Reboots when windows xp safeboot screen comes!

Reboots when windows xp safeboot screen comes!
I just configured my computer with the new parts.
But it stops and reboots at the windows error safeboot thing.
Please help me
thx

dont think its a bad cd cause ive heard about others having the exact same problem

Similar Messages

  • TS1367 when the white start screen comes on with the apple and spinning wheel but underneath it there is a bar. Once the bar fills up my MacBook goes off what is that? What do I do?

    start screen comes on with the apple and spinning wheel but underneath it there is a bar. Once the bar fills up my MacBook goes off what is that? What do I do?

    Have you tried a safe start by holding the shift key when you boot? If that works, and it can take a while to complete, see if a regular boot now works. If it does, you need to free up space on your hard drive.
    If a safe boot doesn't work, you need to either boot from an OS X DVD or go into target disk mode to connect via firewire cable to another mac to free up space on your hard drive. You need 5GB min, with 10% to 15%, or more, better, for systems usage.  If you have a backup, move some data files to it, erase them and empty the trash.

  • I can't open my email, when I try home screen comes up

    I can't open my email. When I try the home screen comes up.

    close out of the mail app, double tap the home button and completely close out of it.
    then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • When I reboot in Windows 7 partition, it comes up with an error.

    Hello all,
    I have recentry formatted my Primary Partition for windows 7, and when i reboot to the HHD, it comes up with an error; "Windows failed to start. a recent hardware or software change might be the cause".
    Under i get some options;
    1, insert the installation cd
    2, choose language settings
    3, click repair
    Under that i get this;
    File: \Boot\BCD.
    Status: 0xc000000f.
    Info: An error occured while attempting to read the boot configuaration data.
    I have previously performed numerous steps such as moving and copying the BCD store to another partition and i also tried bootrec.exe in command prompt, when i select repair system, but nothing worked. I have also tried rebooting with the windows 7 installation cd and i also tried to perform a clean install, but it stops with an error after i reach 24% at the expanding files bit of the installation, therefore it fails and restarts again, this too, hasn't worked.
    Now i am stuck with the operating system that cannot start, and the BCD store that cannot be moved/reset somewhere else.
    Please, can someone help me with this error? Thank you very much.

    ERRORS WIN: iPhone iPad Ipod Touch Connection Error
    OxE   =   http://support.apple.com/kb/TS3221

  • Premier Elements 11 screen refresh when window not full screen

    Hi,
    Have following spec pc:
    Pentium 4 3.6Ghz 2Gb Ram with NVidia GTS450 latest display drivers and windows XP service pack 3.
    When running Premier elements in not full screen mode moving the window leaves window trails behind and screen does not refresh. In full screen things are ok?.
    What can be causing this and is there anything that can be done to resolve this apart from upgrading my pc etc.
    Thanks.

    Welcome to the forum.
    I have the same, or very similar GUI display issues with PrE 11 on an older laptop, running XP-Pro SP3 and an nVidia GeForce 8800M GTX w/ 512MB VRAM. Unfortunately, for that chip and on XP-Pro, the latest video driver is from back in 2011 (IIRC), and no new one in sight.
    I feel that the only solution will be to update the OS to Win7 (allowing a newer video driver from nVidia), or replacement of the laptop (which I am doing).
    PrE 4.0, PrPro CS 2, AE CS 2, and other, older Adobe programs, all work perfectly, but PrE 11 has display issues. To me, this means that the newer version's GUI interfaces more closely with the video driver, than the other programs.
    Even for a company, like nVidia, the XP OS route is now a deadend.
    Sorry for the bad news, but know that you are not alone.
    Good luck,
    Hunt

  • When the "choose file" screen comes up, it's blank. No files appear to choose. Why?

    Please help! I have to drag files where i need them wich doesn't work all the time. Gettin ******.

    I know what you're speaking of... you may get by simply rebuilding permissions or you may have to install the OS anew. Since you're running 10.6.8, that would mean finding your update disc and doing a complete system restore. Before you take that drastic step, boot with the SL install disc and use Disk Utility to verify and repair permissions - that might straighten the problem out - if not, then it's tiem for a freesh OS install (which should not damage your data in any way).
    Good luck,
    Clinton

  • Can't get windows live id screen to go away

    wjen I try to open forefox from my deaktop a windows live ID screen come up that says MUST ALLOW COOKIES. I can't find the firefox dropdown tab in the left corner

    Have you tried force closing mail?
    To force close:
    Double tap home button to have the running apps appear
    Hold an icon down for a few seconds until the red minus sign appears
    Select red minus to force close disired app

  • I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

    I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
    I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us  reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

    You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • Non-system disk Error when rebooting from Windows Disk

    Hello,
    I'm trying to run Windows 7 Pro on a partition on my Macbook pro retina display. I have reached the step where through bootcamp you reboot from the wondows disk. I have the windows disk in an external optical drive and have tried both 32 and 64 bit installation disks and still getting the same error"
    "Non-system disk
    Press and key to reboot"
    When I hit any key nothing happends, have to turn off computer by holding power button.
    I have also tried turning the computer on and holding cammad R, and selecting the boot disk manually, same error occurs.
    Any suggestions?

