Receipt of EBS multiple times in a day (Electronic Bank Statement)

Hi Gurus,
We had a requirement for receipt of Bank statement, in a single day we have to receive bank statement twice a day, but in both statements some transactions will be repeated.
Now my question is once in the morning statement came, then postings will be made in the system based on the transaction information in the bank statement. Then later in the evening for the second bank statement if postings are to be made, then how system will respond to the already posted transactions, as some transactions in the statement will be repeated in the evening statement also.
Please let me know how system will respond for this type of scenario or will there be not any problem?
Thanks in advance
regards
srikanth.

solved

Similar Messages

I 4 is hanging multiple times during the day. have reset, reinstalled IOS7, the prob persists. taken to the pphone to the service centre. they reset it too. the problem stands. whatr to do next???

i 4 is hanging multiple times during the day / restarting. i have reset, reinstalled IOS7, the prob persists. taken to the pphone to the service centre. they reset it too. the problem stands. whatr to do next???

Hi Suzy Q,
I can send and receive calls.
I get "messaging stopped" when doing a lot of texts.
Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
It runs slow.
I have 5 apps on here. I should be able to have a lot of apps on here, and play music, and have files, and...and....and.
I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
I get VZWAVS has stopped. (not sure if those are the right letters)
The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
I get a black screen on occasion.
sometimes the proximity sensor doesn't work.
sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
I soft reboot often--turn it off wait a bit and

Upload client data to task server multiple times in same day

I am just getting started setting up the task server piece of ARD. My task server is an Xserve(PowerPC 10.4) and my client computers are mostly eMacs running 10.4. My client computers are all running Deep Freeze by Faronics which causes the hard drive to be restored to it's original state after a restart.
My question is - where does the report information about the client computer get stored before it is uploaded to the task server. Is it cached on the local client machine? My concern is that if the client computers don't upload their data until the end of the day and a student restarts a computer during the day we won't have a whole day of data recorded for that machine.
If this is the case, is there any way to upload the data to the task server multiple times in the same day?
Thanks!

I am collecting User History and Application Usage. Where is the cache stored - on the local client machine or on the task server? If it's stored on the local machine and one of the students restarts the computer the data will be gone because of the Deep Freeze program. That's why I'm trying to figure out a way to upload the data multiple times throughout the day.
I'm hoping that the data is cached on the task server so that I don't have to try to upload multiple times.

EBS - Electronic Bank Statement Multiple Posting Rule for One External Transaction Type NTRF

hello SAP Gurus,
I'm configuring EBS - Electronic Bank Statement. My requirement is for Bank External Transaction Type NTRF <for Incoming Payment> I want to assign 2 posting rules for Posting Area 2 that is Sub-Ledger posting viz. <1> For the payments received from Customer which should clear the Customer Open item since it is bill to bill exactly matching the open line item and <2> For the payments which should not clear the Customer Open item since i know that they are not bill to bill and only partial against the original line item
Is this possible? if yes then how?
Currently, SAP allows only one assignment like one external transaction type NTRF => one Posting Rule <either clear the sub-ledger-system picks FB05 or just post on Sub-ledger so that not to clear - system uses FB01 >
Journal for Posting Area 2:
Bank Clearing Account Dr
To Customer Account Cr <either set this to clear with original invoice / or just post on customer so as to clear/handle it manually later on once paid fully>
So, what is the solution; how can i differentiate my incoming whether fully payment or partial payment; since bank statement always tag it to external transaction type NTRF always for any incoming payments !
regards,
`raj.

Hi,
You cannot create separate rule with sub ledger postings while executing electronic bank reconciliation.The reason is your bill to bill transfers should posted to bank sub ledger account first and then you can write a BDC to clear sub ledger account.Otherwise use F.13 to clear the sub ledger account.
Regards
Chrishantha

Automatic Import of Electronic Bank Statements (EBS)

Hi SAP Gurus,
We want to solve the following issue:
Daily we receive multiple Electronic Bank Statements by means of banking Communication Software (BCS).
Those EBS files are stored on our SAP Application Server, filetype = SWIFT MT940 format,
and the file name contains a date and time stamp.
File name example: MT940.90910077527_20101124_210421_167660
Currently the import of these EBS-files is done manually via transaction FF_5 (program: RFEBKA00).
We want to automate this import process.
Every time a new EBS-files arrives (in a specific directory) on the application sever
a signal (including the filename) should be send to SAP, so SAP knows there is a new EBS-file available for import.
SAP now runs program RFEBKA00, with the provide filename, in the background.
Any ideas how to do this?
Some tech. info:
Windows Server 2003 R2 SP2 64-bit
Oracle 10.2.0.4
SAP R/3 Enterprise 47x200
Thanks,
Roger Vanaubel

Hi
I think there are several ways to do it. In our case, we have a program which concatenates all received files into a single file and which launches RFEBKA00. It runs at fixed time, outside the working hours of accounting clerks. It is possible to trigger the program at file receipt, but there are problems if somebody is working in FEBA at the same time RFEBKA00 is working on the same bank account: then RFEBKA00 stops without doing all postings.
If you trigger RFEBKA00 at file receipt, you may have several jobs running in parallel, and if 2 bank statements received in separate files are for the same account, you will have the same problem.

Electronic Bank Statement (EBS)

Hi All,
My Client is implemented Electronic Bank Statement using BAI format.
GL Accounts set up is wrong (all bank accounts should be clearing type accounts (Open Item managed, except Operating Account (Main bank account))),but these accounts are not set up as open item management.
How can I handle this issue and is it possible to create new accounts or any other alternative solution? Any help is appreciated.
I will assign points.
Thanks,
Rau

