Received message with invalid client

Logs on one Lion 10.7.5 machine are full of
dscl[48193]: received message with invalid client_id 3
The PID keeps incrementing but the client_id is always 3
Googling mainly leads back to:
https://discussions.apple.com/message/18643232?searchText=Received%20message%20w ith%20invalid%20client#18643232
But this system isn't using LDAP. I found one post that suggested stopping and restarting AFP, but:
macbook:~ joliver$ sudo serveradmin stop afp
afp:error = "CANNOT_LOAD_BUNDLE_ERR"
macbook:~ joliver$ sudo serveradmin start afp
afp:error = "CANNOT_LOAD_BUNDLE_ERR"
Any ideas?

You may find the solution here:
https://discussions.apple.com/thread/3602806
SQL

Similar Messages

Received message with invalid client_id

I am running a Mac Mini Server with Mac OSX 10.7.3 Server and when I log in with a client (also a Mac Mini running Lion OSX 10.7.3) I see this in the system log. Everything is working fine but I don't understand why I recieve these messages.
Feb 23 12:28:15 server AppleFileServer[558]: received message with invalid client_id 462
Feb 23 12:28:15 server AppleFileServer[558]: received message with invalid client_id 463
Feb 23 12:28:17 server AppleFileServer[558]: received message with invalid client_id 470
Feb 23 12:28:17 server AppleFileServer[558]: received message with invalid client_id 471
If I log in with an older Mac Mini running Snow Leopard I don't see these messages. I tried this with another Mac Mini running the same Lion 10.7.3 and I see the same messages (different id numbers).
Anybody have an idea why this is happening?
Thanks,
Tony

You may find the solution here:
https://discussions.apple.com/thread/3602806
SQL

Message Bridge error "Received message with no URI property"

I have created a message bridge between two weblogic JMS servers on different domains.
          Message bridge has source and destinations.
          I have tested each ques seperately with MDB deployed on each server.
          When i am putting message on source que then i am getting this error "Received message with no URI property"
          It would be grat help if some could tell me what might be going wrong.
          Thanks
          Akash

Hi,
          This exception indicates a failure to establish a JNDI context for either the source or target destination host. Check if the the bridge's configured URLs for both are correct. I'm not 100% sure, but it is likely that no URL need be configured for destination's that are in the same cluster as the bridge.
          For more information, I suggest looking at the Messaging Bridge FAQ, which contains some troubleshooting tips. You can find a link to it here:
          http://dev2dev.bea.com/technologies/jms/index.jsp
          Tom Barnes, BEA

HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off? I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until I turn on cellular or wifi.

Depends on the type of Message.
SMS messages will send and receive with data off. and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
However Android should be sending through SMS.
You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

Why do I receive messages with only a date, no subject, no from, no body, etc.?

at varying times I receive messages with a blank subject, no entry in [from, to] no body, but a date in 1969.
Any ideas why I receive these?

Thank you for your help.
I tried emptying the inbox, deleting the 2 files, and restarting TB.
I did the same for Sent and Trash.
I also deleted all .msf files for all inbox sub-folders and for all folders and sub-folders under "My Mail".
the problem persists.
My inbox has many sub-folders and sub-sub-folders should those be moved to My Mail?
Another problem I am having. I do not know if it is related.
I have a stack of filters that move incoming mail into folders. The stack ends with 2 filters.
(1) a filter that checks whether FROM is from someone in my mail lists. It then moves the message into a folder called "Known Sender".
(2) a psuedo-ELSE filter that check whether the subject contains a very improbable string. It put the message in a folder called ") Suspicious".
Sometimes I still end up with folders in Inbox that clearly should be in the two folders, "Known Sender" or ") Suspicious".

How to receive message from flex client

From the sample 'testdrive-datapush', I know how to receive message from backend(java) to flex client.
Now, I want to know how to receive message from flex client to backend.
I tried to find it in http://livedocs.adobe.com/blazeds/1/javadoc/.
but I failed.
Do you guys know the solution?