    Reboot your Mac while holding down the Alt/Option-key until the Boot Selection screen comes up.
    Choose to boot into oSX.
    Once in OSX go to System Preferences then Startup Volume and reset OSX to be the default.
    Btw.: there are no OSX Lion discs unless you made one yourself.
    Lion has Recovery instead OS X Lion: About Lion Recovery
    Stefan

  • Black screen on reboot from windows to mac?

    Hello,
    A black screen is stalking me... I'd be much obliged if anyone can help.
    The problem:
    I have Windows 7 installed with Bootcamp. Every time I shut down / restart from  Windows  to get to the Mac side, the chime rings, but the screen stays black. I can tell the Mac is running though, because of the sound I hear when I press the volume up/down keys on the keyboard. Then, at some point (5 - 30 - 60 mins later) the computer decides out of nowhere it's time to unveil the desktop... This never happens when I reboot from the Mac side (unless I force shutdown while the black screen is still there).
    Things I tried that didn't work:
    - Command-Option-P-R to reset NVRAM (worked once but didn't fix it, and now when I try the screen stays black)
    - Resetting SMC
    - Apple Diagnostics came back with no issues found (when I restarted after the diagnostics, I got hit with the black screen again...)
    - Erasing the Windows partition and reinstalling it.
    Things I should probably mention:
    The mac is a late 2013 iMac, Intel Core i5 with NVIDIA GeForce GT 750M, running OSX 10.9.1
    I apologize if this has an obvious solution I somehow missed, or if it was answered in another post.
    Thanks for your time.

    One way is to wipe the iPod clean and use it as a hard drive to carry the files over to the new comptuer. You must format the iPod in what's called Fat32, the older formatting for DOS. If you do this on a Mac, you use the Disk Utility to Erase the disk, and you choose MS-DOS for the format.
    Then you plug in the iPod to the Mac, drag the iTunes Music folder to the iPod disk. Then you plug it into the Windows machine and drag the files to your iTunes folder there. See some instructions here:
    http://docs.info.apple.com/article.html?artnum=300173
    On the other hand, you might try using a 3rd party program that takes songs off the iPod. But Windows doesn't read the Mac files, I bet they won't help you move the music cross-platform.
    Hope this helps...

