Rebooting Palm Z22 after hard reset

I have a Palm Z22. It was freezing and would not respond to taps so I did a Hard Reset. Now the screen is stuck on the first page where one has to tap on the centre of circles, bottom right and top left. It does not advance to the choosing the language, nor cannot I do a HotSync. I do have all my information on my computer. Can anyone help me advanceand be able to use my Palm Pilot?
Lester
Post relates to: Palm Z22

Lester, check for a "screen wedgie" - grit caught between the frame of the device and the screen.  It could be causing phantom screen presses, and make the calibration routine fail.
Try using a slice of a credit card, or a piece of paper folded into a scoop. 
Do you have a screen protector on it?  Try removing it.
It is possible your screen has failed...       Repairs would cost more than a new unit.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Touchscreen calibration issues on palm tx after hard reset

    my palm tx touchscreen stopped working.so i did hard reset and deletted all data.now when it reboots, i see the screen with the bullseye target and stylus.i am unable to calibrate the screen with stylus.if i keep touching the screen with my finger,the target would move to the other corner and it keeps on doing this, and i can not get past this screen.IS THERE ANY FIX FOR THIS PROBLEM.PLEASE POST
                                                THANKS
    Post relates to: Palm TX

    Hello and welcome to the Forums.
    Unfortunately if you have truly done the hard reset as stated and the issue persists, the only thing left at this point is to setup a repair or replace of the device.
    To discuss repair options you can contact us at 866-935-7256 to see what the options are. Also you can go to DirectFix.com and they have replacement parts and do repairs as well.
    Hope this helps.

  • My ipod shuffle (4th gen) don't works after hard reset with itunes

    My ipod shuffle (4th gen) don't works after hard reset with itunes, it don't reads too like USB by Windows.
    Before that i've seen error (-50) in iTunes, so i reset ipod.
    I've read all tips on this site, but nothing helps me.

    No, USB works good. I've tried reset on my friend's PC, and it saw my ipod and reset was done. But when i tried to load music, it wrote me, that i've installed incorrect software.

  • Re-install N97mini after hard-reset

    Hey,
    I already paid the Software by credit card and downloaded it directly on the mobile phone.
    Few days ago I had troubles with my phone and I couldn't start it anymore. After hard-reseting it, it worked again.
    Unfortunately all software is gone now.
    When I start the Adobe Reader mobile it says "10 days trial" version. Do I have to pay again?
    Thanks for your answer

    Hey
    no you don't have to pay again absolutely, just download it again and insert the code received by mail
    Good luck

  • 8350i uncaught exception java.lang.NullPointerException after hard reset

    basic info:
    8350i
    v4.6.1.204 (Platform 3.0.0.73)
    Desktop Manager 4.7
    everything is good except that i've been using two batteries, one in the phone and one in a charger. when the phone's battery is almost drained i swap it with the charged one which of course causes a hard reset.
    this procedure was working well for at least a week or two until last month when i swapped batteries - after the hard reset i got
    uncaught exception: java.lang.NullPointerException
    i could make calls but all other software seemed corrupted... virtually nothing else worked... icons missing etc.
    tried all sorts of solutions but the only thing that fixed it was a full on device software erase/reload, then a data restore from previous backup. at the time i figured it was just a random thing and was glad to learn how to do a complete software reload.
    then yesterday it happened again (again, immediately at the end of the security check after hard reset). now i'm afraid to swap batteries because it would appear that every time i hard reset there is a 10% (my guess) chance of software corruption and a complete reload takes a significant amount of time.
    has anybody else noticed this? does anybody have a solution?
    can i swap batteries without a hard reset; i.e. swap while plugged into power? i haven't tried this yet for fear of causing my BB harm.
    any help is appreciated,
    john d.
    Solved!
    Go to Solution.

