Receive and Send XML files

I have a requirement, to receive XML files from a Vendor, process them and send them back an XML file.
What are the different way I can receive the files from the Vendor ?
They do not support File Transfer Protocol and They do not want to access any web-service that we create for them to post the XML's ?
What technology do I use to get the files, I was told we can use HTTP.
Please let me know
Thanks

Timo,
Thanks for your reply, the technology stack we are using is Oracle Middleware,
The process of uploading the documents should be automatic , so I need to give the Vendor an URL, where they can post the XML documents.
If I use a web-service, will that be having any URL for the vendor to post ? and I suppose I have to make that web-service open in the internet. ?

Similar Messages

Send XML File as attachement in Mail Receiver adapter

Hi all,
i have the following scenario. i would like to read an XML file from the file system and send this file as an attachement of a mail to a mail receiver specified in this file.
i would like to fill the payload of the mail with some information from the xml file and in addition i would like to send the complete xml file as an mail attachement.
can anybody tell me, how the mail receiver adater needs to be specified ?
best regards,
martin

Hey,
you can go for dynamic configuration of mail adapter.
In this you need to import a mail structure.
mail details such as to, from, subject and content of the mail are a part of the structure.
In your ID check the Use Mail package and also keep attachments.
Now you can give your details in mapping itself.
whatever you want to map in the content of the mail, map it in the content field.
also your file will behave as an attachment.
refer to this blog.
this is the mail structure. Import it as extenal definitions.
<?xml version="1.0" encoding="utf-8" ?>

<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
    <xs:annotation>
      <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:string" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
        <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
        <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
        <xs:element name="Content" minOccurs="0">
          <xs:annotation>
            <xs:documentation>any type</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="encoding" type="xs:string"/>
    </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
    <xs:annotation>
      <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Server" type="xs:string"/>
        <xs:element name="Format" type="xs:string"/>
        <xs:element name="UseMailPackage" type="xs:boolean"/>
        <xs:element name="Encoding" type="xs:string"/>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
regards,
milan

How to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 using ftp

how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet

Hello
For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
Also, take a look at FTP Browser.vi, which is available at the Example Finder.
To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
Post your current VI if possible.
Regards
Mondoni

Sending xml file from client to servlet

Hi,
I am writing the server component of an applcation, such that it will receive xml files from the clients(standalone application similar to javaSwing stuff but it's coded in C#), and the servlet will have to extract the data from the xml file and update the mySql database. it will also fulfill the client's request for xmlFiles (and extract data from DB, format to xml file and send back to client)
I'm new to implementing the servlet receiving files from clients so would need some help.
I've got 3 questions to ask:
1) How does the servlet receive/returns the xml file from the client as a series of httpPost request/response. Do i send a File or the file's contents as a String to/from the client?
2) Is it also a must to use socket for the file transfers? I have read in other posts about sockets as well as HttpURLConnection but i don't quite understand.
3) When I send a file back to the client(client is standalone application written in C# whereas server is coded in java), what do i specify for the HttpResponse.setContentType() in my servlet? (i'm returning the xml file to client)
Would really appreciate for any help rendered. If you have any useful links, would appreciate them too. Thanks a lot.
Karen

I've got 3 questions to ask:
1) How does the servlet receive/returns the xml file
from the client as a series of httpPost
request/response. Do i send a File or the file's
contents as a String to/from the client?The server will listen on some port for requests. The client has to open a socket to this server to send the file as string to the server.
see http://java.sun.com/docs/books/tutorial/networking/index.html
>
2) Is it also a must to use socket for the file
transfers? I have read in other posts about sockets as
well as HttpURLConnection but i don't quite
understand.You use HttpURLConnection to make a request using the http protocol, instead of opening a socket and then writing the html headers yourself.
3) When I send a file back to the client(client is
standalone application written in C# whereas server is
coded in java), what do i specify for the
HttpResponse.setContentType() in my servlet? (i'm
returning the xml file to client)Its up to your receiving program how to interpret this though, so you probably dont need this.