  • Screen flickering when window is open on Cinnamon

    Hi,
    I have a fresh Arch install with Cinnamon DE(version 2.4.0).
    When I loggs in(always) or open some window(often) my screen flicker(what is shown in this video: http://www.dailymotion.com/video/x29jkt … 60313_tech ).
    I'm using open source xf86-video-ati.
    here is my xorg.0.log:
    [ 11.668]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 11.668] X Protocol Version 11, Revision 0
    [ 11.668] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 11.668] Current Operating System: Linux laptop 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
    [ 11.668] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=30917681-ef12-4d27-acd8-8c77e49c2b82 rw resume=UUID=10b6406e-4367-406a-8c95-073ad7689f5b verbose
    [ 11.668] Build Date: 21 September 2014 10:53:13AM
    [ 11.668]
    [ 11.668] Current version of pixman: 0.32.6
    [ 11.668] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 11.668] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 11.669] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 7 16:03:17 2014
    [ 11.703] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 11.703] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 11.770] (==) No Layout section. Using the first Screen section.
    [ 11.770] (==) No screen section available. Using defaults.
    [ 11.770] (**) |-->Screen "Default Screen Section" (0)
    [ 11.770] (**) | |-->Monitor "<default monitor>"
    [ 11.771] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 11.771] (**) | |-->Device "Radeon"
    [ 11.771] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 11.771] (==) Automatically adding devices
    [ 11.771] (==) Automatically enabling devices
    [ 11.771] (==) Automatically adding GPU devices
    [ 11.839] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 11.839] Entry deleted from font path.
    [ 11.839] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 11.839] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 11.839] Entry deleted from font path.
    [ 11.839] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 11.839] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 11.839] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 11.839] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 11.840] (II) Loader magic: 0x818d80
    [ 11.840] (II) Module ABI versions:
    [ 11.840] X.Org ANSI C Emulation: 0.4
    [ 11.840] X.Org Video Driver: 18.0
    [ 11.840] X.Org XInput driver : 21.0
    [ 11.840] X.Org Server Extension : 8.0
    [ 11.841] (EE) systemd-logind: failed to get session: PID 308 does not belong to any known session
    [ 11.842] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 11.846] (--) PCI:*(0:2:0:0) 1002:68e0:1028:0413 rev 0, Mem @ 0xd0000000/268435456, 0xcfee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 11.846] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 11.846] (II) LoadModule: "glx"
    [ 11.872] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 11.935] (II) Module glx: vendor="X.Org Foundation"
    [ 11.935] compiled for 1.16.1, module version = 1.0.0
    [ 11.935] ABI class: X.Org Server Extension, version 8.0
    [ 11.935] (==) AIGLX enabled
    [ 11.935] (II) LoadModule: "radeon"
    [ 11.935] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 11.963] (II) Module radeon: vendor="X.Org Foundation"
    [ 11.963] compiled for 1.16.1, module version = 7.5.0
    [ 11.963] Module class: X.Org Video Driver
    [ 11.963] ABI class: X.Org Video Driver, version 18.0
    [ 11.963] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 11.967] (++) using VT number 1
    [ 11.977] (II) [KMS] Kernel modesetting enabled.
    [ 11.977] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 11.977] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 11.977] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 11.977] (==) RADEON(0): Default visual is TrueColor
    [ 11.977] (**) RADEON(0): Option "SWcursor" "off"
    [ 11.977] (**) RADEON(0): Option "EnablePageFlip" "on"
    [ 11.977] (**) RADEON(0): Option "ColorTiling" "on"
    [ 11.977] (**) RADEON(0): Option "RenderAccel" "on"
    [ 11.977] (**) RADEON(0): Option "AccelMethod" "EXA"
    [ 11.977] (**) RADEON(0): Option "EXAVSync" "off"
    [ 11.977] (**) RADEON(0): Option "EXAPixmaps" "on"
    [ 11.977] (==) RADEON(0): RGB weight 888
    [ 11.977] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 11.977] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)
    [ 11.977] (II) Loading sub module "dri2"
    [ 11.977] (II) LoadModule: "dri2"
    [ 11.977] (II) Module "dri2" already built-in
    [ 11.977] (II) Loading sub module "exa"
    [ 11.977] (II) LoadModule: "exa"
    [ 11.992] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 12.000] (II) Module exa: vendor="X.Org Foundation"
    [ 12.000] compiled for 1.16.1, module version = 2.6.0
    [ 12.000] ABI class: X.Org Video Driver, version 18.0
    [ 12.000] (II) RADEON(0): KMS Color Tiling: enabled
    [ 12.000] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 12.000] (II) RADEON(0): KMS Pageflipping: enabled
    [ 12.000] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 12.000] (II) RADEON(0): Output LVDS has no monitor section
    [ 12.003] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 12.023] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 12.024] (II) RADEON(0): EDID for output LVDS
    [ 12.024] (II) RADEON(0): Manufacturer: SEC Model: 5441 Serial#: 0
    [ 12.024] (II) RADEON(0): Year: 2009 Week: 0
    [ 12.024] (II) RADEON(0): EDID Version: 1.3
    [ 12.024] (II) RADEON(0): Digital Display Input
    [ 12.024] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 12.024] (II) RADEON(0): Gamma: 2.20
    [ 12.024] (II) RADEON(0): No DPMS capabilities specified
    [ 12.024] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 12.024] (II) RADEON(0): First detailed timing is preferred mode
    [ 12.024] (II) RADEON(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
    [ 12.024] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 12.024] (II) RADEON(0): Manufacturer's mask: 0
    [ 12.024] (II) RADEON(0): Supported detailed timing:
    [ 12.024] (II) RADEON(0): clock: 71.6 MHz Image Size: 344 x 194 mm
    [ 12.024] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1510 h_border: 0
