Rebooting Gateway server drops all clients in a serverfarm?

Hi,
I just rebooted my gateway server (Win2012R2) and all clients in entire RDS farm (3 RDSH servers) was kicked (logged off).
Is this normal behavior?
Thanks.

Hi,
Thank you for posting in Windows Server Forum.
Please specify if you can find any Event ID for this issue on any server.
As per my research, if you force your client connection passing through the RD Gateway and then if you will restart RD Gateway then naturally client get disconnected from their session. Because the connection is passing through Gateway client can’t find connection
path and thus the connection drops.
Please go through below article for information regarding RD Gateway.
How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

My Verizon MI424WR router resets and drops all client connections without my intervention

I have noticed my devices lose their Verizon MI424WR router and Internet connection (wired and wireless alike) for some time now (months) on a regular basis. Sometimes multiple times a day and at different times of the day. You typically have to be actively using a device to notice these events. I have one client that will display an "Internet Connection Restored" message until I return to view it and I can see that this happens quite frequently overnight when there is minimal Internet usage. During a recent "outage" I quickly ran to the router to find it was in the process of rebooting, however, I did not perform any direct actions (e.g., cycling the power or applying admin config changes) that would have caused it.
What is/could be the cause of this? Is Verizon support pushing silent router maintenance updates that require resets? Am I exceeding the maximum TCP connections the firmware will allow before faulting to reboot? I require high availability and uninterrupted connections and would prefer to know the routers limitations or when any remote automated maintenance requiring resets will be occurring if that is in fact the cause.

My router routinely runs for months between resets, which are caused by me needing to move a cable or a similar. Only once did I notice a reset due to a Verizon update, and that was when the firmware was updated a year or so ago.
You can check the router's up time on the "system monitoring" web page. This will let you know when the last reset occurred.
You should not see resets unless you cause them. The symptoms you describe are not typical. You might need a new router. If you think so, contact Verizon support.
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Windows Server 2012 Essentials (not R2) - all client computers offline

The server is Windows Server 2012 Essentials (not R2). I have had this problem ever since I first installed the Windows Server 2012 Essentials server in the summer of 2013 (before R2 was released). The Windows Server 2012 Essentials server shows offline
for all Devices under Dashboard. (Allow me to add that I just installed another site with Windows Server 2012 Essentials R2, and it was a breeze - all of the computers at the second install site are online.) I have one Windows 8.1 Pro client and the rest
are Windows 7 Pro clients. The problem occurs on ALL client computers.
I have removed computers from Devices in Dashboard on the server, rebooted the server, changed the client computer to a workgroup, rebooted the client computer, and reinstalled the connector software on the client computer. Same result. I
have tried this on a Windows 7 Pro client and a Windows 8.1 Pro client with the same results.
After running the connector on a client computer and waiting for the server to update its Devices status, if I look under Devices on the server Dashboard, the Windows 8.1 client computer will say online but within 24 hours it goes offline again. The
Windows 7 client computers never show online. Both computers stay offline - they NEVER show an online status (referring to the status under Devices in Dashboard).
I should make it clear that the clients can access the server shares with no problem. File synchronization works great. The clients can ping the server and the server can ping the clients. But client backups on the server fail.
One of the most troublesome things about this problem is that it prevents the client computers from being accessed remotely using the website setup by Anywhere Access. I can login to get remote access to the shared files on the server, but
the only computer that says "online" is the server. All of the other computers are "offline".
The server and clients are only using Windows firewall. The clients all use Microsoft Security Essentials for their anti-virus.
I used a troubleshooting tool that tells me that there are problems with port 6602 on the server, but the clients are all fine with port 6602. I know port 6602 is important for using Anywhere Access but I am still trying to find out more details on that.
I have checked all of the firewall settings related to port 6602 on the server, and the firewall settings look like the standard Windows settings for this port. I used netstat to find the PID associated with the port, and I looked up the PID to find the service.
That all looked standard, too.
I have been working on this problem since the summer of 2013!! Does anyone have ANY suggestions?!!
HELP!

