Rebooting problems with 3COM 905C-TX

Hi there,
i am having a strange problem with my solaris/intel box after i
configured the 3com 905C-TX NIC card. I installed the patch for 905C
and i could finally see the device in the list at the time of booting.
then on, i added the I.P address to /etc/(hostname).elxl0 file, added
the host to /etc/inet/hosts, netmasks to /etc/inet/netmasks and ran
drvconfig, devlinks, touch /reconfigure and brought the machine up again.
Since then, the machine brings up the root logon screen and after i enter
the password, i don't see any taskbar at the bottom and i can't right-click
on the desktop..somehow, i could open the terminal and saw a core file
generated. i am postive this is something to do with the NIC because i tried undoing all the stuff with the files mentioned before and the system
was able to boot. Also, my /dev directory has elx, elxl and elxl0 files.I am wondering if anyone has encountered this problem
before..Any suggestions would be greatly appreciated..can somebody tell me
the exact steps to configure/add the TCP/IP details to the network cards..
thanks!!!

Yes, I can confirm the existance of this bug. I've not yet found
a solution for this problem. You probably have to get a different
NIC.
Someone should file a bug report for this panic. Here's a copy of the
messages printed on the console:
<pre>
# sync
# ifconfig elxl0 172.20.44.44 up
panic[cpu0]/thread=ef868e40: BAD TRAP: type=e (Page Fault) rp=ef868bbc addr=1 oc
curred in module "elxl" due to a NULL pointer dereference
sched: Page Fault
Bad kernel fault at addr=0x1
pid=0, pc=0xfea4aa20, sp=0x3, eflags=0x10246
eip(fea4aa20), eflags(10246), ebp(ef868c48), uesp(3), esp(ef868bec)
eax(2b88610), ebx(0), ecx(e0fd7000), edx(ef868e40), esi(1), edi(e0fd7ed8)
cr0(8005003b), cr2(1), cr3(613000)
cs(158) ds(160) ss(f000) es(160) fs(1a8) gs(1b0)
ef868af0 unix:die+87 (e, ef868bbc, 1, 0, e0fd7ed8, 1, 160)
ef868ba8 unix:trap+405 ()
ef868bbc unix:_cmntrap+94 (fe890160, ef860160, e0fd7ed8)
ef868c48 elxl:elxl_send+684 ()
ef868cd4 gld:gld_start+1e8 (e10bce54, e0d8e960)
ef868d44 gld:gld_unitdata+23b (e10bce54, e0d8e820, e0d8e820)
ef868da8 gld:gld_cmds+e2 ()
ef868df0 gld:gld_wsrv+223 ()
ef868e08 genunix:runservice+3a (e10bce54)
ef868e30 genunix:background+93 ()
panic: entering debugger (continue to save dump)
stopped at int20+0xb: ret
</pre>

Similar Messages

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

Constant reboot problem with 8530

My 8530 has gone into a perpetual reboot mode. Tried battery pulls, tried to get the OS reloaded, and a variety of pull the battery/run loader scenarios. Nothing seems to take. I can interrupt the reboot cycle with battery removed, and the OS appears to be loading, however as soon as the battery is replaced, it goes back into redlight/hourglass/flash of the boot screen/off/redlight. etc....
Any thoughts on how to solve this are most welcome.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

Reboot problems with iMac dual intel 1.83 OS 10.4.6

Needing help. Mac user since 1999 but I'm feeling like a novice with this. Wife was playing Sims 2 when it locked up and wouldn't allow the game to be turned off. Did a forced restart, disk went to the grey screen with the spinning gear for an extended period. Went to bed and the next morning the blue screen was on with OS X label as if computer was booting successfully but the hard drive sounded as if it was stuck in a loop. Got the installation disc and figured out how to eject the game and install the disc. Did safe boot and computer will goto the grey screen with the spinning gear and then will turn itself off.
Tried to reinstall OS X 10.4.4 while archiving in a separate folder and after verifying the disc the install fails. Ran hardware check came back o.k. Tried to boot from install disc and it just takes me back to the install disc start-up. Ran disc utility to repair premissions and it hung up after 30 minutes and the hard drive sounded like it was stuck in a loop. Ran disc utility to repair hard drive, first checks came back o.k. and then stated it was not completed due to an underlying issue when it tried to back out.
The hard drive is partitioned from boot camp, deleted windoze and tried to install OS X on the 20 gigs partitioned. The disc again verified but then failed- which threw me for a loop (does not appear dirty or scratched). My intention was to boot up on the partition and then try to retrieve pictures and videos on the hard disc, unfortunately only 1/2 is currently backed up.
I have not tried fsck yet because I was confused how to get to it, I think I am supposed to use the start up disc and go to the terminal application then enter the command, is this correct?
Unfortunately I am having to type this at work while the computer is at home- so if there are suggestions please dump them on me and I will try all of them tonight. No broken folders, kernal panics or exclamation points thus far.
Thanks for all the help.