    [ 12.024] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 789 v_border: 0
    [ 12.024] (II) RADEON(0): Supported detailed timing:
    [ 12.024] (II) RADEON(0): clock: 71.6 MHz Image Size: 344 x 194 mm
    [ 12.024] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1510 h_border: 0
    [ 12.024] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 789 v_border: 0
    [ 12.024] (II) RADEON(0): NPFT8\81156AT
    [ 12.024] (II) RADEON(0): Unknown vendor-specific block 0
    [ 12.024] (II) RADEON(0): EDID (in hex):
    [ 12.024] (II) RADEON(0): 00ffffffffffff004ca3415400000000
    [ 12.024] (II) RADEON(0): 00130103902213780ac8959e57549226
    [ 12.024] (II) RADEON(0): 0f505400000001010101010101010101
    [ 12.024] (II) RADEON(0): 010101010101f41b5690500015303020
    [ 12.024] (II) RADEON(0): 250058c21000001af41b569050001530
    [ 12.024] (II) RADEON(0): 3020250058c21000001a000000fe004e
    [ 12.024] (II) RADEON(0): 504654388131353641540a2000000000
    [ 12.024] (II) RADEON(0): 00000000000000000001010a202000e7
    [ 12.024] (II) RADEON(0): Printing probed modes for output LVDS
    [ 12.024] (II) RADEON(0): Modeline "1366x768"x60.1 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 12.024] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
    [ 12.024] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 12.024] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 12.024] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 12.024] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
    [ 12.024] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
    [ 12.024] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 12.027] (II) RADEON(0): EDID for output HDMI-0
    [ 12.047] (II) RADEON(0): EDID for output VGA-0
    [ 12.047] (II) RADEON(0): Output LVDS connected
    [ 12.047] (II) RADEON(0): Output HDMI-0 disconnected
    [ 12.047] (II) RADEON(0): Output VGA-0 disconnected
    [ 12.047] (II) RADEON(0): Using exact sizes for initial modes
    [ 12.047] (II) RADEON(0): Output LVDS using initial mode 1366x768
    [ 12.047] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 12.047] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:3f782000
    [ 12.047] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 12.047] (==) RADEON(0): DPI set to (96, 96)
    [ 12.047] (II) Loading sub module "fb"
    [ 12.047] (II) LoadModule: "fb"
    [ 12.047] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 12.057] (II) Module fb: vendor="X.Org Foundation"
    [ 12.057] compiled for 1.16.1, module version = 1.0.0
    [ 12.057] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12.057] (II) Loading sub module "ramdac"
    [ 12.057] (II) LoadModule: "ramdac"
    [ 12.057] (II) Module "ramdac" already built-in
    [ 12.057] (--) Depth 24 pixmap format is 32 bpp
    [ 12.057] (II) RADEON(0): [DRI2] Setup complete
    [ 12.057] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 12.057] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 12.058] (II) RADEON(0): Front buffer size: 4128K
    [ 12.058] (II) RADEON(0): VRAM usage limit set to 932119K
    [ 12.071] (==) RADEON(0): Backing store enabled
    [ 12.071] (II) RADEON(0): Direct rendering enabled
    [ 12.072] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 12.072] (II) EXA(0): Driver registered support for the following operations:
    [ 12.072] (II) Solid
    [ 12.072] (II) Copy
    [ 12.072] (II) Composite (RENDER acceleration)
    [ 12.072] (II) UploadToScreen
    [ 12.072] (II) DownloadFromScreen
    [ 12.072] (II) RADEON(0): Acceleration enabled
    [ 12.072] (==) RADEON(0): DPMS enabled
    [ 12.072] (==) RADEON(0): Silken mouse enabled
    [ 12.072] (II) RADEON(0): Set up textured video
    [ 12.072] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 12.072] (II) RADEON(0): [XvMC] Extension initialized.
    [ 12.072] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 12.073] (WW) RADEON(0): Option "AccelDFS" is not used
    [ 12.073] (--) RandR disabled
    [ 12.673] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 12.673] (II) AIGLX: enabled GLX_ARB_create_context
    [ 12.673] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 12.673] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 12.673] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 12.673] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 12.673] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 12.673] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 12.673] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 12.674] (II) AIGLX: Loaded and initialized r600
    [ 12.674] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 12.675] (II) RADEON(0): Setting screen physical size to 361 x 203
    [ 12.980] (II) config/udev: Adding input device Power Button (/dev/input/event8)
    [ 12.980] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 12.980] (**) Power Button: Applying InputClass "system-keyboard"
    [ 12.980] (II) LoadModule: "evdev"
    [ 12.981] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 13.002] (II) Module evdev: vendor="X.Org Foundation"
    [ 13.002] compiled for 1.16.0, module version = 2.9.0
    [ 13.002] Module class: X.Org XInput Driver
    [ 13.002] ABI class: X.Org XInput driver, version 21.0
    [ 13.002] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.002] (**) Power Button: always reports core events
    [ 13.002] (**) evdev: Power Button: Device: "/dev/input/event8"
    [ 13.002] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.002] (--) evdev: Power Button: Found keys
    [ 13.002] (II) evdev: Power Button: Configuring as keyboard
    [ 13.002] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event8"
    [ 13.002] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 13.002] (**) Option "xkb_rules" "evdev"
    [ 13.002] (**) Option "xkb_model" "pc104"
    [ 13.002] (**) Option "xkb_layout" "pl"
    [ 13.057] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    [ 13.057] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 13.057] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 13.057] (II) Using input driver 'evdev' for 'Video Bus'
    [ 13.057] (**) Video Bus: always reports core events
    [ 13.057] (**) evdev: Video Bus: Device: "/dev/input/event9"
    [ 13.057] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 13.057] (--) evdev: Video Bus: Found keys
