Rebooting after it boot up once..[MSI 694T pro]

spec : PIII 1GHhz..
I busted my mainboard a week ago so I ordered MSI 694T pro to replace
well..it seems like working well
but after I leave the computer off for long time,
if I turn on the computer, the computer reboot itself automatically after it goes into Windows..
I thought it was ACPI problem. so I tried to flash the BIOS. I tried all version of BIOS, but none of those BIOS can't fix the problem.
Rebooting occurs only once when I turn on the computer.
After I can use without any problem.
Because of automatic reboot during booting up, Windows gets massed up...
is the board inferior? or is there any way to fix this problem?

I found the problem..
it was one of the memories..
One of those were broken. I tried switching network cards to find out the problems, but I couldn't find anything.
Finally, I parted everything and put those one by one..
oh my gosh...it was the stupid memory...
but still I have a problem
After I reinstalled win2k, one other blue screen msg came out.
Actually, it also came out when I used the broken memory, but I didn't mention about it b/c I thought every problem was from mainboard, which wasn't..
anyway, after I reinstalled w2k, it says this mainboard doesn't support ACPI, but it is supposed to be...
but this msg also comes out only once. After all, it never comes out again..but I just wonder why this happens
thx

Similar Messages

Need I upgrade My MSI 694T-Pro?

I have a mainboard which I have been using it over 5 years. Actually, I like it very much because it never making any troubles to me. Owing to it's high quality and suitability that I almost had not it repaired.
My favor 6309 V5.0, I had refreshed it's BIOS to new version V7.5 and it can support 160G HDD. Unfortunately, I am still using GF2 MX400 32M VGA card and PIII 1G CPU, I found my motherboard can support PIII-S tulatain and I dislike CIII so I wanna to purchase a PIII-S 1.4G and ATI9550 double 128M VGA card but I hesitate to carry out my plan at once.
For one thing, PIII-S 1.4G may be not well than my imagine, for another I have not known ATI 9550 can be used on my board because I have heard somebody often say it can't using in VIA board.
I am a fans of MSI and I have bought a new P35 motherboard now. However, I am not willing to dispose my 694T-Pro and I am using it like my close friend sometimes. For your surprising, My 6309 V5.0 still look like brandnew and I plan to using it 3-5years.
Need I upgrade My MSI 694T-Pro? Thank you ,very much!

Thank you for your reply!
Firstly, I am willing to upgrade my 6309 only for loving it deeply but I have owned a newly PC now, I have bought it last month and it is advanced as many people perfect. ( Q6600+P5K SE +2G*2 Kingston+320G 7200.11 +XFX 8800GT +TT KK550 +G1 +DVD SATA)
Secondly, I wanna to obtain good quality of screen display, meanwhile, I found it has little distinguish from new PC when I am just typing and suffering Internet. However, I had a amount of PC games under DX 8.0 so I need a stronger VGA card instead of my GF2, how about it?
Overall, I just use my 6309 for simple affair and I usually do more complicated work by means of new PC.
My question is , what a best VGA card can 694T-Pro be used ?
Thank you!

MSI 694T Pro USB

I Have a MSI 694T Pro (MS-6309 v5.0)
i have had trouble hooking up the front USB port plugs on my tower to the motherboard pins
does anyone have a diagram or description of what order the plugs should go in
Thanks

Pin 1 = Power Pin 2 = Power
Pin 3 = Data - Pin 4 = Data -
Pin 5 = Data + Pin 6 = Data +
Pin 7 = Ground Pin 8 = Ground
Pin 9 = Key or Blocked pin Pin 10 = Ground OC (open/no connection)
In your little depiction pin 1 will be upper left, pin 2 upper right, no pin 9, pin 10 lower right
Edit: looks like Richard got that one in there before I hit the post button.