Alex mentioned a solution in another thread.
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/help.html?content=messaging_config_3. html#256378
[quote]
Using a JMSConsumer object instead of the JMS adapter
You use a JMSConsumer to listen for JMS messages without relying on the JMS adapter. Customer code is responsible from receiving JMS messages, converting them to Flex messages and using BlazeDS APIs to pass the message to Flex clients.
In the following code example, a bootstrap service is used to create a JMSConsumer object when the server starts. When a JMS message is received, it is printed (rather than converting it to a Flex message and handing it to BlazeDS). For different workflows, a RemoteObject could be used to create JMSConsumer objects.
[/quote]
Do you know where is the code example?

B1iSN - sender and receiver message with different tesk

Hi all,
I have a question regarding the B1i.
Is it possible to have the receiver will have a different task then the sender?
My scenario is:
The user creates a Delivery note in company "a",
The B1i creates an Invoice from that Delivery Note in company "b".
now I want to update the Delivery note with the DocEntry of the created Invoice.
I copied all other fields to my receiver message.
My problem is that I want on the event of "Create Invoice" in company "b" to update a Delivery note in company "a".
I tried doing in 2 ways:
one is in the xsl file I wrote the <QueryParams> element. Then I got this error: The business object already exists
The second is without the <QueryParams> a new Invoice was created (but i wanted the existing one to be updated).
Is it possible to do this in the B1i? How?
Thanks in advance!
Chana

Hi Chana,
Did you configured the biu to "Update on Exist"??? (Guide 03 Extensibility, section 2.14)
You can have a look to the B1iSN 8.8 B12B1 Intercompany scenario in order to see how it is done (B1iSN 8.8 is already in GA). In that scenario the Subsidiary PO is updated with the number of the SO when the SO created by B1iSN in the Headquarters.
Regards,
Trinidad.

Could anyone post examples about sendingand receiving messages with SOAP

I am newbie, and want to learn SOAP. Anyone can tell me
where to find many examples about communication between client and server
based on SOAP. The example is in java code should be best.
Many thanks in advance