HI
Before executing the programe RFSEPA02 ask your ABAP person to convert the programe to Zprograme as below so that this problem will solve you
*ZFI_OPEN_ITEM_MANAGE-TO APPLY OPEN ITEM MANAGE TICK
*& Report ZFI_OPEN_ITEM_MANAGE
REPORT ZFI_OPEN_ITEM_MANAGE MESSAGE-ID FH LINE-SIZE 80.
THIS IS NOT A STANDARD PROGRAM.
IT IS ONLY INCLUDED FOR CONVENIENCE IN CASE IT WILL BE NEEDED.
ONLY USE IT AFTER CONSULTING WITH SAP. S6DK909852
*REPORT RFSEPA02 MESSAGE-ID FH LINE-SIZE 80.
INCLUDE FSACHCDF.
INCLUDE FSACHCDV.
TABLES: BSIS,
        BSAS,
        BSEG,
        BKPF,
        GLT0,
        T001.
DATA: BEGIN OF T_BSXX OCCURS 100.
        INCLUDE STRUCTURE BSIS.
DATA: END OF T_BSXX.
DATA: BEGIN OF T_LISTE OCCURS 300,
        GJAHR    LIKE BKPF-GJAHR,
        BELNR    LIKE BKPF-BELNR,
        SORT     TYPE I,
        TABLE(4) TYPE C,
        TYPE     TYPE C,
        OK       TYPE C,
      END OF T_LISTE.
DATA: D_MAX         LIKE SY-TFILL VALUE '100',
      D_BELNR       LIKE BSEG-BELNR,
    D_TFILL       LIKE SY-TFILL.        "<<<< DELETE - NOTE 70203
      D_TFILL       LIKE SY-TFILL,     "<<<< INSERT - NOTE 70203
      D_STORNO      TYPE C.            "<<<< INSERT - NOTE 70203
DATA: BALANCE_ITEMS   LIKE GLT0-HSL01,
      BALANCE_ACCOUNT LIKE GLT0-HSL01.
*>>>> BEGIN OF INSERTION - NOTE 66156 <<<<
DATA: XGLEDTAB LIKE GLEDTAB OCCURS 1 WITH HEADER LINE.
DATA: BEGIN OF BK_METHODE,
        HWAE1 LIKE T001-WAERS,
        HWAE2 LIKE T001-WAERS,
        HWAE3 LIKE T001-WAERS,
        CURT1 LIKE X001-CURT2,
        CURT2 LIKE X001-CURT2,
        CURT3 LIKE X001-CURT2,
      END OF BK_METHODE.
DATA: BEGIN OF T_BALANCE_ITEMS_HW OCCURS 1,
        WAERS1 LIKE T001-WAERS,
        VALUE1 LIKE GLT0-HSLVT,
        WAERS2 LIKE T001-WAERS,
        VALUE2 LIKE GLT0-HSLVT,
        WAERS3 LIKE T001-WAERS,
        VALUE3 LIKE GLT0-HSLVT,
      END OF T_BALANCE_ITEMS_HW.
DATA: BEGIN OF T_BALANCE_ACCOUNT_HW OCCURS 1,
        WAERS1 LIKE T001-WAERS,
        VALUE1 LIKE GLT0-HSLVT,
        WAERS2 LIKE T001-WAERS,
        VALUE2 LIKE GLT0-HSLVT,
        WAERS3 LIKE T001-WAERS,
        VALUE3 LIKE GLT0-HSLVT,
      END OF T_BALANCE_ACCOUNT_HW.
DATA: BEGIN OF T_BALANCE_ITEMS_TW OCCURS 1,
        WAERS LIKE GLT0-RTCUR,
        VALUE LIKE GLT0-TSLVT,
      END OF T_BALANCE_ITEMS_TW.
DATA: BEGIN OF T_BALANCE_ACCOUNT_TW OCCURS 10,
        WAERS LIKE GLT0-RTCUR,
        VALUE LIKE GLT0-TSLVT,
      END OF T_BALANCE_ACCOUNT_TW.
*>>>> END OF INSERTION - NOTE 66156 <<<<
DATA: NUM_BSEG_SELECT LIKE SY-TFILL,
      NUM_BSEG_UPDATE LIKE SY-TFILL,
      NUM_BSIS_INSERT LIKE SY-TFILL,
      NUM_BSIS_SELECT LIKE SY-TFILL,
      NUM_BSIS_UPDATE LIKE SY-TFILL,
      NUM_BSAS_INSERT LIKE SY-TFILL,
      NUM_BSAS_SELECT LIKE SY-TFILL,
      NUM_BSAS_UPDATE LIKE SY-TFILL.
CONSTANTS: CHAR_I     TYPE C VALUE 'I',
           CHAR_S     TYPE C VALUE 'S',
           CHAR_U     TYPE C VALUE 'U'.
*PARAMETER:     P_BUKRS LIKE BSEG-BUKRS OBLIGATORY.
                                       "<<<< DELETE NOTE - 62751
*PARAMETER:     P_SAKNR LIKE BSEG-HKONT OBLIGATORY.
                                       "<<<< DELETE NOTE - 62751
*>>>> BEGIN OF INSERTION - NOTE 62751 <<<<
PARAMETERS:     P_BUKRS LIKE BKPF-BUKRS OBLIGATORY.
PARAMETERS:     P_SAKNR LIKE SKA1-SAKNR OBLIGATORY
                                  MATCHCODE OBJECT SAKO.
*>>>> END OF INSERTION - NOTE 62751 <<<<
SELECT-OPTIONS P_BELNR FOR BSEG-BELNR.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK B01 WITH FRAME TITLE TEXT-B01.
PARAMETERS:    P_LISTE AS CHECKBOX DEFAULT 'X'.    " list protocol on
SELECTION-SCREEN END OF BLOCK B01.
INITIALIZATION.
CALL FUNCTION 'POPUP_DISPLAY_TEXT'
       EXPORTING
            POPUP_TITLE    = ' '
            TEXT_OBJECT    = 'RFSEPA02'
       EXCEPTIONS
            TEXT_NOT_FOUND = 1
            OTHERS         = 2.
*{   DELETE         DMUK903910                                        1
LEAVE PROGRAM.
*}   DELETE
AT SELECTION-SCREEN ON P_SAKNR.
PERFORM CHECK_ACCOUNT.               " locked for posting?
PERFORM CHECK_ACCOUNT2.              "<<<< INSERT - NOTE 66156
PERFORM ENQUEUE_ACCOUNT.             "<<<< DELETE - NOTE 65191
START-OF-SELECTION.
PERFORM ENQUEUE_ACCOUNT.             "<<<< INSERT - NOTE 65191
PERFORM CHECK_AUTHORITY_SKA1_BUK.
PERFORM CHECK_AUTHORITY_SKA1_BES.
PERFORM CHECK_ACCOUNT_BALANCE.       "<<<< DELETE - NOTE 66156
PERFORM CHECK_ACCOUNT_BALANCE_2.     "<<<< INSERT - NOTE 66156
*--- BSIS -
CLEAR D_BELNR.
CLEAR T_LISTE. REFRESH T_LISTE.
CLEAR T_BSXX. REFRESH T_BSXX.
DO.
    PERFORM SELECT_ITEMS USING 'BSIS' D_TFILL.
    IF D_TFILL EQ 0.
      EXIT.
    ENDIF.
    LOOP AT T_BSXX.
      PERFORM BKPF_UPDATE.             "<<<< INSERT - NOTE 70203
      PERFORM BSEG_UPDATE.
      PERFORM BSXX_UPDATE USING 'BSIS'.
    ENDLOOP.
    PERFORM WRITE_LIST_PROTOCOL.
    COMMIT WORK.
ENDDO.
*--- BSAS -
CLEAR D_BELNR.
CLEAR T_LISTE. REFRESH T_LISTE.
CLEAR T_BSXX. REFRESH T_BSXX.
DO.
    PERFORM SELECT_ITEMS USING 'BSAS' SY-TFILL.
    IF SY-TFILL EQ 0.
      EXIT.
    ENDIF.
    LOOP AT T_BSXX.
      PERFORM BSEG_UPDATE.
      PERFORM BSXX_UPDATE USING 'BSAS'.
    ENDLOOP.
    PERFORM WRITE_LIST_PROTOCOL.
    COMMIT WORK.
ENDDO.
PERFORM WRITE_PROTOCOL.
END-OF-SELECTION.
PERFORM CHANGE_ACCOUNT.
PERFORM DEQUEUE_ACCOUNT.
TOP-OF-PAGE.
ULINE.
WRITE:/   SY-VLINE,
         2 TEXT-001,
         25 P_SAKNR INTENSIFIED OFF,
