Receive ping throw WRT54G setup but cannot display web-pages.

Hi
I have a WRT54G router, connected to the same DSL modem for 4 years and everything was fine till last week. Since last week, i cannot display any web pages, despite the fact that i am connected to my ISP (it was checked with there support team).
I have 3 different laptops and 1 desktop with different browsers and different  OS (XP, VISTA)  on them and same antivirus (AVAST!).
I receive pings from all the laptops and desktop to the router (ping 192.168.1.1), which mean that they connect probably to the router  
I was able to receive ping from different websites throw the router setup (192.168.1.1) under "Administrator" tab and then under "diagnostic" tab, But I cannot display any web pages.
Does any one might know what may be the problem?
Thank you. 

Thank you for the quick respond.
I connect the computer directly to the modem and it work just fine.
When I ping throw command prompt in the computer (connected to the router) I receive the next massage  "bla bla bla o recevie bla bla 5 packet loss or something".
 I was able to receive ping from different websites throw the router setup (192.168.1.1) under "Administration" tab and then under "diagnostic" tab.
The problem was solved yesterday by updating the firmware and reseting the router with the reset button.
 Very wired.
Anyone have any idea what may was the problem?

Similar Messages

  • Explorer Cannot Display Web Page Desk Top 3000J11573​87-A11

    Originally worked fine displayed web page withOUT a problem FOR OVER A YEAR.  Starting in Jan 2008 (just after warranty EXPIRED) it just reports "cannot display web page"  Using my Xp computer I can get all of the web pages to respond. 
    Using internal checks on the Lenovo 3000J  it reports everything is OK. 
    I can receive updates on this computer and just today I installed all updates through 4/20/2008. Windows Upgrade works fine on the Lenovo.   However I cannot access the web otherwise.  I am typing this message on my Xp.  Computer because I have not been able to get a webpage to display on the Lenovo
    I want to stay with Vista Home Premium however   HOW CAN I GET THE WEB PAGE TO DISPLAY ?
    VIC
    Message Edited by vicflack on 04-20-2008 10:51 AM

    Thanks for the helf.  I disabled the firewall which is norton. and then rebooted still not able to display the web-page.  However I may have gotten closer to the problem. 
    When I select "Properties" from the file menu on the "Cannot display page" I get the following address:
    res://ieframe.dll/dnserror.htm#http://www.yahoo.co​m
    Of course it cannot display this page because it does not exist.  The page I tried to load was http://www.yahoo.com   when I select this page on my Xp computer it loads correctly and under file- properties -address http://www.yahoo.com and all is well with the world. 
    For some reason on my Lenovo Vista Home Premium Computer Internet EXployer is inserting
    "res://ieframe.dll/dnserror#http://www.yahoo.com
    Thanks for any help
    Vic

  • I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.

    I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.  Any idea what the problem may be?

    You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
    Regards.

  • EBS(SSL enabled) URL 12.1.3 cannot display web page though apps services are up

