Receive error: There was an error while copying to the Clipboard. An internal error occurred.

I receive the message "There was an error while copying to the Clipboard. An internal error occurred." when I highlight anything and copy to the clipboard. I've searched and found others with the same issue, but they were either on an older OS, Acrobat ver, or their issue was intermittent. My issue always occurrs and I cannot copy anything to the clipboard.
I'm running Win 7 Ultimate x64 SP1 and Acrobat Pro 9.4.4. Any suggestions would be appreciated.
Thanks,
RJ

Hi MelSchultz,
Thanks for your post. However, this Forum is meant to discuss
issues related to acrobat.com and not acrobat. To post an issue
related to acrobat please visit the acrobat forum :
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
You may also open a web case with Adobe Support. To do so,
please visit the following link :
https://www.adobe.com/cfusion/support/index.cfm?event=portal

Similar Messages

  • Provide steps to send Root CA certificate to the Lync client, getting error" There was a problem verifying certificate from the server"

    Hi,
      I Build an Lync 2013 set up with FEpool, Director pool and Exchange server is integrated. I have windows 8 client machine, with Lync client installed. When I try to login to the lync client, I am getting error like"There was a problem verifying
    certificate from the server".
    When I installed ROOT CA cert  manually on client machine I am able to login to the lync client. similarly if I add my client machine in my domain, I am able to login to the Lync client.
    Now is there any other way to send the certificate automatically to the client machine (Which are NOT part of the DOMAIN) from the server, instead of manual installation process.
    Please help me troubleshoot this problem

    Agree with S Guna, there is no easy way to push a certificate automatically to a client that you don't control other than building an installer package and asking them to run it.  In this situation, if there are a lot of non-domain joined machines
    a third party certificate is the way you need to go.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • There is an internal Adobe Reader error while copying to the Clipboard.

    Operating System: Windows 7 Professional 64 bits
    Adobe Reader Vesion: XI
    That error is very easy to reproduce: select two or more lines of a pdf document and press "cntl + C" several times in repetition. Frequently 4 ou 5 followed repetitions trigger that issue. A curious thing happens when "cntl + C" starts to fail: the copying process through "Edit > Copy" menu still works. But if you try repeated times to copying through "Edit > Copy" menu, then this method also starts to fail too, but at the same time of this failure, "cntrl + c" starts to work again (it is like a seesaw).
    My computer has no skype plugin installed, so the skype plugin + Internet Explorer is not the root cause of that issue.
    This problem occurs even if I am running only Adobe Reader XI application, i. e., without start Internet Explorer, or any office application, or windows live messenger, or skype, etc.

    in windows 7
    start-control panel-uninstall programs
    uninstall the "Skype Click to Call", this will uninstall addins from ie, firefox, you dont have to uninstall skype.
    in ie and firefox you can disable addons but can not uninstall them using ie or firefox interface, when you uninstall Skype Click to Call, it will remove it from all added browsers.
    This works me now.
    Edit 1:
    Unfortunately skype trick does not work.
    I recently switched to windows 8 and reliazed that there is no copy error any more.
    Edit2:
    This error maybe caused by Babylon dictionary which has an Adobe Acrobat or Reader addon which captures the text from pdf documnet when ctrl+right mouse click. This feature is enabled when it is copied to" C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\plug_ins " or  "C:\Program Files (x86)\Adobe\Reader 9.0\Reader\plug_ins " directory, so if it is copied such copying error appeared, if not copied it does not appear. Baylon dictionary addin is installed when you install babylon dictionary software, and it is here " C:\Program Files (x86)\Babylon\Babylon-Pro\Utils ", its name is " BabylonRPI.api "
    Edit3:06-April-2013
    My experience is that Babylon Dictionary was causing this error. With babylon version 10 acrobat does not give that kind of error anymore, on windows 7 x64, but previous version leftover files may cause this error again even if you remove previous versions and install version 10. With a clean install of windows 7 x64 with babylon dictionary version 10 there is no error anymore.

  • Can't sign into YouTube (There was an issue while logging you in to YouTube)

    Hello,
    Lately I can't login to YouTube, because when I try to I get the error "There was an issue while logging you in to YouTube", but I'm able to login to google.com I've tried everything I could think of (except de-installing FF or something like that). Could you guys help me?
    Thanks in advance!