         80 SY-VLINE.
WRITE:/   SY-VLINE,
         2 TEXT-002,
         25 P_BUKRS INTENSIFIED OFF,
         80 SY-VLINE.
ULINE.
IF P_LISTE = 'X'.
    WRITE:/          SY-VLINE,
              2(10) TEXT-S01 COLOR COL_HEADING,
              12     SY-VLINE,
              13(4) TEXT-S02 COLOR COL_HEADING,
              17     SY-VLINE,
              18(62) TEXT-S03 COLOR COL_HEADING,
              80     SY-VLINE.
ENDIF.
*&      Form SELECT_ITEMS
FORM SELECT_ITEMS USING TABLE TYPE C
                        FILL LIKE SY-TFILL.
SELECT * FROM (TABLE) INTO TABLE T_BSXX
                        UP TO D_MAX ROWS
                       WHERE BUKRS EQ P_BUKRS
                         AND HKONT EQ P_SAKNR
                         AND BELNR IN P_BELNR
                         AND XOPVW EQ SPACE.
FILL = SY-DBCNT.
*--- PROTOCOL -
LOOP AT T_BSXX.
    PERFORM SAVE_PROTOCOL USING T_BSXX-BELNR T_BSXX-GJAHR
                                1 TABLE CHAR_S 1.
ENDLOOP.
SORT T_BSXX BY MANDT BUKRS BELNR GJAHR.
ENDFORM.                               " SELECT_ITEMS
*&      Form BSEG_UPDATE
FORM BSEG_UPDATE.
SELECT SINGLE * FROM BSEG WHERE BUKRS = T_BSXX-BUKRS
                            AND   GJAHR = T_BSXX-GJAHR
                            AND   BELNR = T_BSXX-BELNR
                            AND   BUZEI = T_BSXX-BUZEI.
IF BSEG-KTOSL = 'MVA' OR BSEG-KTOSL = 'VVA'.
    MESSAGE A145(FH) WITH BSEG-HKONT.
ENDIF.
IF BSEG-KOART = 'M'.
    MESSAGE A144(FH) WITH P_SAKNR BSEG-BSCHL.
ENDIF.
UPDATE BSEG SET XOPVW = 'X'
            WHERE BUKRS EQ T_BSXX-BUKRS
              AND GJAHR EQ T_BSXX-GJAHR
              AND BELNR EQ T_BSXX-BELNR
              AND BUZEI EQ T_BSXX-BUZEI.
*--- PROTOCOL -
PERFORM SAVE_PROTOCOL USING T_BSXX-BELNR T_BSXX-GJAHR
                              2 'BSEG' CHAR_U SY-DBCNT.
ENDFORM.                               " BSEG_UPDATE
*&      Form BSIS_UPDATE
FORM BSXX_UPDATE USING TABLE TYPE C.
T_BSXX-XOPVW = 'X'.
IF D_STORNO = 'X' AND TABLE = 'BSIS'."<<<< INSERT - NOTE 70203
    T_BSXX-XSTOV = SPACE.              "<<<< INSERT - NOTE 70203
ENDIF.                               "<<<< INSERT - NOTE 70203
UPDATE (TABLE) FROM T_BSXX.
*--- PROTOCOL -
PERFORM SAVE_PROTOCOL USING T_BSXX-BELNR T_BSXX-GJAHR
                              1 TABLE CHAR_U SY-DBCNT.
ENDFORM.                               " BSIS_UPDATE
*&      Form CHECK_ACCOUNT_BALANCE
FORM CHECK_ACCOUNT_BALANCE.
DATA:   D_GJAHR LIKE BSEG-GJAHR.
Account balance
PERFORM READ_T001 USING P_BUKRS.
PERFORM READ_CURRENT_YEAR CHANGING D_GJAHR.
PERFORM READ_GLDB USING P_BUKRS P_SAKNR D_GJAHR.
PERFORM READ_BSIS USING P_BUKRS P_SAKNR.
IF BALANCE_ITEMS NE BALANCE_ACCOUNT.
    MESSAGE E099.
Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
ENDIF.
ENDFORM.                               " CHECK_ACCOUNT_BALANCE
*&      Form READ_T001
FORM READ_T001 USING BUKRS LIKE T001-BUKRS.
SELECT SINGLE * FROM T001 WHERE BUKRS = BUKRS.
IF SY-SUBRC <> 0.
    MESSAGE E001 WITH BUKRS.
ENDIF.
ENDFORM.                               " READ_T001
*&      Form READ_CURRENT_YEAR
FORM READ_CURRENT_YEAR CHANGING GJAHR LIKE T009B-BDATJ.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
       EXPORTING
            I_DATE         = SY-DATUM
            I_PERIV        = T001-PERIV
       IMPORTING
            E_GJAHR        = GJAHR
       EXCEPTIONS
            T009_NOTFOUND = 1
            INPUT_FALSE    = 1
            T009B_NOTFOUND = 1.
ENDFORM.                               " READ_CURRENT_YEAR
*&      Form READ_GLDB
FORM READ_GLDB USING XBUKRS LIKE GLT0-BUKRS
                     XSAKNR LIKE GLT0-RACCT
                     XGJAHR LIKE GLT0-RYEAR.
SELECT * FROM GLT0
           WHERE RLDNR = '00'
           AND   RRCTY = '0'
           AND   RVERS = '001'
           AND   BUKRS = XBUKRS
           AND   RYEAR = XGJAHR
           AND   RACCT = XSAKNR.
    PERFORM CALCULATE_BALANCE.
ENDSELECT.
ENDFORM.                               " READ_GLDB
      FORM CALCULATE_BALANCE                                        *
FORM CALCULATE_BALANCE.
DATA: BALANCE LIKE GLT0-TSL01.
BALANCE_ACCOUNT = BALANCE_ACCOUNT + GLT0-HSLVT.
DO GLT0-RPMAX TIMES
     VARYING BALANCE FROM GLT0-HSL01 NEXT GLT0-HSL02.
    BALANCE_ACCOUNT = BALANCE_ACCOUNT + BALANCE.
ENDDO.
ENDFORM.                               " CALCULATE_BALANCE
*&      Form READ_BSIS
FORM READ_BSIS USING BUKRS LIKE BSIS-BUKRS
                     SAKNR LIKE BSIS-HKONT.
SELECT * FROM BSIS
         WHERE BUKRS = BUKRS
         AND    HKONT = SAKNR.
    IF BSIS-SHKZG = 'S'.
      BALANCE_ITEMS = BALANCE_ITEMS + BSIS-DMBTR.
    ELSE.
      BALANCE_ITEMS = BALANCE_ITEMS - BSIS-DMBTR.
    ENDIF.
ENDSELECT.
ENDFORM.                               " READ_BSIS
*&      Form CHANGE_ACCOUNT
FORM CHANGE_ACCOUNT.
SKB1       = *SKB1.
SKB1-XOPVW = 'X'.
OBJECTID    = T001-KTOPL.
OBJECTID+4 = SKB1-SAKNR.
OBJECTID+14 = SKB1-BUKRS.
UPD_SKB1    = 'U'.
UTIME       = SY-UZEIT.
UDATE       = SY-DATUM.
USERNAME    = SY-UNAME.
PERFORM CD_CALL_SACH.
CALL FUNCTION 'GL_ACCOUNT_IN_COMPANY_UPDATE'
       EXPORTING
            I_SKB1 = SKB1.
COMMIT WORK.
ENDFORM.                               " CHANGE_ACCOUNT
*&      Form ENQUEUE_ACCOUNT
FORM ENQUEUE_ACCOUNT.
CALL FUNCTION 'ENQUEUE_EFSKB1'
       EXPORTING
            BUKRS          = P_BUKRS
            SAKNR          = P_SAKNR
       EXCEPTIONS
            FOREIGN_LOCK   = 1
