Rebuilding/Reseting the SCOM 2012 SP1 Data Warehouse. What is the easiest way and what steps i have to perform

Hello guys,
What are the best steps to rebuild the data warehouse ? In SCOM 2012 SP1 it is build during the initial installation and SCOM it is not giving you a tool to rebuild it. I have tried to create one DW database using the Data Warehouse Initial Setup.sql file
from the installation dvd and copied the permissions from my original DW. Although the sql script executed successfully i found some missing tables in the newly created database. So I'm not sure whether if i detach the old DW and rename the new test database
to OperatonsMangerDW it will work. Please advice on this issue. Please let me know if there is any easier approach of rebuilding/resetting the Data Warehouse database.

Hi,
I would like to suggest you refer to the below link to move the data warehouse database to a different system:
How to Move the Data Warehouse Database
http://technet.microsoft.com/en-us/library/hh268492.aspx
In addition, here is a similar thread, please refer to it:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c8e17cba-ad59-4474-9c90-787e4dec1307/create-operationsmanagerdw-manually?forum=operationsmanagergeneral
Regards,
Yan Li
Regards, Yan Li

Similar Messages

SCOM 2012 SP1- Getting Event ID 20070 on some agents and Event ID 200000 on management servers

On a significant number of my 2012 SP1 Agents, I am getting the following Event IDs in my OperationsManager event log:
20070
The OpsMgr Connector connected to XXXXXX.domain.net, but the connection was closed immediately after authentication occurred. The most likely
cause of this error is that the agent is not authorized to communicate with the server, or the server has not received configuration.
21006
The OpsMgr Connector could not connect to XXXXXX.domain.net:5723. The error code is 10060L(A connection attempt failed because the connected
party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.).
21015
OpsMgr was unable to set up a communications channel to XXXXXX.domain.net. Communication will resume when XXXXXX.domain.net is available and
communication from this computer is allowed.
On my various 2012 SP1 Management Servers, I am getting the following Event IDs in my OperationsManager event logs:
20000
A device which is not part of this management group has attempted to access this Health Service.
Requesting Device Name: servername.domain.com
Here are my settings and what I have tried:
We have agents assigned by AD-integration, and they are receiving their proper assignment
Agents are manually installed with SCCM 2012
“Automatically approve new manually installed agents” is selected
I have rebuilt the Health Service State folder and rebooted the service on the agent server
I have rebuilt the Health Service State folder on my management server and rebooted it to reset all services
On several agent servers that I am experiencing this issue, they are on the same network as their assigned management server, so there is no firewall issue.

Hi,
Here is a KB for your reference.
Troubleshooting gray agent states in System Center Operations Manager
http://support.microsoft.com/kb/2288515
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 R2 Data Warehouse failed to request a list of management packs from SQL RS server

Hello, I get this alert can someone help me out ?
I did check the Proxy and is configured on all the MS and DW server.
Alert Description
Data Warehouse failed to request a list of management packs which contain
reports deployed to SQL Reporting Services Server. Report deployment process
failed to request management pack list from SQL RS Server. The operation will be
retried.
Exception 'WebException': The request failed with HTTP status 407:
Proxy Authentication Required ( Forefront TMG requires authorization to fulfill
the request. Access to the Web Proxy filter is denied. ).
One or more
workflows were affected by this.
Workflow name:
Microsoft.SystemCenter.DataWarehouse.Deployment.Report
Instance name:
Data Warehouse Synchronization Service
Instance ID:
{FDC7C774-397C-3660-9D57-EFBED3B60329}

Every call to the SRS generates a call to the OpsMgr SDK on Root Management
Server to check permissions (security integration). It apepars the account
the call is made under does not have access.
To figure out which account is used follow this process:
1) Run console and click on "Run As Profiles" in the Administration space;
2) Double-click "Data Warehouse Report Deployment Account";
3) Click on "Run As Accounts" tab;
4) If you have a line in the accounts which lists your Root Management
Server in the "Target Computer" column, note the account name in the "Run As
Account" column. If you do not have such a line, follow steps 2-4 for the
"Default Action Account" profile and note the account name;
5) Click on "Run-As Accounts" in the Administration space and double click
the account name which you got on step 4)
6) Switch to the "Account" tab and note domain name and user name;
Once you found the account (say, DOMAIN\user) check that it is a member of
the User Role "Operations manager Report Security Administrators". If not -
add it and the process will recover automatically.
Also You can refer below links
http://blogs.technet.com/b/smsandmom/archive/2007/09/06/system-center-operations-manager-doesn-t-show-any-reports.aspx
http://www.networksteve.com/enterprise/topic.php/Data_Warehouse_failed_to_request_a_list_of_management_packs..._E/?TopicId=16627&Posts=2
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

SCOM 2012/SP1/R2 - What Is the Best Management Pack for HP Storage (P2000)

Hi all!
What would be the best recommended Management Pack for HP Storage (P2000) for the SCOM 2012/SP1/R2? Free products are privileged, of course, but we would also consider the paid ones.
Thank you very much for your time and attention!
Best regards!