Welcome to Apple Discussions!
When you verified with disk utility the disk, you basically ran fsck. Permissions are another factor here, but the fact it failed the disk check suggest major directory problems with the hard disk. Unfortunately the only third party directory repair utilities that I know work well currently are for PowerPC Macs only. If you have another Mac, suggest putting the iMac in target disk mode and see if it is seen by the other Mac. The target disk mode is described by this article:
http://docs.info.apple.com/article.html?artnum=58583
If it is, then you can recover your data.
If it is not, my suggestion is to get an external Firewire hard drive, and Prosoft Data Rescue and see if it is able to recover the information to it.
http://www.macsales.com/ sells equivalent Firewire hard drives for good prices, and http://www.prosofteng.com/ is where to get Data Rescue.
In addition, there may be suggestions people in the Boot Camp forum can offer:
http://discussions.apple.com/forum.jspa?forumID=1165
My suggestion is to find a way to completely and safely remove Boot Camp and only use it on non-production machines.
I don't think your problem is an online networking issue, which I see you posted in that forum.

Lockup/reboot problem with N95 v20.0.015

Hi
I installed v20.0.015 on a N95 and now the phone regularly locks up completely or restarts for no reason. It's made the phone pretty useless. Has anyone else had this problem?

I had the very same problem and I have fixed it!
The problem isn't the phone at all, but a corrupt download of the firmware! NSU will only download firmware if it hasn't already, which is why reflashing your phone doesn't solve the problem! So to fix the problem you have to delete the corrupt files and run NSU again!
Trouble is, the files are hidden away as system files so you have to unhide them first!
Here's how to do it all...
Click "Start", "My Computer", "Tools" then "Folder Options"
A Folder Options Window will open.
Click on the "View" Tab, Then under "Advanced settings"
Check the "Show hidden files and folders" radio and
uncheck "Hide protected operating system file (Recommended)" box.
A warning will appear when you uncheck it, don't worry, the files you will be deleting are not system files, but have been marked as such by NSU, so click on "Yes" and then "OK"
Now navigate to the following location on your Windows hard drive (Usually C: on most PCs)
Documents and Settings
All Users
Application Data
Nokia
Nokia Service Layer
A
nsl_service_module_00001
www.dsut.online.nokia.com.oti.caresuite
Products
rm-159
OR copy and paste the following without the quotes into the address bar and press enter!
"C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A\nsl_service_module_00001\www.dsut.online.nokia.com.oti.caresuite\Products\rm-159"
Now select all the files shown and delete them!
That's that, now to re-hide the system files,
click "Tools" "Folder Options", Click on "View" tab.
Check the "Do not show hidden files and folders" radio and
check "Hide protected operating system file (Recommended)" box. Click OK!
Now run NSU just as you did before! New firmware will download!
I hope this solves your problem!Message Edited by pjaysnowden on 03-Dec-200712:46 AM
Message Edited by pjaysnowden on 03-Dec-200712:46 AM
Message Edited by pjaysnowden on 03-Dec-200712:50 AM

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

Hello.
I have a problem with OEL 6.5 and ocfs2.
When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
fstab:
UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
#UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
#UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

What is the output of:
# chkconfig --list o2cb
# chkconfig --list ocfs2
# cat /etc/ocfs2/cluster.conf

MDT 2013 Windows 8.1 application install with reboot problem

Hello!
I have a problem with an application install on Windows 8.1. I'm trying to install two applications and have activated "Reboot the computer after installting this application" for the first application. After rebooting the deployment window does
not show up agagin. BDD.log shows, that the deployment starts after the reboot but seems to hang, before the UI shows.
I tried to install this two applications under Windows 7, which works without any problems.
Here is the BDD.log for the failed deployment: http://pastebin.com/PbUH1LUq
Can anyone confirm this problem with MDT 2013 and Windows 8.1? Any ideas how to fix this?
Additional information: Further testing showed, that this problem just occurs, if the application install gets started separately after deploying the OS. If the applications are installed in one deployment together with the OS, everything works fine.