            SYSTEM_FAILURE = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E042 WITH P_SAKNR P_BUKRS.
    WHEN 2.
      MESSAGE E038 WITH P_SAKNR P_BUKRS.
ENDCASE.
ENDFORM.                               " ENQUEUE_ACCOUNT
*&      Form DEQUEUE_ACCOUNT
FORM DEQUEUE_ACCOUNT.
CALL FUNCTION 'DEQUEUE_EFSKB1'
       EXPORTING
            BUKRS          = P_BUKRS
            SAKNR          = P_SAKNR
       EXCEPTIONS
            SYSTEM_FAILURE = 1.
ENDFORM.                               " DEQUEUE_ACCOUNT
      FORM WRITE_LIST_PROTOCOL                                      *
      writes list protocol                                          *
FORM WRITE_LIST_PROTOCOL.
DATA: TEXT(62)   TYPE C,
        SAVE_BELNR LIKE BKPF-BELNR.
DESCRIBE TABLE T_LISTE LINES SY-TFILL.
CHECK P_LISTE = 'X'.
CHECK SY-TFILL > 0.
SORT T_LISTE BY GJAHR BELNR SORT TYPE.
LOOP AT T_LISTE.
    CHECK T_LISTE-OK = 1.
    CASE T_LISTE-TABLE.
      WHEN 'BSEG'.
        CASE T_LISTE-TYPE.
          WHEN CHAR_S.
            TEXT = TEXT-BE1.
          WHEN CHAR_U.
            TEXT = TEXT-BE2.
        ENDCASE.
      WHEN 'BSIS'.
        CASE T_LISTE-TYPE.
          WHEN CHAR_S.
            TEXT = TEXT-XX1.
            REPLACE '&TAB' WITH T_LISTE-TABLE INTO TEXT.
          WHEN CHAR_U.
            TEXT = TEXT-XX2.
            REPLACE '&TAB' WITH T_LISTE-TABLE INTO TEXT.
          WHEN CHAR_I.
            TEXT = TEXT-XX3.
            REPLACE '&TAB' WITH T_LISTE-TABLE INTO TEXT.
        ENDCASE.
      WHEN 'BSAS'.
        CASE T_LISTE-TYPE.
          WHEN CHAR_S.
            TEXT = TEXT-XX1.
            REPLACE '&TAB' WITH T_LISTE-TABLE INTO TEXT.
          WHEN CHAR_U.
            TEXT = TEXT-XX2.
            REPLACE '&TAB' WITH T_LISTE-TABLE INTO TEXT.
          WHEN CHAR_I.
            TEXT = TEXT-XX3.
            REPLACE '&TAB' WITH T_LISTE-TABLE INTO TEXT.
        ENDCASE.
    ENDCASE.
    AT NEW BELNR.
      ULINE.
      WRITE:/       SY-VLINE,
              2     T_LISTE-BELNR COLOR COL_KEY,
              12    SY-VLINE,
              13    T_LISTE-GJAHR COLOR COL_KEY,
              17    SY-VLINE.
    ENDAT.
    IF SAVE_BELNR <> T_LISTE-BELNR.
      WRITE: 18(62) TEXT COLOR COL_NORMAL INTENSIFIED OFF,
                80 SY-VLINE.
      SAVE_BELNR = T_LISTE-BELNR.
    ELSE.
      WRITE:/       SY-VLINE,
             12     SY-VLINE,
             17     SY-VLINE,
             18(62) TEXT COLOR COL_NORMAL INTENSIFIED OFF,
             80     SY-VLINE.
    ENDIF.
ENDLOOP.
ULINE.
ENDFORM.                               " WRITE_LIST_PROTOCOL
      FORM WRITE_PROTOCOL                                           *
      writes normal protocol                                        *
FORM WRITE_PROTOCOL.
DATA: TEXT(62)   TYPE C.
*- selected items-----
IF NOT ( NUM_BSIS_SELECT = 0 ).
    TEXT = TEXT-NX1.
    REPLACE '&TAB' WITH 'BSIS' INTO TEXT.
    WRITE:/        SY-VLINE,
            2(58) TEXT COLOR COL_KEY INTENSIFIED ON,
            60(1) SY-VLINE,
            61(19) NUM_BSIS_SELECT COLOR COL_NORMAL INTENSIFIED OFF,
            80     SY-VLINE.
ENDIF.
IF NOT ( NUM_BSAS_SELECT = 0 ).
    TEXT = TEXT-NX1.
    REPLACE '&TAB' WITH 'BSAS' INTO TEXT.
    WRITE:/        SY-VLINE,
            2(58) TEXT COLOR COL_KEY INTENSIFIED ON,
            60(1) SY-VLINE,
            61(19) NUM_BSAS_SELECT COLOR COL_NORMAL INTENSIFIED OFF,
            80     SY-VLINE.
ENDIF.
IF NOT ( NUM_BSEG_SELECT = 0 ).
    WRITE:/       SY-VLINE,
            2(58) TEXT-NB1 COLOR COL_KEY INTENSIFIED ON,
            60(1) SY-VLINE,
            61(19) NUM_BSEG_SELECT COLOR COL_NORMAL INTENSIFIED OFF,
            80     SY-VLINE.
ENDIF.
*- changed items-----
IF NUM_BSIS_UPDATE > 0.
    TEXT = TEXT-NX2.
    REPLACE '&TAB' WITH 'BSIS' INTO TEXT.
    WRITE:/        SY-VLINE,
             2(58) TEXT COLOR COL_KEY INTENSIFIED ON,
            60(1) SY-VLINE,
            61(19) NUM_BSIS_UPDATE COLOR COL_NORMAL INTENSIFIED OFF,
            80     SY-VLINE.
ENDIF.
IF NUM_BSAS_UPDATE > 0.
    TEXT = TEXT-NX2.
    REPLACE '&TAB' WITH 'BSAS' INTO TEXT.
    WRITE:/        SY-VLINE,
             2(58) TEXT COLOR COL_KEY INTENSIFIED ON,
             60(1) SY-VLINE,
             61(19) NUM_BSAS_UPDATE COLOR COL_NORMAL INTENSIFIED OFF,
             80     SY-VLINE.
ENDIF.
IF NUM_BSEG_UPDATE > 0.
    WRITE:/        SY-VLINE,
             2(58) TEXT-NB2 COLOR COL_KEY INTENSIFIED ON,
            60(1) SY-VLINE,
            61(19) NUM_BSEG_UPDATE COLOR COL_NORMAL INTENSIFIED OFF,
            80     SY-VLINE.
ENDIF.
ULINE.
ADD NUM_BSIS_SELECT TO NUM_BSAS_SELECT.
IF NUM_BSAS_SELECT = 0.
    ULINE.
    WRITE:/       SY-VLINE,
            2(78) TEXT-NSB COLOR COL_NEGATIVE,
            80    SY-VLINE.
    ULINE.
ENDIF.
ENDFORM.
*>>>> BEGIN OF INSERTION - NOTE 66156
*&      Form CHECK_ACCOUNT_BALANCE_2
FORM CHECK_ACCOUNT_BALANCE_2.
DATA:   D_GJAHR LIKE BSEG-GJAHR.
Account balance
PERFORM READ_T001 USING P_BUKRS.
PERFORM READ_CURRENT_YEAR CHANGING D_GJAHR.
PERFORM READ_CURRENCY_T001A USING P_BUKRS.
Transaktionswährung & Hauswährung
PERFORM READ_GLDB_2 USING P_BUKRS P_SAKNR D_GJAHR.
PERFORM READ_BSIS_2 USING P_BUKRS P_SAKNR.
BEGIN OF INSERTION
LOOP AT T_BALANCE_ITEMS_TW WHERE VALUE = 0.
    DELETE T_BALANCE_ITEMS_TW.
ENDLOOP.
LOOP AT T_BALANCE_ACCOUNT_TW WHERE VALUE = 0.
    DELETE T_BALANCE_ACCOUNT_TW.
ENDLOOP.
LOOP AT T_BALANCE_ITEMS_HW WHERE VALUE1 = 0