Hi,
Recently I created Custom Management pack for MSA P2000 Storage. Its primary purpose is to monitor performance.
See: http://jurelab.wordpress.com/ for details.
Hope it helps
Jure

Problem upgrading from SCOM 2012 SP1 to R2 (near impossible to uninstall SCOM agent from Management Server)

I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?

Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment.

Non supported version of SQL with new install of SCOM 2012 SP1

I have SQL 2012 SP1 running on Server 2012. I have tried the SCOM installation with and without CU2 (to fix the 1618 installation error)
SC VMM installed cleanly and appears to work.
The install for SCOM produces an error that says, "The installed version of SQL Server is not supported". I have not been able to find any log from the install that has that error in it.
Also, I have not been able to determine the true requirements of the SQL server for SCOM. (I found dock SCOM 2012 RTM and SQL 2008 R2, but noting for 2012 SP1.
Can someone point me to the correct place for the install log with (hopefully more information) and/or the requrements for the SQL installation?
Roy

The log is not created yet because it has not started the install.
The firewall is the most common issue indeed. Temporarily Disable the firewall and see whether you can continue.
Are you using a developers edition? The only 2 editions supported are standard and Enterprise.
The true requirements for SCOM 2012 sp1:
We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:
SQL Server 2008 R2 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
Found here:
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
It's doing common things uncommonly well that brings succes.

Error 1723 when removing scom 2012 sp1 agent

Hi All,
I am trying to remove the scom 2012 SP1 agent from a machine and i get an error - 'Error 1723. There is a problem
with this Windows Installer package. A DLL required for this install to complete could not be run.
Any idea how can i remove the agent from the box. Let me now if any other info required to give a hint to the problem.
Durgesh Kumar

Hi,
Reinstall the agent, and the uninstall ? If possible, reboot the server and then uninstall?
Same issue here:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/get-error-1723-there-is-a-problem-with-windows/3d68fc4b-c968-4796-a270-27027a52de3f?page=2
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCOM 2012 SP1 SQL Server 2008 R2 Clustering Monitoring?

We have a new print management system that was setup using SQL server 2008 R2 clustering. Right now we have SQL MP (monitoring)(discover) 6.3.173.1. They had a failover occur a week ago and SCOM didnt throw any alerts. As a temporary
fix, I found some correlated events and setup a monitor for those events on the servers. However, the system owner wants to know if there is a MP that will monitor for a SQL cluster failover event. I have looked and looked and cant seem to find
anything that gives a whole lot of detail on this.
Thanks
EFD
Warm Fuzzies!

Yes, you can monitor SQL Cluster 2008 using SCOM 2012 SP1. but you need to install SQL MP and Windows Cluster MP and Enable proxy Agent on physical nodes.
You can refer below link {it's same for SCOM 2012}
http://blogs.technet.com/b/birojitn/archive/2010/04/14/sql-server-2008-cluster-monitoring.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SCOM 2012 Sp1 Cu4 Web Console issue logging

Hi I am having an Issue with the SCOM 2012 sp1 Cu4 Web console,
When logon to the web console its Says Singing IN,
And the loops on Initializing....
after a while I get this error,
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
System.TimeoutException: [HttpRequestTimedOutWithoutDetail]
Arguments:
http://localhost/OperationsManager/Services/DataAccessService.svc
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem.
See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.20913.00&File=System.ServiceModel.dll&Key=HttpRequestTimedOutWithoutDetail ---> System.Net.WebException ---> System.Net.WebException
   at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
   at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
   at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__0(Object sendState)
   --- End of inner exception stack trace ---
   at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
   at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
   --- End of inner exception stack trace ---
   at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.ClientBase`1.ChannelBase`1.EndInvoke(String methodName, Object[] args, IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.DataAccessServiceClientChannel.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnEndExecute(IAsyncResult result)
   at System.ServiceModel.ClientBase`1.OnAsyncCallCompleted(IAsyncResult result)
I found that the only way to fix it previously was to completely remove IIS from the server and reinstall everything connecting to the Web Console, so far its not the best way to go as I keep getting this error after 2 days,
Can anyone tell me how I would even go about diagnosing this?
Kind Regards