Hi,
Just addition, please check if all necessary Windows updates are installed on those
“Offline” client computer.
When connect client computers to the Windows Server 2012 Essentials server by using the Connector software, there
will be LAUNCHPAD on the client computer. Was this LAUNCHPAD grayed out? Please check if can access Shared Folders via this LAUNCHPAD. Meanwhile, please ping the Windows Server 2012 Essentials via IP address and server name when client computers show as
Offline. Any find?
Get Connected in Windows Server Essentials
In addition, please follow the path on Server and client computer:
%programdata%\Microsoft\Windows Server\Logs. Did you check any relevant Server-side logs and
Client-side Logs if find more clues?
Windows
Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Almost all clients status as Inactive

In one of our secondary server , almost all clients status showing as Inactive. Why its showing as Inactive or how to troubleshoot to check on this

Have you already examined if the MP on the secondary site and that replication are still working?
Torsten Meringer | http://www.mssccmfaq.de

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you

How get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?

Hi,
I have a RVS4000 router with DHCP enabled and in router mode.
The LAN is 192.168.2.x. The RVS4000 static IP address is 192.168.2.8
The router is not the RVS4000 and is at 192.168.2.1
The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1.
How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
Thanks

Hi Gail, you cannot do this. The router, as the DHCP server will only assign a default gateway of what IP interface the DHCP server runs on. If you have the default IP, the gateway is 192.168.1.1. If you create a second vlan, by default it would be 192.168.2.1.
There are not configuration options for the built-in DHCP server. If you'd like to expand this functionality, you would need an external dhcp server.
-Tom
Please mark answered for helpful posts

How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?

How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?
I tried using DROP Tables, Truncate Database, Delete and many more but it is not working. I want to delete all tables using Query Analyzer, i.e. through SQL Query.
Please help me out in this concern.
Nishith Shah

Informative thread indeed. Wish I saw it early enough. Managed to come up with the code below before I saw this thread.
declare @TTName Table
(TableSchemaTableName
varchar
(500),
[status] int
default 0);
with AvailableTables
(TableSchemaTableName)
as
(select
QUOTENAME(TABLE_SCHEMA)
+
+
QUOTENAME(TABLE_NAME)
from
INFORMATION_SCHEMA.TABLES)
insert into @TTName
(TableSchemaTableName)
select *
from AvailableTables
declare @TableSchemaTableName varchar
(500)
declare @sqlstatement nvarchar
(1000)
while 1=1
begin
set @sqlstatement
=
'DROP TABLE '
+ @TableSchemaTableName
exec
sp_executeSQL
@sqlstatement
print
'Dropped Table : '
+ @TableSchemaTableName
update @TTName
set [status]
= 1
where TableSchemaTableName
= @TableSchemaTableName
if
(select
count([Status])
from @TTName
where [Status]
= 0)
= 0
break
end

All clients drop association at the same time

We are seeing clients dropping their association with few APs all at the same time and would not connect back for several minutes (or even hours). And all of a sudden, they are start to connect back normally.
Wondering what can cause these kind of frequent client disconnects? Only a section of the building is affected and the remaining areas are fine.
Also, at times, I see the signal strength varies between Excellent and Poor within few seconds.
We are using LAPs and WiSM.
Any help would be appreiciated.
Thank you,
Mohan

Its in the 2.4 GHz band. I have observed this behavior. It works well for a day or two and suddenly a couple of APs only drop all the clients all at the same time. After few minutes (or hours) they are connect back to the APs fine.
This repeats 3 or 4 times in a week.
Thanks,
Mohan

Gateway Server address and Certificate subject name do not match error on Vista client

RD Gateway server is 2012, RD Server is 2008 R2. Client is (currently) Vista Gold (surprised me too).
User was able to connect through the Gateway in the past, but seems to have broken around the time that we switched to a real wildcard SSL certificate. Prior to this, it was using a self issued cert.
I'm stalling for time (and hoping this fixes it) by having the user install the Vista Service Packs. Can anyone verify if this is what's causing the issue, or if I need to look at something else?

