Receive 10 pics and only forward 2
why can i receive 10 pics and only forward 2 out of the 10
Try doing around 5 at a time. If that doesn't work try sending 1 of the forwarded pics at a time that has not sent. Also do you receive the red exclamation mark next to the message?
Similar Messages
-
How do I find my password to receive sms pic and videos
how do i open a video text
It should be in the text informing you that you had an MMS awaiting you.
-
UTorrent, Internet Sharing and Port Forwarding: Horrid Trifecta
Every good question has a couple of miles of back story, so here it comes:
I bought a Windows PC recently, and one of the first programs I downloaded was uTorrent. I have an iBook G4 running 10.4.8, but I have no wireless router, so I thought I would use internet sharing to get my new laptop off the ground. Everything connects great, internet sharing is wonderful on the web, but then I use uTorrent and notice that I'm uploading at nearly 3 times the speed I'm downloading, even when I only have 12kb of a file. I then notice the small icon at the bottom of the application that looks like a warning flag that my computer is confused, and I figure out that the problem is my new laptop has no ears, or rather, no listening port through which uTorrent can increase the speed of my DOWNloads. Further searching reveals that the traffic on the appropriate port is not getting through, hence I try to figure out how to manipulate internet sharing into forwarding the appropriate port range. I found Brickhouse, or as it is now known, Flying Buttress, but the program is remarkably confusing (to be perfectly honest, I'm not that bright). I cannot get FB to forward the port, no matter how hard I tried (every time I clicked Start IP Sharing, the it wouldn't work). So I can't use FB. I thought I would be clever and create a network on my Windows PC and share it with my iBook, but apparently my iBook refuses to share the Windows internet.
So now I am stuck trying to figure out how to get this Windows PC to receive traffic on TCP/UDP ports 10000-65535 through my Mac. To be honest, I really thought that the Mac would easily be able to forward the ports (is this in store for Leopard?), and I was a little disappointed the whole thing was so frustrating, but then I tried to setup an ad-hoc network on the Windows PC and realized that my Mac is still FAR easier to use, despite is insufficiencies.
So, long story short, I need help forwarding ports through internet sharing. If you can help me use FB, that's great, but to be honest, I would like a cleaner solution if possible. So my question is: How do I get my Mac to share port traffic with Windows if it is running internet sharing?
iBook G4 Mac OS X (10.4.8) Other Computer: Windows XP, other specs available on requestI was hoping more for a permanent solution that doesn't cost $100. Did I mention I'm in China? That program seems great and all, but I have the same technical difficulties I've had with FB. I can get the thing running and still have an internet connection on my machine, however, the port mapping or port forwarding or whatever you wish to call it doesn't actually work. These programs make it very difficult to understand what's going on; I checked the IP Address on my windows machine and used it as the actual address for the port I wanted to forward, I applied the settings and absolutely nothing changed on the windows machine. I went to portforward.com to check if the port was forwarded properly and still no response. This will sound stupid, but when I hook up the windows machine to the router through ethernet, it works perfectly, no forwarding required, so it is essentially my mac that is blocking or absorbing the intended traffic, but if I hook up the windows machine to the router, I have no internet for my Mac (I'm not sure if that's a problem with my Mac or with ICS). Can you explain to me how to use this program to forward ONE port, and ONLY forward one port (or a range of ports would be even better) without all of its inane firewalling that blocks all the internet traffic? Or am I just hopeless on this issue?
-
My 3gs won't take pics. It says it's full and to delete pics/vids, but I only have 30 pics and I've had tripple that plus vids and it took pics fine. How can I get my camera working again?
The number of pictures/videos on the device is irrelevant. If there is not available space on the device, there is no way to take pictures. Pictures, videos, music, iBooks, and any other media share the same space.
Might be a good idea to manage the content on the device going forward so that there is always space available.
Try not to fall into the misconception that many others experience, believing that the iPhone is a storage device, it simply is not. Instead it is intended to be a mirror of the content on the computer. -
Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.
My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there. -
I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem with link in email on my ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem continues.
Have you talked to your carrier (or your friend to his)? Could be an issue at their end.
-
I transferred data from my Macbook Pro to my Mac mini but it forced me to make a new user for my old data. How do I transfer my music, pics, and docs from the "old" user to the new user (so that I only have one user instead of 2?)
Unless you transfer the files from Setup Assistant, Migration Assistant creates a new user with the data.
To transfer the files to your first user, you have to log on this new user, and copy all your files to /Users/Shard folder. This is a folder where you can put the files you want to share between two or more users, and all users can read and write in it.
After copying the files, go to your first user, open /Users/Shared folder, and copy the files to your user folders. If you migrated applications, you must know that they are stored in a common folder (/Applications), so you don't have to transfer them. To open /Users/Shared folder, open Go menu (in the menu bar) > Go to Folder, and type the folder -
If only using wifi, will I still receive text messages and calls from non iPhone users?
If only using wifi (turning off Cellular Data) will I still receive text messages and calls from non iPhone users?
If you have cell service with a text plan, yes.
-
Hello!, I´m new using apple products. I added som pics to My Photo Stream/Uploads on Windows and only appear on Apple TV. I want to see them also in my iPad and iPhone. What I need to do?
