Reboot Twice

Hi,
I have a strange problem on my T21 IBM laptop, I have installed Solaris 8 (07/01) on it. Whenever I reboot the system by using init 5,6, shutdown or poweroff commands it comes back and get stuck just after the boot window(the one we use to do single user mode). Just a blank
screen and I only can see is blinking curser and nothing happens. Then I need to do a hard reset or a power off to get it back. This only happens if I reboot not with fresh start. Same problem was there with my previous laptop, which was Asus and I gave it up as it had some problems with video setup.
Someone advised, saying that this appeared to be an ACPI problem. They suggested that me to try:
setprop acpi-user-options 0x2
in the DCA manager, then save the options and try gain.
Well I did that too but my problem is not solved yet.
Also I have tried ata-dma-enabled set to one, and reset to zero, didn't help at all.
Please if your guys have ever seen this kind of a problem, please drop me a suggestion. I have been stuck with this problem for a long time.
Thanks
Regards
Kum

Hi,
Thanks for the reply
Well, then, Let's ask technical support guys at Sun who are watching this forum. Tell you more about it, this is quite a known problem on Solaris 8 but only on certain Intel systems. This must have got something to do with some hardware I guess. But I never found remedy and this is lot embarrassing. May be they (SUN)did know but not found a solution yet. I heard that also FreeBSD had kind of a problem and they managed to fix it.
PLEASE TECH EXPERTS TELL SOMETHING
Regards
Kum

Similar Messages

I have suddenly lost the ability to put events in my calendar on my iPhone. Why would this be happening? I have rebooted twice and am still having the issue.

I have suddenly lost the ability to put events in the calendar on my iPhone. I have rebooted twice and still nothing. Does anyone have a so,union for me?

iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.Try to use an alternate Internet connection if available:
Try a different Wi-Fi connection
If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.

MBP recovery mode - why reboot twice?

Hello, I have a 2012 MBP which came with MacOS 10.8.2 which I upgraded to 10.8.3.
I decided today to do a clean re-install of the OS.
I was not watching the Mac during recovery (since it takes so long to do!) but I heard it reboot automatically after 2 hours or so. Then I heard it reboot a SECOND time.
At that point I looked at the Mac and it was asking the usual setup questions (time zone, username, etc).
Why did the Mac automatically reboot twice? I kinda wish I had been paying more attention to it. Did it automatically install 10.8.2 in recovery mode, automatically reboot, then automatically install the 10.8.3 update and automatically reboot again? (Current OS is now 10.8.3 and everything works fine, btw!)
Thanks, Chris.

I found the answer:
1) The Mac downloads the OS, then auto-reboots.
2) The Mac then installs the OS, and auto-reboots a second time.

Z10 reboot twice a day

Since yesterday I am a owner of Z10 device, but my device reboots twice a day. Current OS: 10.1.0.273

The random rebooting is a known issue on some devices and OS upgrades have not fixed it.
BlackBerry is working on it.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My iMac (21.5-inch, Mid 2010) has rebooted twice now for no apparent reason, since the successful install of Yosemite.

My iMac (21.5-inch, Mid 2010) has rebooted twice now for no apparent reason, since the successful install of Yosemite.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

My onscreen keyboard disappeared and it won't come back. I rebooted twice and still nothing?

the onscreen keyboard just disappeared. I googled as a question and found some advice that said to reboot - which I did, but it still wont come back. i wouldn't be able to do do anything on it if I didn't have a bluetooth wireless keyboard - thank goodness. anyone have any advice?

Perhaps it's time to restore.
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

Had to force a reboot twice already today, missed ...

BT, HOW LONG ARE WE GOING TO HAVE TO WAIT FOR A FIRMWARE UPGRADE, THIS HAS BEEN GOING ON FOR MONTHS!?!?!?
GIVE US SOME CUSTOMER SERVICE!

jam2000 wrote:
Well I have the new software and not had any issues with it at all. So it does appear to be only some users that are experiencing problems and issues.
Same here. I never had issues with the old software, and no issues with the new software either. I may have had one reboot since I got the new version about a month ago, but that's all.
So the question to ask is, why is there a slice of customers getting so many problems, and so many other customers that are problem-free? Could it be a defective batch of boxes and whoever happens to get one from that batch gets these problems?

