Receive email from outlook to SAP inbox SBWP

hi,
I want to send email from my outlook and want to receive it in the SAP system inbox (SBWP). Can anyone please help me.
Thanks,
Hiral Soni

Hiral,
there's a step-by-step guide in the SAP help:
http://help.sap.com/saphelp_nw70/helpdata/EN/55/a8b538891b11d2a25a00a0c943858e/frameset.htm
kr, achim

Similar Messages

  • To send an email from outlook to SAP user in SAP

    Hi,
    Is it possible to send an email from outlook to SAP user in SAP?
    Regards,
    Mizan

    Hi Mizan......
    Yes off course it is possible.
    Generally how we put the CC to our ionternal users like you have to put their email address while sending mail through SAP viq outlook.
    The mail will go from SAP but via. outlook and user will receive the mail in Outlook Integration and not inside B1.......
    If you want it in B1 then instead of sending mail you can send the same by choosing option Int......
    Regards,
    Rahul

  • Cant receive emails from outlook

    Need help please....cant receive emails on my iphone from my outlook....send is fine. i have talked with the cust service people and we had it working and then it just stopped...i dont get it but im sure its very simple. i have tried deleting and adding account again but doesnt seem to work....any suggestions?

    Any error message provided when the account is checked for new messages with your iPhone?
    Do you leave Outlook on your computer launched and running actively checking the account for new messages while your iPhone is doing the same?
    If so, this can pose a problem. Although it is possible to access a POP account with more than one email client, a POP account is designed to be accessed with a single email client only. Only one email client at a time can be communicating with the incoming mail server - checking the account for new messages and/or downloading new messages received at the incoming mail server.
    If Outlook is launched and running, quit Outlook to see if this makes any difference with your iPhone.

  • Reply from the notifiaction mail (from outlook) to sap Inbox

    HI
    I have a requirement where in I am sending a notification mail to user saying Document verification is OPEN(pending) in your name.1s he finshes that task he will reply to the same mail saying ClLOSED.
    Now can we get this mail reply to SAP Inbox of the reply receiver ?
    And If yes How can we process that either by subject or body content to close that activity.
    (We dont want to send workitem shortcut to the user,This will make us not to involve user into SAP S\W)

    Hi- you could refer below thread
    http://forums.sdn.sap.com/thread.jspa?threadID=2132333
    vinoth

  • Can't receive emails from Outlook 2007...

    It was fine until around mid May, then just got error message saying Cant access server, check your Mail settings are correct - but all is correct and unchanged from previous... Have shut down iPad and restarted, have close Outlook and tried test emails and downloading to iPad, have checked settings with server. It seems to Send fine, just not download! Have POP setup, however, often out PC Outlook is closed and therefore we should be getting emails on iPad, and were fine before mid May. Very frustrating!

    If you are using multiple devices...
    Using a POP account with multiple devices
    Or...   iPad: What to do if you can't send or receive email

  • Not receiving email from outlook

    I can receive e-mail from my Company server but cannot get outlook or gmai messages.  Outgoing mail is OK.  Any thoughts?

    With an exchange account, it's "Mail Days to Sync":
    http://support.apple.com/kb/HT2723

  • Incoming emails from MS Outlook to SAP Inbox

    We have configured SCOT and I can send emails from SAP to outlook.When I try to reply I could not see in SBWP user inbox.
    We had discussion with network / exchange team they said no issues from them and they suggest us to check at SAP.Is there a settings I have to for Incoming emails from outlook to SAP Inbox.
    - Jim

    Hi,
    Normally, its not recommended to configure incoming mails to SAP as it unnecessarily occupy space in DB. If your business demands it, then please refer the below help link and SAP note for configuring the same.
    http://help.sap.com/saphelp_nw04/helpdata/EN/af/73563c1e734f0fe10000000a114084/content.htm
    Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
    Regards,
    Sharath