                             AND   VALUE2 = 0
                             AND   VALUE3 = 0.
    DELETE T_BALANCE_ITEMS_HW.
ENDLOOP.
LOOP AT T_BALANCE_ACCOUNT_HW WHERE VALUE1 = 0
                               AND   VALUE2 = 0
                               AND   VALUE3 = 0.
    DELETE T_BALANCE_ACCOUNT_HW.
ENDLOOP.
END OF INSERTION
IF T_BALANCE_ITEMS_HW[] <> T_BALANCE_ACCOUNT_HW[] OR
     T_BALANCE_ITEMS_TW[] <> T_BALANCE_ACCOUNT_TW[].
    PERFORM DEQUEUE_ACCOUNT.
    MESSAGE E099.
Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
ENDIF.
ENDFORM.                               " CHECK_ACCOUNT_BALANCE_2
*&      Form READ_GLDB_2
FORM READ_GLDB_2 USING XBUKRS LIKE GLT0-BUKRS
                       XSAKNR LIKE GLT0-RACCT
                       XGJAHR LIKE GLT0-RYEAR.
DATA: TYPE(3) TYPE C,
        CURT    LIKE BK_METHODE-CURT1.
DATA: RESULT LIKE T_BALANCE_ACCOUNT_TW OCCURS 1 WITH HEADER LINE.
CLEAR T_BALANCE_ACCOUNT_TW.
CLEAR T_BALANCE_ACCOUNT_HW.
Transaktionswährung
CLEAR RESULT. REFRESH RESULT.
CLEAR XGLEDTAB. REFRESH XGLEDTAB.
TYPE = 'TW'.
XGLEDTAB-RLDNR      = '00'.
APPEND XGLEDTAB.
PERFORM READ_LEDGER TABLES RESULT XGLEDTAB
                              USING XBUKRS XSAKNR XGJAHR TYPE.
LOOP AT RESULT.
    T_BALANCE_ACCOUNT_TW-WAERS = RESULT-WAERS.
    T_BALANCE_ACCOUNT_TW-VALUE = RESULT-VALUE.
    APPEND T_BALANCE_ACCOUNT_TW.
ENDLOOP.
1. Hauswährung
CLEAR RESULT. REFRESH RESULT.
CLEAR XGLEDTAB. REFRESH XGLEDTAB.
TYPE = 'HW1'.
CURT = BK_METHODE-CURT1.
XGLEDTAB-RLDNR      = '00'.
APPEND XGLEDTAB.
PERFORM READ_LEDGER TABLES RESULT XGLEDTAB
                              USING XBUKRS XSAKNR XGJAHR TYPE.
READ TABLE RESULT INDEX 1.
T_BALANCE_ACCOUNT_HW-WAERS1 = RESULT-WAERS.
T_BALANCE_ACCOUNT_HW-VALUE1 = RESULT-VALUE.
*2. Hauswährung
IF BK_METHODE-CURT2 <> SPACE.
    CLEAR RESULT. REFRESH RESULT.
    CLEAR XGLEDTAB. REFRESH XGLEDTAB.
    TYPE = 'HW2'.
    CURT = BK_METHODE-CURT2.
    IF CURT = '30'.
      XGLEDTAB-RLDNR      = '00'.
      XGLEDTAB-CURRNUMBER = '3'.
    ELSE.
      CALL FUNCTION 'G_GIVE_LEDGERS_FOR_GLT0'
           EXPORTING
                BUKRS = XBUKRS
                CURTP = CURT
           TABLES
                LEDTAB = XGLEDTAB.
      DESCRIBE TABLE XGLEDTAB LINES SY-TFILL.
      IF SY-TFILL GT 1. SORT XGLEDTAB. ENDIF.
      READ TABLE XGLEDTAB INDEX 1.
    ENDIF.
    PERFORM READ_LEDGER TABLES RESULT XGLEDTAB
                                USING XBUKRS XSAKNR XGJAHR TYPE.
    READ TABLE RESULT INDEX 1.
    T_BALANCE_ACCOUNT_HW-WAERS2 = RESULT-WAERS.
    T_BALANCE_ACCOUNT_HW-VALUE2 = RESULT-VALUE.
ENDIF.
IF BK_METHODE-CURT3 <> SPACE.
*3. Hauswährung
    CLEAR RESULT. REFRESH RESULT.
    CLEAR XGLEDTAB. REFRESH XGLEDTAB.
    TYPE = 'HW3'.
    CURT = BK_METHODE-CURT3.
    IF CURT = '30'.
      XGLEDTAB-RLDNR      = '00'.
      XGLEDTAB-CURRNUMBER = '3'.
    ELSE.
      CALL FUNCTION 'G_GIVE_LEDGERS_FOR_GLT0'
           EXPORTING
                BUKRS = XBUKRS
                CURTP = CURT
           TABLES
                LEDTAB = XGLEDTAB.
      DESCRIBE TABLE XGLEDTAB LINES SY-TFILL.
      IF SY-TFILL GT 1. SORT XGLEDTAB. ENDIF.
      READ TABLE XGLEDTAB INDEX 1.
    ENDIF.
    PERFORM READ_LEDGER TABLES RESULT XGLEDTAB
                         USING XBUKRS XSAKNR XGJAHR TYPE.
    READ TABLE RESULT INDEX 1.
    T_BALANCE_ACCOUNT_HW-WAERS3 = RESULT-WAERS.
    T_BALANCE_ACCOUNT_HW-VALUE3 = RESULT-VALUE.
ENDIF.
APPEND T_BALANCE_ACCOUNT_HW.
SORT T_BALANCE_ACCOUNT_TW.
ENDFORM.                               " READ_GLDB_2
*&      Form READ_BSIS_2
FORM READ_BSIS_2 USING BUKRS LIKE BSIS-BUKRS
                       SAKNR LIKE BSIS-HKONT.
CLEAR T_BALANCE_ITEMS_HW. REFRESH T_BALANCE_ITEMS_HW.
CLEAR T_BALANCE_ITEMS_TW. REFRESH T_BALANCE_ITEMS_TW.
SELECT * FROM BSIS
         WHERE BUKRS = BUKRS
         AND    HKONT = SAKNR.
    IF ( BSIS-PSWSL IS INITIAL OR BSIS-PSWBT IS INITIAL ) AND
         BSIS-XARCH NE 'X'.
      SELECT SINGLE * FROM BSEG WHERE BUKRS = BSIS-BUKRS
                                AND   BELNR = BSIS-BELNR
                                AND   GJAHR = BSIS-GJAHR
                                AND   BUZEI = BSIS-BUZEI.
      IF SY-SUBRC <> 0.
        MESSAGE A500(FE) WITH 'BSEG nicht gefunden'.        "#EC NOTEXT
      ENDIF.
      BSIS-PSWSL = BSEG-PSWSL.
      BSIS-PSWBT = BSEG-PSWBT.
    ENDIF.
    IF BSIS-SHKZG = 'S'.
      T_BALANCE_ITEMS_HW-WAERS1 = BK_METHODE-HWAE1.
      T_BALANCE_ITEMS_HW-WAERS2 = BK_METHODE-HWAE2.
      T_BALANCE_ITEMS_HW-WAERS3 = BK_METHODE-HWAE3.
      T_BALANCE_ITEMS_HW-VALUE1 = BSIS-DMBTR.
      T_BALANCE_ITEMS_HW-VALUE2 = BSIS-DMBE2.
      T_BALANCE_ITEMS_HW-VALUE3 = BSIS-DMBE3.
      T_BALANCE_ITEMS_TW-WAERS = BSIS-PSWSL.
      T_BALANCE_ITEMS_TW-VALUE = BSIS-PSWBT.
    ELSE.
      T_BALANCE_ITEMS_HW-WAERS1 = BK_METHODE-HWAE1.
      T_BALANCE_ITEMS_HW-WAERS2 = BK_METHODE-HWAE2.
      T_BALANCE_ITEMS_HW-WAERS3 = BK_METHODE-HWAE3.
      T_BALANCE_ITEMS_HW-VALUE1 = - BSIS-DMBTR.
      T_BALANCE_ITEMS_HW-VALUE2 = - BSIS-DMBE2.
      T_BALANCE_ITEMS_HW-VALUE3 = - BSIS-DMBE3.
      T_BALANCE_ITEMS_TW-WAERS = BSIS-PSWSL.
      T_BALANCE_ITEMS_TW-VALUE = - BSIS-PSWBT.
    ENDIF.
    COLLECT T_BALANCE_ITEMS_HW.
    COLLECT T_BALANCE_ITEMS_TW.
ENDSELECT.
SORT T_BALANCE_ITEMS_TW.
ENDFORM.                               " READ_BSIS_2
*&      Form CHECK_ACCOUNT2
      Check some things for XOPVW