    [ 13.057] (II) evdev: Video Bus: Configuring as keyboard
    [ 13.057] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input10/event9"
    [ 13.057] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 13.057] (**) Option "xkb_rules" "evdev"
    [ 13.057] (**) Option "xkb_model" "pc104"
    [ 13.057] (**) Option "xkb_layout" "pl"
    [ 13.058] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 13.058] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.058] (**) Power Button: Applying InputClass "system-keyboard"
    [ 13.058] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.058] (**) Power Button: always reports core events
    [ 13.058] (**) evdev: Power Button: Device: "/dev/input/event5"
    [ 13.058] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.058] (--) evdev: Power Button: Found keys
    [ 13.058] (II) evdev: Power Button: Configuring as keyboard
    [ 13.058] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"
    [ 13.058] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 13.058] (**) Option "xkb_rules" "evdev"
    [ 13.058] (**) Option "xkb_model" "pc104"
    [ 13.058] (**) Option "xkb_layout" "pl"
    [ 13.059] (II) config/udev: Adding input device Lid Switch (/dev/input/event7)
    [ 13.059] (II) No input driver specified, ignoring this device.
    [ 13.059] (II) This device may have been added with another device file.
    [ 13.059] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
    [ 13.059] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 13.059] (**) Sleep Button: Applying InputClass "system-keyboard"
    [ 13.059] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 13.059] (**) Sleep Button: always reports core events
    [ 13.059] (**) evdev: Sleep Button: Device: "/dev/input/event6"
    [ 13.059] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 13.059] (--) evdev: Sleep Button: Found keys
    [ 13.059] (II) evdev: Sleep Button: Configuring as keyboard
    [ 13.059] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event6"
    [ 13.059] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 13.059] (**) Option "xkb_rules" "evdev"
    [ 13.059] (**) Option "xkb_model" "pc104"
    [ 13.059] (**) Option "xkb_layout" "pl"
    [ 13.061] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event10)
    [ 13.061] (II) No input driver specified, ignoring this device.
    [ 13.061] (II) This device may have been added with another device file.
    [ 13.061] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event3)
    [ 13.061] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
    [ 13.061] (**) HID 413c:8161: Applying InputClass "system-keyboard"
    [ 13.061] (II) Using input driver 'evdev' for 'HID 413c:8161'
    [ 13.061] (**) HID 413c:8161: always reports core events
    [ 13.061] (**) evdev: HID 413c:8161: Device: "/dev/input/event3"
    [ 13.061] (--) evdev: HID 413c:8161: Vendor 0x413c Product 0x8161
    [ 13.061] (--) evdev: HID 413c:8161: Found keys
    [ 13.061] (II) evdev: HID 413c:8161: Configuring as keyboard
    [ 13.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:413C:8161.0006/input/input4/event3"
    [ 13.061] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 10)
    [ 13.061] (**) Option "xkb_rules" "evdev"
    [ 13.061] (**) Option "xkb_model" "pc104"
    [ 13.061] (**) Option "xkb_layout" "pl"
    [ 13.062] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/event4)
    [ 13.062] (**) HID 413c:8162: Applying InputClass "evdev pointer catchall"
    [ 13.062] (II) Using input driver 'evdev' for 'HID 413c:8162'
    [ 13.062] (**) HID 413c:8162: always reports core events
    [ 13.062] (**) evdev: HID 413c:8162: Device: "/dev/input/event4"
    [ 13.062] (--) evdev: HID 413c:8162: Vendor 0x413c Product 0x8162
    [ 13.062] (--) evdev: HID 413c:8162: Found 3 mouse buttons
    [ 13.062] (--) evdev: HID 413c:8162: Found relative axes
    [ 13.062] (--) evdev: HID 413c:8162: Found x and y relative axes
    [ 13.062] (II) evdev: HID 413c:8162: Configuring as mouse
    [ 13.063] (**) evdev: HID 413c:8162: YAxisMapping: buttons 4 and 5
    [ 13.063] (**) evdev: HID 413c:8162: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.063] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:413C:8162.0007/input/input5/event4"
    [ 13.063] (II) XINPUT: Adding extended input device "HID 413c:8162" (type: MOUSE, id 11)
    [ 13.063] (II) evdev: HID 413c:8162: initialized for relative axes.
    [ 13.063] (**) HID 413c:8162: (accel) keeping acceleration scheme 1
    [ 13.063] (**) HID 413c:8162: (accel) acceleration profile 0
    [ 13.063] (**) HID 413c:8162: (accel) acceleration factor: 2.000
    [ 13.063] (**) HID 413c:8162: (accel) acceleration threshold: 4
    [ 13.063] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/mouse1)
    [ 13.063] (II) No input driver specified, ignoring this device.
    [ 13.063] (II) This device may have been added with another device file.
    [ 13.063] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2M (/dev/input/event17)
    [ 13.063] (**) Laptop_Integrated_Webcam_2M: Applying InputClass "evdev keyboard catchall"
    [ 13.063] (**) Laptop_Integrated_Webcam_2M: Applying InputClass "system-keyboard"
    [ 13.063] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2M'
    [ 13.064] (**) Laptop_Integrated_Webcam_2M: always reports core events
    [ 13.064] (**) evdev: Laptop_Integrated_Webcam_2M: Device: "/dev/input/event17"
    [ 13.064] (--) evdev: Laptop_Integrated_Webcam_2M: Vendor 0xc45 Product 0x6417
    [ 13.064] (--) evdev: Laptop_Integrated_Webcam_2M: Found keys
    [ 13.064] (II) evdev: Laptop_Integrated_Webcam_2M: Configuring as keyboard
    [ 13.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input19/event17"
    [ 13.064] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2M" (type: KEYBOARD, id 12)
    [ 13.064] (**) Option "xkb_rules" "evdev"
    [ 13.064] (**) Option "xkb_model" "pc104"
    [ 13.064] (**) Option "xkb_layout" "pl"
    [ 13.064] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
    [ 13.064] (II) No input driver specified, ignoring this device.
    [ 13.064] (II) This device may have been added with another device file.
    [ 13.064] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event12)
