Received a message after exiting from an online game.
this is my first time using my T400 to play an online game..however when i exited from the game..my desktop popped out a message..it says my resolution is not optimal..optimal resolution should be 1440 X 900..but my resolution was that..so what's the problem? i seem to always get that message when i exited from the game..any help would be appreciated..Thanks
Call them again and tell them you want a Refund. Send it back then Order another or something else.
EDIT:
Apple has a 14 day No Questions Ask Return Policy for full refund. Take advantage of it and return that system.
Similar Messages
-
Cannot receive text messages after switch from iphone
After more than 2 years on an Android, my family convinced me to try an iPhone. After one week, I decided to return my iPhone and go back to Android. Now I cannot receive text messages from anyone using an iPhone. It thinks I'm still using iMessage.
I have already talked with Verizon customer service and unregistered my number from both Messages and FaceTime via my computer. Please help! This is extremely frustrating!Appreciate the update plurrykid,
Knowing you are starting to receive them is good, but certainly we want you to receive all of them, not just random ones. I know it’s important to get them up and running as soon as possible. It will usually take Apple 24-48 hours to un-register you completely; if it has not been fully done, what you can try is resetting your Apple ID password here http://bit.ly/1kwc2va . Since you will be changing your password and the original device which still has iMessages on, will not be aware of the new password for them, it will revert to text messages. Let us know how it goes.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
How can I see my messages after restoring from backup?
I have 2.1gb of messages saved in my storage on my 4s but they're not in messages after restoring from backup.
How can I get all my messages back in my message app because I know they're their it's just a matter of getting them restored into the app.When you restored your phone from an old backup, it wiped ALL data from your phone and replaced it with the data from that backup. It's like your phone went back in time.
Your data that was on the phone before you did the restore is now gone forever. There is no way to get these data back. -
If only using wifi, will I still receive text messages and calls from non iPhone users?
If only using wifi (turning off Cellular Data) will I still receive text messages and calls from non iPhone users?
If you have cell service with a text plan, yes.
-
Experiencing issues sending/receiving MMS messages after updating to iOS 6
I, like so many others, have been experiencing problems sending/receiving MMS messages after updating to iOS 6. Other than that, I really do like the new update. I have an iPhone 4S with Verizon. I have been to Verizon, and the issue is not with my plan; it is definitely with the update. My friend updated her phone also, but her phone is just the iPhone 4. She does not experience these issues. Is Apple aware and trying to fix the problem? It is soooo frustrating! I cannot send/receive picture messages, nor can I send/receive group messages. --- Has anyone come up with a solution to fix it yet, or is it something that Apple will have to do?
Thanks in advance.I also am having the same problem. I can't send a pic to anyone who doesn't have iMessage. Also, I don't always get the alert when I have a new message. I never had this problem before I updated to IOS 6. I have AT&T & an iphone4. It's isn't jail broken. I've been reading forums for a couple weeks now and apparently it has something to do with the apn. And I don't know how or even if I can change it. Then I also read it might have something to do with a damaged SIM card. And it might have been damaged when we updated. But those are just theories.
-
Unable to send or receive text messages after updating iOS to 7.0.2
I am unable to send or receive text messages aftering updating to iOS 7.02. I have an iPhone 4S. I have run all the suggested troubleshooting still can't text. I have been to my carrier, AT&T, there is no issue with my account. AT&T suggested resetting the phone to factory defaults (thereby wiping it clean). I am trying to avoid that as I had issues with transferring data & contacts before. Any one have a work around?
Try this iMessage workaround
Look for a fix by Apple by the end of the week..... -
I dont receive text messages after the iphone update
after i updated my phone software on my iphone 4, i am not able to receive text messages from anyone. and when i send one like regular, it says that the inbox is full, which is has never said that before. any idea when it is doing that?
Are you having trouble with SMS messages (green)? Or iMessages (blue)? Or both? What happens when you try to send a message? What troubleshooting steps have you tried? Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? Have you contacted your carrier to make sure everything is ok with your account?
-
How to receive emails i already read from gmail online
I cant receive the emails I already read from gmail online, maybe because they have been marked as read. Cant mac mail download emails including both read and unread? Thx!