  • How to get mail from Outlook to SAP GUI (workflow)

    Hi All ,
    How can we get a mail from outlook or personal mail into SAP GUI .
    can it be used as an event for 'wait for event step ' in workflow . ?
    Thanks ,
    Naval bhatt

    Hi Naval,
    I just want to clarify some areas from your question:
    1. Will a workflow be triggered because of the email from Outlook to SAP? Does it always have to start from the Outlook side?
    The integration of SAP Workplace (thru Workflow) and Outlook is possible using the Extended Notification (tcode SWNCONFIG). Here, you can send an email from SAP to Outlook then execute a function from your Outlook message and then you will be directed to the tcode of SAP side (SAP GUI).
    Regards,
    Reymar

  • SAP Inbound email related query (from Outlook to SAP)

    Hi,
    I am in a situation where I have to send email from MS Outlook to SAP with a PDF file as an attachment. The PDF file will be stripped into an XML file and processed further and a reply is sent to the user sending the email. The Outlook admins have set up the necessary config for the connectivity - I am able to send the PDF file from Outlook to SAP (everything has been configured using SICF, SCOT etc) for inbound processing. In SCOT - Settings->Inbound processing I have used a Class which implements interface IF_INBOUND_EXIT_BCS (as per one of the blogs by Jeff Gebo). I can see the trace file in SCOT ->Utilities->Trace->Internal trace. When I send the PDF file, I can see in the trace (I cannot debug as the SAPCONNECT user which gets called in the backgound triggers the user exit class). In the trace file I can see my class gets instantiated but the next step to read the PDF file fails.  The code come the Jeff's blog which I use is as follows:
    Set return code so that no other Inbound Exist class will be called
    e_retcode = IF_INBOUND_EXIT_BCS=>gc_terminate.
    try.
    Get the email document that was sent.
      data: document type ref to if_document_bcs.
      document = io_sreq->get_document( ).
    Get the sender's address to reply back
      lv_sender = io_sreq->get_sender( ).
      addr = lv_sender->address_string( ).
      return_addr = addr.
    Get the interactive form attachment.
      data: pdf_table type BCSS_DBPC.
      pdf_table = document->get_body_part_content( 2 ).
    Convert the pdf table into an xstring.
      data: pdf_xstring type xstring,
            pdf_line type solix.
      clear pdf_xstring.
      loop at pdf_table-cont_hex into pdf_line.
        concatenate pdf_xstring pdf_line-line into pdf_xstring in byte mode.
      endloop.
    Process the PDF form
      data: formxml type string.
      formxml = me->process_form( pdf = pdf_xstring ).
    Here the contents of the pdf_table-cont_hex is blank (I used a table to populate the values). All I get in my Outlook inbox is a empty email with an empty subject from SAP (called by the instantiated class of the Interface)
    The irony is that I setup the same procedure has been configured and setup in another totally different SAP system and everything works fine there - I did a comparision of both SAP systems and everything seems fine (config wise and user exit class wise) and  everything is identical. I have no clue as to why it works in one system and not in the other system.
    If anyone has any pointers wit will be greatly appreciated as I am on a tight deadline - I have checked OSS but with no help.
    Thanks in advance,
    Ryan

    You may be able to find more information by putting an infinite loop at the beginning of your user exit:
    x = ' '.
    while x = ' '.
    x = ' '.
    endwhile.
    and then go into debugging via SM50 and set the x variable to break out of the loop.
    This technique is useful debugging workflows and other code which you cannot get to directly by placing a break-point.
    Andrew

  • I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email.  Now it won't let me do that and it syncs all my inbox.  How can I change it back to sync less.  I can't find the right place.

    I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email.  Now it won't let me do that and it syncs all my inbox.  How can I change it back to sync less.  I can't find the right place.

    I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available?  Any idea why that would be?

  • Why is icloud mail eliminating received emails from my inbox?

