Receive the SNMP Traps raised by SNMP Device

Hi,
I want to monitor my SNMP Enabled Switch in my Network, How can i receive the SNMP Traps raised by SNMP enabled Switch in my network.
Any one monitoring Network switch using OEM. Please help me on how can u create plug-in for SNMP enabled device monitoring.
Thanks in Advance...
YJR

Hallo YJR,
there's a whitepaper released and linked on the extenisibility page, here's a direct link:
http://www.oracle.com/technology/products/oem/extensions/receivelet_plugin_wp.pdf
Hope that helps.
Best regards,
Robert

Similar Messages

When installing itunes I received the following error "service Apple Mobile Device failed to start, verify you have sufficient privileges to start system services"

when installing itunes I received the following error "service Apple Mobile Device failed to start, verify you have sufficient privileges to start system services"

Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
You're not alone buddy.
Frustrated.

During the latest iTunes download I received the following error: Service '(Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.

During the latest iTunes download I received the following error: Service '(Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.

Please Note I am the system Administrator

I receive the error "axError.gifSorry, your device does not meet the system requirements that are needed to support BlackBerry App World

Hi My name is Tibor Madarasi i purchased a Blackberry 8900 brand new i can't install app world i instaled the updates for this phone (v4.2.0.85)still can install app world i receive the error "axError.gif Sorry, your device does not meet the system requirements that are needed to support BlackBerry App World." I'm using O2 network in London UK Please advice me Regards
Message Edited by MichelleK on 06-15-2009 09:53 AM

ffbizz wrote:
I hate this bold 9700 series 2 no carrier and find it to be a pathetic product backed up by even more pathetic support so I have decided to use it as a torch. There is an app for this but it requires app world first. Are you trying to say that I MUST have a carrier and they will resolve this issue but otherwise RIM cannot do anything about their own product?
Hello and Welcome to the Forums!
We are so sorry that you are having so many difficulties. While many experience the same (a search here will reveal that fact), there are also many who have very positive experiences with their BB. Not every device is suitable for everyone -- which IMHO is why there are so many choices.
In addition, but for AppWorld, front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
As to AppWorld Support (beyond what we volunteer to provide in these forums), that is available via this portal:
https://www.blackberry.com/CSOHelp/index.do?ft=generic
If you choose to submit to them in this manner, then please use, in the "Please select a component:" field, the AppWorld Billing/Payment selection. Any other selection will simply route you back anonymously to these public forums.
As to your question, RIM and the carriers both participate in AppWorld. My suspicion is that the carriers get a portion of the costs for the apps that are vended via AppWorld -- but that's just my suspicion. Hence, the use of AppWorld indeed requires a carrier (and, indeed, the proper data plan level from them).
But, AppWorld is merely a portal, vending apps that are (for the most part) developed by others. As such, it is not the only portal in the world for BB apps. There are a few, I think, apps that are exclusively vended via AppWorld...but I think that number is rather small. Consequently, if you desire an app that will allow your BB to function as you desire, you should seek out alternative vending portals. There are plenty.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is it possible to obtain a report from Ciscoworks LMS3.1 to detail the SNMP configuration of all devices?

I am about to update/standardize to secure the SNMP configuration for all devices in the network utilizing Ciscoworks.
There is likely to be variations amongst the devices. Therefore, I would like to generate one report for all the devices, capturing the SNMP configurations, is this possible?
I know how to complete the work afterwards but am struggling to produce a meaningful report that I can use to build my tasks from.
I am trying to achieve this using a particular 'role based' account via ACS, so it is possible that I don't have the permissions with this account at present which maybe why I'm not able to do it.
Thanks!

Getting the SNMP trap community string is not trivial. The reason for this is that anything which shows the configuration will have this field starred out. You can get to the value, but not in a report-like fashion. You can, however, search the archived configs under RME > Config Mgmt > Archive Mgmt > Search Archive. Assuming you know the SNMP trap receiver IP, you could search on:
snmp-server host x.x.x.x old-string
That would show you all devices that still had the old community string.
If you need to force RME to get the new config data, you can simply schedule a Sync Archive job under RME > Config Mgmt > Archive Mgmt > Sync Archive. Of course, if you made the changes outside of LMS, you will need to manually update DCR with the new community string.

After upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

after upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

How can i use the SNMP and TCP/IP together in Labview?

I want to use the SNMP and TCP/IP together in the Labview to communicate between the two computers, If anyone know about it , please write back.
Santosh Chavan
IIT MADRAS.

You can use LabVIEWs UDP functions to communicate with SNMP devices. The tedious part is converting the MIB information into the required hex message.
There is also a problem in using the UDP functions on port 161 (default SNMP port) if the Windows SNMP services is running.