    [ 13.064] (II) No input driver specified, ignoring this device.
    [ 13.064] (II) This device may have been added with another device file.
    [ 13.064] (II) config/udev: Adding input device HDA Intel MID Headphone Front (/dev/input/event13)
    [ 13.064] (II) No input driver specified, ignoring this device.
    [ 13.064] (II) This device may have been added with another device file.
    [ 13.065] (II) config/udev: Adding input device HDA Intel MID Headphone Surround (/dev/input/event14)
    [ 13.065] (II) No input driver specified, ignoring this device.
    [ 13.065] (II) This device may have been added with another device file.
    [ 13.065] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event1)
    [ 13.065] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
    [ 13.065] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
    [ 13.065] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
    [ 13.065] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event1"
    [ 13.065] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
    [ 13.065] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
    [ 13.065] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
    [ 13.065] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
    [ 13.065] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    [ 13.065] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
    [ 13.065] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
    [ 13.065] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
    [ 13.065] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.065] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input2/event1"
    [ 13.065] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 13)
    [ 13.065] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
    [ 13.065] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
    [ 13.065] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
    [ 13.065] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
    [ 13.065] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
    [ 13.066] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
    [ 13.066] (II) No input driver specified, ignoring this device.
    [ 13.066] (II) This device may have been added with another device file.
    [ 13.066] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:200a (/dev/input/event2)
    [ 13.066] (**) Logitech Unifying Device. Wireless PID:200a: Applying InputClass "evdev keyboard catchall"
    [ 13.066] (**) Logitech Unifying Device. Wireless PID:200a: Applying InputClass "system-keyboard"
    [ 13.066] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:200a'
    [ 13.066] (**) Logitech Unifying Device. Wireless PID:200a: always reports core events
    [ 13.066] (**) evdev: Logitech Unifying Device. Wireless PID:200a: Device: "/dev/input/event2"
    [ 13.066] (--) evdev: Logitech Unifying Device. Wireless PID:200a: Vendor 0x46d Product 0xc52b
    [ 13.066] (--) evdev: Logitech Unifying Device. Wireless PID:200a: Found 1 mouse buttons
    [ 13.066] (--) evdev: Logitech Unifying Device. Wireless PID:200a: Found scroll wheel(s)
    [ 13.066] (--) evdev: Logitech Unifying Device. Wireless PID:200a: Found relative axes
    [ 13.066] (II) evdev: Logitech Unifying Device. Wireless PID:200a: Forcing relative x/y axes to exist.
    [ 13.066] (--) evdev: Logitech Unifying Device. Wireless PID:200a: Found absolute axes
    [ 13.066] (II) evdev: Logitech Unifying Device. Wireless PID:200a: Forcing absolute x/y axes to exist.
    [ 13.066] (--) evdev: Logitech Unifying Device. Wireless PID:200a: Found keys
    [ 13.066] (II) evdev: Logitech Unifying Device. Wireless PID:200a: Configuring as mouse
    [ 13.066] (II) evdev: Logitech Unifying Device. Wireless PID:200a: Configuring as keyboard
    [ 13.066] (II) evdev: Logitech Unifying Device. Wireless PID:200a: Adding scrollwheel support
    [ 13.066] (**) evdev: Logitech Unifying Device. Wireless PID:200a: YAxisMapping: buttons 4 and 5
    [ 13.066] (**) evdev: Logitech Unifying Device. Wireless PID:200a: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 13.066] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input3/event2"
    [ 13.066] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:200a" (type: KEYBOARD, id 14)
    [ 13.066] (**) Option "xkb_rules" "evdev"
    [ 13.066] (**) Option "xkb_model" "pc104"
    [ 13.066] (**) Option "xkb_layout" "pl"
    [ 13.066] (II) evdev: Logitech Unifying Device. Wireless PID:200a: initialized for relative axes.
    [ 13.066] (WW) evdev: Logitech Unifying Device. Wireless PID:200a: ignoring absolute axes.
    [ 13.066] (**) Logitech Unifying Device. Wireless PID:200a: (accel) keeping acceleration scheme 1
    [ 13.066] (**) Logitech Unifying Device. Wireless PID:200a: (accel) acceleration profile 0
    [ 13.066] (**) Logitech Unifying Device. Wireless PID:200a: (accel) acceleration factor: 2.000
    [ 13.066] (**) Logitech Unifying Device. Wireless PID:200a: (accel) acceleration threshold: 4
    [ 13.067] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 13.067] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.067] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [ 13.067] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 13.067] (**) AT Translated Set 2 keyboard: always reports core events
    [ 13.067] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 13.067] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 13.067] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 13.067] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 13.067] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 13.067] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
    [ 13.067] (**) Option "xkb_rules" "evdev"
    [ 13.067] (**) Option "xkb_model" "pc104"
    [ 13.067] (**) Option "xkb_layout" "pl"
    [ 13.067] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event18)
    [ 13.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 13.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 13.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 13.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 13.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 13.067] (II) LoadModule: "synaptics"
    [ 13.067] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 13.079] (II) Module synaptics: vendor="X.Org Foundation"