    My icloud inbox is receiving emails from certain users and then the email disappears from the inbox, but it doesn't go to the junk or trash box, it just disappears? 

    geoffpowers wrote:
    I am having continuing problems with email being 'lost' from my inbox or transferred to other folders before I have had an opportunity to deal with it and  without my having actioned a setting to this effect.  I have 'lost' nearly a fortnight's worth of email in this way - I have no idea where it has gone.  I have discovered a completely new folder called 'BT Yahoo! Broadband', which I have not created and which contains (some) email from 2010??!!
    Also mail is displaying in reverse order (most recent at the end/bottom and oldest at the top)!!  Please can someone explain what is going on, as I appear to have lost control over these 'happenings?
    Hi.
    I would suggest changing your password as a start, in case someone else has managed to gain access.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Transfer emails from Outlook to CRM

    Hello
    Where I can fined document about the capability to transfer emails from Outlook to CRM.
    I have heard somthing a bout "one 2 one"??
    Thanks
    Merav

    Hi Merav,
    Sure. You can use either Agent Inbox workflow or ERMS workflow to route the email to a specific Org.Unit, so that the agents can view the emails in their Agent Inbox.
    For More details about Agent Inbox, please refer to the below link from SAP Help Portal:
    [http://help.sap.com/saphelp_crm70/helpdata/EN/46/22e6e9ed6c5872e10000000a11466f/frameset.htm]
    And regarding ERMS, you can configure a ERMS Rule to Route the incoming email to a Specific Org/Position, based upon some condition.
    For More details about ERMS, please refer to the below link from SAP Help Portal:
    [http://help.sap.com/saphelp_crm70/helpdata/EN/46/1c4dd9f3ec5873e10000000a11466f/frameset.htm]
    Hope this information helps.
    With Best Regards,
    Vinod

  • Curve 8530 not receiving emails from contacts

    Hi, about a week ago, my Curve stopped receiving emails from people in my contacts list.  I will still get them from companies that I've placed orders with in the past, as well as a notification that someone replied to a post I made on here earlier this week, but anyone in my address book isn't getting through to the phone, but they're in the inbox on Yahoo!  I ran the diagnostic check that someone suggested, and the email address said "no" after it for connected.  I don't know how to fix this.  I've had the phone since May and never had an issue until now.  I've spent over an hour on the phone with Verizon trying to solve it and they couldn't figure it out.  I've deleted the account & added it back and I receive the email telling me it's registered, but no more.  Also, when I go into "Folder Reconciliation" nothing is checked off, and I don't know how to do it.
    Any help would be greatly appreciated for me.  Thank you.

    cameron172 wrote:
    Had my Curve 8530 for more than a year issue-free with Verizon. Have an Outlook Web Access (OWA) and Hotmail email account registered. Last night, OWA messages was not being received and cannot be sent from the phone using the OWA account. However, the Hotmail account is working just fine, messages being sent and received. I have tried:
    1) Rebooting/Removed battery
    2) Updating password, username, and server URL under email accounts.
    3) Re-registered the phone to the network. After 20 minutes, no change.
    4) Resent service book for the account.
    5) Ran diagnostic of mobile network. All "Yes" except for "Connected to: [OWA account] : No"
    1-5 is all the troubleshooting I've found for the Curve 8530 and nothing has helped. Please help!
    I would suggest that you do ALL of the above again.
    If your service is not restored, you really need to call Verizon tech support and ask for your issue to be escalated to RIM level tech support.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Moving emails from outlook express to mail

    is there a way to get all of my old emails from outlook express to mail? My old PC is about to die and then I'll loose all of my emails :s that is why I am wondering if there is a solution, now.