    Hello, John.
    Make selective backup as it is described here:
    http://supportforums.blackberry.com/rim/board/message?board.id=8100&view=by_date_ascending&message.i...
    Backup only information that you need.
    There is described the purpose of every database you can observe when you're doing the selective backup:
    http://www.blackberry.com/btsc/KB03974
    When you have done selective backup do the following.
    On your device go to: Options - Security Options - General Settings
    Open menu and select "Wipe handheld"

  • My iPhone randomly reboot..even after i reset it to factory setting, it still happen...can u help me??

    my iPhone 4 randomly reboot..even after i reset it to factory setting, it still happen...can u help me??

    As far as I know you can't delete the primary email address for an iCloud account.  It's assigned when the account is created.  But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password.  Are you sure the account wasn't still on your phone when you gave it to him?
    You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
    I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't.  Make an appointment with the genius bar at a nearby Apple store and have them take a look at it.  If necessary, they should be able to contact iCloud support for you.

  • Battery after hard reset on Lumia 800

    Hi
    A few days ago i did a hard reset on my Lumia 800. Since that everything was great, the only reason why i did it, to restore the default settings. After that i updated the firmware to 12070 via Zune. Since that day, my phone doesn't really know how much  percentages are left from the battery. Sometimes It's showing a consant value for a long time, then suddenly begins to drain, and after a few it stops. It often happens, that it shows a value, and after an hour it shows a higher value (in percentage) than beforehand. 
    Today I let It to discharge to 0%, and then i pluged it to the charger. When the phone turned on, it showed me 5%.
    It's lifetime havent changed so spectacularly, but i guess its a bit shorter with the same usage.
    Is this behaviour normal after hard reset? 
    Thanks 

    After update my lumia 800 is failing to recongnise earphone. It keeps playing music on speaker. If I restart my phone then for few mins it is playing music in earphone. But after few mins once again music playback is starting through speaker.
    what should be the problem? will hard reset solve this problem? If yes, how to hard reset nokia lumia 800.
    Thanks in adv,

  • N8 Cant remove Topapps even after hard reset

    Hi,
    Few hours ago I just bought a new N8. It has in it TopApps and Ovi store, I wanted to remove Topapps but it continue to deny the operation. I tried soft reset, hard reset and in the ned 4 buttons reset. I tried also few solutions offered here in nokia forum but still without any sucess. I cant remove TopApps or Ovi Store even after hard reset, the maps are also here - I thought that these apps will disappear after hard reset.
    In applications I got 3 ovi store related apps installed - ovi, Ovi notifications support package and Ovi Store. Social network app is not working too, its showing me service unavailable. Any ideas ?
    Thank you for attention
    Solved!
    Go to Solution.

    Hi rslid,
    Nokia Store or rather Ovi Store is not deletable or uninstalabe as this is one of the applications that is necessary to enable you to download and update downloaded applications to your Nokia N8-00 Belle. If you try to delete or unistall you get the message operation denied so its better if you leave it.
    Concerning hard resetting, any time you feel like hard resetting your device use *#7370# followed by 12345 as the default security code unless you have manually changed it but always remember that it will delete all user data from both drive C and E hence a backup of your data with the phone settings unticked or not selected is strongly recomended before hard resetting and also note and remember that after hard resetting always reinstall your firmware to avoid having an unstable device.
    Ngwangwa - Six Million Ways To Die Choose One

  • After hard reset my time capsule is not found in airport even though its light is green so cannot reset

    After hard reset the time capsule is not found in airport even though i have reconnected in proper order - says backup disc not found

    Something is wrong because a hard reset will never leave the TC with green LED.
    What version TC.. what firmware??
    What OS on the computer?

  • N85 going slow after hard reset - help

    Hello
    I did a hard reset on the phone and now everything is going really slowly, especially messaging. Any solution please? Do I download new software and how?
    thank you.
    Message Edited by mark24601 on 05-Nov-2009 02:48 PM

    Make sure there is nothing installing in the background at times after hard reset the phone tries to install some applications that was stored in the card, so wait for sometime or try installing applications on the phone removing the memory card.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • My 3GS has stopped playing any games even after hard reset.