Got the same issue again with Update Release 2 for R2,
then found this blog, but it did not help me, only guided me in a direction
http://thoughtsonopsmgr.blogspot.com/2013/12/quick-fix-register-aspnet-40-with-iis.html
What help me was to re-add the svc-integrated-4.0 by copying and pasting the info it, same with the ScriptModule-4.0.
Don't know why that worked for me but this is a funny issue,
I also don't recommend doing this, as it only worked for me.

SCOM 2012 SP1 Web Console High Availability Configuration

We are a large children's hospital, with many ancillary units that we are trying to get to help monitor their servers/devices/applications through the SCOM web console. Due to the number of connections we have two standalone web console servers. The
entire environment is running on Windows Server 2012 Standard Edition servers, and we are running SCOM 2012 SP1 UR3. When accessing the web console directly via the FQDN of the server, everything works great. We have an HLB virtual IP and DNS entry
(SCOM.domain.com), which works flawlessly when access the default IIS website. However, when accessing the web console URL (http://SCOM.domain.com/OperationManagerdown) Negotiate:Kerberos, NTLM, Negotiate. I believe the issue lies in the fact that
the Application Pools are running under the ApplicationPoolIdentity identity, and the HTTP SPN's are using the machine account. We have tried changing the identity of the application pools to a domain account (the SDK service account), and modified the
SPN's so the HTTP SPNs are assigned to the domain account. We also created SPNs for the HLB VIP DNS alias. But to no avail. While we realize that Microsoft does not support load balancing of the web console, there has to be a way to make
it work. We will have more than 50 connections, so using one web console server is not an option, and asking our users to use two different URLs is not very user friendly. If anyone has any suggestions or had any success, please let me know.
Any help is greatly appreciated!

Is switching to forms based authentication an option? The extra login might be considered a pain however, but forms plus SSL is the only successful LM configuration we have worked with. We use F5s.
Sign Up Now for the Infinity Connected™ Full Feature 30 Day Trial
Visit the Infinity Connected™ Support Center
Visit Our Website: http://www.infinityconnected.com
Visit Our Blog: http://blog.mobieus.com
Want to just talk shop? 1-800-691-6774 / [email protected]
Monitoring Information Center | Infinity On-Line | [email protected]

SCOM 2012 SP1 Upgrade - RMS fine but can't upgrade reporting or web console

Hi,
We've just upgraded our RMS to SCOM 2012 SP1 and everything went smoothly as per the documentation. However when I next try to upgrade the Reporting or Web Consoles (located on separate servers) to SP1 I am presented with a message saying:
"The management server to which this component reports has not been upgraded".
At that point we cannot proceed past the prerequisite checker.
I am totally confident that the SP1 upgrade went through on the RMS and all file versions are at SP1.
Can anyone help please?
Thanks,
Tim

Hi Retee,
I was not able to find a fix for this but I did find a workaround.
1. I copied the installation files from the SCOM 2012 SP1 DVD/ISO to a folder, SCOM_2012_INSTALL on the reporting server.
2. Browsed to the following folder ..\SCOM_2012_INSTALL\setup\AMD64\ and commented out the following section of the IntermilestoneUpgradePrereqs.xml file:

3. Ran ..\SCOM_2012_INSTALL\setup.exe and the upgrade was successful.
Our SCOM infrastructure has now been at 2012 R2 for a couple of months and I have not seen any issues caused by commenting out this section. But as always, use at your own risk.
Hope this helps.
Thanks,
Iain

Frequency migrate data from the operational database SCOM 2012 SP1

What is the frequency with which
information is migrated from the operational database
to the data warehouse database,
are in separate servers and should perform
maintenance tasks such as defragmentation to optimize
disk space, this is recommended?
thank you very much

Hi
Refer below link for data sync from DB to DW
http://blogs.technet.com/b/jonathanalmquist/archive/2010/01/24/how-and-when-is-data-written-or-synchronized-to-the-data-warehouse.aspx
Dataware house
http://blogs.technet.com/b/stefan_stranger/archive/2009/08/15/everything-you-wanted-to-know-about-opsmgr-data-warehouse-grooming-but-were-afraid-to-ask.aspx
Regards
sridhar v