Production server was rebooted twice due to the cpu panic

HI.
Today production server was restarted automatically and found in the logs as cpu gets panic.
Found below logs in /var/adm/messages :
Aug 7 10:54:00 unix: [ID 330770 kern.notice] send mondo timeout [retries: 0xb8f12] cpuids:
Aug 7 10:54:00ABCDEFunix: [ID 152697 kern.notice] 0x0
Aug 7 10:54:00ABCDEFunix: [ID 100000 kern.notice]
Aug 7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu0
Aug 7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu1
Aug 7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu2
Aug 7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu3
Aug 7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu4
Aug 7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu5
Aug 7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu6
Aug 7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu7
Aug 7 10:54:00ABCDEFunix: [ID 836849 kern.notice]
Aug 7 10:54:00ABCDEF^Mpanic[cpu59]/thread=3005a920340:
Aug 7 10:54:00ABCDEFunix: [ID 152620 kern.notice] send_mondo_set: timeout
Aug 7 10:54:00ABCDEFunix: [ID 100000 kern.notice]
Aug 7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181310 unix:send_mondo_set+4a4 (1, 2, 31a968c90fe012, 3e, 300095b0600, b8f12)
Aug 7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 000000000183c730 0000000000000001 000000000000ffff 0031a968c90fe508
Aug 7 10:54:00ABCDEF %l4-7: 0000000001dc7ac2 0000000000000000 00000000010b7fa0 0000000000000000
Aug 7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a1081813f0 unix:xt_some+194 (2a108181650, 2a1081814e0, f7ffffffffffffff, fffffffffffffff8, 2a1081814a8, 0)
Aug 7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 00000000018919ac 000002a1081814e0 0800000000000000 0000000000000000
Aug 7 10:54:00ABCDEF %l4-7: f7ffffffffffffff 000002a108181520 000002a1081814e0 0000000000000000
Aug 7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181560 unix:sfmmu_tlb_range_demap+1e8 (2a1081817a0, 300155e0980, 3b, 0, 0, 1)
Aug 7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 00000000018af610 0000000000000001 00000000018b8c74 00000300155e0980
Aug 7 10:54:00ABCDEF %l4-7: 00000000ff180000 0000000000000001 0000000000002000 0000000000000000
Aug 7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181690 unix:sfmmu_chgattr+348 (2, ff182000, 188b260, ff182000, 0, 300155e0980)
Aug 7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 000002a1081817a0 00000300155e0980 00000300155e0988 ffffffffffff0000
Aug 7 10:54:00ABCDEF %l4-7: 0000000000001c00 0000000000000001 0000070023cc7380 0000000000000009
Aug 7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181830 genunix:segvn_setprot+9a0 (9, ff180000, 2000, ff180000, 6004cfcaf78, 2000)
Aug 7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 0000000000000000 0000000000000009 000003005ac4fbd0
Aug 7 10:54:00ABCDEF %l4-7: 0000000000000000 0000000000000000 0000000000000009 000000000000000f
Aug 7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181930 genunix:as_setprot+174 (6004cfcaf78, 3005ebbbdb8, 2000, 9, ff180000, 2)
Aug 7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 000006004cfcafa8 000006004cfcaf82 0000000000000000
Aug 7 10:54:00ABCDEF %l4-7: 0000000000000000 000006004cfcafc8 0000000000002000 000006004cfcaff0
Aug 7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181a30 genunix:mprotect+6c (1fff, 2000, 9, 0, 10b0c00, ff180000)
Aug 7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 0000000000000000 00000000217c0000 000000000000217c
Aug 7 10:54:00ABCDEF %l4-7: 0000000000000001 000006004cfcaf78 000006004b175958 0000000000000000
=================
Taken hard reboot for server after that its workingfine.
Searched on google as found as reason that there no proper synchronization between processors in the time duration(1 milli sec)
Any one got above error and how its resolved.?

c1c3a78b-3a3e-43a1-939b-c1cce9126652 wrote:
there's no hardware error found on the system
checked with prtdiag and physically.there no amber led on server also.
no error messages in dmesg.
You cannot presume there isn't a hardware fault just because a CPU module has resumed its operation after a panic.
CPU's do not become disabled.    They are too fundamentally critical to a system and will always try to run when you boot a system.
I have to contact oracle for this?
Yes,.   If your system is a Oracle/Sun branded system, then you use your service contract credentials and log a Support Request.   They will likely have you run Explorer and they will analyze the information saved in the Explorer output file.
If your system is from some other hardware company (IBM or HP for example) you contact them instead.