    Hi all,
    DB:11.2.0.3.0
    EBS:12.1.3
    O/S: Sun Solaris SPARC 64 bits 5.10
    EBS URL 12.1.3 cannot display web page though apps services are up. This target instance is SSL enabled and cloned instance. Autoconfig runs successfully on both the tiers.
    1 DB node and 1 apps Node(forms,Reports,CM,Web).
    DB Tier Autocofig:
    Updating rdbms version in Context file to db112
    Updating rdbms type in Context file to 64 bits
    Configuring templates from ORACLE_HOME ...
    AutoConfig completed successfully.
    $
    Autoconfig Apps Tier
    Configuring templates from all of the product tops...
            Configuring AD_TOP........COMPLETED
            Configuring FND_TOP.......COMPLETED
            Configuring ICX_TOP.......COMPLETED
            Configuring MSC_TOP.......COMPLETED
            Configuring IEO_TOP.......COMPLETED
            Configuring BIS_TOP.......COMPLETED
            Configuring AMS_TOP.......COMPLETED
            Configuring CCT_TOP.......COMPLETED
            Configuring WSH_TOP.......COMPLETED
            Configuring CLN_TOP.......COMPLETED
            Configuring OKE_TOP.......COMPLETED
            Configuring OKL_TOP.......COMPLETED
            Configuring OKS_TOP.......COMPLETED
            Configuring CSF_TOP.......COMPLETED
            Configuring IGS_TOP.......COMPLETED
            Configuring IBY_TOP.......COMPLETED
            Configuring JTF_TOP.......COMPLETED
            Configuring MWA_TOP.......COMPLETED
            Configuring CN_TOP........COMPLETED
            Configuring CSI_TOP.......COMPLETED
            Configuring WIP_TOP.......COMPLETED
            Configuring CSE_TOP.......COMPLETED
            Configuring EAM_TOP.......COMPLETED
            Configuring FTE_TOP.......COMPLETED
            Configuring ONT_TOP.......COMPLETED
            Configuring AR_TOP........COMPLETED
            Configuring AHL_TOP.......COMPLETED
            Configuring OZF_TOP.......COMPLETED
            Configuring IES_TOP.......COMPLETED
            Configuring CSD_TOP.......COMPLETED
            Configuring IGC_TOP.......COMPLETED
    AutoConfig completed successfully.
    $
    ---------------------------------+--------------------+---------+---------
    ias-component                    | process-type       |     pid | status
    ---------------------------------+--------------------+---------+---------
    OC4JGroup:default_group          | OC4J:oafm          |   10466 | Alive
    OC4JGroup:default_group          | OC4J:forms         |   10425 | Alive
    OC4JGroup:default_group          | OC4J:oacore        |   10062 | Alive
    OC4JGroup:default_group          | OC4J:oacore        |   10061 | Alive
    OC4JGroup:default_group          | OC4J:oacore        |   10060 | Alive
    OC4JGroup:default_group          | OC4J:oacore        |   10059 | Alive
    HTTP_Server                              | HTTP_Server        |    9993 | Alive
    adopmnctl.sh: exiting with status 0
    grep -i s_active_webport $CONTEXT_FILE
          <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
    Could anyone please advise what's wrong here. Why URL is not being accessible.
    Thanks for your time
    Regards,

    Yes. We are using SSL in all te instances. Please see the comparison between the working and non-working instance
    Source Instance(Working instance)
    $ grep s_webssl_port $CONTEXT_FILE
                    <web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4508</web_ssl_port>
    $
    $ grep -i s_https_listen_parameter $CONTEXT_FILE
                            <httpslistenparameter oa_var="s_https_listen_parameter">4508</httpslistenparameter>
    $ grep s_active_webport $CONTEXT_FILE
                    <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
    $
    $ grep -i s_enable_sslterminator $CONTEXT_FILE
                            <sslterminator oa_var="s_enable_sslterminator"> </sslterminator>
    Target Instance(This does not work)
    $ grep s_webssl_port $CONTEXT_FILE
          <web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4519</web_ssl_port>
    $
    $ grep -i s_https_listen_parameter $CONTEXT_FILE
             <httpslistenparameter oa_var="s_https_listen_parameter">4519</httpslistenparameter>
    $
    $ grep s_active_webport $CONTEXT_FILE
          <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
    $
    $ grep -i s_enable_sslterminator $CONTEXT_FILE
             <sslterminator oa_var="s_enable_sslterminator"/>
    Any suggestions?
    Thanks,

  • Browsers cannot display web pages on HD TV

    Hello all.
    Firstly let me start by saying I used to build and fix computers so I have a good idea about solving tech problems, but this one has me stumped!  Running snow leopard on Mac Mini.  Connected Mac Mini to HD TV VIA HDMI cable as using VGA gave out of range signal.
    Anyway the issue is that any browser will not work in any other resolution than 420 P (TV can go to 1080)
    Now, I completely reformatted the Mac and on first use it defaulted to 720p mode and browser worked (yay!)
    However, as soon as the resolution is altered, no browser will work in any other mode than 420p - infact I only have to get display preferences up and not alter anything and it stops working in 720p and other resolutions.
    I have pinged/tracerout etc and the net is NOT dropping out so that is not the issue.  The issue seems to be some video related problem, because if I delete the windowserver.plist and configuration preference files, it again boots up at 720p (which is the default for the HD tv, but if either display preferences are viewed, or the computer is restarted, that's it, the browsers stop working.
    When trying to load an address, the blue colour in the address bar which shows how far a page is loading is about a quarter of the way, it actually picks the website up because the name at the top will show (for example (welcome to facebook.com)  ) however, nothing is displayed, it just tries continually to display a page but it can't.
    There is no timeout message, so it IS connected to the website, just not displaying the contents (the browser stays white)
    I have searched on the net and found one person with this issue and no resolve.  Has anyone any ideas what else I can try to resolve it?
    Thanks

    I assume this is a wireless network, though you didn't say. What might be happening is that the mini is on the ragged edge of wireless reception. Adding extra electromagnetic interference from the TV operating at a high pixel clock is pushing reception over the edge to where it stops working.
    If that's true then you either need to try and reposition the mini further from the TV and closer to the wireless access point, or else switch to a wired connection to the network.