I did the same install on Windows 7, which worked without any problems. Here is the log file: http://pastebin.com/Qgn2PzyC
To make it clear:
If I run a Lite Touch Install task sequence to install Windows 8.1 and install the two applications within this LTI, everything works fine. The computer reboots after installing the first application and the deployment goes on and finishes successfully after
the reboot.
If I first install Windows 7 or Windows 8.1 via LTI and then (after LTI successfully finished) start a separate application install (using a custom task sequence with only one "Install Application" task in it), everything works fine with Windows
7 (installation continues and finishes after the reboot) but fails with Windows 8.1.
In Windows 8.1 the computer reboots after installing the first application, but after rebooting, the installation does not start again.
Keith, as you said, my environment is corrupted, I created an new fresh deployment share, just added the two test applications and the custom task sequence and tried again. Same result, Windows 7 works fine, Windows 8.1 fails by not starting the installation
after the reboot.

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........

This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

Problem with my Bluetooth resulting in auto rebooting.

I am having a problem with my bluetooth ever since I bought XPERIA mini st15i. The first time it occured, I took it to the customer care, they solved the problem. The problem did occur again after 2 weeks. So, I again took it to Service. They resolved it again. This problem has occured about 8 times. Ever since I tranfer some files through bluetooth from gallery or file explorer, the phone restatrs again and again. It shows the Xperia logo and then agin, it auto reboots until the battery dies off. I updated the phone yesterday and the problem is occuring today again. My warranty period is over, so what can I do? In the warranty period, they changed my hardware but still the problem persists.
I think it's some kind of bluetooth bug. Can it be fixed?

download Sony Update Service and try this app http://www.sonymobile.com/ru/tools/update-service/ . Its helped me

Problem with machine rebooting. Essbase 11.1.1 installation.

Hi all,
I have a problem with my Essbase 11.1.1 installation. In a nutshell when I reboot the machine I can't log in EAS anymore. The only way I found out is just reconfigur EPM system after rebooting but It's just a work around.
Thanks for helping

Hi user,
AsI read between lines, it seems that you previously were able to access EAS so your installlation is not the problem but you accessing to EAS isthe problem. As you mentioned you are having problems accessing it after rebooting the server, I think it could be a prolem with the services. Please try stopping all the services in this order:
administration servicese
Essbase services 11.1.1.1_Hypservice_1
Foundation
Openldap
and then restart them from bottom to top. Let me know.
J.

I am having so many problems with my ipads and my computers since I upgraded to Yosemite on my desktop! I have never been so frustrated with Apple. My apple at work also has a virus problem and my other MAC keeps rebooting!! My MAC at home burned

Problems with Yosemite: virus (malware), rebooting, burned hard drive, ipads keep losing wifi.

You're going to have to be more specific about the symptoms you're seeing. At the moment, I really have almost no idea at all what's going on. Also, be aware that upgrading your Mac to Yosemite has no effect whatsoever on your iPads.
If you're having a lot of ad problems or redirects in the web browsers on all these devices, you probably have some kind of network compromise, such as hacked network hardware:
http://www.adwaremedic.com/kb/hackedrouter.php
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Having problem with hp computer freezing up and rebooting? have already updated video drivers

I having problem with HP Slimline Desktop with AMD Vision, freezing up and rebooting, and will sometimes show horiztonal lines across the screen, making screen unreadable. Have had problem for a few weeks, I have already checked with HP tools hard drive and video display both check out, and have I restored the system back to its orginal version by using partion drive and, none seems to help get rid of the freezing and rebooting of PC. Any thought what need to look at?

Can you locate a product number on the system that is freezing??
I am an HP employee, but my views are my own and are not endorsed by HP.

I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!

I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!

Try resetting the SMC and the PRAM.
1. SMC
Read this and follow the instructions for your kind of mac:
http://support.apple.com/kb/HT3964
2. PRAM
Follow the procedure below:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
command–option–P–R
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should normally.

Rebooting problems with 3COM 905C-TX

Similar Messages

Maybe you are looking for