FORM CHECK_ACCOUNT2.
TABLES: TBSL, T030.
DATA: CHECK_BSCHL LIKE BSIS-BSCHL OCCURS 10 WITH HEADER LINE.
Belege schon archiviert?
SELECT * FROM BSIS WHERE BUKRS EQ P_BUKRS
                     AND   HKONT EQ P_SAKNR
                     AND   XARCH EQ 'X'.
    MESSAGE E146.
   Es sind schon Belege archiviert worden. Änderung ist nicht möglich
ENDSELECT.
Vorgangsschlüssel MVA und VVA sind nicht erlaubt.
SELECT * FROM T030 WHERE KTOPL = T001-KTOPL
                      AND ( KTOSL = 'MVA' OR KTOSL = 'VVA' ).
    IF T030-KONTS = P_SAKNR OR T030-KONTH = P_SAKNR.
      MESSAGE E145(FH) WITH P_SAKNR.
   Konto wird in Kontenfindung für Vorgang MVA oder VVA verwendet
    ENDIF.
ENDSELECT.
Buchungsschlüsseln dürfen nicht für KOART = M sein
SELECT BSCHL INTO TABLE CHECK_BSCHL FROM BSIS
                                      WHERE BUKRS EQ P_BUKRS
                                      AND   HKONT EQ P_SAKNR.
SORT CHECK_BSCHL.
DELETE ADJACENT DUPLICATES FROM CHECK_BSCHL.
LOOP AT CHECK_BSCHL.
    SELECT SINGLE KOART INTO TBSL-KOART FROM TBSL
                                        WHERE BSCHL = CHECK_BSCHL.
    IF SY-SUBRC NE 0.
      MESSAGE E143(FH) WITH CHECK_BSCHL.
     Verwendeter Buchungsschlüssel & ist nicht mehr in der Kontenfindu
    ELSEIF TBSL-KOART = 'M'.
      MESSAGE E144(FH) WITH P_SAKNR CHECK_BSCHL.
      Konto & kann nicht geändert werden -> Langtext
    ENDIF.
ENDLOOP.
ENDFORM.                               " CHECK_ACCOUNT2
*>>>> END OF INSERTION - NOTE 66156 <<<<
INCLUDE FSACHCDC.
INCLUDE EPA00F00.
*&      Form READ_CURRENCY_T001A
FORM READ_CURRENCY_T001A USING P_BUKRS LIKE T001-BUKRS.
TABLES: X001.
CALL FUNCTION 'FI_CURRENCY_INFORMATION'
       EXPORTING
            I_BUKRS                = P_BUKRS
       IMPORTING
            E_X001                 = X001
       EXCEPTIONS
            CURRENCY_2_NOT_DEFINED = 1
            CURRENCY_3_NOT_DEFINED = 2
            OTHERS                 = 6.
BK_METHODE-HWAE1 = T001-WAERS.
BK_METHODE-HWAE2 = X001-HWAE2.
BK_METHODE-HWAE3 = X001-HWAE3.
BK_METHODE-CURT1 = '10'.
BK_METHODE-CURT2 = X001-CURT2.
BK_METHODE-CURT3 = X001-CURT3.
ENDFORM.                               " READ_CURRENCY_T001A
*&      Form READ_LEDGER
FORM READ_LEDGER TABLES   RESULT      STRUCTURE T_BALANCE_ACCOUNT_TW
                          XGLEDTAB    STRUCTURE GLEDTAB
                 USING    XBUKRS      LIKE      GLT0-BUKRS
                          XSAKNR      LIKE      GLT0-RACCT
                          XGJAHR      LIKE      GLT0-RYEAR
                          TYPE        TYPE      C.
DATA: BALANCE LIKE GLT0-TSLVT.
DATA:    I_GJAHR     LIKE GLT0-RYEAR.
STATICS: I_RECURSIV TYPE I.
CHECK I_RECURSIV < 2.
CLEAR RESULT. REFRESH RESULT.
READ TABLE XGLEDTAB INDEX 1.
SELECT * FROM GLT0
           WHERE RLDNR = XGLEDTAB-RLDNR
           AND   RRCTY = '0'
           AND   RVERS = '001'
           AND   BUKRS = XBUKRS
           AND   RYEAR = XGJAHR
           AND   RACCT = XSAKNR.
    CASE TYPE.
      WHEN 'TW'.
        RESULT-WAERS = GLT0-RTCUR.
        RESULT-VALUE = GLT0-TSLVT.
        DO GLT0-RPMAX TIMES
           VARYING BALANCE FROM GLT0-TSL01 NEXT GLT0-TSL02.
          RESULT-VALUE = RESULT-VALUE + BALANCE.
        ENDDO.
      WHEN 'HW1'.
        RESULT-WAERS = BK_METHODE-HWAE1.
        RESULT-VALUE = GLT0-HSLVT.
        DO GLT0-RPMAX TIMES
           VARYING BALANCE FROM GLT0-HSL01 NEXT GLT0-HSL02.
          RESULT-VALUE = RESULT-VALUE + BALANCE.
        ENDDO.
      WHEN 'HW2' OR 'HW3'.
        IF XGLEDTAB-CURRNUMBER = '3'.
          GLT0-HSLVT   = GLT0-KSLVT.
          GLT0-HSL01 = GLT0-KSL01. GLT0-HSL02 = GLT0-KSL02.
          GLT0-HSL03 = GLT0-KSL03. GLT0-HSL04 = GLT0-KSL04.
          GLT0-HSL05 = GLT0-KSL05. GLT0-HSL06 = GLT0-KSL06.
          GLT0-HSL07 = GLT0-KSL07. GLT0-HSL08 = GLT0-KSL08.
          GLT0-HSL09 = GLT0-KSL09. GLT0-HSL10 = GLT0-KSL10.
          GLT0-HSL11 = GLT0-KSL11. GLT0-HSL12 = GLT0-KSL12.
          GLT0-HSL13 = GLT0-KSL13. GLT0-HSL14 = GLT0-KSL14.
          GLT0-HSL15 = GLT0-KSL15. GLT0-HSL16 = GLT0-KSL16.
        ENDIF.
        IF TYPE = 'HW2'.
          RESULT-WAERS = BK_METHODE-HWAE2.
        ELSE.
          RESULT-WAERS = BK_METHODE-HWAE3.
        ENDIF.
        RESULT-VALUE = GLT0-HSLVT.
        DO GLT0-RPMAX TIMES
           VARYING BALANCE FROM GLT0-HSL01 NEXT GLT0-HSL02.
          RESULT-VALUE = RESULT-VALUE + BALANCE.
        ENDDO.
    ENDCASE.
    COLLECT RESULT.
ENDSELECT.
IF SY-SUBRC = 0.
    CLEAR I_RECURSIV.
ELSE.
    ADD 1 TO I_RECURSIV.
    I_GJAHR = XGJAHR - 1.
    PERFORM READ_LEDGER TABLES RESULT
                                XGLEDTAB
                        USING   XBUKRS
                                XSAKNR
                                I_GJAHR
                                TYPE.
ENDIF.
ENDFORM.                               " READ_LEDGER
BEGIN OF INSERTION - NOTE 70203
*&      Form BKPF_UPDATE                   P30K137533
FORM BKPF_UPDATE.
*--- Stornovormerkung löschen? -
CLEAR D_STORNO.
SELECT SINGLE * FROM BKPF WHERE BUKRS = T_BSXX-BUKRS
                            AND   GJAHR = T_BSXX-GJAHR
                            AND   BELNR = T_BSXX-BELNR.
IF BKPF-STBLG NE SPACE.
    D_STORNO = 'X'.
ENDIF.
ENDFORM.                               " BKPF_UPDATE
END OF INSERTION - NOTE 70203
If you find solution to your answer donot forget to reward points
Regards