How do I restart the SNMP agents with the original command line options?

I'm creating an application that changes the SNMP trap target configuration files and then restarts the SNMP agent. I'm currently working with the mibiisa agent. I want to make sure that I restart the service with the new trap targets but with the original command line options. How can I restart the mibiisa service with the same command line options that it originally loaded with?

It is not "Network Time" that is the problem, but actually "SystemStarter." SystemStarter is an interim kludge to enable the work or the old StartupItems until they can be converted to LaunchDaemons or LaunchAgents controlled by launchd. Launcd calls SystemStarter to launch all the unconverted StartupItems. ntpd is now under the control of launchd directly.
Launchctl is the command to load and unload the plist files, but I don't think it has a mechanism to restart a daemon.
There are start and stop commands in launchctl, but the man page indicates that they are for debugging purposes.
I also imagine you could just kill the ntp daemon and let it restart with new settings. It is most likely set to "keepAlive" so that it will automatically restart.

Java Exception when attempt to start the SNMP agent

Hi,
I require to start the SNMP agent in Solaris 2.6 running Web Logic 5.1. Upon entering
the command :
$ java weblogic.SNMPAgent, it is asking me for the password , and I gave the same.
The system is
generating a Java Exception given below:
Exception in thread "main" com.adventnet.snmp.snmp2.agent.AgentRuntimeException:
Failure in opening SnmpSession, errstat: 0, errvalue: 0
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.RuntimeException.<init>(RuntimeException.java:47)
at com.adventnet.snmp.snmp2.agent.AgentRuntimeException.<init>(AgentRuntimeException.java:63)
at com.adventnet.snmp.snmp2.agent.SnmpAgent.addClientAndOpenSession(SnmpAgent.java:801)
at com.adventnet.snmp.snmp2.agent.SnmpAgent.restartSnmpAgent(SnmpAgent.java:939)
at com.adventnet.snmp.snmp2.agent.SnmpAgent.restartSnmpAgent(CompiledCode)
at com.adventnet.snmp.snmp2.agent.SnmpAgent.setPort(Compiled Code)
at weblogic.management.snmp.agent.WebLogicAgent.init(Compiled Code)
at weblogic.management.snmp.agent.WebLogicAgent.startup(WebLogicAgent.java:377)
at weblogic.SNMPAgent.main(SNMPAgent.java:25)
Given below is the file <startSNMPAgent.sh> and it's central contents:
$JAVA weblogic.SNMPAgent -password pbgst -serverURLs t3://localhost:7001 -trap
Destinations localhost:162
The classpath settings are correct and as per documentation.
There are SNMP agents also running in the machine which have been started by default
by Solaris,
doing a ps -ef | grep snmp shows:
root 556 1 0 Jun 23 ? 0:00 /usr/lib/dmi/snmpXdmid -s sunhyd01
root 516 1 0 Jun 23 ? 0:00 /usr/lib/snmp/snmpdx -y -c /etc/snmp/conf
pbgst 28090 25879 0 17:01:37 pts/32 0:00 grep snmp
I tried to start the SNMP agent on a diff. port and specified the same in the
.sh file and also changed the
trap Destinations port ---- it still generates the same exception.
Please do try to resolve this problem for me, as the project is in production
phase.
Thanks for all help beforehand.
Baivab
P.S. How can I obtain the id for WebSupport center, as we have using WL licensed
product
recently purchased in 3 nos.