How to send XML file into XI using sender HTTP adapter

I am using HTTP sender adapter to post the XML file into XI. I tried to form the URL by using the following String query , but I am unable to execute file.
String urlString = "http://<servername:portno>/sap/xi/adapter_plain?namespace=<namespace>&interface=<interface name>&service=<service name>&party=&agency=&scheme=&QOS=BE&sap-user=xiappluser&sap-password=satyam&sap-client=100&sap-language=EN";
How can I execute xml file by using HTTP sender adapter.
Any one with better suggestions, about this idea?
Thanks in advance for all.
Ram Raj

Hi
Just use the following parameter to send xml file using HTTP adapter.
"http://xiserver:8000/sap/xi/adapter_plain?namespace="senderNamespace"&interface=senderinterface&service=sender service";
"&party=sender party"&agency=&scheme=&QOS=BE&sap-user=userid &sap-password=password&sap-client=100&sap-language=D";
with the help of this you are able to point out which interface you would like to use.
And in payload pass the xml.
and thats it
carry on
Cheers
Regards
Piyush

Adobe LiveCycle Designer and send XML

Dear all,
I have developped a PDF with Adobe LiveCycle Designer that send an XML file to BW using a button Submit. But this PDF works when executed from the Adobe LiveCycle Designer software (tabpstrip PDF preview) but does not work when it is executed standalone (no logon asked.. )
Do you have some ideas to solve this problem ?
Regards,
Vince

Hi Nitesh,
I have installed ADL standalone on my pc.
When I execute my PDF from ADL it works : I click on a button and a logon screen on a SAP system is shown (like access on web report), I fill it and the XML file is sent and shown through RSA3 transaction.
But when I launch the PDF alone, I get an error message when I clik on the same button : 'HTTP 401 - Unauthorized'.
Do you have another clue ?
Regards,
Vince

How to send XML file to https server using POST

Hi, I am having an requirement, that I have to connect to https server and I have to pass an input XML file as a response server will give me output XML file.
The certificate validation part is over, I am using FileInputStream to read the XML file and attaching this to connection.getOutputStream(); but server is throwing me DTD does n't match.
Can any body tell me how to send XML file, I have to use any DOM parser to send the XML file, suggest me and give me sample code.
Thanks,

Can anybody give me the solution

Receiving a inbound xml file in Business Connector

Hi All,
The requirement is we are receiving an inbound xml file at the BC end from a third party application.
We have configured the url in the third party end as follows -
http://ip address of BC:port address/invoke/Folder/Service
When the file is posted, the xml file is normally routed to the service in the developer.
In the developer we are using the service load document to load the file from the url location.
But at present when a xml file is triggered from the third party application it is routed to the service, and on checking the url location http://ip address of BC:port address/invoke/Folder/Service the server slows down slowly and we are not able to access both the developer and administrator after this.
Are we following the correct steps, or else is there anyother way of receiving the inbound file in BC.
Any suggestions on this would be of great help.
Please let me know if we are going wrong anywhere.
Regards,
Priya

Hi priye,
I am agreed with you approach, and this is what everyone do. :). So that is not a problem. May be something else will be the cause.
>>>>In the developer we are using the service load document to load the file from the url location
For load document, i don't think its necessary because using the URL post, you are submitting data directly to the Flow Service. So no need to do document load or anything. Also i am against to use the Save data in pipeline (savePipeline) service because when you transport this in production you need to comment this step otherwise it will give other problems when this will run.
if this approach is giving you performance problem, then try putting your xml file in you package directory and the write a file pooler and then parse this xml for ur use. this is one of the simple solutions.
hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

How to send XML files through Business Connector to client URL

Dear ALL
I am new to SAP BC. We have setup BC 4.8 and would like to send out a XML file from BC to Client URL. Could someone please guide me.
Please suggest solutions.
Thanks
Ahmed

Hello Mickael
Thanks for your reply. No, we do not have PI. This BC will be used for point to point communication with client.
Scenario:
R/3 server to send XML files to BC. BC will load these files ( using pub.getfile service), this file is to be parsed using pub.loaddocument service and then sent to client in XML format wrapped with digital signature. As i am new to BC i am unable to parse this file and wrap it with the digital signaature to send it.
Kindly advise on how best can we perform this action.
Thanks
Ahmed

How to receive and send V/A signal in one host?

The sample code VideoTransmit.java,sames only can send the V/A signal over network,but the sending host cannot receive the signal.
I hope receive and send signal in one host,what should I do?
s.

Now,the problem is ,how to send and save the live stream in one host?I hope save the stream to a media file,like *.dat,etc.
Of course,the host user can receive the stream sending by himself.
s.

