Received error message, this ipod doesn't support this video format...
The last tv shows I bought from itunes won't go on my ipod touch (1st gen). I'm getting an error message, this format not supported by this ipod. NO ONE is able to help me with this..any ideas?? I've reloaded all my software, etc. restored my ipod...
Can you play them in itunes?
Also you should have gotten 2 versions. One HD (high def) and the other SD.
iPods can only use the SD version, since they don't have high def screens.
Similar Messages
-
Trying to convert Pages to Word doc, but keep getting this error message: TypeError: Object doesn't support property or method 'invalidate' JavaScript console contains more details. Any ideas on how to get past this?
Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.
-
I'm trying to send music, scores and audio, as e-mail attachments, with a copy to my e-mail address. Whether I use .mus, .pdf, or .mp3, the error message says Preview doesn't recognize the file format. I haven't seen Preview, or had any problems, before now. Thanks for any suggestions.
Hi,
Firstly, your country is detemined by several factors, including your phone's regional settings, your SIM card and your NokiaAccount settings, if you used this phone whilst abroad then you may need to check that your regional and account settings are up to date since you have arrived in Canada.
For services like Gigs, you should also ensure that the MixRadio app has access to your phone's GPS location as well as the main location being on in the phone settings. To check this, as well as Location being turned on in the phone settings, in MixRadio itself go to Settings>Location>On:
The concern with favourites may also be related to location, if the music from certain artists is available in Canada but not where the service might think you are, availability of content may vary from region to region.
If all settings in both the phone, your Nokia Account and the MixRadio app are correct, we may have to investigate deeper.
It is impossible to comment on your camera without seeing it, you cold have the phone checked by Nokia Care locally, but of course if it was supplied in Europe it will be covered by the European Limited Warranty which is not valid in Canada.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button. -
Receive error message, "The iPod cannot be synced. The required disk cannot be found. This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7. This is getting frustrating. I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once. I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod. I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad. This is the only device that has this issue.
I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
Re: 30gb 5th gen. Probs syncing.
Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
Try running a disk check out the iPod using the tools provided by windows.
To do this:
1. Plug in your iPod and close iTunes.
2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
3. Go to the Tools tab. Under "Error Checking", click Check Now.
4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
B-rock -
After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?
To delete, tap "Edit" (tap to enlarge image)
-
"We could not complete your purchase. (This Game) doesn't support this computer's graphics hardware.
I have posted this question in the "App Store" support community, but received no response. Therefore I would like to try here to see whether someone has any knowledge about this, the original question as follows:
I have repeatedly tried to download a game from App-Store, but always receive the prompt: "We could not complete your purchase. (This Game) doesn't support this computer's graphics hardware.
I have been in contact with the game studio's support, and they say: "This issue has already been fixed and works fine on all computers except yours (mine)". The cause allegedly related to Yosemite 10.10.--.
I've apparently been left to my own devices and decided to try this community.
"This Mac" is a late 2012 iMac 27, 3,2 GHz intel i5 that runs Yosemite 10.10.2. With 1 TB Hybrid HDD, NVIDIA GeForce GTX 680MX 2048 MB and 16 GB ram, which according to Game Studio's is well within specs.
Is there anyone out there who know a way around this or should I just face it and get on with the rest of my life?
Please?Halonk wrote:
"We could not complete your purchase. (This Game) doesn't support this computer's graphics hardware.
Is there anyone out there who know a way around this or should I just face it and get on with the rest of my life?
There is no way around.
Best. -
Why am I receiving the following message when I try to move a song from my iTunes library into my iPod touch's music folder?
"The iPod cannot be synced. An unknown error occurred (13019)."
It was working just fine. Then all of a sudden this error message popped up.Try here:
iTunes: Error 13019 during sync -
I am receiving error message R6034, how do I fix this?
I am trying to access my itune and am receiving this error message R6034, which say s an application has made an attempt to load the C runtime library incorrectly, contact applicaton support team, Error 7 Windows error 1114. When I click on the icon for itunes it says I need to reload itunes, which I attempted, but still get the same error message. Can anyone help me with this?
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Reinstalled software - error message file too new to support this version of the application
program was not rendering files in the timeline so i reinstalled the program.
reinstalled software, tried to open project i was working on and error message read: file to new to support this version of the application.
reading the maunual in advance, had recommended updating software prior to installing the program....
what to do??? need to continue working on the project...You can't get it to upgrade to 4.01 (the latest/last version)?
