Received I5 online, now what do I do at home to get it working the right way

Received my IPh 5 at hme online purchase. After unpacking what should I do next to get the phone synced to me. Do I do a restore first?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
See:
* [[Troubleshooting extensions and themes]]

Similar Messages

  • I hit the wrong monitor refresh rate and now lost monitor picture.  How can I get back to the right refresh rate with no pic to view?

    I hit the wrong monitor refresh rate and now lost monitor picture.  How can I get back to the right refresh rate with no pic to view?

    Try this:
    Mac OS X 10.6 Help: If you changed your display’s resolution and now it doesn’t display a picture

  • Brand new Ipod touch.  we attached to the computer because we don't have wifi.  Now what.  We set up in ID in itunes.  The Ipod won't do anything, just shows itunes on screen but won't budge.

    Brand new Ipod touch.  We attached to the computer because we don't have wifi.  Now what?  We set up in ID in itunes.  The Ipod won't do anything, just shows itunes on screen but won't budge.

    To get iTunes to see your iPod:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • What is the right  way to display a table in Java web dynpro using a node.

    Hi experts,
      I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro.  In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to  show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
    Thanks and Regards.
    Vaibhav Tiwari.

    Please refer to my post.. you will get the answer
    Dynamic Table -  same data repeating in all rows
    Special care should be taken in designing the context for table attribute.
    The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
    Now coming to final solution :
    For designing a table in adobe interactive form you have consider following
    You have to design the view context upto three level, I am explaining you the properties
    PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
    TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
    TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
    TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
    Then under TableData value node, you have to put all your table attributes.
    This Value Node name can be anything but hierarchy should be same as I have mentioned above.
    Please try out these steps and get back to me if you have any doubt.

  • TS1367 my mac book air opens to the password but won't go any further it stop right there!  What soulh I do?  I am sure I have the right pass word!

    My Mac book air opens to m the password but won't go any further,  it stop right there!  what should i do?  I am sure i have the right password

    Here's an old fix for the problem. Don't know it applies now:
    Clearing Caches to Fix Login Problem
    You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
    Be careful. Some of these commands are dangerous, since you are going to be root.
    Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
    /sbin/fsck -fy
    Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
    /sbin/mount -uw /
    cd /Library/Preferences
    rm com.apple.loginwindow.plist
    rm com.apple.windowserver.plist
    cd /Library/Caches
    rm -r *
    cd /System/Library
    cd /System/Library/Caches
    rm -r *
    reboot
    Press RETURN after each command.
    This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
    If it isn't applicable in your version of OS X, then I suggest:
    Be sure you backup your files to an external drive or second internal drive because the following
    procedure will remove everything from the hard drive.
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
         Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
         the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Intellicast it does not load the way it did before. Now I just get a page with writing yet on Explpre it losds the right way

    I tried reinstalling Firefox but I get the same thing with Intellicast. I get a page with typed writing instead of a grafic page with the maps and 10 day forecast. I go to Internet Explorer and get the same intellicast.com page and it opens up the right way. what is the problem and can it be fixed. I never had this problem before with intellicast and have been using it for some time on firefox

    If it happens again the first try these basic steps:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • IWork - What's the right way to install a familiy license?

    I have bought a iWork familylicense. Now I try to install the software at the iMAc from my daughter. But I don't find the right way to do this. Who can explain the right process to install it? Thanks a lot for your ideas. RN

    Adobe list of properties and methods:
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/mx/controls/dataGridCla sses/DataGridColumn.html

  • What's the right way to delete an entire backup ?

    I've had two Macs doing wireless Time Machine backups to one Time Capsule.
    Question: I got rid of one Mac, and want to delete its backup entirely (but leave the other computer's backups untouched). What's the right way to do it?

    Bob Timmons wrote:
    Jespes, welcome to the discussions!
    Open your hard drive. Your Time Capsule icon should appear under the SHARED heading.
    Click on the Time Capsule and a folder will appear to the right.
    Double click the folder and you should see a xxxxxx.sparsebundle file for each computer that has been backing up.
    Click on the xxxxx.sparsebundle file that you want to delete to highlight it and then click the gear shaped icon just above. Select Move to Trash. (Do not drag the file to the Trash as this will not work).
    Be careful, as the file will be deleted instantly and you will not be able to retrieve it.
    many thanks!

  • What is the right way to move a directory to another drive?

    When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.

    Bazsl wrote:
    When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.
    That's something I just did successfully one hour ago...
    I suppose your are in the 'folder' view with full folder tree, not in the 'My folder' view which only shows the lower subfolder level recorded in the database.
    Do you try to move a folder with its subfolders ?

  • What's the right way to add a swipe handler to a DataGrid?

    H All:
    What’s the right way to add a swipe handler to a DataGrid?
    (Target = Android, AIR using Flash IDE)
    Adding a handler to the DataGrid works; but (as expected) it only works on  the datagrid itself. Like if you swipe on the background before rows are fully  added. Adding columns over the datagrid, prevents the datagrids’ swipe handler  from firing.
    Trying to add a swipe hander to the columns themselves, results in the  below error.
    //  Below code fails with
    //  1061: Call to a possibly undefined method addEventListener through a reference with static type
    //   fl.controls.dataGridClasses:DataGridColumn.  So ... DataGridColumn doesn’t support addEventListener...
    There must be a better way(?).
    Thanks
                import fl.controls.DataGrid;
                import fl.controls.dataGridClasses.DataGridColumn;
               // Works, but only on the grid itself; as when the rows do not  fill the space tor the datagrid.
                myDataGrid.addEventListener  (TransformGestureEvent.GESTURE_SWIPE, swipeGridHandler);
                var c1:DataGridColumn = new DataGridColumn("Notes"); 
                c1.width = 90;
                c1.cellRenderer = CenterAlignCell;
                c1.addEventListener (TransformGestureEvent.GESTURE_SWIPE,  swipeGridHandler);