On my Mac, when selecting an email and entering it won't open the email. I have rebooted twice and no change.

If I get an email reply, I won't be able to open it to get the answer. This just happened out of the blue. I can check the box to the left of the email, but when I try to open, delete, or put in stored mail, nothing happens.

Have you tried closing the app completely and seeing whether it works properly when you re-open it ? From the home screen (i.e. not with the scrabble apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Re: X99A SLI Plus + Corsair LPX cold startup reboots twice??

Quote from: alvinn.ong on Today at 12:33:37MSI seriously have to fix this double reboot issue.
QuoteEvery time I power on my computer for the first time (cold start), it will boot up then RESTART and th...

I just purchased 2 of these boards to run ubuntu (mythbuntu) as HTPC. All is working fine except for the wake event for USB. I have a SoundGraph Inc. GD01 MX LCD Display/IR Receiver and I cannot find a way to have my board woken up by the power button....

Vertical lines after sleep, must reboot twice

When waking my iMac G4 (512 MB RAM, 1GHz, 10.3.9) from approximately 5 hours of sleep, I was greeted with not only a frozen screen, but one with thin vertical rainbow pinstripes and one thicker black horizontal line. Key strokes were unable to resolve the problem, and I was eventually forced to cut the power, wait a few moments, and restart.
Restarting was unsuccessful, and I got to a grey screen with barely noticeable grey vertical pinstripes, and was unable to proceed. Once again, I cut the power, restarted, and this time everything seemed fine. I checked permissions, and all seemed to be fine.
I booted from the TechTools CD, set the tests to run, and went to bed.
This morning, I checked the iMac, and found that it was asleep. When I tried to wake it up, I got another screen with the rainbow lines. The hard-drive did spin to indicate that it had woken up, but I couldn't get rid of the lines, and ended up having to cut the power once again.
I tried to reboot, and didn't get the standard chime, but instead a longer higher pitched tone and a blank screen (dark grey or black, it was hard to tell). The hard-drive was spinning, but once again I was stuck.
I was forced to cut power and reboot yet again, and this time the process went fine. I have now set the machine to not sleep (computer and display) and for the moment, things are okay.
I am now convinced that there is a problem, I'm just not sure what it is. Any and all suggestions are very much appreciated.

Hi Samantha,
Welcome to the discussions.
You need to differentiate whether this is a software issue or a hardware issue. One way to do this is to boot up using a different operating system (such as the one on your OS X installation disc). If the phenomenon disappears when you do this, then some setting within your normal OS is corrupted - that fastest fix for this is an "Archive and Install".
If it still persists, then you may have a hardware issue (most likely your graphics card). This is not good, as in an iMac, the graphics card is intergral with the motherboard - to replace the card, you need to replace the motherboard.
Let us know how you go, please.
Cheers!
Karl

I just received a Security Update from Apple for OS 10.6.8 and have experienced a severely slow reboot, taking 15-20 minutes. Applications take forever to load. Have rebooted twice... very slowly. What's up with this latest update?

When I clicked on the recent Apple Security Software Update, it took 15-20 minutes to install, and another 15 minutes or more to restart. Then everything was amazingly slow, as if nothing was happening... spinning gears, spinning color wheels. The background universe image took forever to load. Desktop took a long time to load. Then Mail and Safari took a long time to load. What has happened? Was this update legit? I'm thinking it was the legitimate listed 7-2-2013 update for 10.6.8, but in my 15 years of Apple loyalty, I've never experienced an update that bogged my system down like this.

Not enough free space on the startup disk can cause the issues you are referring to.
Control click the MacintoshHD icon on your desktop then click Get Info.
You'll see: Capacity & Available
Make sure there's at least 15% free disk space.
If it's not a disk space issue, verify the disk for errors.
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If Disk Utility reports problems, you will need to insert your install disc to make repairs.
And if you have not done so lately, backup all your important data just in case.