    I don't know whether you can do this on a PC version of Outlook Express or not, but I know that you can do stuff like this with Apple's Mail, so it may be worth a shot to try this and see if it works.
    First off, I am assuming that all this old mail is a POP account, and not IMAP. If it were IMAP, it would all be safe on your email account provider's IMAP server and all you would have to do is create the new account in Apple Mail and the first time you connected, it would autosync with the server and all your old mail would just be there. But if POP, all mail is downloaded to your computer then deleted from the server. So, assuming this to be a POP account, here is what I would try to do if I were you.
    1. Go to http://webmail.aol.com and sign up for a new free IMAP email account from AOL. You could get a free gmail account if you wanted, too, but I believe there is a bit of extra configuration involved in making it a IMAP and not POP. AOL is IMAP by default. Plus, AOL is a built-in new-account setup option in Apple Mail.
    2. On the PC in Outlook Express, add a new account for your new AOL email account. See http://support.microsoft.com/kb/883081 to find out all the particulars about account settings and how to do it in Outlook Express.
    3. On the Mac in Apple Mail, as stated in #1 above, AOL Mail is one of the options when creating a new account. Just follow Mail's "new account wizard" to create your AOL account there.
    4. On the Mac, create a second new account for your existing POP account. Mirror the individual mail folder layout that are on your old PC for the old POP account.
    5. This is the part that I don't know if PC Outlook Express will let you do, but I know that Apple Mail does:
    (a) Open each of your mail folders in the old POP account stored on your dying hard drive one at a time
    (b) Highlight/select all the messages in that folder
    (c) Drag them to the AOL inbox. In Apple Mail, they would be copied to the IMAP server, preserving all the original "From" and "Date Received" and other information like that.
    6. On the Mac, drag the messages that you uploaded into the AOL inbox and drop them into the appropriate folder of the "legacy" POP account that you created in #4. That will clear them out of the AOL inbox and they will now be stored on your computer as downloaded popmails.
    7. Go back to step #5 and repeat this process for each of your folders on the old PC until you have emptied all the messages off your old computer.
    Now, I will have to issue a disclaimer that I have only done this myself from IMAP to IMAP and to/from IMAP from/to "On My Mac" folders, which keeps copies of messages locally but not on IMAP servers. So I have no reason to suspect that this would not apply equally to POP since it worked with "On My Mac" folders. And whether the PC's Outlook Express will support the POP-to-IMAP drag-and-drop is a total unknown to me.
    I'm sure I'll hear back via this forum whether this worked or not, but it's the best idea that I can come up with, and like I said, a similar (but not identical) situation worked for me before.

  • Unable to send email POP3 email from Outlook 2013 unless signed on as local admin

    Windows 7 Outlook 2013
    I recently upgraded from Office 2010 to 2013.  For several weeks everything ran smoothly but a few days ago I noticed that my Verizon POP3 account was unable to send mail - items just sit in outbox.  I have deleted/added the account and the profile
    multiple times, this will solve the problem for a few days but then it returns again.  I discovered that if I run Outlook as an administrator the mail will send without a problem.  I have checked permissions on the pst file and do not see any issues. 
    Sometimes but not always I receive a message on the POP3 send that there was no network connection check mode. The send test message in the account set up never has a problem - it's only the periodic Outlook sending and receiving when the problem occurs. 
    Any ideas?
    Thanks.
    enagy

    Hi,
    Since the problem could be be solved for a few days by deleting/re-adding the profile and the account, the problem may be related to the .pst file. When the problem comes back, run Scanpst.exe to repair the. pst file, will the problem be fixed again?
    Learn how to use Scanpst.exe:http://support.microsoft.com/kb/272227/en-us
    We can also assume there are other programs that are interacting with the .pst file, reboot and disable the possible programs to test if this makes a difference.
    If you're disconnected, you'll also need to check the network cable, try restarting your computer, or contact your Internet Service Provider or your system administrator. This implies the issue may be related to the anti-virus program or the firewall settings,
    which may be scanning the outgoing emails from Outlook. We can disable them temporarily to send the emails again, check if this helps.
    Regards,
    Melon Chen
    TechNet Community Support

Maybe you are looking for