Sending XML Files with Certificate

Hello everybody.
I need develop an abap program for sending XML files with a certificate.
How I can create this certificate?
Somebody have an idea?
Thank you everybody.
Nelson

Mikael,
This sounds like one of the many quirks (perhaps bugs) related to how FrameMaker handles non-FM files in books. The current book model doesn't play well with XML files as chapters and this seems like yet another problem. Apparently, if an xref does not target another .fm file in the book, Frame assumes that the target file is not in the book and therefore will not be in the book PDF.
There have been discussions here about this in the past. The solution that I use is to run an API client before publishing that converts all XML files to .fm files, and redirect all xrefs appropriately. Then, book features work as expected and PDFs come out as normal. This is not feasible, however, without the automation from the API client.
There may be some who would say that the best approach is to use XML and books the way that the designers did account for... that is, the whole book becomes an XML document with entity references to the separate chapters. In my work, though, this model was not appropriate... rather, I needed a binary FM book to act like a book, except with XML files as chapters. So, I think I understand your situation.
Is API programming or FrameScript an option for you? I think it may be the only way to get what you are looking for.
Russ

Weird: receiving and sending old emails

I am both receiving and sending old emails - from about a month ago.
Emails that I've previously received are turning up again in my inbox. They are flagged as newly received, but the send date is from about 6 weeks ago. No message appears more than once and they are appearing in the order they were originally sent.
In addition, my contacts are receiving emails from me again, also sent from that same period, about 6 weeks previously.
There's another thing. Often, an email will appear in the Outbox from nowhere. This can be either an email I previously sent, or an email I've previously received. When I delete it, it goes to trash. However, when I go to inbox, or another folder, then BACK to Outbox, another email will appear in its place.
Weird, huh?
I've talked at length with my ISP about this and they've had me rebuild my account, only for the problem to persist.
Any advice would be greatly appreciated. Many thanks!

Some if not all the problems you’ve described are caused by some index corruption (which in turn might be caused by some filesystem corruption) that makes messages to randomly appear in a mailbox different from where they’re supposed to be. If that mailbox happens to be Outbox, Mail thinks the messages are waiting to be sent and dutifully proceeds to try to send them.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Move any “IMAP-”, “Mac-”, or “Exchange-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all the mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

Mine is Yahoo where POP is used .TB is IMAP . i can receive and send mails , but when making action on TB (Del or send) no reflection on main server

Hello there,
My e-mail is Yahoo, and Yahoo by default is POP user .
I understood from your help file that synchronization is compatible only with IMAP mail provider
I can receive and send mails from TB , but when making action on TB (Del or send) no reflection on main server, same when make the action on the main server (Del or send), no change on TB
from yahoo help I managed to find configuration for IMAP , but could not apply them on TB , as TB have already Yahoo as POP in the configuration list
please your help on this
best regards
Mohamad

You cannot convert an existing account, but you can set up your Yahoo account as IMAP in parallel to the existing POP account. See
http://kb.mozillazine.org/Convert_a_POP_account_to_a_IMAP_account

How to send xml file from local folder to azure storage

Hi,
My plan is i have xml files which are under folders in my local.
I want to use mobile service to send xml files to azure storage,
how shall i do that, either by c# or mobile service.
If internet stop, I will use my mobile service to transfer all xml files to azure storage and run web job to do to update azure
sql by xml file.
please advice.
Superman

Hi,
You could refer the following link for assistance with uploading image files to Azure Blob Storage using Mobile Services:
http://azure.microsoft.com/en-us/documentation/articles/mobile-services-windows-phone-upload-data-blob-storage/
And for image files you could refer the following link:
http://stackoverflow.com/questions/25977406/upload-a-text-file-with-azure-mobile-services
Regards,
Malar.

Application or Front end to send XML file to Webservice in 7.0

Hi,
Can anyone send me sample code how to send XML file to Webservice datasource,I have tested it through Navigator and it works fine.
Kindly send me the sample code how to pass XML data.
Thanks,
Arvind M

Hi Arvind,
Please check out below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1530ab90-0201-0010-6791-f31512d75e6a
Hope its Helps u.
Thanks
SRS

Receive and Send XML files

Similar Messages

Maybe you are looking for