Airport signal is lost multiple times throughout the day

i have a wifi network at my house consisting of my airport extreme router, my dad's PC (which is wired to it) and 2 iMacs. the only problem seems to be with my computer though. while my wifi signal remains strong sometimes i'll lose the ability to be online. safari will stop loading pages and any messenger convo's i have will be cut off due to loss of connection. when i check my network settings it says that i'm receiving a strong signal. the only way i've been able to deal with it is to turn the airport off from my computer and turn it on again. then it runs fine or at least until it decides to stop sending a signal.
any ideas would be greatly appreciated!

Is the computer near a television, DVD player or audio video receiver? Microwave oven? Keep investigating. Interference is hard to pin down.
Download Air Radar. You can use it free for a few weeks. Use the application to display all of the visible networks in your area. It's also possible that there are "hidden" networks in your area. Can't do much about that or the new security system that one of the neighbors installed.
You will see your network and others in the display. Look for the channel that your wireless is on and compare it to the other channels in use. If your network is on the same channel or a close adjacent channel to another network, this can be a source of interference. Post back if you need instructions on how to change your channel. Ideally, you want to be as far away from other channels as possible. If there are "hidden" networks around you, all you can do is try a few different settings to see if that helps.
If you have a desktop or the computer usually stays in the same place, there is nothing better than an ethernet connection. If you can't run the wires to the router, then take a look at a pair of ethernet powerline adapters that use the wiring in your home to transmit an ethernet signal. This will be a faster and more reliable connection than wireless.
Please post back on your findings.

My iphone randomly turns off multiple times throughout the day. What does this mean?

My iphone will turn off anytime I try to use anything on it. This includes checking my email, listening to voicemail messages, using apps. What does this mean and what should I do?

Bring your phone into Apple for evaluation

EBS - Electronic Bank Statement (MT940) - Not to be posted error

Hi
I have done the EBS configuration for MT940 and uploaded the file through FF.5 and the fiel is uploaded and the same is coming in FF.6. Though I defined posting rule properly it is not clearing and no entry is getting posted. When I go to FEBA it is coming with Red Symbol and If I select the item and click on POST it is not posting.
If I checked it in FF67, it is showing as Not to be posted.
Can anybody help me where the mistake is.
Regards
Brahma

I did a config mistake. I corrected it.

Post multiple bank statements on the same day

The processing of electronic bank statements on a daily basis had to stop so that a more critical issue could be fixed. Now that I am two months (April and May) behind and the critical issue has been resolved I would like to catch up with the processing but not post the statement back to the original statement date in April or May since the GL Cash accounts have been reconciled for those previous months. I want to start processing as of June but I receive an error indicating that the "statement already exists; entry ignored". The system is evidently assigning a statement number to a particular date and not allow more than one statement to be processed in a single day. Is there any way to post more that one statement on a single day using tran FF_5 or any other way? I have already tested altering the date within the bai text file.

Since only one bank statement can be processed per day, I had to go back for the two months I was behind and process the files day by day until I got caught up to being current.
If I really needed to process many bank statements simultaneously, I could have created one bank statement manually and add all transactions and bai codes from many days and process that bank statement on a weekend date that would not be used by another statement date.

Error when uploading multiple bank statement in ff_5.