Question of MSI 694T-Pro

My motherboard of PC is msi-694T-pro, although I 've updated BIOS to the latest V7.5, I feel it so low in speed. For instance, I used Windows tool to testmy PC and find it cann't exceed my 815EPT, especially in VGA card and SDRAM!
My PC:
694T-Pro (v7.5 BIOS)
PIII 1G
HY PC133 512M
DVD-ROM
GEFORCE4 MX440SE 64M
160G HDD
May I need to purchase a PIII-S 1.4G CPU, can it improve my PC'speed as much as possible?
Need I change ATI Radeon 8500 VGA card instead of my old card?
How to renew my PC assemblies in high effiiciencyand economy?
Thanks!

Welcome to the forum
The fastest PIII cpu that is supported by your motherboard is a 1.26 Tulatin core. Check the cpu support chart.
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=281&maincat_no=1&cat2_no=&cat3_no=#menu
Do you have 4x agp enabled in your bios? Your video card is able to run at 4xagp.
Does your cpu have the 100Mhz front side bus? If the cpu has a 100Mhz fsb and the memory is set to run 1:1 with the cpu in the bios, then the memory is running at 100Mhz as well instead of the 133 that it is rated to run at.
Setting the memory to run at Auto or SPD is the bios will help speed the system up a little.
I would not spend any money on it to try and speed it up if it was mine. Save that money and add to it until you can purchase the components to build a new system. That will give you the best return on any investment you might make for computer parts..

MSI 694T PRO

hi
im using MSI 694T PRO that come with usb nic,is there any way i can disable usb nic and make my pci nic working?i already disable usb controller in my bios setting but the result still the same

Did you enable onboard LAN back in BIOS?

PLZ HELP: BB TORCH 9800: not able to start ,keep on rebooting after 70% booting. plzzz.. its urgent.

Hi,
i m using bb torch 9800,i installed viber app from bbworld .During instalation, it automaticaly went for restart.n till now it is rebooting everytime after every70% complition. its just like a do loop.
1.i removed battery so many times kept back..but no way.
2.i tried to start with safe mode for rebooting,but that also doesn't work.
3.charged battery fully ,then inserted,stilll same condition.
what to do? no way .i tried my best with these ideas what i got here on this foram,but didnt work.thats why i m writing seperately..PLZ HELP ,I M HELPLESS FROM LAST 7 DAYS...

sorry bout the delay you can follow these instructions
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

MSI 694T Pro AGP and PCI clocks in OC

Hi!
I wonder about when raising FSB on this motherboard; will there be any divider for the pci and agp clocks, so the pci stays at 33 mhz so I don't mess up any hardware there? And what about the AGP? ?(
specs are as follows:
1.2 celeron (100*12)
ATI Radeon 7500
I'll be happy for all responding! )
And excuse my english please!

Hi Assaf,
This gets to be more of a mystery!
Quote
Originally posted by Assaf
During the post there is a table with all the detected PNP devices and the IRQ they got from the bios.
Is there a \"PCI multimedia device\" listed there ?
No, there is no sign any such a device in the boot up information, which is a bit strange isn't it? It lists my other stuff o.k. - see below.
What other PCI cards do you have?
I have the following installed:
Network Adaptor 1: Realtek RTL8139(A)-based PCI Fast Ethernet Adaptor. The driver for this must be included in Win 2000 as I didn't have to install anything for it.
Network Adaptor 2: BT Speedway ISDN PCI Card Rev. A (Win 2000). I had to install the driver for this from the supplied CD.
Video Adaptor: NVIDIA RIVA TNT2 M64/M64 PRO. I installed the latest unified driver from NVIDIA (Version: 44.03
Release Date: May 14, 2003).
What puzzles me most is that when I rebuilt the system I started out with just the video card installed and no other adaptors (the card was using the Microsoft supplied driver) and there was no sign of the sound system then. So, unless there is something fundamentally wrong with the motherboard surely the sound should have been detected?
Cheers and thanks for your help.
Roy

MSI 694T Pro support 1.4GHz Tualatin?

Yes or No?

