Receive Connectors not working correctly - using random connectors.

I'm having a problem that I thought was DNS related, but I've since flushed the DNS.
What happens is when I try to relay off a Hub server, it always tries to use any random Receive connector, even though my client is explicitly in the Relay connector list.
When I telnet to the HT by hostname on 25, it opens a random receive connector. If I continue to /flush and telnet over and over, it cycles through all the connectors (default, Relay explicit and the others that block the connection).
When I telnet directly to the IP of the Relay connector, it works perfectly.
What would cause the server or client to not use the correct explicit connector all the time?

When you test this - I'm assuming you are coming in from a specific remote IP. What RC should this be hitting?
To troubleshoot this I like to change the banner on all of them so it says "Helo - Connector 1" "Helo - Connector" or something else meaningful like this.
Also enable verbose SMTP send receive logging on all receive connectors. What's in there?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

Themes like Topaz are not working correctly using IE7 or IE8?

We are in the middle of an upgrade from APEX 3.1.2 to 4.0.2 and with this upgrade we also want to change the themes the apllications are using. In this case we are switching from 'Sand' to 'Topaz', but we encounter a problem with Standard Reports Regions. If you have a column with a setting 'Display as Text (based on LOV, does not save state) and the column has no value (null), the table cell is not drawn correctly on the screen. The cell borders (top and bottom) are not drawn, resulting in interrupted lines on the table rows. The same problem occurs if you have a column that contains a link, but the column value is empty.
When we use another browser (e.g. Google Chrome) the reports region is displayed correctly. However the standard browsers at our company are IE7 and IE8.
Sort of a workaround is to display a null value as or - , but for columns that contain links, that is a problem, because it will result in a clickable link on an 'empty' column value.
We tried other themes like Modern Blue, Simple Red, Builder Blue, Sunrise, etc. but they all have the same problem. Is there a workaround for this problem, because we reallty want to use the new Themes and using another browser is no option?
For an example, check problems in MGR and DEPT columns:
http://apex.oracle.com/pls/apex/f?p=9662
Thanks,
Patrick
Edited by: PatrickC on Feb 24, 2011 11:12 AM

Appears to be due to empty-cellsIE's lack of/buggy support for the <tt>empty-cells</tt> property used in the report CSS.
I think you'll have to work round this by including some content in the cells using <tt>nvl</tt> etc in the query or the report Show Null Values as property. To avoid the problem you mentioned relating to clickable "empty" links, try using the zero-width space character entity<tt>&#8203;</tt> zero-width space character entity for this content. It should be effectively invisible.

Uploaded Bootstrap based site onto BC and not working correctly using IE8

Having a problem with a Bootstrap based site that I've uploaded to a BC test site. Seems OK when viewed by everything except IE8. I have all the usual IE8 workarounds in and these work correctly on my usual external server and local host but not on BC test site . Will this resolve itself when the site goes live ?

Version 2 is fine to work with, it's a well designed structure. Version 3 uses some new CSS (some style name changes and new styles replacing others). The IE8 issue could be related to a new base styles. Before you do anything check/compare the paths or the CSS and JS between versions.
Maybe test Bootstrap 3 without any javascript, and just a very basic layout of a header, a few columns and a footer. If the IE8 issue persists, try removing CSS style tags until it breaks or resolves. Of course it may break first, so create a custom CSS file and copy the styles you want to test into that, then you can look at editing the custom copy until it resolves or breaks (don't edit the original Bootstrap CSS file as you custom CSS can override it providing you place it in the page header after the main CSS). There's a good chance you'll find the problem.
Also see:
http://getbootstrap.com/getting-started/#migration
Message was edited by: Simon Darby

IWeb 09 links not working correctly using IE8

Hello all, I built a website within using iweb 09 and hosted it on Godaddy. The problem that i have has to do with my hyper links directing me to the Home page. this seems to only happen when I use IE8. If I use Safari all of the hyperlinks seem to work correctly. I have provided a link to the website below. Any suggestions would be appreciated.
http://goodiescatering.net
Thanks
\David A

Welcome to the Apple Discussions. You're referring to the Home links at the bottom of each page? Are you using the Inspector/Hyperlink Link to on of my pages option in iWeb? If so try using Link to an External Page and enter the full URL to the Home page. That.s often more reliable.
Unique Way to Maintain a Site from Multiple Computers

HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. Any clues?

I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?

Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

HT201320 I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

Well, this is a recurring issue for many users...a small percentage of users but still a bug. Report the issue here to Apple: www.apple.com/feedback
iOS7.0.3 will be released next week, which as of now, I know is primarily for an iMessage but hopefully it will clear up some of these email issues some are also having.

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is click event message box will not working correct

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps!

I upgraded to 6.02 and still get this message from Gmail: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version."

When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?

Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Be aware that TenFourFox doesn't support plugins.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

Iphone 5s receiver /earpiece not working

My iPhone 5s' earpiece receiver is not working. :( i even tried troubleshooting provided by other threads but still no luck. :(
Does any of you having the same issue?

Hey RoviMat,
Thanks for the question. I understand that you are experiencing issues with the receiver on your iPhone 5s, and that you have already attempted some troubleshooting steps. I wanted to provide the following resource to you in case any steps were missed, and if not, so you can follow the last step to contact Apple for support and service options.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Follow these steps to resolve the issue:
1. Increase the volume during the call.
2. Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
3. Make sure nothing is plugged into the headphone jack or the dock connector.
4. Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
5. Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
6. If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
7. Restart the iPhone.
8. Make sure your device is up to date.
9. If the issue is not resolved after restoring the iPhone software, contact Apple Support.
Thanks,
Matt M.

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?

Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

System Update not working correctly

Hi forum,
System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
1: Not detecting old versions
SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
2: Not installing a suggested update
Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
Regards
AH_DE

Dear Herik,
thanks for your answer.
I checked the log file and found thousands of entries. Here are the lines related to "Fix for ...".
Info    2010-02-03 , 08:40:37
          bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
          Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
Info    2010-02-03 , 08:40:43
          bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
          Message: Candidate list:
Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
Info    2010-02-03 , 08:40:57
          bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
          Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
Info    2010-02-03 , 08:40:57
          bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
          Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
Info    2010-02-03 , 08:40:57
          bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
          Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
ADDITIONAL ENTRIES
Info    2010-02-03 , 08:40:57
          bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
          Message: System updated:
          Installed=0
          Not Installed=Tvsu.Beans.Update[]
          Deferred=0
          Download Failed=0
          Hidden=0
Severe          2010-02-03 , 08:41:17
          bei Tvsu.Sdk.SuSdk.ShutDownApplication()
          Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Since I'm a normal user only, I can't interprete this information. Do you know what to do?
Kind Regards
AH_DE

PAvilion dv6, fan not working correctly?

Was on my laptop, it shut down randomly, notification popped up saying fan was not working correctly. Is there a way to fix this? Or will it have to be sent away?

Try a can of compressed air in the reverse direction of the normal air flow. You may just have a massive amount of dust on the inside of the heatsink near the fan blades.
Here is a youtube video and about 15min in you can see the fan clearly:
http://www.youtube.com/watch?v=5VMqrudLhJA&feature=player_detailpage#t=1s
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

HT201365 my text to send messages is now not working correctly after upgrading

Since upgrading last week my text is not working correctly it is very slow does not show the letter being used and takes seconds to be put in

Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

Receive Connectors not working correctly - using random connectors.

Similar Messages

Maybe you are looking for