Hi All,
I got below error when trying to upload multiple Electronic bank statement (BAI format) from presentation server on same day.
Acct 4126735166: Statement 00001 already exists; entry ignored.
I understood that there is already an entry in Table febko.
Note: I cannot change any data in the file before uploading.
Please let me know the way to resolve this issue.
Regads,
Dastagir

Hi Pravin,
I cannot delete any records as the uploaded EBS has correct data.
The following scenario will be helpful to understand the issue clearly.
Suppose I uploaded one BAI format EBS for account number 4126735166 on today morning.
On same day evening I received another EBS file from the same bank for the same account number.
So when I tried to upload the second file for the same date, I get the following error.
Acct 4126735166: Statement 00001 already exists; entry ignored.
I understand that SAP Allows to upload only one EBS for a same Account number & same date.
Is there any other option to upload more than one EBS.
Regards,
Dastagir

TR-EBS SwiftMT940 mapping to an IDOC message FINSTA01 - Bank Statements

For Treasury, we are going to move to the PI platform. We are currently using EDI.
We start the process by requesting Citibank(GXS operations team) to put a sample file into the outbound mailbox to let our company pick up. The output of the file will be XML.
We will them map and create an IDOC with the FINSTA message.
However, we are only beginning the IDOC mapping process.
Does anyone have a sample crosswalk which will allow us to see how the SwiftMT940 from Citibank can be mapped to an SAP Idoc?
If so, may we see how you mapped the segments?
Also, how do you test the loading of the IDOC created? with the RFEBKA00 program?
Please advise.

Hello,
I am really not sure how you map to IDOC.
But, the following information may be useful to you.
Hello, You can configure the electronic bank statement at the following path: IMG => Financial Accounting => Bank Accounting => Business Transactions => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement. All the settings will be done at this path only. 1. Create Account Symbols 2. Assign Accounts to Account Symbols 3. Create keys for posting rules 4. Define posting rules 5. Create transaction type Assign external transaction types to posting rules 6. Assign bank accounts to transaction types. There are different programs to upload electronic bank statement. FF.5 or FF_5. I think your case Multicash format you are using. You need have three files in FF.5 and two files in FF_5 You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server. 1. Take all the external codes list from bank. 2. Take any available documentation from the Bank describing the relevance of the external codes. 3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements. 4. Based on this decide the Account Symbols that are required to be created. 5. Make sure that the masking rules are configured properly. 6. Decide the posting rules that needs to be created. 7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic. 6. Concentrate on the posting areas to be posted while uploading the bank statement. Further explanation would help you to understand the functionality when uploaded the electronic bank statement. Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync. You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP. SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be: Vendor Account Dr To Bank Sub Account The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is: Bank Sub Account Dr To Bank Main Account It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts. At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting The entries would system itself pass is: Bank Main Account Dr To Bank Sub Account Bank Sub Account Dr To Cutomer account. Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts. Ideally you will use FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing. GO THROUGH SAP NOTE 48854 Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms. Though this note is in relevant to GB specific, you will find this very useful. description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point. The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case. 1. '00': There is no processing. The entry line is ignored. 2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm. 3. '02': Transfer of the ending balance to the electronic bank statement 4. '03': Transfer of the opening balance to the electronic bank statement 5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm. 6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'. Note To differentiate between the two procedures in table T028G, you have to maintain two separate entries. Example: the bank uses bank code '62' for cash receipts and for BACS bank collection. Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5 62 SAPBACS + GB63 000 5 7. '06': Bank costs or interest revenues Recommended interpretation algorithm: '000 - No interpretation' 8. '07': Total amount of cash disbursements 9. '08': Total amount of cash receipts 10. '09': Items not paid Recommended interpretation algorithm: '000 - No interpretation' Regards, Ravi

Convert manual bank statement to EBS

Hi,
one of our customer Indonesia is currently doing outflow bank statement processing manually, and going forward wants to user electronic bank statement processing.
Now, i have to check what are the config setting done for Manual bank statement and get data and use them for EBS.
i can see the first 4 config steps, create account symbols, assign accounts to symbols, create keys for posting rules and define posting rules are same in both manual banking and EBS. so i dont need to do these 4 config steps in EBS.
how to i get the transacton types?
please share what are the config steps / work i have to carry out in sequence to convert manual bank statement to EBS?
and test the EBS?
Thanks,
Shwetha

Hi,
http://srilogix.com/casesWhitepapers/Electronic%20Bank%20Statement.pdf
To set up Electronic Bank Statements (EBS)
Processing in SAP for most customers in North America.
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
     - Create Account Symbols
     - Assign Accounts to Account Symbols
     - Create Keys for Posting Rules
     - Define Posting Rules
     - Create Transaction Types
     - Assign External Transaction Types to Posting Rules
     - Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
    - Search String Definition
    - Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
regadrs,
Santosh kumar

Hard lock ups multiple times a day - How can I troubleshoot?

My machine locks up hard multiple times a day. If I happen to be sitting in front of it, I observe that the image on the monitors stops changing. Mouse and keyboard will not work at all (including Magic key SysRq sequences). I cannot ping the box from another machine. The system has not made it to 24 hours of uptime for some weeks.
I am beginning to suspect that this may be an issue with the NVIDIA driver, but that's only a guess since it's the only thing I've seen before that can lock up a machine hard like this. I have checked journalctl and the Xorg logs, but don't see anything telling.
What should be my next steps toward solving this issue?

When it locks up, do any indicators on the keyboard blink? That would be an indication of a kernel panic.
If there are no blinking lights, does it unlock eventually?
Has the machine ever been stable?
Have you tried installing a RAM test in your boot loader and running it?
Next, I would start blacklisting any kernel module you don't absolutely need to see if you can isolate it that way.
Also, this looks ominous:
Apr 29 07:49:48 lore kernel: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
I redouble my suggestion you pare down loaded modules to try and isolate this.
Also, I see that it looks at the microcode
Apr 29 07:49:48 lore kernel: microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
But I don't see it being updated. That might be normal for your processor, but double check that and ensure you have the microcode update stuff installed in the boot loader correctly.

Why do I need to reset my Airport Express multiple times a day?

I purchased an Airport Express (AE) in 2008. Ocassionaly since I've owned the device, I've had a problem connecting to it via iPod touch, iPhone, Macbook Pro, Macbook, etc. I would see the AE in my wifi router list, I just couldn't connect to it. I simple reboot always seemed to fix the problem. As time has passed, I found myself having to reboot it more and more often. Within the past few months, it seems to be a daily occurance. Within the past couple weeks, I've had to reboot it multiple times a day. I have also performed a facory reset via the button and via airport utility - neither seem to affect the issue.
I like the AE for the simple fact that it has AirTunes abilities, this is quite frankly the only reason I have it. I would like to replace it, but I fear another unit would have similar issues.
Is anyone else having these same problems on a 2+ year old AirPort Express? if so, is there a fix action? thanks.

Hi, I'm having the same problem and have to reboot my Airport Express at least once a day. It is extremely frustrating.
Firmware is 6.5
Hopefully someone can help us

Receipt of EBS multiple times in a day (Electronic Bank Statement)

Similar Messages

Maybe you are looking for