You can either set Gmail to automatically forward any mail you get to you IP email account so everything gets downloaded when you do a 'get mail'. Or, you can set up POP or IMAP settings within gmail for your IP account, set up a new account in Mail's prefs and tell it to bring in Gmail's messages, so when you do a 'get mail' everything comes down.
-
Redirecting control to portal page after exiting from SAP R/3 transaction
Hai,
In my portal Top Level Navigtion, I have two Option, "HOME", "HR FUNCTION".
When a user login to portal by default the first node "Home" is opened and its content is opened in detailed navigation. Then the first content from detailed navigation which is URL iview is opened on the content area.
When a user opens the second node "HR Function", in the detailed navigation, SAP transcaction IViews are shown. When a SAP transaction IView is clicked, its content are opened in content area. After the user finished working with that transaction, he/she is exiting from the transaction by clicking the "Exit" button. This action, makes the content area to show as blank screen.
Is it possible to show the URL ivew from the "Home" menu when ever the control is coming out of SAP transaction IView. In otherwords in need to fill the blank screen with URL Iview. I don't know from where and how to call this URL IVIEW.
Please let me know how to do this.
Thanks & Regards,
H.K.Hayath Baha.Hai Anant,
Thanks for the suggestion. Can you tell me where I have to give the code.
Regards,
H.K.Hayath Basha. -
IPhone 5c - can't receive group messages after updating to IOS 8.0.2
I have an IPhone 5c and I updated to the IOS 8.0.2 yesterday afternoon and now I can't receive group messages. I have rebooted my phone and reset my network settings along with turning IMessage off & on, turning group messaging off & on.
Does anyone know of a fix for this?Ok. Just got off the phone with Applecare. We finally figured out what my problem was. Before iCloud, I had a .mac account. So, my phone had two email accounts, 1. iCloud 2. mac.com accounts. Applecare had me delete completely both accounts from my phone, leaving no mail accounts at all. Then I added a new iCloud account. Put in my email address and password, then everything worked from there. Sounds simple. Good luck to the rest of you. Hope it's the same fix. And a big "thank you" to Xavier at Applecare.
-
We have a Mac Mini server running Lion Server.
We bought a new Mac Mini server and installed OS X Mavericks and the Server app onto it.
We then ran Migration Asssitance on the Mavericks machine and migrated from the Lion server in target disk mode.
The migration seemed to run OK and all the user accounts seem to be working, however users are reporting that there are no email messages in their mailboxes.
Confirmed this behaviour by adding their accounts to mail (via IMAP) on a separate laptop.
Did we miss something? Is there an extra step to move the email service data?
Any insights would be grately appreciated.
Many thanks, Tom.Hey tomgallagher!
You can use this article to help you troubleshoot the functionality of these Mail accounts if they are not functioning properly:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
If your saved emails did not come across properly in the Migration, you can always export the mail from the old computer and import it into the new computer manually:
Lion Mail: Export mailboxes
http://support.apple.com/kb/PH4811
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Unable to send or receive text messages after apply s/w update on Q10
After apply software release 10.1.0.4181 (size 6mb) on my Q10, I can no longer send or receive text messages, pls help. At first I thought the text messages were only collapsed, but I am unable to send, receive or open any previous chat. I have rebooted the device multiple times, including removing the battery. When trying to do a text message, system seems stuck on the last message received yesterday, and am unable to open this chat session, reply, compose. I cannot compose for any contact, nor able to receive any text messages. PLs help !!
Solved!
Go to Solution.I removed my battery again, this time left out for 5 minutes. SMS is now working again. (previously approx 2 min)
However, the problem I was experincing, I have had before, where I cannot send an sms message. I believe I may have hit a hot key and basically does not allow you to send a message. Typically I reboot at this point and sms works again. I will try your new os option after I verify all is working properly again. Thank you for your help. -
I cant send or receive photo messages after update i0s 6
I am recently made an update to my iphone 4s, after that i can't send or receive photo messages, i need to know if someone has the solution, Thanks
I have the same problem. :(( I upgraded my iPhone 4S and now I can't receive emails or send and receive texts/photos. I have checked settings to make sure MMS is on and it is. There's a two week waiting period to make an appt at 4 local apple stores. Can anyone help?? Thank you.
