    It appears to be an issue with permissions that I don't know how to solve.
    I know there is a VMware forum, but I can't even figure out how to sign up for it the darned thing is so confusing.  I can't seem to post to it no matter what I do.
    Terri

  • Aperture won't launch after Time Machine Migration

    After a hard drive failure, I've just got my system all restored from a Time Machine backup, but when I try to launch Aperture it just fails.
    Not sure whether there's something obvious I'm not doing, or whether I need to reinstall. The library package etc all seems to be where it ought to be.
    Any ideas welcomed!
    Thanks.

    Thanks - that fixed it nicely.

  • Read only access issue after time machine migrate

    Having a small issues on my new rMBP. I recently switched from my MBA to this newer rMBP and I previously had a Time Machine backup that I migrated over. For some reason though..when accessing my external hard drive it keeps asking to authenticate the user and I have to put in a password anytime I edit or add files to this external drive. I was also having issues running some commands in Terminal where it said I didn't have access..my current user shows up as being admin but I'm not entirely sure how to get past all these restrictions and have read/write access  to everything.

    So I looked at the above images and noticed that the disk labeled "HD-PATU3" is almost entirely full - only 5GB of 1TB is available - so it's essentially "full".
    You said that this drive "was" used for Time Machine backups - is that still what you want to do with it in addition to your own files? If you do still want to use as TimeMachine that's OK, but you can't predict what TM will do with it as far as space goes unless you split the disk into two partitions. TM knows how to remove old "snapshots" to make room for new backups, but do you need space on there as well for your own stuff?  Some people think it's not a good idea to mix your own stuff and TM stuff on the same disk volume, so that has to be your decision to do.
    You might want to take a look at http://pondini.org/TM/6.html and read what he has to say (Pondini is a TM expert/god/phsychic - basically he recommends splitting up the drive into two partitions - one for TM and one for you - that way things are easier for your data as you don't have to live with issues the TM enforces on it's backup volumes. So answer the questions:
         1. how large is the internal drive on the rMBP?
         2. how much do you want the external drive to have for backups and your stuff - in fact is there a reason why you don't have all
             stuff on the internal drive? There are performance penalties for having your data and TM backups on the same disk. You
             probably have a nice large internal disk on the new rMBP so is this really what you want to do?
         3. Depending on the answers we can get more specific to solve your issue(s)
    later......

  • Can't find iphoto library after time machine migration of 2011 imac to osx 2014 imac

    I recently purchase latest 5K Retina display iMAC with Yosemite. Had a 2011 Intel iMAC it had a flash drive with latest iphoto library. An older iphoto library was located on the standard HD on the 2011 iMAC. EVerything on this computer was backed up with Time capsule.
    When I purchased new computer, I used migration assistant and the Time capsule to migrate files to new iMAC. The newer iphot libray is present but cant find the older one.
    What did I do wrong?

    Download Find Any File (www.macupdate.com) and do a search for the library.

Maybe you are looking for