  • Web dynpro abap cannot display web page

    Hello
    when running Test in se80 on my web dynpro application the browser says it cannot display the web page.
    1. the url of the wd application is http://<hostname>.domain.ext:8000/sap/bc/webdynpro/sap/<component name>
    2. rz10 says that profile NSP_DVEBMGS00_<hostname> has icm/host_name_full = <hostname>.domain.ext
    3. rz11 says that icm/host_name_full = <hostname>.domain.ext
    4. smicm says that  icm/host_name_full = <hostname>.domain.ext
    5. in etc/hosts on vista 32bit version 6002 I have put:
    127.0.0.1       localhost
    127.0.0.1       <hostname>.domain.ext
    10.10.0.10      <hostname>.domain.ext          
    <empty line>          
    I also have
    SAPGLOBALHOST                              <hostname>
    rdisp/mshost                                <hostname>
    and no values at all for
    SAPLOCALHOST
    SAPLOCALHOSTFULL
    in the profiles.
    The following works:
    http://localhost:50013/sapmc/sapmc.html?SID=NSP&NR=00&HOST=<hostname>.
    Can anyone help me? I read that many of you have solved this but, you see, I do not understand what you have done.

    Setting icm/host_name_full to <hostname>.domain.ext in rz10 in profile NSP_DVEBMGS00_<hostname> means:
    1) I can no longer see my web dynpro view layout in se80 - instead of the view layout I get a browser screen that says the page cannot be displayed;
    2) I get the same browser screen saying the page cannot be displayed when running the wd application test.
    If I remove that parameter in rz10 then:
    3) I can see and work with my view layouts in se80;
    4) I get a 500 rabax state error when I do the wd application test;
    5)  I can do a successful wd application test by changing the url manually in the browser from <hostname>:8000 to localhost:8000 ...  as in
    http://wiki.sdn.sap.com/wiki/display/BSP/FullyQualifiedDomainName(FQDN).

  • Itunes will not install as IE link "cannot display web page"

    I have been having problems with downloading podcasts and iTunes updates. So I followed Apple support suggestions including removing and (trying) to reinstall iTunes. However every time I hit the link for the download it takes me to a small pop up window with the address shown below, which does not load and tell me that "Internet Explorer cannot display the web page"
    Arrhh Help anyone?!?
    http://appldnld.apple.com/iTunes10/061-8246.20100901.Zxsew3/iTunesSetup.exe

    System: Win7x64
    Turn off ZoneAlarm.
    “Run as administrative” Firefox.
    I then went to the following install page which works:
    http://www.adobe.com/software/flash/about/
    It installed.
    The following install page does not work:
    http://get.adobe.com/flashplayer/
    The following thread discusses the problem with http://get.adobe.com/flashplayer/ download.
    Install Flash Plugin Manually in Firefox on Vista
    With so many Firefox users, Adobe needs to fix the http://get.adobe.com/flashplayer/ download for Win7 users.

  • Having problem with gmail smtp server.  Since going to google 2-step, and entering 16-digit code in gmail account, I can receive mail on my iMac, but cannot send.  What do I do?

    Having problem with gmail smtp outgoing server.  Since going to google 2-step, and entering 16-digit code in gmail account, I can receive mail on my iMac, but cannot send.  I keep getting an error message that Mail "Cannot send message using Gmail (my assigned name) server."  What do I do?

    Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
    You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google.

  • TS2755 I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

    I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

    Hi there
    I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
    Delete texts from both old number and new
    Delete any call logs including these numbers
    Delete old number from contacts
    Delete new number from contacts
    Restart device
    Send text to the new number directly (do not save as contact)
    Once the text sends successfully, you can then save as a new contact
    I hope this helps!
    Charise

  • I can receive email on iphone 4s, but cannot send an email although my server is configured correctly. any suggestions

    I can receive email on iphone 4s, but cannot reply or send an email although my server is configured correctly. any suggestions?

    iOS:Unable to send or receive mail http://support.apple.com/kb/TS3899

  • I receive email on my computer but cannot receive on my IPad air. Both have the same email address???

    I receive email on my computer but cannot receive on my IPad air and they both have the same email address???

