Receive another item or alternate item when doing Receive from Production

Hi ,
Is there any way to receive another item or alternate item when doing Receive from Production in Production Module.
The scenario is that . . at production the return item may differ from the original item planned.
Thanks
Ashish Ranjan

Dear , i want to say that, i will receive the Item from Receive from Prod Form which is planned . . !
Then
I will Issue the Same Item using Goods Issue using a transit Account
Then
will receive the desired item using Goods Receipt using that particular transit Account
Now please suggest is it ok or not !
Regards
-Ashish

Similar Messages

OSB: When does invokation from http Business Service result into an error

Hi,
I want to know when does invokation from http Business Service in OSB result into an error.
I have a http based business service which is calling an external service on http url.
I want to know when this business service is invoke/tested, what are the cases in which the invokation will result into an error.
What does OSB read to cause the invokation an error.
I am aware that it reads the http-response-code. If its not 200 or 0, it will result into an error.
Want to validate this understanding and also want to know what are the other case that will cause this happen. Is it by any way dependent on body content?
Please help. Please share any good links for the topics related to this.
TIA.
Regards,
Ashish

Hi,
Some info here...
http://svgonugu.wordpress.com/2011/06/15/fault-handling-in-osb/
Cheers,
Vlad

Error when doing GR for production order with serial number

I'm not familiar with serial number and equipment management but I'm trying to help my user resolve this issue.
This product is returned from customer site.
I saw that this material is being reset in IQ02 from status in warehouse to become Available when the material is consumed in the production order via 261 movement type. So now the status is available. Then the user went to change a new serial number. Later, GR for production order is done in MB31. Errors are encountered when prompted to enter the new serial number.
Configurations XX01 and XX02 are different
Message no. CX126
Configuration of serial number SN02 incompatible with document item
Message no. IO226

Hi..
Can you please explain in detail, I facing same problem, while assigning unrestricted stock to sales order.
Regards,
Sumit Pukale

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

How to add one item when another item get added into the iProcurement Cart

Hi,
Please help me to do the following customization in iProcurement Cart:
Requirement-1:
1. Login to iProcurement and add one Item ITEM1 to Cart.
2. Make another Item ITEM2 mandatory or get added automatically when Item ITEM1 gets added into the iProcurement Cart
OR
Requirement-2:
1. Login to iProcurement and add one Item ITEM1 to Cart.
2. Go to Cart and click Checkout.
3. While checking out Item ITEM1, we need some validation to make another Item ITEM2 mandatory or get added automatically with Item ITEM1.
Thanks in Advance,
SB

Hi tiff512:
The way is:
SAP NetWeaver > General Settings > Check Units of Measurement.
The help documentation says the following in relation to the creation of new units of measure:
"If required, define new units of measurement according to the international system of units (SI) with the menu function Unit of meaurement -> Create.
Here you have to make make specifications for:
Display (including a descriptive Units of measurement text)
Conversion (not applicable to units of measurement without dimensions)
Data exchange (EDI) (optional)
Application parameters"
I hope it is helpful to you.
Regards,
David

When does a promotion/pricingmodel gets applied to an Item

Hi,
I have a question when does a pricingmodel/adjustment get added to an Item/Product/Sku.
I have a configurableSubSku item added to cart, and for the same sku i have added a promotion say like 50% off. But it doesn't gets triggered at all.
So I wanted to know where does the item discounts happen in ootb. Incase if i want to customize it add the promotion to the sub skus how should i do it.
Thanks.

In response to below question:
I have a question when does a pricingmodel/adjustment get added to an Item/Product/Sku
Pricing Engine Service is responsible for pricing in ATG.
All global promotions gets loaded periodically by Pricing Engine Service.
When Order is modified(item added, quantity changed, etc) or RepriceOrderDroplet is called.PriceEngineService Comes in picture.
Pricing Engine Service calls individual Engines(ItemPricingEngine, OrderPricingEngine,ShippingPricingEngine, TaxPrcingEngine).
Individual Engines perform following tasks
load individual level promotion
determine right pricing method
invoke precalculator
Call qualifier
Apply discounts
I have never worked on configurable sku, second answer wait for some other reply.
Thanks,
Nitin.

I have 139 items in my Trash, When I click on secure empty trash to erase them it wants to erase 1309 items. Does anyone know what may be going on?

I have 139 items in my Trash, When I click on secure empty trash to erase them it wants to erase 1309 items. Does anyone know what may be going on?