Stop!!!
Cant agree on that the results are now available.
http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=20

MSI 694T Pro with coppermine 1ghz, how to overclock?

hello !
I've tried everything, but without result...
I have pentium coppermine (celeron) 1ghz.
please, can you tell me (step-by-step) how to do the overclock...
cooler is spire WhisperRock III
(now, the temperature of processor is about 20°C)
(fuzzy logic doesn't work in winxp - error: "privileged instruction")
Thank You !!

Go to BIOS and increase the FSB speed.

694t pro 2beeps after bios upgrade

Hi,
I have an MSI 694t pro with a via chipset (vt82c694) and I was having problems with a sound card installation so I tried to upgrade the bios. I used the bios on http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=20&kind=1 which was file name 6309v75.exe
I unpacked the files and rebooted using a dos boot disk. I ran the command for the bios tool with the path for the bios file (can't remember name exactly but something like... a:\avpl??.exe a:\temp\nameofbiosfile.708
After rebooting I do not get any post... all I get now is an infuriating beep beep which happens in about a second, followed by a 1 second pause and then those two beeps in a second again followed by a 1 second pause and this goes on and on continuos. I seem to recall a SIS agp logo when the motherboard used to work. The lights from bottom to top und jacks on the motherboard light up red, red, green, red.
Does anybody have any ideas what this problem is and how to work around it please?
many thanks
Wayne

http://bioscentral.com/beepcodes/amibeep.htm
reseat vga card and ram
Clear CMOS Guide

Oracle VM 3.1 Server automatically reboots after - stopping it

When I try to stop my OVM 3.1 server, using shutdown, or init 0 the server stops, but automatically boots again....
Anyone run into the same problem?
Thanks for all your suggestions
Rob

dave wrote:
The OVM server? Yes OVM Server :)
I've not seen this before. It could be that the hardware doesn't support the poweroff signal from the OS. Although I'm not sure if it is that much of an issue, as you rarely turn off / on the OVM servers themselves. You can easily power it off if it does a reset not a poweroff.The reboots after "init 0" disappeared once after I added a third NIC to my box, and dedicated it for virtual machines
ie, my Windows 7 box, on which I setup the entire VM infrastructure using VirtualBox has 3 NICs. Two for the VM Server, and the third one for the VM Manager.
The second NIC with VM Server configured to handle the traffic from Virtual Machines, isolating the 1st NIC for all other VM Server traffic. No more rebooting with VM Server and always shuts down with a "init 0"
Hope this info is useful for few others out there
regards,
raj
Adding something I missed with last post
Following sequence is always used to shutdown the VM Server as my setup has NFS shares setup from VM Manager server itself
1. Shutdown VM Server first (Stops all heartbeats etc gracefully)
2. Stop OVMM service on VM Manager server
3. Shutdown VM Manager Server
Edited by: Raj Thampi on Aug 18, 2012 11:45 AM

Were any reboot after sleep problems NOT fixed by the EFI firmware update?

The subject says it all. I wanted to get a read on whether this EFI update really did solve the reboot after sleep problem for all 2008 Mac Pros. If have an early '08 Pro that had the problem before the update and it didn't go away after the update (and it's not due to some other problem like kernel panics, etc.), then please post details in this thread. thanks!

We have 4 total systems (all had the issue, all slightly different configurations) and the reboot-on-wake issue has disappeared on all 4 of them.
Looks like a definitive fix to me.

Help! 694T Pro (MS6309) not working...

I have a MSI 694T Pro (otherwise known as a MS6309) which worked very well until a few days ago when I changed my cpu cooler. Now it POST's perfectly and I can enter and use the BIOS setup but it simply hangs when trying to boot (HDD, CD or Floppy). The D-Leds say that it's trying to boot.
I have a thesis to finish by the end of the month so I really need my computer.

I did remount the original cooler (with plenty of heat goop) and checked every cable. The hard drive, floppy and dvd are all detected properly, and the cpu temperature and cpu fan speeds give nice healthy readings in the bios...