Hello,
way back we had the same problem and the reason was, that the path
names with the server instances were to long
(/opt/wlsroot/wlsInstances/axsExpert.SwissAir/S_243_7001 ->
/opt/wlsroot/wlsInstances/axsExpert.SAir/S_243_7001). But this was
with WLS 5.1 SP8.
Regards
Wolfgang Becker
Atraxis
On 9 Jul 2001 23:02:29 -0800, "Baivab Mitra"
<[email protected]> wrote:
>
Hello Michel,
Thanks for the reply. As you may have noticed, that the SNMP agents which are
already running, the owner is <root>. These services are required and I do not
have or I can not obtain the password to start/stop the same. As such, the only
option which I have is to start the weblogic-specific SNMP service in a different
port. Question: In the parameters, I specified : <snmpPort 1600 trace Destinations
1601> I am still getting the same error. What else is required and/or how do I
proceed to start the same service?
Thanks for your help beforehand,
Baivab
"Michael Girdley" <----> wrote:
It looks like another SNMP agent has already bound to the port.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Baivab Mitra" <[email protected]> wrote in message
news:[email protected]...
Hi,
I require to start the SNMP agent in Solaris 2.6 running Web Logic5.1.
Upon entering
the command :
$ java weblogic.SNMPAgent, it is asking me for the password , and Igave
the same.
The system is
generating a Java Exception given below:
Exception in thread "main"com.adventnet.snmp.snmp2.agent.AgentRuntimeException:
Failure in opening SnmpSession, errstat: 0, errvalue: 0
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.RuntimeException.<init>(RuntimeException.java:47)
atcom.adventnet.snmp.snmp2.agent.AgentRuntimeException.<init>(AgentRuntimeExce
ption.java:63)
atcom.adventnet.snmp.snmp2.agent.SnmpAgent.addClientAndOpenSession(SnmpAgent.j
ava:801)
atcom.adventnet.snmp.snmp2.agent.SnmpAgent.restartSnmpAgent(SnmpAgent.java:939
atcom.adventnet.snmp.snmp2.agent.SnmpAgent.restartSnmpAgent(CompiledCode)
at com.adventnet.snmp.snmp2.agent.SnmpAgent.setPort(CompiledCode)
at weblogic.management.snmp.agent.WebLogicAgent.init(CompiledCode)
atweblogic.management.snmp.agent.WebLogicAgent.startup(WebLogicAgent.java:377)
at weblogic.SNMPAgent.main(SNMPAgent.java:25)
Given below is the file <startSNMPAgent.sh> and it's central contents:
$JAVA weblogic.SNMPAgent -password pbgst -serverURLst3://localhost:7001 -trap
Destinations localhost:162
The classpath settings are correct and as per documentation.
There are SNMP agents also running in the machine which have been startedby default
by Solaris,
doing a ps -ef | grep snmp shows:
root 556 1 0 Jun 23 ? 0:00 /usr/lib/dmi/snmpXdmid-s
sunhyd01
root 516 1 0 Jun 23 ? 0:00 /usr/lib/snmp/snmpdx -y-c
/etc/snmp/conf
pbgst 28090 25879 0 17:01:37 pts/32 0:00 grep snmp
I tried to start the SNMP agent on a diff. port and specified the samein
the
sh file and also changed the
trap Destinations port ---- it still generates the same exception.
Please do try to resolve this problem for me, as the project is inproduction
phase.
Thanks for all help beforehand.
Baivab
P.S. How can I obtain the id for WebSupport center, as we have usingWL
licensed
product
recently purchased in 3 nos.

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram. i receive the error 12 This device cannot find enough free resources that it can use. please help

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram.
i receive the error 12 This device cannot find enough free resources that it can use. please help

1. You have placed problem in wrong forum, or use different Windows operating system
2. Double check your resources, namely in Disk manager. What is free space on HDD?
Regards
Milos

When trying to sync my iPhone with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges??

When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges?

Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H.

HT201210 I am trying to update my iPhone but it seems that I have to many photos and music because I received the following message: The iPhone could not be updated; this device is not elegible for the requested build. Does anyone know how to fix this?

I am trying to update my iPhone but it seems that I have to many photos and music because I received the following message: The iPhone could not be updated; this device is not elegible for the requested build. Does anyone know how to fix this?

You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.

Does LabVIEW support the SNMP (Simple Network Management Protocol)?

I looked at LabVIEW 2014 online help for some info on SNMP.
A problem was posted in 1996 and updated in 2008.
Does LabVIEW Support the SNMP (Simple Network Management Protocol)?
http://digital.ni.com/public.nsf/allkb/4CD3625A939A77DE852564050047D3BD
This was addressed to LabVIEW version 4.
What version are we up to now?
Version 14?
One solution offered was to get the SNMP VI from Viodia.
Why should I have to spend another $1,000 for a VI from Viodia after spending $5,000 for LabVIEW Professional?
Come on National Instruments, offer up SNMP to go with your professional package.
There seems to be a lot of chatter about SNMP on the forums.
I’m sure a lot of customers would be happy to have an official LabVIEW VI for SNMP.

I find it unreasonable to expect that LabVIEW supports out of the box every network protocol that has ever been invented under the sun. You may find SNMP to be the most important protocol on the world but for most programmers it is a niche protocol that they may have heard of but never will happen to come across in their applications. It's in fact pretty low level for a very specific purpose of managing network connected resources.
On the other hand it is not rocket science either so can be implemented by someone with enough determination on top of the native network interface functions in LabVIEW. Is it a lot of work? Yes, you bet! Is it worth 1000 bucks! If you really need it and your own work hours cost anything more than a few cents per hour, most probably too! If you can live with an implementation that is supporting many but not all features of SNMP, the link on LAVAG is a very good and nice one.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Receive the SNMP Traps raised by SNMP Device

Similar Messages

Maybe you are looking for