-
Error message after Upgraded from 2.53ghz (533 FSB) to 3.2ghz (HT)
Hi! everyone,
As you can see i'm a newbie on this board, however I've frequently visited here once in a while. Anyway, the problem I currently have after I upgraded my cpu from 2.53 ghz to 3.2ghz HT (Northwood) is that I not very often (few times so forth since monday) see this error message after reboot my pc :
***Message starts here***
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error restart your computer. If this message appears again, follow these step:
Run system diagnostic utility supplied by your hardware manufacturer. In particularly run a memory check and check for faulty or mismatched memory, try changing video adapters.
Disable or remove any newly installed hardware or drivers....etc.
Technical information
***STOP: 0x0000007F (0x00000008, 0xF7806d70, 0x00000000, 0x00000000)
....................................... ........etc.....
****Message ends here****
As i stated before I've never seen this message before the upgrade. So, here is my configurations:
BEFORE
875P NEO-LSR w/ BIOS v. 2.0
2.53ghz 512 FSB CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb on channel 1 - 512mb on channel 3) (KINGSTON pc2700 module)
CURRENT
857P NEO-LSR w/BIOS v. 2.0
3.2ghz 800 FSB 512mb (L2 cache) CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb stick on channel 1 - 512mb stick on channel 3) (KINGSTON pc2700 module) *
* may be this causes this error message because as I read it on the discription page of the 875P NEO-LSR that it will only support DUAL channel (PC3200 type) with HT CPU. So, i suspect this may cause the problem but I havent try to rearrange my memory to one channel (1 x 2) yet.
I will greatly appreciate it if someone in here who may has experienced it before or know what all this means. Please adviseThanks for your advise bejon2000.
Here is my situation, I just freshly installed Windows XP Pro w/SP2 prior to this cpu upgrade ...I did the os last weekend and upgraded the cpu the day or two after which is monday of this week. So, can I just do the BIOS update now with the os already inplaced ??? I assum the aswer is yes, however I just wanted to confirm before I do it, you know
I've SiSoftware Utilities 2004 installed on the system as well, and after I did the Performance Tune-Up in SiSoftware ...This is what I got
SiSoftware Sandra
Display on Screen
Device Type : Desktop/Notebook
System Summary
Analysing...
Tip 2546 : Large memory modules should be ECC/Parity.
Finished Successfully : Yes
****Mainboard Information
Analysing...
Power / Aux Temperature : 59.0°C / 138.2°F
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2505 : System does not support memory error detection. Some memory errors may go unnoticed.
Warning 2506 : System does not support memory error correction. System will stop if memory errors are found.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2518 : Mainboard temperature is too high.
Finished Successfully : Yes
***CPU & BIOS Information
Analysing...
Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed.
Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate.
Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate.
Tip 212 : System BIOS : BIOS can be shadowed so check whether it is.
Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed.
Finised Successfully : Yes
APM & ACPI Information
Analysing...
Notice 224 : SMBIOS/DMI information may be inaccurate.
Finished Successfully : Yes
PCI, AGP, CardBus Bus(es) Information
Analysing...
Finished Successfully : Yes
Video System Information
Analysing...
Tip 319 : Primary Display Driver (display) : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : Primary Display Driver (display) : Remove the desktop wallpaper to save memory and improve performance.
Tip 319 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : Remove the desktop wallpaper to save memory and improve performance.
Finished Successfully : Yes
Windows Memory Information
Analysing...
Finished Successfully : Yes
Drives Information
Analysing...
Warning : 1.44MB 3.5" (A:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : CD-ROM/DVD (F:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : Removable Drive (G:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Tip 1821 : Removable Drive (H:) : Label (name) drive.
Finished Successfully : Yes
Ports Information
Analysing...
Warning : Communications Port (COM1) : Port in use. [5]
Finished Successfully : Yes
Keyboard Information
Analysing...
Finished Successfully : Yes
Mouse Information
Analysing...
Finished Successfully : Yes
Sound Card Information
Analysing...
Finished Successfully : Yes
Printer and Fax Information
Analysing...
Tip 402 : PaperPort Color : Print quality may have been set too low. Check settings.
Finished Successfully : Yes
MCI Devices Information
Analysing...
Finished Successfully : Yes
Windows Information
Analysing...