If your erasing packages or programs, they appear like a file, but are actually folders with more files and folders inside.
For instance right click on your Pictures/iPhoto Library and "show package contents" inside is more files and folders of files.

I downloaded iTunes 11.1 and when I went to open iTunes after the download, all of my music, podcasts, playlists, etc were missing. The only thing in my iTunes now is my purchased items. Does anyone know how to get my content back in my iTunes?

I downloaded iTunes 11.1 and when I went to open iTunes after the download, all of my content (music, playlists, podcasts, etc.) was missing. The only thing there is my purchased items. Does anyone know how I can get my content back in my iTunes?

See Empty/corrupt library after upgrade/crash.
tt2

Splitter Problem - ALV Grid not refreshed when selected another item

Hi Experts!!
I have a container on screen 100 which has to be split into 3 areas. Left area ->tree, Right top area -alv grid and bottom also alv grid. I created the program without splitter and it was working fine. After I added this splitter, I see that in ALV grid, the data is not being refreshed. When double clicked on an item in tree struct, ALV grid (CL_SALV_TABLE) to be shown.. Firstly it's fine but when I double click on another item, it's not refreshing the data but is showing the same previous data.
I have searched existing posts and implemented, but no luck.
PFB my code:
* In PBO of screen 100
CREATE OBJECT go_cc_area1
    EXPORTING
      container_name              = 'CC_AREA1'
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
    MESSAGE e025 WITH sy-subrc.
ENDIF.
CREATE OBJECT go_splitter
    EXPORTING
      parent        = go_cc_area1
      orientation   = 1              "Vertical split
      sash_position = 40
    EXCEPTIONS
      OTHERS        = 1.
IF sy-subrc <> 0.
ENDIF.
go_container_tree = go_splitter->top_left_container.
go_container_2 = go_splitter->bottom_right_container.
CREATE OBJECT go_splitter_2
    EXPORTING
      parent        = go_container_2
      orientation   = 0              "Horizontal split
      sash_position = 40
    EXCEPTIONS
      OTHERS        = 1.
IF sy-subrc <> 0.
ENDIF.
go_cc_area2 = go_splitter_2->top_left_container.
go_cc_area3 = go_splitter_2->bottom_right_container.
CREATE OBJECT go_tree
    EXPORTING
      i_parent                    = go_container_tree
      i_node_selection_mode       = cl_gui_column_tree=>node_sel_mode_single
      i_item_selection            = gc_x
      i_no_html_header            = gc_x
      i_no_toolbar                = space
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      illegal_node_selection_mode = 5
      failed                      = 6
      illegal_column_name         = 7.
    CALL METHOD go_tree->set_table_for_first_display
      EXPORTING
        i_background_id = space
        is_layout       = gs_layout
      CHANGING
        it_sort         = gt_sort
        it_outtab       = gt_tree_output
        it_fieldcatalog = gt_fieldcat_tree.
    CALL METHOD go_tree->expand_tree
      EXPORTING
        i_level = 2.
* End - PBO 100
*       CLASS lcl_tree_event_receiver DEFINITION
CLASS lcl_tree_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS: handle_item_double_click
               FOR EVENT item_double_click OF cl_gui_alv_tree_simple
               IMPORTING fieldname
                         index_outtab
                         grouplevel.
ENDCLASS.                    "lcl_tree_event_receiver DEFINITION
*       CLASS lcl_tree_event_receiver IMPLEMENTATION
CLASS lcl_tree_event_receiver IMPLEMENTATION.
METHOD handle_item_double_click.
      IF go_alv_area2 IS BOUND.
        go_alv_area2->refresh( ).
      ENDIF.
      cl_salv_table=>factory(
        EXPORTING
          list_display   = space
          r_container    = go_cc_area2
        IMPORTING
          r_salv_table = go_alv_area2
        CHANGING
          t_table      = gt_table ).
      go_alv_area2->display( ).
ENDMETHOD.                    "handle_item_double_click
ENDCLASS.                    "lcl_tree_event_receiver IMPLEMENTATION
I am facing the same problem with area 3 as well. Can somebody please help me out.
Thanks a lot!!
Edited by: Srinivas Kalluri on Jan 28, 2012 1:39 PM