    My 3GS has stopped playing any games even after hard reset. Touching the game icon, brings up the game screen but then immediately returns to the main menu.

    Hi there Casa_Pacifica,
    You may find the troubleshooting steps in the article below helpful.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    -Griff W. 

  • Ovi Store Not Installing after Hard Resetting c7

    Hello Nokia. M from India and new here... Plz help me. After hard resetting by three buttons (home,volume,camera) everything gone like ovi store,ovi maps, social,and many other apps in video and tv.and now when i m installing ovi store it says unable to install.. I also went to Nokia care center to reinstall the software bt still not ovi icon.plz help me
    Solved!
    Go to Solution.

    Hey Frnds Ovi Store Is Working.............yupppyyyyyyyyyyyyyyyy Finally it installed on my c7 and n8 too......
    What should hv to do(for those whose ovi is unable to install):
    * just Format your phone via *#7370#
    * And after that no need to install any qt etc software,just check for SW update in your device.
    * And it will show an update of ovi store about 15 MB .
    * Thats it.
    why it was not showing an update before?
    ans. because i hv installed qt 4.7 and qt webkit.so SW update wasn't showing any update.
    I will request admin to move this thread to Solution section...
    thanx to every one 4 repling

  • Plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my l

    Re: plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my la
    its not connecting y?i think its software got corrupted,i think i should charge it first with a battery charger and when apple logo appears i should connect with pc,but i dont know how 2 open the back cover and how 2 remove the battery,i phone battery is removable or not?i mean it is fiz or wot?

    Recharge.  Reset.  Restore.

  • Palm TX replacement unit has white screen issues even after hard reset

    I hope somebody can help me find a solution.
       I was a happy Palm OS user since the early days of Palm III.  After a Palm III and a V, had a Sony Clie that lasted a long time, but finally pooped out, went to a Z22 and broke the screen, then almost but not quite a year ago (in warranty, supposedly), purchased a Palm TX.  Worked great for a while but ended up with a unit I couldn't turn on or off because the power switch had died.  Worked around that by keeping the sync cord in and powering on by pushing the button and then canceling.  Finally sent it in for in-warranty repair.  Got back a new-to-me unit.  
       This worked fine for almost a month, then it started (with no new software or usage patterns) to have blank screen issues.  To solve this I have tried many things.  Soft resets, hard resets, leaving it to fully run out its battery for weeks at a time.  Nothing works; it continues to go blank on me.  In addition, the sound is strange and screechy when it beeps (e.g. accepting time zone after reset).  I bought the TX in the US when I was home for a visit last July, but am living in the Netherlands currently.
       I contacted the Palm repair center in the UK that replaced my original unit; they said would pass on word of my troubles to Palm and Palm should contact me, otherwise to e-mail them.  They haven't.  I can't find an e-mail address for to explain all of this to anyone with any power to help me.  I have tried to use the Palm support website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now is showing up as eligible for warranty repair.  I have tried to call the US Palm support number (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "calling is temporarily unavailable."  When I click "here" when asked "If you wish to query the warranty status of your handheld, or would prefer to arrange a repair through our Technical Support service, click here" (https://www.euroservice.palm.com/repair_entry/NLD/EE) I end up on a page that says simply "Please Enter the Source Url."  I am hesitant to supply credit card information for an issue that, if it can't be covered under warranty (which I think it should be, since I'm still within the original 12 month warranty period), I may well abandon.
        I am very frustrated in trying to get this fixed.  I am disappointed in the dwindling support for a PDA (that is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, reader, dbs, cookbook, checklist, etc., I am seriously considering leaving the Palm OS.  My preference is to get this fixed, and my idea nearly a year ago was to ride the Palm OS until it disappeared completely (subsumed into phones anyway), but my problems have discouraged me to the point that I am wondering if this is my end.
       Does anyone have a suggestion?
    Post relates to: Palm TX
    This question was solved.
    View Solution.