Hi,
Yes, updating should fix the issue--the old client versions didn't work properly with wildcard. I recommend you have them install the latest version of the Remote Desktop Client for Vista which is RDP 7.0 capable:
Description of the Remote Desktop Connection 7.0 client update for Remote Desktop Services (RDS) for Windows XP SP3, Windows Vista SP1, and Windows Vista SP2
http://support.microsoft.com/kb/969084
-TP

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

Echo to all clients connected to NIO server

I am writing a NIO xml socket server that uses NIO.
My model implemensts a producer / consumer system where client connections are accepted and processed by a specified number of worker threads.
I would like to be able to broadcast a message to all clients that are connected to the server.
Opinions / suggestions I am sure that this is quite a common type of functionality.
Kind Regards

Accendia server is implementing a callback mechanism that allows the server to notify the client.
This is not broadcast, you would have to call each client (www.accendia.com). For real broadcasting use datagram or multicast sockets (depends on different factors) on both client and server in addition to the sockets used as part of the NIO server.

Broadcast to all clients connected to NIO server

I am writing a NIO xml socket server that uses NIO.
My model implemensts a producer / consumer system where client connections are accepted and processed by a specified number of worker threads.
I would like to be able to broadcast a message to all clients that are connected to the server.
Opinions / suggestions I am sure that this is quite a common type of functionality.
Kind Regards

Accendia server allows the server side to invoke callback objects on the client. You can't do real broadcasting, though, you would have to iterate through all client connections. See if it helps:
http://www.accendia.com
If you need real broadcasting you can use datagram or multicast sockets on both the server and client side.

AE Dropping all connections randomly and then rebooting.

The problem I am having is my Airport Express will randomly drop all incoming and outgoing connections. This usually happens when I am running AirPlay via my AppleTV and using the internet at the same time. I only have a 1Mbs/s speed. I was watching American Gangster yesterday and redownloading my music on itunes, and suddenly it drops and gives the "You need to be connected to home sharing" then it switches and says I am not longer connected to the internet, then a few moments later it connected again. This IS the AE right? It has to be if the internet is cutting out as well, it wouldn't be just the Mac's Airport card. Should I just get it replaced?

Here you go. Thank you
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
6.1 dB / 5.8 dB
Line attenuation (Down/Up)
27.5 dB / 13.5 dB
Output power (Down/Up)
0.0 dBm / 12.9 dBm
Loss of Framing (Local)
11
Loss of Signal (Local)
1
Loss of Power (Local)
0
FEC Errors (Down/Up)
223864 / 0
CRC Errors (Down/Up)
6 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
15
I should also mention that I have already tried changing the channel using inssider to one not currently in use without success.
Cheers

Path does not exit - While trying to save file on SharPoint Server 2013 from client machine

Hi,
I have installed Microsoft SharePoint Server 2013 Enterprise Edition on my testing Lab environment (On VM Workstation 10) on Windows Server 2012 with SQL server 2012, I can access all files stored at SharePoint Server from any physical machine, I can share
a single file among different people to work simultaneously, but here i stuck on saving any file from client machine to directly on SharePoint Server, Attached is the snap shot, whenever I try to save any file directly It says Path Does Not Exist, If I drag
and drop any file directly to SharePoint I do not see any error message.
I read from different posts that I need to Enable Desktop Experience Feature on Server 2012, which I installed but no positive result gained :(
I will appreciate for any possible help?
Ali

Hi Ali,
Please try disabling the protected view per the link below and test the issue again:
http://social.technet.microsoft.com/Forums/en-US/b8381a19-3394-406f-8adb-1976f45460ef/path-does-not-exit-while-trying-to-save-file-on-sharpoint-server-2013-from-client-machine?forum=sharepointgeneral
You could simply type the url as http://sp/sites/sitename in the Filename place.
Regards,
Rebecca Tu
TechNet Community Support

Rebooting Gateway server drops all clients in a serverfarm?

Similar Messages

Maybe you are looking for