    Hello bentley1212,
    The article linked below details a number of steps, such as removing and re-adding the account on your iPad Air, that can help restore your iPad Air's ability to receive e-mail.
    Get help with Mail on iPhone, iPad, and iPod touch
    http://support.apple.com/kb/TS3899
    Cheers,
    Allen

  • Can receive, send new and forward but cannot reply or reply all in mail all

    I'm using Tiger 10.4.11 and am suddenly experiencing a problem with Mail. I can receive emails and send new but cannot reply or reply all. When I click either the reply or reply all button, nothing happens, not even the spinning ball of death. Have tried the dropdown menu and the keyboard shortcut but same issue.
    Anyone else experienced the same problem or know how to fix this please?

    Ms. Gibbs, welcome to the discussion groups!
    Mail accesses Address Book to make sense of addresses, etc., whether or not you have anything in Address Book. When you start Address Book, are there any problems?
    Another thing to try after that, is kind of a "standard Mail fix to try": rebuild the Envelope Index.
    To do this, quit Mail. Then in Finder, find ~/Library/Mail/Envelope Index and move it to Trash. (~ is your Home Directory.) Then start up Mail. It will say something about importing mail... it is just rebuilding the Envelope Index file.
    -fred

  • I receive emails on my ipad but cannot send emails. any ideas?

    i receive emails on my ipad2 but cannot send emails. any ideas? lindafromaz

    Just a correction of Radiation Mac message:
    You apparently Do have an Incoming POP or IMAP server set up (SMTP being only to send emails, not to receive).
    Can you describe the settings you entered?
    - What type of mail account (Gmail, Yahoo, Pop, ...)
    - Are all the info properly filled (you can share them, but make sure to remove email/login/password for security)
    - Is your email provider requiring a secure connection to the SMTP? Did you configure it properly?

  • HT1430 I receive emails on my ipad2 but cannot send them

    I receive emails on my ipad2 but cannot send them

    Hi Scelan,
    This article has some troubleshooting steps for difficulties sending email:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    I hope this helps! Cheers,
    - Ari

  • IE + SVG = "Cannot display XML page" ?

    Dear friends,
       I am from Taiwan.  I have a question about SVG display on IE. 
       I have a very simply SVG file as the following code.  I installed Ferdora R12 with apache web server (192.168.0.8) inside my company.
    I installed Tomcat 6.0 on my PC(192.168.0.100, window 7 with IE8.0).  I put this SVG file on Fedora, and I can see the vector graphs through
    Chrome and Firefox, but not IE(already installed SVG viewer, with the error message as following).  I put this SVG file on my PC, I can see the vector graphs by IE, Chrome and Firefox through Tomcat or opening file directly. I even put this SVG file on the web server of my company, and vector graphs can be displayed well through all of IE, Chrome and Firefox.
      The problem seems only happen in the situation "Fedora R12 + IE".  Do you have any idea of this problem?  I really need your help.
      Thank you.
    ======= Code =============
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.//EN"
    "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
    <svg id="svg00" version="1.1" xmlns="http://www.w3.org/2000/svg" >
    <svg id="svg01" x="0" y="0" width="654.1" height="654.1" version="1.1" xmlns="http://www.w3.org/2000/svg"
    xmlns:xlink="http://www.w3.org/1999/xlink">
        <a xlink:href="http://www.w3.org//Graphics//SVG//Overview.htm8">
            <rect x="10" y="10" width="100" height="30" rx="10" ry="10"
                  style="fill:lightgrey"/>
            <text x="30" y="30" font-size="12">Click here</text>
        </a>
        <a xlink:href="http://www.ibm.com//developerworks/">
            <circle cx="100" cy="100" r="50" style="fill:grey"/>
            <text x="80" y="100" font-size="12">Or here</text>
        </a>
        <a xlink:href="http://www.ibm.com/" target="new">
            <polygon
                  points="60 160,165 172,180 60,290 290,272 280,172 285,250 255"
                  style="fill:dimgrey"/>
            <text x="160" y="200" font-size="12">Or even here</text>
        </a>
    </svg>
    </svg>
    ==========================
    The error message is in Chinese, but I translate it as possible as I can.
    ====== Error message ==========
    Cannot display XML page
    Cannot use style table (or form) to view XML input. Please correct this problem and reload this page, or try again later.
    Unidentified error with processing resourse
    There is something wrong with 'http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd'
    =============================

    Hi,
    The string is not correctly formed ( a quote and a concatenation ) :
    Your url :
    v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port||')||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
    The Correction :
    v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port)||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
    Hope it helps
    Mohamed Dadi

Maybe you are looking for