    Thanks for your help!
    I don't know how to tell for certain if this is a US or a UK device, but it looks identical to the one I bought in a store in Seattle, and the first five and the last two num/letters of the serial number are identical.  I do know that when I sent it in originally for the power button failure, that the Palm repair center understood that it was a Palm purchased in the States.  Their description of the goods received is "Palm TX , US and ML" so it seems apparent that they knew it was a US device and rather than refusing to repair it, they had me send it to them.  And when my repair was returned, the repair details list "unit exchange" and type of unit is again listed as Palm TX US & ML.
    Well, regardless, I appreciate your pointing me in the right directions to someone who can help me.
    Ironically, I am no longer having the same issues with the Palm.  The latest round of letting the power run out after a hard reset and sit for a few weeks seems to have "fixed" it.  At least, I have been trying to break it (by using it) without success.  Recharged it, synced it, checked and sent mail with it, used all the programs I used to, and I haven't had a white screen in the past few days.  Hope my luck continues, but I don't trust it.  All hail frequent syncing.
    Thanks again. 

  • Palm TX Won't Keep User Account ID After Hard Reset

    I downloaded some malware and it froze my TX. I had to do a hard reset and when I went to resynch everything I got a dialog box that said that my handheld didn't have a user account ID and I got the choice of selecting an existing one or creating a new one. So I selected "existing" and it went through a very long process of reinstalling everything. So then I had another item to install, and instead of just installing that item, I got the same dialog box and EVERYTHING reinstalled.
    Since then I've tried everything I could think of, changing the ID, creating a new ID, and still I get the same dialog box and no matter which option I choose I have to put up with it reinstalling EVERYTHING.
    Plus software that is ID-dependent won't work since it's looking for the ID that is hooked to the unlock (Acid Spider, for example)
    This is getting tedious and I need help!
    Post relates to: Palm TX

    You may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
    XP
    C:\program files\palm or palm one\[hotsync username]\ and rename your backup
    folder to backup.old
    Vista
    Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
    folder to backup.old
    Then hotsync to your current hotsync name and all your contacts, calendar,
    tasks, and memos will come back over.
    Show file extensions for XP or Vista
    XP
    If you can not view file extensions on your PC I would like you to open a
    folder go to Tools-->Folder Options--> View (tab) and under show hidden
    files and folders uncheck hide file extensions for known file types.
    Vista
    Open control Panel go to Folder Options--> View (tab) and under show hidden
    files and folders uncheck hide file extensions for known file types.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/tungsten/tx/un​locked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Maybe you are looking for

  • EMac 700 fan CFM?

    I'm planning on replacing the case fan in my eMac 700. I've searched this forum and googled everywhere for information on how much air the stock fan pushes, what its CFM is. Does anyone know and if so, would you tell me, please? Many thanks.

  • Mouse Pointer on Table

    Dear All, I am displaying some values on the table. but, when i run my VI, the mouse pointer becomes different when i move it on table. it becomes some sort of editable one. How can i show the standard mouse pointer to move on the table ? Thanks, Rit

  • Mac OS X system freeze and crash

    I have a MacBook (est. 3 years old) with Mac OS X 10.6.8 installed.  Last night, my computer froze (the mouse wasn't functional, I couldn't use short keys, there was no spinning wheel, it was totally unresponsive).  I did a manual reboot by holding d

  • How do I keep my existing number when signing up with Fios phone??

    I do not currently have a Verizon land line. I'm considering signing up for 3play bundle but it doesn't appear to let me keep my existing phone number. Does anyone have ideas on how I can do this? Anyone know if verizon offer a means to do this? Othe

  • No AM/PM in Bridge... so Time is kinda useless

    Is there any way to get the AM/PM to show up in the Bridge UI for create/mod times? The precise times exist, because I can see them in Explorer, but Bridge just shows the numbers in 12 hour fomat and no other distinction... which mise well show no ti