Hi All,
I am still facing this problem. Can somebody please help me out?
I created a test program wth sflight and spfli tables. Can somebody look into this and tell me where I am going wrong?
On screen 100 i have one cust container named CC.
When I test it, it's showing the same refresh problem. But in this test program refresh is atleast happening once.
REPORT ztest.
PARAMETERS: p_carrid TYPE sflight-carrid.
CLASS lcl_tree_event_receiver DEFINITION DEFERRED.
CONSTANTS: gc_x VALUE 'X'.
DATA: go_cc_area1 TYPE REF TO cl_gui_custom_container,
      go_tree TYPE REF TO cl_gui_alv_tree_simple,
      go_tree_event_receiver TYPE REF TO lcl_tree_event_receiver,
      go_cc_area2 TYPE REF TO cl_gui_container,
      go_alv_area2 TYPE REF TO cl_salv_table,
      go_cc_area3 TYPE REF TO cl_gui_container,
      go_columns TYPE REF TO cl_salv_columns_table,
      go_cc_editor TYPE REF TO cl_gui_custom_container,
      go_editor TYPE REF TO cl_gui_textedit,
      go_content TYPE REF TO cl_salv_form_element,
      go_container_tree TYPE REF TO cl_gui_container,
      go_container_2 TYPE REF TO cl_gui_container,
      go_splitter TYPE REF TO cl_gui_easy_splitter_container,
      go_splitter_2 TYPE REF TO cl_gui_easy_splitter_container,
      go_cc_comp TYPE REF TO cl_gui_custom_container,
      go_alv_comp TYPE REF TO cl_salv_table.
DATA: gt_sflight TYPE TABLE OF sflight,
      gt_data TYPE TABLE OF spfli,
      gt_fieldcat TYPE lvc_t_fcat,
      gt_sort TYPE lvc_t_sort,
      gs_sflight TYPE sflight,
      gs_layout TYPE lvc_s_layo.
*       CLASS lcl_tree_event_receiver DEFINITION
CLASS lcl_tree_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS: handle_item_double_click
               FOR EVENT item_double_click OF cl_gui_alv_tree_simple
               IMPORTING fieldname
                         index_outtab
                         grouplevel.
ENDCLASS.                    "lcl_tree_event_receiver DEFINITION
*       CLASS lcl_tree_event_receiver IMPLEMENTATION
CLASS lcl_tree_event_receiver IMPLEMENTATION.
METHOD handle_item_double_click.
    READ TABLE gt_sflight INTO gs_sflight INDEX index_outtab.
    IF sy-subrc EQ 0.
      SELECT * FROM spfli INTO TABLE gt_data WHERE connid = gs_sflight-connid.
      IF go_alv_area2 IS BOUND.
        go_alv_area2->refresh( ).
        cl_gui_cfw=>flush( ).
      ENDIF.
      cl_salv_table=>factory(
        EXPORTING
          r_container    = go_cc_area2
        IMPORTING
          r_salv_table = go_alv_area2
        CHANGING
          t_table      = gt_data ).
      go_alv_area2->display( ).
    ENDIF.
ENDMETHOD.                    "handle_item_double_click
ENDCLASS.                    "lcl_tree_event_receiver IMPLEMENTATION
START-OF-SELECTION.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
* SET TITLEBAR 'xxx'.
CREATE OBJECT go_cc_area1
    EXPORTING
      container_name              = 'CC'
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
*    MESSAGE e025 WITH sy-subrc text-e01.
ENDIF.
CREATE OBJECT go_splitter
    EXPORTING
      parent            = go_cc_area1
      orientation       = 1              "Vertical split
      sash_position     = 25
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
*    MESSAGE e025 WITH sy-subrc text-e02.
ENDIF.
go_container_tree = go_splitter->top_left_container.
go_container_2 = go_splitter->bottom_right_container.
CREATE OBJECT go_splitter_2
    EXPORTING
      parent            = go_container_2
      orientation       = 0              "Horizontal split
      sash_position     = 40
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
*    MESSAGE e025 WITH sy-subrc text-e02.
ENDIF.