    So happy it worked for you! I'm SO EXCITED that I was actually able to help someone else out with a solution for a change! I just rebooted my comp. and YouTube is '''STILL''' letting me Login! Whoooo hooooo! Ü

  • "Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

    I created a site column at the root of my site and I have publishing turned on.  I selected the Hyperlink with formatting and constraints for publishing.
    I went to my subsite and added the column.  The request was to have "Open in new tab" for their hyperlinks.  I was able to get the column to be added and yesterday we added items without a problem. 
    The problem arose when, today, a user told me that he could not edit the hyperlink.  He has modify / delete permissions on this list.
    He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
    Link in New Window checkbox, the Display Text, and Tooltip:
    "Message from Webpage  There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
    We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
    The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
    and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem.  I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
    Summary from this link below: Comment out, below, in AssetPickers.js
    //callbackThis.VerifyAnchorElement(HtmlElement, Config);
    perform IISReset
    This is referenced in the item below:
    http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
    TThThis is possibly the same information that I saw, possibly from the above link as reference.
    http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
    Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
    I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
    Thank you!
    Matt

    We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
    I blog about this issue and having the office reference.
    Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
    So if you apply the April CU then you will be fine.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later.  7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

    I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later.  7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

    AppTrial1 where are you seeing this error exactly?  For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Publish Error: There was an error reading your iDisk quota

    While trying publish to my .Mac account, iWeb gives me this message: Publish Error: There was an error reading your iDisk quota.
    I published earlier to a group and it worked. I even went to my .Mac/iDisk system preferences on the web and alocated more space for my group site.
    No Dice.
    I just tried publishing to .Mac without the group.
    No dice.
    I even tried ellimanting some pages
    No Dice.
    Hmmm. Frustrating. It worked before, now what?

    i followed these steps recommended by mac support and it solved my problem. try it.
    We are currently investigating an issue affecting some users who receive an error message while trying to publish a page or site using iWeb. The error states: "There was an error reading your iDisk quota."
    Before we proceed with the steps to resolve this issue, we recommend that you back up the iWeb data file. If you already have this file backed up, you may skip to "Resolving the issue" below.
    To locate the iWeb data file:
    1. From the Finder menu bar, select Go > Go to Folder.
    2. Type (or copy and paste) ~/Library/Application Support/iWeb into the field and click Go. You should now see a file named Domain. This file may also appear as Domain.sites, but we will refer to it as Domain throughout these instructions.
    If you have the Backup application that is included with .Mac, you can use this to back up the file to your iDisk, CD/DVD, or to an external hard disk.
    Note: Though there is an iLife plan in Backup, it does not currently back up the files associated with iWeb. To back up iWeb files, you will need to use either the Custom or Home Folder plan.
    If you do not have Backup, you can create a copy of the file and place the copy in a safe place. To duplicate the Domain file, click the file once to highlight it, then select Duplicate from the File menu. This will create a copy of the file named, "Domain copy." Move this file to the desktop or any other safe location.
    Resolving the issue:
    1. Quit iWeb if it is open.
    2. From the Finder menu bar, select Go > Go to Folder.
    3. Type (or copy and paste) ~/Library/Application Support/iWeb into the field and click Go. You should now see a file named Domain. This is a Mac OS X package file.
    Note: A package is a relatively common type of document in Mac OS X; it is essentially a sealed folder. It contains individual items, but cannot be opened in the same manner as a folder.
    4. To open the package, hold down the Control key and click on the Domain package file.
    Note: If you have a two-button mouse, this step can be accomplished by right-clicking the Domain package file.
    5. Select Show Package Contents from the contextual menu that appears.
    6. A new window titled Domain will appear showing the contents of the package. Here you will see one file (or possibly two files) named "assets.<membername>.groups.<groupname>.plist" or "assets.<membername>.plist" where <membername> and <groupname> correspond to your .Mac member name and .Mac Group name.
    Note: Your .Mac member name is the first part of your .Mac email address, before "@mac.com."
    7. If you have either or both of these files, move them to the trash. Then close the Domain window.
    8. Open iWeb and try publishing again.