    Adobe list of properties and methods:
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/mx/controls/dataGridCla sses/DataGridColumn.html

  • What is the right way to connect the adapter to my macbook when charging?

    what is the right way to connect the adapter to my macbook when charging.
    is it connect the magsafe connector first before plugging the adapter to the outlet? or the way around? or both ways will do?
    what if i'm using a surge protection with a on/off button, can I just turn the surge protector extension on and off without disconnecting the magsafe connector and adapter plug from my laptop when i'm not using it?
    thank you very much

    If there is any arcing it may be because the adapter is dirty. It is best to plug in the wall wart then attach the magsafe to the MacBook. As GfulDedFan mentioned this reduces the chance of power surging the MacBook. I have done mine this way since he day I bought it and have never had an arc. I keep it clean to reduce the chance of this happening. The following will help in the care of your supply.
    Apple: Use and cleaning of MagSafe power connector

  • I added a custom ringtone . Then later I tried to add another three set  but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

    I added a custom ringtone . Then later I tried to add another three set  but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

    Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

  • What is the right way to change the active JInternalFrame for and MDI app?

    I am working on my own implementation of the window menu. The action that is triggered when a customer chooses a window to activate from the list in the menu is not behaving as I expected. The code I wrote (below) switches frames correctly but the caption bar never gets updated and if you restore a frame from an icon the frame is not correctly activated, there is even a restore button which if you push fixes things up and the frame then behaves normally     if (frameToActivate.isIcon ())  {
              //  Restore from icon
              desktopPane().getDesktopManager().deiconifyFrame (frameToActivate);
         desktopPane().getDesktopManager().activateFrame (frameToActivate);
         desktopPane().setSelectedFrame (frameToActivate);I did a search of the web and found a tip on JavaWorld (http://www.javaworld.com/javaworld/jw-05-2001/jw-0525-mdi.html) which led me to try doing this from a different angle - the JInternalFrame's point of view. This code works     try {
              if (frameToActivate.isIcon ())  {
                   //  Restore from icon
                   frameToActivate.setIcon (false);
              frameToActivate.moveToFront();
              frameToActivate.setSelected (true);
         } catch (PropertyVetoException error) {
              error.printStackTrace();
         }My question is why does the desktop based approach not work? If methods exist that appear to let you restore and switch between frames why are the ineffective? Am I missing something obvious that I should be doing?
    If using the JInternalFrame methods is the right way to go then I will It just seems like if the DesktopManager has methods that advertise that is supports managing the active frame then they should work. Before I ignore them I want to check with you to see if there is a right way to use them.
    Ian

    So, this is another batch of duke dollars I cannot assign - since I solved my own problem:-)
    I had an epiphany and tried setting break points to see what code was executed when you click on an inactive frame. From that I determined that DefaultDesktopManager.activateFrame, as implemented, does not activate the frame but acknowledges the activation of a frame and does a small amount of bookeeping work for the DesktopManager. So, the solution is the code I wrote to switch focus using the JInternalFrame's methods. Since I did not want to have to write those nine lines of code in the couple of places I want to programmatically switch the active frame I added a get/setActiveFrame method to my JDesktopPane derivative. In case others face this problem here is the code (warning I have not yet setup building the JavaDocs for this project so I cannot vouch for the validity of the JavaDoc, but the code does work):/**
    * Bring frameToActivate to the front (restoring from icon if neccessary) and make it the
    * selected frame.  This method does all the things required to switch the active frame for
    * an MDI application unlike: @link JDesktopPane.setSelectedFrame, which does not change the
    * focus; @link javax.swing.DefaultDesktopManager.activateFrame which does not correctly
    * handle iconified frames or switch the focus properly; and
    * @link javax.swing.JInternalFramesetSelected which also does not handle iconified frames.
    * @param frameToActivate the frame to bring to the front and become the active window
    * @throws IllegalArgumentException
    public void setActiveFrame (JInternalFrame frameToActivate) throws IllegalArgumentException  {
        if (frameToActivate == null)
            throw new IllegalArgumentException ("setActiveFrame a frame must be passed a non null valie.");
        try {
            if (frameToActivate.isIcon ())  {
                //  Restore from icon
                frameToActivate.setIcon (false);
            frameToActivate.moveToFront();
            frameToActivate.setSelected (true);
        } catch (PropertyVetoException error) {
    * This method returns the currently active frame.  This method returns the same frame
    * as <code>getSelectedFrame</code> and is provided for symetry for <code>setActiveFrame</code>. 
    * @return the currently active frame
    * @see LDesktopPane.setActiveFrame
    * @see javax.swing.JDesktopPane.getSelectedFrame
    public JInternalFrame getActiveFrame ()  {
        return getSelectedFrame ();
    }IL

  • My daughter has forgotten the password to her ipod? What do i have to do to get it working again?

    My daughter has forgotten the password to her ipod? What do i have to do to get it working again?

    Connect the iPod to the computer she uses and restore the iPod via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

  • What is the right way to handle events?

    What is the right way to handle events? If I start doing stuff in the AWT event thread (particulaly things that create their own events) should I be starting a new thread?
    A link to a good book or reference source will do
    thanks in advance

    http://java.sun.com/docs/books/tutorial/uiswing/events/

Maybe you are looking for