Message saying no sim installed but it is. I reboot twice and it works again but I want to knwo why this is happening

Phone is working fine all other times

Hi,
Do you have a folder on your hard disk called j2sdk-1_4_0. You can usually find it under C:\j2sdk-1_4_0.
If not then double click on the j2sdk-1_4_0-win.exe file to install the jsdk.
This JSDK should work with win 98.
Can't remember how to set variables on win 98 machines.

[SOLVED] network randomly doesn't work after reboot (e100)

Hi
Lately I have some weird issues with network. I shutdown computer during night, so basicly I reboot it at least once per day and every now and then without any pattern network doesn't work at all and so far only solution I have found is to reboot (again).
Before anything else I'm sure it's not hardware problem, since other OS on same computer don't have any issues, neither is router since other devices in network from laptops to mobile phones work flawless.
Relevant info and what I have found so far (not everything is copy/pasted so there may be some typos):
$less rc.conf (network part)
eth1="eth1 192.168.1.242 netmask 255.255.255.0 broadcast 192.168.1.255
INTERFACES=(eth1)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
$ifconfig
eth1 Link encap:Ethernet HWaddr 00:D0:B7:5A:7A:A9
inet addr:192.168.1.242 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:380 errors:0 dropped:0 overruns:0 frame:0
TX packets:380 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:36154 (35.3 Kb) TX bytes:36154 (35.3 Kb)
$route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
$ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data
From 192.168.1.242 icmp_seq=2 Destination Host Unreachable
So basicly network is dead, can't even ping router, cable connection is detected tho (lights are on). I have tried to restart newtork with /etc/rc.d/network stop/start, nothing. Only clue is dmesg.
$dmesg
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:07.0: PME# disabled
e100: eth1: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
e100 0000:03:07.0: firmware: requesting e100/d101m_ucode.bin
ADDRCONF(NETDEV_UP): eth1: link is not ready
modrope -r e100 and then reloading it doesn't help either, but reboot does (once I had to reboot twice tho).
Anyone with more clue and ideas then me, it's getting really annoying, it also kill whole KDE plasma-desktop for couple of minutes before plasmoids find out network is really down and I'm not really fan of morning "gamble". I can't pinpoint some hard date/update when this started to happening because like I said it's random but last couple of months should be quite accurate. Thanks in advance.
EDIT: dmesg when network works:
tilen@pikmin ~]$ dmesg | grep e100
pci 0000:03:07.0: Firmware left e100 interrupts enabled; disabling
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:07.0: PME# disabled
e100: eth0: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
Last edited by NoOrdinary (2009-09-05 09:47:20)

I don't have anything special set at router but I doubt rc.conf play any role. I will try to set it up with dhcp (but I think I have tried that already) if there is any change.
This morning I had to reboot twice, so new kernel didn't help. Fowler, what network card are you using, also e100 (well or some intel)? I dunno, should this be handed to the kernel team? If it will piss me enough one morning I'll just go and buy a new network card, just wanna be sure that will really solve the problem.
UPDATE: OK, this is just silly. I remebered I have acctualy onboard LAN so I edited rc.conf and dived into the dust under my desk to move cable and there I found out it was acctual onboard in use all the time Now this dosen't make much sense to me anymore, when I can't get net up all the stuff in dmesg is e100 related. Anyway, I connected network to e100 and rebooted, suprise, same story. Dmesg reported again link was not ready. I edited rc.conf to
INTERFACES=(eth0 !eth1)
in case this has anything to do with proper timing at assigning whatever needs to be assigned to network cards at boot so I'm sure just 1 card with all info provided get's kicked in at boot. First reboot after that works, it dosen't prove anything yet but at leat it's some kind of progress in recognising proper cause.
UPDATE 2: Nah, still happens. Googling for "no link during initialization" show a lot of familiar problems, almost all on nforce motherboards and mine is nforce too. I just don't get it why this mess seperate PCI network card. In any case it's extremely annoying.
Last edited by NoOrdinary (2009-09-02 11:46:27)