  • Error : There was a problem reading this document (109).

    hello, i have a lot of PDF Files that become corrupted ! i dont know why
    and i receive this error message when i open the pdf file:
    " There was an error processing a page. There was a problem reading this document (109)."
    im using adobe acrobat 8 prof. also acrobat reader.
    please can any one help me to solve this big problem.

    When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
    I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
    Read below:
    1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
    1.2. No document security was applied of any sort on the file.
    1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
    1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
    1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
    1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
    1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
    1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
    1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
    1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
    1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
    1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
    1.13. Sorry for so lengthy instructions, but I had no choice.

  • Exchange setup error: "There was a problem accessing the registry on this computer"

     Hi,
    i am trying to install Exchange 2007 SP1 in a Windows 2003 Server standard 32 bits version.
    During the "Readiness checks" i received the next error in "Hub transport role prerequisites":
    Error:
    There was a problem accessing the registry on this computer. This may happen if the Remote Registry service is not running; it may also indicate a network problem.
    Remote Registry service is running. I've searched for the error in google and in some topics appears that the error is due to the "Client for Microsoft Networks" and "File and Printer Sharing" is not installed in the LAN properties. The server has 2 network cards and in both of them is checked. One of the connections is disabled.
    I dont know what more to do, any help will be appreciated.
    Thanks

    No, firewall is disabled.
    Setup Logs says:
    10:50:04.890: Starting Collecting Data phase.
    10:50:04.921: No mapping between account names and security IDs was done
    10:50:04.984: Error (Unexpected error [0x674CBB7E] while executing command '[Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName)'.) trying to process object [Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName), skipping object.
    10:50:06.093: Completed Collecting Data phase.
    10:50:06.125: Error (Rule name 'PreReq_fPassiveUninstallNoCMSPresentKey' referenced by rule 'PreReq_fPassiveUninstallNoCMSPresent' in input file is not defined) in format of rules in configuration file.
    10:50:06.171: Starting Postprocessing Rules phase.
    10:50:06.187: Completed Postprocessing Rules phase.
    Thanks for your help!

  • Publish Error: There was an error updating .Mac

    Hello,
    This is the first time I have had any problems with iWeb when trying to publish a site. After the site and pages are created, I keep getting the error:
    "Publish Error: There was an error updating .Mac".
    - I have iWeb 1.1.2
    - I am not over quota.
    - My account is not expired.
    - I've tried multiple times over a 1.5h period.
    - I've tried closing/restarting iWeb, rebooting my machine, and manually deleting all files in my .Mac/Web/iWeb folder in case any got corrupted somehow.
    - I've emailed tech support about this too.
    Hopefully this is just a server issue on Apple's side and is temporary. Anybody experience problems around today?
    Cheers.
    MacBook   Mac OS X (10.4.9)  

    Okay I am very relieved to hear that people out there are experiencing what seems to be the exact same issue (and that I don't have to suffer through Apple support). I as well, after experiecing this issue, was totally unable to login to my website (password kept getting rejected).
    As of right now - 12h after first experiencing this issue - I still cannot publish to iWeb.
    When trying what was suggested earlier, a lowercase login, I received a new and more interesting error message:
    Publish Error: An error occurred while publishing file “navbarseparator3.png.” Try choosing File > Publish All.
    I then tried to "Publish All" and viola - it worked! What is fascinating to me is that I have used the same login/password for a year now with no problems and how a single capital letter in a login can cause so much grief. Hmm. Anyways, thank you Mr. Apnewbie for your suggestion.
    I think .Mac is a superb service - however for the price, there are still some very fundamental kinks that it seems they didn't throughouly test out at Apple before charging people/releasing their software. Mainly, all the kinks related to multiple passwords with multiple web sites (and obviously logins!).
      Mac OS X (10.4.9)  
    I'm marking this as "solved" (though why we all mysteriously had the same odd experience at the same time is yet unresolved. The solution suggested above has worked for me. Please try and comment here if it works for you too. I hope it does.
      Mac OS X (10.4.9)  

  • I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting".  How do I fix it so that it'll burn?