Tip 1300 : Enter your company name or "Home" instead of "Unknown".
Finished Successfully : Yes
WinSock Information
Analysing...
Finished Successfully : Yes
Processes Information
Analysing...
Tip 1601 : 6. tinhbuon0e - ********* - Winamp [Stopped] : Program consumes a large amount of memory.
Tip 1601 : Adobe Photoshop - [main.psd @ 90.9% (Layer 4, RGB/8)] : Program consumes a large amount of memory.
Tip 1601 : Adobe ImageReady : Program consumes a large amount of memory.
Finished Successfully : Yes
Modules Information
Analysing...
Finished Successfully : Yes
OLE Information
Analysing...
Finished Successfully : Yes
DirectX Information
Analysing...
Finished Successfully : Yes
Network Information
Analysing...
Finished Successfully : Yes
SCSI Information
Analysing...
Warning 2600 : WDC WD80 0JB-00CRA1 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : Maxtor 6 Y160P0 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : TOSHIBA DVD-ROM SD-M1712 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : PLEXTOR DVDR PX-716A : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Finished Successfully : Yes
Font Information
Analysing...
Finished Successfully : Yes
CMOS Information
Analysing...
Finished Successfully : Yes
OpenGL Video Information
Analysing...
Finished Successfully : Yes
Services Information
Analysing...
Tip 2130 : Alerter : Service may be disabled on Home/Professional OS version.
Tip 2130 : Error Reporting Service : Service may be disabled on Home/Professional OS version.
Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version.
Tip 2130 : Removable Storage : Service may be disabled on Home/Professional OS version.
Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version.
Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version.
Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version.
Tip 2130 : Windows Image Acquisition (WIA) : Service may be disabled on Home/Professional OS version.
Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version.
Finished Successfully : Yes
ATA/ATAPI Information
Analysing...
Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety.
Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired.
Finished Successfully : Yes
Data Sources Information
Analysing...
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Tip 3001 : ODBC Information : ODBC driver support old; should support ODBC 3.52 or later.
Error : Tables/Views : No tables/views found.
Error : Procedures/Functions : No procedures/functions found.
Finished Successfully : Yes
Hardware IRQ Settings
Analysing...
Finished Successfully : Yes
DMA Settings
Analysing...
Finished Successfully : Yes
I/O Settings
Analysing...
Finished Successfully : Yes
Memory Resources
Analysing...
Finished Successfully : Yes
Plug & Play Enumerator
Analysing...
Finished Successfully : Yes
Performance Tune-up Wizard
Finished Successfully : Yes
There are actually some notices on MAINBOARD INFORMATION & CPU & BIOS INFORMATION, however I'm not sure what exactly they mean though.
******UPDATED*****
here is the last part of the error that i described in my first post, I just saw it again right now
****STOP: 0x.......
**** sysaudio.sys - Address F6EAA481 base at F6EA7000, Datestamp 41107F1a
Beginning dump of physical memory
Dumping physical memory to disk: (counting from 1 to 99 then it shut down the computer) -
I have tried to download iTunes five times this afternoon to my new computer using both Fire fox and Explorer. Each time after it downloads I receive a message stating that an error has occured before the installer was able to be completed. I turned off the pop-up blocker like support suggested and I am running Windows 8.1, does anybody know how to fix this?
Follow the instructions of tt2 given in: https://discussions.apple.com/thread/5822086
Maybe you are looking for
-
Quantity field conversion problem in SAP script
Hi experts, I have problem with sap script quantity field conversion. In purchase order the actual value of field( MDPM-ERFMG) is 3,500. But in Print preview it is showing only 3.5 Any one Please help me in this problem thanks in advance murali
-
Confirmation-Related Invoice Verification
Has anybody had the issue that when using SRM 5.0 (extended classic) a purchase order falls into "error in process" because the Confirmation-Related Invoice Verification has been checked on by SRM even though the vendor master never had this GR based
-
Ciao! Sto cercando il link diretto per scaricare iOS 4.3 per iPhone. Qualcuno in aiuto? Sono troppo impedita!! GRAZIEEEE! Lu
-
sir i purchased i pad air in uae country miss i con face time i come back to india how to get i con face time
-
Photoshop CS5 stops installing at 18%
I believe there was a file missing the helps the app to install.