go_cc_area2 = go_splitter_2->top_left_container.
CREATE OBJECT go_tree
    EXPORTING
      i_parent                    = go_container_tree
      i_node_selection_mode       = cl_gui_column_tree=>node_sel_mode_single
      i_item_selection            = gc_x
      i_no_html_header            = gc_x
      i_no_toolbar                = space
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      illegal_node_selection_mode = 5
      failed                      = 6
      illegal_column_name         = 7.
IF sy-subrc <> 0.
*    MESSAGE e025 WITH sy-subrc text-e03.
ENDIF.
SELECT * FROM sflight INTO TABLE gt_sflight WHERE carrid EQ p_carrid.
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
      EXPORTING
        i_structure_name       = 'SFLIGHT'
        i_bypassing_buffer     = gc_x
      CHANGING
        ct_fieldcat            = gt_fieldcat
      EXCEPTIONS
        inconsistent_interface = 1
        program_error          = 2
        OTHERS                 = 3.
    IF sy-subrc <> 0.
*      MESSAGE e025 WITH sy-subrc text-e05.
    ENDIF.
    DATA: ls_fieldcatalog TYPE lvc_s_fcat.
    LOOP AT gt_fieldcat INTO ls_fieldcatalog.
      ls_fieldcatalog-col_opt = gc_x.
      CASE ls_fieldcatalog-fieldname.
        WHEN 'CARRID'.
          ls_fieldcatalog-no_out = gc_x.
        WHEN 'CONNID'.
          ls_fieldcatalog-no_out = gc_x.
      ENDCASE.
      MODIFY gt_fieldcat FROM ls_fieldcatalog.
      CLEAR ls_fieldcatalog.
    ENDLOOP.
    DATA: ls_sort TYPE lvc_s_sort.
    ls_sort-spos = 1.
    ls_sort-fieldname = 'CARRID'.
    ls_sort-up = gc_x.
    APPEND ls_sort TO gt_sort.
    ls_sort-spos = 2.
    ls_sort-fieldname = 'CONNID'.
    ls_sort-up = gc_x.
    APPEND ls_sort TO gt_sort.
    DATA: lt_events TYPE cntl_simple_events,
          lo_l_event TYPE cntl_simple_event.
    lo_l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
    APPEND lo_l_event TO lt_events.
    lo_l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
    APPEND lo_l_event TO lt_events.
    lo_l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
    APPEND lo_l_event TO lt_events.
    lo_l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
    APPEND lo_l_event TO lt_events.
    lo_l_event-eventid = cl_gui_column_tree=>eventid_item_double_click.
    APPEND lo_l_event TO lt_events.
    lo_l_event-eventid = cl_gui_column_tree=>eventid_button_click.
    APPEND lo_l_event TO lt_events.
    lo_l_event-eventid = cl_gui_column_tree=>eventid_node_double_click.
    APPEND lo_l_event TO lt_events.
    CALL METHOD go_tree->set_registered_events
      EXPORTING
        events                    = lt_events
      EXCEPTIONS
        cntl_error                = 1
        cntl_system_error         = 2
        illegal_event_combination = 3.
* Set Handler
    CREATE OBJECT go_tree_event_receiver.
    SET HANDLER go_tree_event_receiver->handle_item_double_click FOR go_tree.
    CALL METHOD go_tree->set_table_for_first_display
      EXPORTING
        i_background_id = space
        is_layout       = gs_layout
      CHANGING
        it_sort         = gt_sort
        it_outtab       = gt_sflight
        it_fieldcatalog = gt_fieldcat.
    CALL METHOD go_tree->expand_tree
      EXPORTING
        i_level = 2.
    IF NOT gt_sflight[] IS INITIAL.
      CALL METHOD go_tree->set_top_node
        EXPORTING
          i_index_outtab = 0.
    ENDIF.
* Send data to frontend.
    CALL METHOD go_tree->frontend_update.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      SET SCREEN 0.
      LEAVE SCREEN.
    WHEN OTHERS.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Edited by: Srinivas Kalluri on Jan 31, 2012 4:49 PM