    [ 13.079] compiled for 1.16.0, module version = 1.8.1
    [ 13.079] Module class: X.Org XInput Driver
    [ 13.079] ABI class: X.Org XInput driver, version 21.0
    [ 13.079] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 13.079] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 13.079] (**) Option "Device" "/dev/input/event18"
    [ 13.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 13.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5836 (res 60)
    [ 13.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4908 (res 104)
    [ 13.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 13.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 13.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 13.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 13.203] (**) Option "TapButton1" "1"
    [ 13.203] (**) Option "TapButton2" "2"
    [ 13.203] (**) Option "TapButton3" "3"
    [ 13.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 13.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 13.270] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event18"
    [ 13.270] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
    [ 13.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 13.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 13.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
    [ 13.270] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 13.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 13.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 13.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 13.270] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 13.271] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
    [ 13.271] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 13.271] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
    [ 13.271] (II) No input driver specified, ignoring this device.
    [ 13.271] (II) This device may have been added with another device file.
    [ 13.272] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event16)
    [ 13.272] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 13.272] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
    [ 13.272] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 13.272] (**) Dell WMI hotkeys: always reports core events
    [ 13.272] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event16"
    [ 13.272] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 13.272] (--) evdev: Dell WMI hotkeys: Found keys
    [ 13.272] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 13.272] (**) Option "config_info" "udev:/sys/devices/virtual/input/input18/event16"
    [ 13.272] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
    [ 13.272] (**) Option "xkb_rules" "evdev"
    [ 13.272] (**) Option "xkb_model" "pc104"
    [ 13.272] (**) Option "xkb_layout" "pl"
    [ 16.353] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 16.353] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 16.353] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 19.996] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 19.996] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 19.997] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 20.942] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 20.942] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 20.942] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 41.779] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 41.779] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 41.779] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 54.909] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/0003:0FCE:516D.0009/input/input21/event20"
    [ 54.912] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:0FCE:516D.0008/input/input20/event19"
    [ 54.912] (II) XINPUT: Adding extended input device "Sony Ericsson WT19i" (type: KEYBOARD, id 19)
    [ 54.912] (**) Option "xkb_rules" "evdev"
    [ 54.912] (**) Option "xkb_model" "pc104"
    [ 54.912] (**) Option "xkb_layout" "pl"
    [ 54.979] (II) config/udev: Adding input device Sony Ericsson WT19i (/dev/input/mouse3)
    [ 54.979] (II) No input driver specified, ignoring this device.
    [ 54.979] (II) This device may have been added with another device file.
    [ 89.613] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 89.613] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 89.613] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 92.318] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 92.318] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 92.318] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 92.351] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 92.351] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 92.351] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 178.889] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 178.889] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 178.889] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 179.972] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 179.973] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 179.973] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 179.995] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 179.995] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 179.995] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 365.994] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 365.994] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 365.994] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 402.487] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 402.487] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 402.487] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 402.516] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 402.516] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 402.516] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 441.745] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 441.745] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 441.745] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
    [ 441.815] (II) RADEON(0): EDID vendor "SEC", prod id 21569
    [ 441.815] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 441.815] (II) RADEON(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)