SCOM 2012 SP1 availability report in MS Generic Report Libary shows inaccurate data

Hi,
in SCOM 2012 sp1, we have the generic availability report showing many of our web sites with no up time beyond a certain date. The web sites are ok, the web availability monitors are all healthy and the monitors test ok
None of these web availability tests are in Maintenance mode although what we are observing certainly makes us think that they are.
We also have a Web transaction login monitor for WEBSITE(A) that does not show this same outage for a login test.
However WEBSITE(A)'s availability monitor shows the same downtime as the other web availability tests.
Any thoughts on where to look for this problem? Im guessing its a problem placing the data in the Warehouse?
Thanks Lance

Hi,
Based on my understanding, the report shows there is downtime for the web site, but the web site did work well always.
It seems like that there is old data stored in data warehouse, would you please check the report for recent date, such as one day or two days.
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 SP1 - PowerShell Script failed to run - 3 alerts appear after every reboot of the SCOM Server

Brand new SCOM 2012 SP1 install with Update Rollup 1 applied
Single server, local SQL install, SQL Server 2012 SP1
Hyper-V VM running on Server 2012. VM has 8GB Ram, single vCPU
Going through initial management pack importing and configuration, at this point I have the Windows Server 2012 and SQL 2012 MP's installed.
See screenshot
http://i.imgur.com/l0Molh1.png
I am getting the following alerts in my SCOM console and cannot find a resolution to fix the issue. I don't want to set an override, as an override will prevent the PowerShell alert in other instances, where I might want to receive an alert.
Looking at the alert description, it states "The Data Access service is either not running or not yet initialized"
The SCOM Console launches and responds fine, and I get no other errors. I check the Data Access service and it is online. I have left the system alone for a couple of hours and no other errors. I then closed those alerts and restarted the
server, and they came right back in, so I know that this is something that is happening at either server startup of during the start of the SCOM services.
Is it possible that SCOM is trying to execute these scripts and the Data Access service has not come online yet?
Has anyone else come across this before?

Please try the method in the following thread:
Note: As there is operations related to Registry, please perform a backup before doing this.
OpsMgr 2012 - Power Shell Script failed to run
http://social.technet.microsoft.com/Forums/de-DE/systemcenterde/thread/4be37f8d-1e7b-450c-8cb9-f1e95f3b2bd0/
Thanks.
Nicholas Li
TechNet Community Support

System center data access service crashes with event id 26339 ad 26380 in SCOM 2012 Sp1 RTM

hi all,
I have deployed scom 2012 sp1 rtm on Os 2012 std and database is on another VM Machine having SQL 2012 sp1 with OS 2008 R2 SP1 std, suddenly sql vm get stopped and unable to start , so I have delete it from hyper-v 2012 console and imported the VM again
in Hyper-0S 2012 cluster.
Now, System centre data access service get crashed again and again with mentioned events
event 26339, OpsMgr SDKService
event 26380, opsmgr SDkService
An exception was thrown while initializing the service container.
Exception message: Initialize
Full exception: HTTP could not register URL
http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file
because it is being used by another process
   at System.Net.HttpListener.AddAllPrefixes()
   at System.Net.HttpListener.Start()
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   --- End of inner exception stack trace ---
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener)
   at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback)
   at System.ServiceModel.Channels.HttpChannelListener`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at Microsoft.EnterpriseManagement.ConnectorFramework.ServiceDataLayer.ConnectorFrameworkDataAccessChannel.Initialize()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
Kirpal Singh

Hi Kirpal
Can you try this it might help as its an known issue of getting event id 's 26361,26380 try out & lets see if it helps.
The manifest files are located on the RMS at the \Program Files\System Center Operations Manager 2007\ root directory. The manifest files will need to be edited for the config and sdk service on affected RMS. The file names are:
Microsoft.Mom.Sdk.ServiceHost.exe.config
Microsoft.Mom.ConfigServiceHost.exe.config
In between the EXISTING <runtime> and </runtime> lines – you need to ADD a NEW LINE with the following:
<generatePublisherEvidence enabled="false"/>
This solution disables CRL checking for the specified execute-ables, permanently.

Rebuilding/Reseting the SCOM 2012 SP1 Data Warehouse. What is the easiest way and what steps i have to perform

Similar Messages

Maybe you are looking for