When syncing phone or ipad to mac, I keep getting "cannot sync unknown error occurred (-50) 1726 items What does this mean? What do I do?

when syncing iphone or ipad to imac, I keep getting "cannot sync unknown error occurred (-50) 1726 items " What does this mean? What do I do?

Hello, a couple of old possible fixes...
http://www.edtechhacks.com/2007/12/solved-itunesiphoto-sync-error-50.html
http://reviews.cnet.com/8301-13727_7-10435935-263.html

How to close Item while doing GR

Dear Sir
i would like to close PO item when i do Goods Receive
Example PO Qty = 5000 ea
and GR = 3000 ea only, then i want to close this item during Goods Receive
so, when i do GR for the rest 2000 ea, system will not allow because this item is already closed
How to do ?
Annop ch

Hi Annop,
Unfortunately, this is not possible during the goods receipt.
At the time of posting the goods receipt, the only option we have is to set the "delivery completed" indicator, but this does not stop the system from avoiding the posting of further goods receipts for the Purchase Order quantity that remains opened.
Setting the 'delivery completed' indicator has the following effects:
.- The purchase order item is considered as completed and can be deleted even if not the entire quantity was delivered.
.- A further delivery is not expected. This affects material requirements planning (materials planning) and purchase order commitment.
.- However, another delivery up to the purchase order quantity (including overdelivery tolerance) is still possible.
.- During the next goods receipt, the system does not select the item as a proposal in the selection list in Transaction MB01. In Transaction MIGO, the system does not propose the 'OK' indicator even if it would normally be proposed due to the user settings.
To stop the system from proposing a quantity in Transactions MB01 or MIGO and to prevent a GR posting, you can proceed as follows:
.- Reduce the purchase order quantity to the previous GR quantity.
.- Block the purchase order item. (ME22N: Block pushbutton; ME22 Menu -> Edit -> Block).
.- Fill the date field for the 'Latest Possible Goods Receipt' (LEWED) in the purchase order item. If you do this and you enter a GR document after this date, the system issues message M7163, which you must set as an error message in Customizing.
I hope this helps,
Esther.

Any existing function to validate an item when other item has been changed?

Any existing function to validate an item when another item has been changed? Because these 2 fields are related. When one filed is changed, the other one should be blank and let the user to input again. I am using oracle custom.pll library.
Any ideas?
Amy

Hi Vikram,
Thanks for posting your issue,
You can switch of alerts and set E-Mail Notification to Yes under your Workflow Tasks list > Settings > Advanced Settings. By doing so user specified in AssignedTo will receive e-mail notification when task is created and if task ownership is not changed
during your workflow this will be the only mail sent by system.
Since you are already using SharePoint designer you also have option to include Send an Email action in your workflow (after task is created). This option is better if you want to send some specific info to user.
Also, browse the below mentioned URLs to create workflow step by step
http://sharepointsolutions.com/sharepoint-help/blog/2010/03/create-a-detailed-custom-task-notification-with-a-sharepoint-designer-workflow/
http://sharepoint-community.net/forum/topics/configure-email-notification-for-discussion-board-activity
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

You cannot.
You cannot use another countrys itunes store.
You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
The owners of the distribution rights of movies/music/etc differ by country. These distributors decide who can sell their content in that country.
Buy from another source if your countrys itunes store does not carry somehting that you want.

Change item Label based on Another item's value

Hi guys,
I need to set an item label (A) based on the value of another item (B). I did the following:
I Created a dynamic action.
When B changes:
1- submit the value of B
2- Refresh item A
The label of the item A is : myitem &B.
Any ideas ????
Best Regards,
Fateh

Fateh wrote:
Ok... Thanks a lot... but before closing the thread and for better understanding.
I put this code on Execute when Page Loads:
$("#P1_A").change(function(){
if($v(this)=="Rent"){
$('#mylabel > label > span').text('Is it for Sale also');
}else{
$('#mylabel > label > span').text('Is it for Rent also');
}However, the label does not change. Any ideas why this is not working????
Regards,
Fateh
$v(this)
you are mixing jquery and apex API, it won't work
and missing *});* at the end, and when adding to the page load you should wrap them in $(document).ready( code here.... });
$(document).ready(function () {
     $("#P1_A").change(function () {
          if ($(this).val() == "Rent") {
               $('#mylabel > label > span').text('Is it for Sale also');
          } else {
               $('#mylabel > label > span').text('Is it for Rent also');
});

You can't copy "iTunes" because it has the same name as another item

I did not have enough space on my old MacBook to hold my iTunes library, so purchased a passport HD to hold my music. I now have an imac and am trying to copy my itunes library from the drive onto my iMac. But when i try to copy i get this message:
"You can’t copy “Tyler iTunes” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames."
I tried deleting all files on the computer with the word iTunes, but it keeps happening. I saw on some other threads something about the drives' formatting, so just for reference my passport is formatted "Case-sensitive, journaled" and my iMac is "journaled"
I'm pretty good with computers and this just has me stumped. Its doing this on my fathers macbook pro purchased at the same time, so two new computers with the same problem, two different hard drives for each library. Same message. I'm baffled.

I now have an imac and am trying to copy my iTunes library
What exactly are you trying to copy?
There is no folder named "iTunes library".
I tried deleting all files on the computer with the word iTunes
Search for "Tyler iTunes", the same as the folder you are trying to copy.
post over here -> Forum : Using Mac OS X 10.6 Snow Leopard since it is not an iTunes issue.

Receive another item or alternate item when doing Receive from Production

Similar Messages

Maybe you are looking for