My iPhone 6+ keeps rebooting after installing iOS 8.3

I have a 128Gb iPhone 6+. When I downloaded and installed iOS 8.3 via WIFI, it went through the usual download sequence and then started continually rebooting. After about 20 or so reboots, I got a white screen with a carrier signal on the top left, a location icon and a grayed-out bluetooth icon and the battery level indicator on the top right, and a curious "information" icon (a letter "i" in a circle) at the bottom right of the screen.
I tried tapping on the "i" but got no response. Then the iPhone went into the reboot cycle again. After several reboot cycles, I got the same white screen again. Then the iPhone again started rebooting and hasn't stopped.
My iPhone 6+ has been problematic since I installed iOS 8.1.2. Several random reboots (about 4 cycles, before the iPhone returned to "normal") and some other issues that I didn't document.
I brought the iPhone to the nearest authorized Apple repair center. They said that they could not find any problem and neither could they duplicate the issue I experienced. They recommended that the next time reboots happened that I should make a video of the error. Also, they recommended that I keep all of the apps updated (which I conscientiously do). So I decided to make a log of all the errors since the iPhone was returned to me.
Here are the entries to my log:
iPhone 6+ Errors since March 30, 2015
218 apps not synced
Failure to Sync - 0xE800002D - The app was not installed on the iPhone because of an unknown error
iPhone self reboot during reinstallation of 218 apps not synced
Missing Google Authenticator settings.
AutoSMS app could not be reinstalled. Doesn't exist in App Store.
iPhone self reboot during phone call. Some apps reinstalling in background.
Could not download additional sound modules for Soundprism Pro. Still could not download modules after reinstalling app.
Noticed keyboard error when inputting Apple ID password. When pressing keys, instead of character pressed, a question mark appeared. Photo taken with another phone. Could not do a screenshot because iPhone screenshot would not work.
iPhone self reboot during text messaging. 9 apps updating (April 1, 2015, 11:30am)
Audible could not log in properly. Tried reinstalling app.
After manual reboot (cold reboot), screenshot functions works and no noticeable errors with keyboard.
Turned on full access for Fleksy , GIF and Symbols Keyboards. (April 1, 2015, 12:20 pm)
Noticed all 3rd party apps (Kindle, Audible, Dropbox, 1Password, YouTube) credentials need to be re inputted.
iPhone self reboot while testing GIF keyboard. Pasted an animated GIF on a test text message. Was able to paste GIF then phone rebooted. (April 1, 2015, 1:41pm) reboot took approximately 2mins.
GIF could not be pasted into Viber message. Also noticed screenshot function not working. (April 1, 2015, 1:53pm)
After cold reboot, screenshot function works. (April 1, 2015, 1:57pm).
iPhone self reboot while installing Ask Video9 apps. (April 2, 2014, 12:32am). Reboot time approximately 2mins.
Noticed standard keyboard error ("?s" when key is pressed) appeared. Also screenshot function not working.
After warm reboot (Home-Power key), all functions work. Reboot time approximately 1min.
iPhone self reboot while updating RoomScan Pro app and installing Via Crucis app. (April 2, 2015, 7:53am) Reboot time approximately 1min.
Screenshot function not working.
After warm reboot, screenshot function works. Reboot time approximately 2 mins.
iPhone self reboot while installing Way of the Cross app. (April 2, 2015, 8:03am) Reboot time approximately 1min.
Noticed a duplicate of this note appeared with time stamp 3mins apart from this note.
iPhone self reboot while typing update to this note (April 2, 2015, 8:07am) Reboot time approximately 1min.
Noticed that Way of the Cross app fully installed and 5 other apps updated. Looks like reboots happen after app updates or installations.
Noticed screenshot function not working.
iPhone self reboot while installing iMassExplained app. (April 2, 2015, 8:18am) Reboot time approximately 1min.
Noticed screenshot function working.
iPhone self reboot while installing Candy Tech app. (April 2, 2014, 1:00pm) Reboot time approximately 1min.
iPhone self reboot while installing Google Chrome app. (April 2, 2014, 2:42pm) Reboot time approximately 1min.
iPhone self reboot while playing music through a Bluetooth device. (April 2, 2015, 7:30pm) Reboot approximately 1min.