    What is the interface to the LCD?  If it is a digital link such as DVI or HDMI, I have no suggestion.
    If you are using VGA, it turns out there is no clock signal to actually clock the pixels to the screen.  The LCD has a controller that measures the time between horizontal sync pulses and recreates a clock using a phase locked loop.  Sometimes, the phase of that signal is such that the reconstructed clock edges occur too close to where the pixel data are changing.
    Most LCDs with a VGA interface allow you to change the phase using an on-screen menu.  A really good test pattern for setting the phase is a full screen "checkerboard" of black and white pixels.

  • When i take photos or videos on my ipod touch with the camera, then i plug it into the computer to sync, the computer shuts down and this blue screen comes up saying "an error has occured" and a heap of other stuff.

    When i take a photo or a video using the camera on my ipod touch, the computer (windows xp) shuts down and a blue screen comes up saying "an error has occured" and a heap of oth stuff in white. It doesn't wipe the memory or anything off the ipod. Whenever i sync my ipod without photos or videos it works fine. It also doesn't mind me taking photos off itunes to put on the ipod. I have had a look around and a couple of people say reinstall itunes, but i don't know if i will lose all my songs and apps. Any suggestions of help?

    Removing all Apple related software and reinstalling iTunes should bring all needed drivers back: Removing iTunes, QuickTime, and other software components for Windows XP
    Also check for new driver updates for Windows, especially if you have a webcam installed.
    iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
    copied from the article about reinstalling iTunes

  • When I click on safari button a blank safari screen comes up for one second then minimizes. can't use safari?

    When I click on the safari button  a blank screen comes up for about one second, then minimizes. I have checked wi-fi connection, and all is fine. Facebook and maps apps still work.

    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Why can i watch videos from safari online while in 3g area but when at home connected to wi-fi the video screen comes up with a play button with a line through it and doesnt let you watch video

    i can not watch videos while at home and connected to wi-fi. when i touch the video i want to watch a screen comes up with a play symbol with a line through it. i can disconnect from the wi-fi and go to 3g and the video will play. this is happening when i go to safari and try to watch a online video.

    here's the info you needed:
    windows xp professional
    mozilla 3.0.19
    explorer 8.0.6001.18702
    still having the same problem unfortunately.  i appreciate your help thus far and hope you have more info.  thanks a lot.

  • IPhone connects/charges on system boot up. When it gets to Windows 7 loading screen it disconnects.

    Hello to all who read,
    I've usually used my iPhone with my iMac so perhaps that's the issue in itself. But now I've done away with my iMac and trying to connect and update my phones music library through the latest Windows iTunes. My iPhone refuses to connect to my laptop no matter which USB port I use. I've observed however it does connect to my laptop when it boots up and when it hits the Windows loading screen then it disconnects.
    So I'm assuming there is something in the Windows set up that is making the iPhone disconnect when Windows loads. I've looked at multiple tutorials floating around but to no avail either.
    Any help would be greatly appreciated as I desperately need to update my iPhones music.
    Cheers.

    Hi,
    Shut down the notebook.  Tap away at f10 as you start the notebook to enter the bios menu.  Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory.  Post back with the details of any error messages.
    If both the above tests pass, try the following.
    If you don't already have one, use another PC to create a Windows 7 Rescue CD.  Download the relevant ISO from the links below.
    Windows 7 32bit
    Windows 7 64bit
    You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here.  Once created, or if you already have this, insert the CD into the notebook and restart to boot from it.  Select the Repair option.
    Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
    http://www.sevenforums.com/tutorials/668-system-recovery-options.html
    If the above fails to help, make a note of any error messages you may get during the procedure and include them with your next post.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • New iphone 4s and multiple questions

    So I have multiple questoins... So I tried out a droid for a couple weeks and well in the end I decided the iphone was the better choice for me. So the droid was my first smartphone and when it was set up it imported all my facebook, twitter, gmail a

  • Ok code is not getting in bp transaction

    HI All, Using BUPT i have added some custom fields in transaction BP for the role SAP Credit Management Under the Tab Fiscal Year Information. In my custom screen I have used the FM FS02_BUPA_BP021_GET to get the values in Fiscal Year Tab. Now my req

  • My computer needs to be updated but its saying its already up to date

    My macbook is saying that it is up to date when it is not. I have a new ipod nano and im trying to sync it to my itunes but will not let me because things are not up to date. I have tried to update everything but like I said its telling me its alread

  • IR scheduling and exporting the results to an output directory

    Hello, I am trying to schedule an IR job and have it to export the data to a network output folder. I am able to add the output folder and also i verified that i do have access to that folder. But, when i run this job it fails to put the file in that

  • HT1386 how can I unlock a 1st generation Ipod touch?

    how can i unlock a 1st generation ipod touch that i forgot the password to??