Set up the same iCloud account in Settings>iCloud, then turn photo stream to On.
-
In trying to edit my pics only the slide show pics is editing - not the main pic. Trying to crop the pic and the whole main screen goes grey
Please check your Firefox Installation's version. (can be found by clicking the main menu, either clicking or hovering over the help button, and then clicking about firefox in the sub menu). depending on how long ago you set up sync you may still be using the older sync version. firefox 29 introduced a new (and might i add far less tedious) sync version. see [[How to update to the new Firefox Sync|this Mozilla support article]] for information on upgrading your sync to the new version.
-
i signed up for cc a while back and thought i was supposed to receive both ps and lr but i have only been able to use ps. I pay the monthly 9.99 subscription. Does this price level not include Lr?
Sounds a bit odd to me. Like Gene says, if you are signed in to the Desktop Application Manager, it should recognize you and the plan you are on, and let you install LR without asking for a serial number. Try signing out of the Desktop Application Manager by clicking on the cog icon > Preferences > Account tab > sign out. Then sign back in again. This forces the Desktop Application Manager to scan your system (it normally only does so once every 24 hours looking for updates).
If LR is still not inviting you to Install it, then sign in to your Adobe account . See what it says under My Subscriptions. I don't have the Photography plan, so don't know what you should see, but I imagine it will be obvious. Click on Manage and see if that makes sense.
If still in trouble, I think you would do better starting a thread in the Creative Cloud forum that deals specifically with this sort of issue. You'll also find some FAQ links on that page that will likely give you a clue as to what is going on.
Bottom line is I have never been asked for a serial number installing LR from the CC Desktop Application Manager. -
A 6 and a 6 Plus with seperate phone numbers are receiving txts sent to only one number. They share the same iTunes acct. Is this the problem?
Hmm... Just found out the 6 and 6 Plus were updated to 8.1.1 today. Coincidently, that's when this started.
Another thing is both phones ring and you can answer either one, or both. fwding is not selected.
Thanks Kilted Tim. -
Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan
The easiest way is to connect the G5 and your new iMac together via Firewire. Then you can use what is called "Target Disk Mode" which basically makes the G5 look like an external hard drive to your iMac. The potential gotcha is if your new iMac does not have a Firewire port. In that case, you need to get the Apple Thunderbolt-Firewire adapter in order to connect the two machines (as far as I know, all G5's had one or more Firewire ports). I have done this many times, it's easy and works perfectly.
Alternatively, you could connect both Macs to the same network and log into the G5 from your iMac. This involves going into System Preferences > Sharing on the G5 and turning on File Sharing and then logging in from your iMac to the G5 as if it were a server. (Logging in through the Finder or via Go > Connect to Server). This also works fine but it's a little more involved than using Target Disk Mode. I do this all the time and it too works fine.
Either way, once the two Macs are connected, you will use the Finder on your iMac to copy files/folders from your G5 the same as you would from any external hard drive. Regarding iTunes, you could just copy your entire iTunes library over to your iMac being careful to put it in the same relative folder location: /users/yourusername/Music/iTunes This method will preserve your playlists and album art. Alternatively you could go into iTunes and do Add to Library but I'm not completely sure doing it that way will bring over your album art and it certainly won't bring over your playlists.
I see no reason to use a separate external hard drive. It will just double the time it takes to transfer your files because you would first have to copy everything to the hard drive, then in a second step copy everything from the hard drive to your iMac.
Note: In all cases there is the possibility that you may need to change file & folder permissions on the things you copy over so you can access (read & write) to these folders & files once copied to your new iMac. This is not a difficult process. -
My pic display is only showing 2/3 the pic and, after viewing the pic from my PC
My display is only showing about 2/3 the pic and when I upload the memory card to my PC that is what actually is being taken by the camera.
When anything happens you don't know how, reset the camera back to factory defaults. Try again. If the condition remains try the next simplest step. A new SD card and/or reader. A new USB cable or slot in the computer. A new battery. You know the easiest and cheapest.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7
Maybe you are looking for
-
I have a 4GB iPod Nano from 2006 I am trying to use again. I let the anti-virus softwarer lapse on my old PC, the one with my iTunes library on it. Can my iTunes library become affected with this virus? I have tried to fully charge the iPod but th
-
Health Check in Exchange 2007 Scripting
Hi All, I have been looking around for scripts which would help me perform regularised health checks in my enviornment. After lot of googling i was able to get a script which would meet my requirements. However i have a few challenges involved in ext
-
Hi , im a begginer in OSM. i installed the PIP cartridges in my machine and i simply placed an order by using the Sample XML inside the Sales order Sample cartridges. i placed the order with the GoldCSalesOrder10010-V2EBM.xml...... the order taking a
-
''locking as a duplicate - https://support.mozilla.com/en-US/questions/780401 '' When I go to control panel/appearance/taskbar and start menu properties/notification area -----the volume and power options are grayed out. AND I have no power or batter
-
hello everyone I am trying to write a he-man fighting game. I have just started and am pretty new to game devlopment, but thanks to java.sun I found the animation to walk. I used that code and edited for jumping and throwing a basic punch. my problem