694T Pro and Asus v8200 video card

I can't seem to make my MSI 694T Pro run at AGP 4x mode with my Asus v8200 (a GeForce3 video card). It's running at 2x only with this card, but with GeForce2 cards it runs at 4x. I tried different versions of nVIDIA drivers and updating the BIOS to no avail.
Any ideas?

Okay, this is starting to suck, my new Mac Pro is acting up too. I have posted about crashing to another thread where NVChannel has problems and the screen freezes. And now I have this problem too. It's hard to get any new windows to appear (such as context lists, menu views or just normal application windows).
And my log is full of this:
28.2.2008 21:43:48 Dock[356] CGSResolveShmemReference : reference offset (65376) exceeds bounds (32768) on shmem obj 0x4a6e
28.2.2008 21:43:48 Safari[532] CGSResolveShmemReference : reference offset (65296) exceeds bounds (32768) on shmem obj 0x4f1d
28.2.2008 21:43:48 Safari[532] Error (1000) creating CGSWindow
28.2.2008 21:43:48 Dock[356] CGSResolveShmemReference : reference offset (65296) exceeds bounds (32768) on shmem obj 0x5879
28.2.2008 21:43:49 Safari[532] CGSResolveShmemReference : reference offset (65232) exceeds bounds (32768) on shmem obj 0x641a
28.2.2008 21:43:49 Safari[532] Error (1000) creating CGSWindow
28.2.2008 21:43:51 Safari[532] CGSResolveShmemReference : reference offset (65232) exceeds bounds (32768) on shmem obj 0x641a
28.2.2008 21:43:51 Safari[532] Error (1000) creating CGSWindow
28.2.2008 21:43:48 [0x0-0x8008].com.apple.dock[356] Thu Feb 28 21:43:48 myhost.com Dock[356] <Warning>: CGSResolveShmemReference : reference offset (65376) exceeds bounds (32768) on shmem obj 0x4a6e
28.2.2008 21:43:48 [0x0-0x21021].com.apple.Safari[532] Thu Feb 28 21:43:48 myhost.com Safari[532] <Warning>: CGSResolveShmemReference : reference offset (65296) exceeds bounds (32768) on shmem obj 0x4f1d
28.2.2008 21:43:48 [0x0-0x8008].com.apple.dock[356] Thu Feb 28 21:43:48 myhost.com Dock[356] <Warning>: CGSResolveShmemReference : reference offset (65296) exceeds bounds (32768) on shmem obj 0x5879
Here is a screenshot some of the graphical mess I have now: http://img3.freeimagehosting.net/uploads/32f69aaf83.png

After selecting "login as guest" MBP reboots and only boots in OS X Utilities mode

Yesterday, I started my mac. I wanted to use the guest account and my mac told me to reboot for that option. From that time, my mac only boots in OSX Utilities mode and there's no way to get there out.
When I used detailed login stats, it seems that it's unable to open the var/db/bootcache,.playlist (no such file or directory)
I'm running 10.8 - my disc is encrypted
Try to find some help on Google without any results

Hey!
Of all the things you tried you didn't try these things:
go to the recovery partition by hold CMD+R while booting.
Once there, go to the Disk Utility area and Verify and repair your disks and permissions
after doing that with successful results, go and reinstall Mountain lion.
This may or may not fix your issue.
if you don't want to do that just yet, you can see if it is an application that you have downloaded that may be the issue. simply go to system preferences and choose Users and Groups and create a new user.
Log in to the new user and see if your issue persists.
When is save mode go to system preferences Users and Groups and go to the Login items and uncheck all of them.
These are the steps I would have taken first. Try these ones and see if you don't fix your issue. If you figure out what app is making you constantly restart, please let us know what it is so others may be able to solve the issue faster.

Rebooting after it boot up once..[MSI 694T pro]

Similar Messages

Maybe you are looking for