    I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting".  How do I fix it so that it'll burn?

    Hi
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Yours Bengt W

  • How can I solve a Parse Error: "There was a problem parsing this package"

    Hello;
    I developed a really simple app in Flash Pro CC for android. I published it using AIR 13.0 for Android. When I tried to install it I received the Parse Error: "There was a problem parsing this package"
    Im not sure if the problem has something to do with my app xml file, but here it is:
    <?xml version="1.0" encoding="UTF-8"?>
    <application xmlns="http://ns.adobe.com/air/application/13.0">
         <id>TOeatorNOTTOeat</id>
         <versionNumber>1.0.0</versionNumber>
         <versionLabel>TouchEvent</versionLabel>
         <filename>TO eat or NOT TO eat</filename>
         <description/>
         <name>TO eat or NOT TO eat</name>
         <copyright/>
         <initialWindow>
              <content>TO%20eat%20or%20NOT%20TO%20eat.swf</content>
              <systemChrome>standard</systemChrome>
              <transparent>false</transparent>
              <visible>true</visible>
              <fullScreen>true</fullScreen>
              <aspectRatio>landscape</aspectRatio>
              <renderMode>gpu</renderMode>
              <autoOrients>false</autoOrients>
         </initialWindow>
         <icon>
              <image36x36>icons/icon36x36.png</image36x36>
              <image48x48>icons/icon48x48.png</image48x48>
              <image72x72>icons/icon72x72.png</image72x72>
              <image96x96>icons/icon96x96.png</image96x96>
         </icon>
         <customUpdateUI>false</customUpdateUI>
         <allowBrowserInvocation>false</allowBrowserInvocation>
        <android>
              <manifestAdditions>
                   <![CDATA[<manifest> </manifest>]]>
              </manifestAdditions>
         </android>
         <supportedLanguages>en</supportedLanguages>
    </application>
    What do you think is the best to check?

    i don't see any problem with your manifest.
    try saving your fla and the published files to a new directory and see if the error resolves.

  • Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

    Hi,
    Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
    I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'. 
    Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
    Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
    is not a possible owner of the resource.
    For help, click:
    http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
    BUTTONS:
    OK
    I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
    Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
    application SQL Server SG1DB. Could not move the resource to available storage. An error occured
    while moving the resource BCK_SG1DB to the clustered service or application Available Storage
    Any ideas why it failed or how could I delete the SQL server instance from Clauster?
    Thx

    Hello,
    Please read the following resource.
    https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

    Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
    If a shortcut is used while Firefox is already open the error does not occur.

    As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
    Regards, Steve

  • When my screensaver starts, it gives me an error there was a problem connecting to server

    It seems like I'm having a problem with iPhoto. Whenever my screensaver comes on, it just sits on "Loading Photos" and then when I move the cursor to get out of the screensaver, I get a warning saying "There was a problem connecting to server XXX"
    I don't know why it's trying to connect to this server. I have googled and searched and tried everything that everyone has said (renaming/deleting plists, removing all login items, clearing iPhoto and trying to start over...) but nothing has helped.
    This error also comes up pretty consistantly when iPhoto is open.
    I'm not really sure what else to check. I can't find any trace of the remote server, so I'm not sure why this is coming up.
    I'm running Mountain Lion and whatever the latest version of iPhoto is.
    Any thoughts?

    I was able to get it. Apparently there was some old photo in my iPhoto library that was being mapped out to the server that it kept trying to connect to.
    Which should have been relatively easy to detect, except the way that iPhoto is setup, there was no real way to find the source for each photo.
    What I was able to do to was, under photos, CMD-A to select all photos and then try and move them to an album. It popped up with a notice saying that it wasn't able to find XXXXX.jpg and I had the option to cancel or find the photo. So I renamed another photo on my desktop to XXXXX.jpg, and when the error came up, I selected Find and then used the copy on my desktop to replace it.
    After I did that, it let me add all of the photos to an album and I was able to launch the screensaver successfully.
    A pretty big pain in the but that would have been easier to resolve if the UI of iPhoto was a little more detailed or customizable. But oh well it worked for me.
    Hopefully this helps.

Maybe you are looking for