Should be doable through Software Update, unless you have either moved or renamed the FCE app from its original installed position.
Also try using disk utility to fix permissions on your system drive and try the update again.
Often times when you re-install the software there are legacy files left over from the previous installation. this might be the problem.
Consider downloading FCS remover (free) from Digital Rebellion:
http://www.digitalrebellion.com/fcsremover/
and the re-installing your FCE software from disc and then trying the update.
MtD -
I don't have that problem on any other game, just on Frontierville, Facebook. If I refresh the page over & over for a long time it eventually loads. I've had this problem for two weeks.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033 (both on the mac/windows partitions (actually using a parallel to run Windows)), error message something similar to bootcamp doesn't support this Windows
So the question is am I doing something wrong? Should I just try and install windows 8 through my windows 7 partition and see if I can use the bootcamp 5.05033. Or do I solely have to use the bootcamp to install Windows 8? I'm not too familiar with bootcamp and how it runs.if you're using parallels and full bootcamp then you're making it 100% more troublesome for youself then it needs to be
bootcamp is running windows directly on the hardware this give full memory and cpu and 3d video game power
running windows in parallels is running a virtual machine where one can't run powerful games and the like but one can have it in a window and change fast between osx and windows
parallels as the only virutal machine (as far as I know) support not have the operating system as a file on the osx harddisk but can access a bootcamp parition as virtual machine but without the benefits bootcamps provides
it's a service parallels provide for those who want both to play games in normal bootcamp and sometimes use windows in a virutal machine
just install it like a normal virtual machine and you need not worry about bootcamp drivers and the likes
plus it would mean that the windows part would be a part of the timemachine bacup of osx
which it is not when it's in bootcamp -
I have CS5 and when I try to download a raw file from my Nikon 810 I get an error message saying this version of raw doesn't support this camera model. Yet I just updated CS5 online.
I do not use lightroom and I have a subscription so I can open all supported RAW formats. You will need DNG file for Your Camera's NEF files for use in Photoshop ACR version. You can open your NEF files in LR it seems so you could do all your raw conversion with Lightroom and save out Tiff files for processing in Photoshop. I do use lightroom for I do not need its library. Lightroom does not support layered files so lightroom is of no value to me. ACR UI is all I need having a second interface to Adobe Raw Conversion Engine would more annoyance than value to me.
-
I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?
This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express. -
After updating my Time Capsule, I received this message on my Airport Express: This version of AirPort Utility doesn’t support this base station." How can I fix this?
Per chance is your AirPort Express an 802.11g model? If so, you will need to use AirPort Utility v5.6 to administer it. However, this version will not install under OS X Mountain Lion without a workaround.
The following is one of those workarounds:
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder. -
I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem? The problem doesn't exist when I'm downloading apps for which I pay.
Hi,
See Here:
http://support.apple.com/kb/TS1276
From Here:
http://support.apple.com/kb/TS1424
Maybe you are looking for
-
QT 7.1.3 plugin doesn't initialise properly in IE7
Since installing IE7, I have had problems with the Quicktime 7.1.3 plug-in for Internet Explorer. The issue seems to be related to the IE7 security "enhancements" but I have not been able to find a solution. An example - if I click on a movie trailer
-
Get layout-position of a component
Hi! i have a frame applcation with two toolbars. they can both be dragged to a new position in the borderlayout with the mouse. it was'nt easy to have no problems with the layout-manager when they are set to a new position. now i want so save the ali
-
I am currently rendering a 2 minute movie in professional quality, but nothing seems to be happening at all- if I switch to best performance it is rendered in about 3 minutes- am I doing something wrong- I know it takes longer, but there's longer and
-
Can SQL*Loader Insert concatenated string into table
Hi All, I want to insert a column, whose format is "abc" + to_char(sysdate,'YYYYMMDD'), into temp table. How can I do it? Thank you in advance. Best Regards, Sheng
-
How do I copy a pdf into a word document.
I am trying to copy a pdf form that I got from the government and put it into a blank page in a word document. I thought I would be able to copy and paste but when I do it will only paste the 1st page of the pdf document and not the other 2 pages.