iPhone self reboot while scanning barcode for MyFitnessPal app. (April 3, 2014, 10:40pm) Reboot time approximately 1min.
Noticed Microsoft Word app not activating.
iPhone self reboot while checking App Store app. (April 3, 2015, 1:05am) Reboot time approximately 1min.
iPhone self reboot while using Microsoft Word app and Google Maps. (April 3, 2015, 1:15am) Reboot time approximately 1min.
Noticed "?s" when typing password for Apple ID (April 3, 2015, 4:40pm) Reboot time approximately 2mins.
Noticed that Movie ads not working in Subway Surfers. Then checked screenshot function. Screenshot function not working. March 3, 2015, 7:42pm.
Manual reboot corrected screenshot function. Movie ads still not working for Subway Surfers.
iPhone self reboot while changing lock screen with wallpaper created by Homescreen app. Also Quest Keeper app was installing (April 4, 2015, 1:35am) Reboot time approximately 1min.
Screenshot function not working.
Manual reboot DID NOT correct screenshot function.
2nd manual reboot got screenshot function working. But Passcode entry screen had Home Screen wallpaper instead of Lock Screen wallpaper and screen taps would not register. Passcode entry only working when the screen was tapped and swiped up from the camera icon. When camera was activated from the non working Passcode Entry Screen, a new working screen appeared allowing Passcode entry and after the screen, the camera app was opened.
iPhone self reboot while downloading Bible Gateway app. (April 4, 2015, 1:55am) Reboot time approximately 1min. Screenshot function not working.
Manual reboot DID NOT correct screenshot function.
2nd manual reboot got screenshot function working.
iPhone self reboot while downloading trying to change Home Screen wallpaper. (April 4, 2015, 2:05am) Reboot time approximately 1min. Still could not change either Lock or Home screen wallpaper.
iPhone self reboot sharing/emailing document from iMports app. (April 4, 2015, 10:57am) Reboot time approximately 1min.
iPhone self reboot while installing Candle app. (April 4, 2015, 9:40pm) Reboot time approximately 1min.
iPhone self reboot while adding picture to phone contact. (April 6, 2015, 2:47pm) Reboot time approximately 1min.
iPhone self reboot. (April 6, 2015, 2:49pm) Reboot time approximately 1min.
iPhone self reboot TWICE. (April 6, 2015, 4:11pm) Reboot time approximately 1min each. Fuzel Collage app was updating.
iPhone self reboot while using App Store. (April 6, 2015, 4:15pm) Reboot time approximately 1min.
iPhone self reboot while using App Store. (April 6, 2015, 7:42pm) Reboot time approximately 1min.
iPhone self reboots TWICE successively while installing 7IHS 2015 2Q app. (April 7, 2015, 9:37am) Reboot time approximately 1min per reboot.
iPhone self reboot. (April 7, 2015, 6:25pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 7:00pm) Reboot time approximately 1min.
iPhone self Renoir while using Bieber app. (April 7, 2015, 7:37pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 9:14pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 10:45pm) Reboot time approximately 1min.
iPhone self reboot while copying message from Viber app to iMessage. (April 8, 2015, 12:39pm) Reboot time approximately 1min.
iPhone self reboot while playing music. (April 8, 2015, 2:34pm) Reboot time approximately 1min.
iPhone self reboot while playing music. (April 8, 2015, 2:37pm) Reboot time approximately 1min.
Music shuffles by itself from one album to another.
iPhone self reboot while playing music. (April 8, 2015, 2:57pm) Reboot time approximately 2min.
iPhone self reboot while installing How To Tie A Tie app. (April 10, 2015, 12:12am) Reboot time approximately 2min.
iPhone self reboot while downloading iOS 8.3 update and writing a text message. (April 10, 2015, 7:25am) Reboot time approximately 1min.
I hope the details can help you diagnose the issue.
Thank you for all your help.

Yeah my is the same. Ive had enough of it now...Its been a week of my phone crashing & apps crashing, camera crashing, call dropping out all the time. I've had enough. Apple have done nothing to help it. Ive an upgrade & myself & my partner are buying samsungs.
P.S I've downloaded both ios 8 & ios.8.2 straight from my PC.
I have done all of the above & phone is still unstable & crashes apps all the time. Right now as we speak whats app wont work.
Waited to long now...Apple are doing nothing to help anyone anymore. Company is going down the drain fast.

Reboot Twice

Similar Messages

Maybe you are looking for