Java tutorial at http://java.sun.com/webservices/docs/ea1/tutorial/doc/JAXM.ws.html#63873
should be a good starting point.
I have sample code, which creates SOAP header and SOAP elements. THis code gives an idea to create SOAP messages and to parse the SOAP response. Hope this helps.
I pass Application ID and password in SOAP header, used by the Webservices provider to verify my application. In the SOAP elments, I pass a string (called ticket) and ip address. Web services provider will verify the string and return the response along with some attributes related to the user (extended attributes).
import javax.xml.soap.*;
import javax.xml.messaging.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import com.sun.net.ssl.internal.ssl.*;
public class AuthenticateTicket extends HttpServlet{
private static ServletConfig Config;
//always use this Name space
private static final String AUTH_WS_NS = "http://some.url.com/ws/";
// parameters to get the properties for AUTH
private static final String AUTH_LOGIN_URL = "http://some.url.com/loginpage/" + "?izAppId=AUTHappl";
private static final String AUTH_WS_URL ="http://some.url.com/loginpage/v4.asmx";
private static final String AUTH_CLIENT_APPL_ID = "AUTHappl";
private static final String AUTH_CLIENT_APPL_PSWD = "AUTHappl";
* init
* @param ServletConfig
* @return void
public void init(ServletConfig config) throws ServletException {
     Config = config;
* service
* This is where the servlet get invoked.
* @param HttpServletRequest
* @param HttpServletResponse
* @return void
* @throws ServletException
* @throws IOException
public void service(HttpServletRequest request, HttpServletResponse response)
     throws ServletException, IOException {
System.out.println("------- service() AuthenticateTicket -------");
     String host = request.getRemoteAddr();
     String izTicket = request.getParameter("izTicket");
     String izStatus = request.getParameter("izStatus");
if (host == null || host.equals("localhost") || izStatus == null || izStatus.trim().equals("") ) {
response.sendRedirect(AUTH_LOGIN_URL);
else if (izTicket != null){
          verifyAUTHTicket(host, izTicket);
          RequestDispatcher rd = request.getRequestDispatcher("/jspPage1");
          rd.forward(request, response);
          return;
     else {
          System.out.println (" NOOOOOOOOO TICKET ");
          RequestDispatcher rd = request.getRequestDispatcher("/jspPage1");
          rd.forward(request, response);
* <code>createSOAPMessage</code>
* Create the standard AUTH Soap Message.
* This is used during the verifySession process. It creates the message with
* the returnAllAttriutes = true;
* @param String host
* @param String ticketStr
* @return SOAPMessage
* @throws Exception
private static SOAPMessage createSOAPMessage(String host, String ticketStr) throws Exception{
MessageFactory msgFactory = MessageFactory.newInstance( );
SOAPMessage soapMessage = msgFactory.createMessage();
          soapMessage.saveChanges();
// Obtain references to the various parts of the message.
SOAPPart soapPart               = soapMessage.getSOAPPart();
SOAPEnvelope soapEnvelope     = soapPart.getEnvelope();
SOAPBody soapBody               = soapEnvelope.getBody();
SOAPHeader header               = soapEnvelope.getHeader();
//********** HEADER PART **********
Name headerName = soapEnvelope.createName("wsConsumerCredential", "", AUTH_WS_NS);
          SOAPHeaderElement hdrElem = header.addHeaderElement(headerName);
Name authId = soapEnvelope.createName("id");
Name authPwd = soapEnvelope.createName("password");
SOAPElement idElem = hdrElem.addChildElement(authId);
          idElem.addTextNode(AUTH_CLIENT_APPL_ID);
SOAPElement pwdElem = hdrElem.addChildElement(authPwd);
          pwdElem.addTextNode(AUTH_CLIENT_APPL_PSWD);
//********** BODY PART **********
// Create the <VerifySession> body elements.
Name verifySess = soapEnvelope.createName("VerifySession", "",AUTH_WS_NS);
SOAPBodyElement verifySessBOS = soapBody.addBodyElement(verifySess);
// Create the child elements under the <VerifySession> elements.
Name ticket = soapEnvelope.createName("ticket");
Name userIP = soapEnvelope.createName("userIpAddr");
Name extendedAttr = soapEnvelope.createName("returnExtendedAttributes");
SOAPElement ticketBOS = verifySessBOS.addChildElement(ticket);
SOAPElement ipBOS = verifySessBOS.addChildElement(userIP);
SOAPElement exAttrBOS = verifySessBOS.addChildElement(extendedAttr);
//ticket string
ticketBOS.addTextNode(ticketStr);
ipBOS.addTextNode(host);
//boolean, do we want extended attr?
     exAttrBOS.addTextNode("true");
          soapMessage.saveChanges();
soapMessage.writeTo(System.out);
return soapMessage;
* <code>parseSOAPResponse</code>
* Parse the standard AUTH Soap Response
* This is used to parse through the AUTH response to gather all the necessary user
* information.
* the returnAllAttriutes = true;
* @param SOAPMessage
* @return User
* @throws Exception
private static void parseSOAPResponse(SOAPMessage response) throws Exception{
String uid, firstName, lastName, email, bolID;
System.out.println (" ============ RESPONSE IS: ====================");
response.writeTo(System.out);
          SOAPPart sp = response.getSOAPPart();
SOAPEnvelope soapEnvelope = sp.getEnvelope();
SOAPBody sb = soapEnvelope.getBody();
Name cName = soapEnvelope.createName("VerifySessionResponse","", AUTH_WS_NS);
Iterator it = sb.getChildElements(cName);
SOAPBodyElement verifyResponse = (SOAPBodyElement)it.next();
//System.out.println(" got verifyResponse");
it = verifyResponse.getChildElements(); //iwsResponse
SOAPElement iwsResponse = (SOAPElement)it.next();
//System.out.println(" got iwsResponse");
cName = soapEnvelope.createName("action");
String actionStr = iwsResponse.getAttributeValue(cName);
cName = soapEnvelope.createName("hasErrors");
String hasErrorsStr = iwsResponse.getAttributeValue(cName);
          if (actionStr != null && actionStr.equals("Verify") && hasErrorsStr != null
          && hasErrorsStr.equals("false")) {
SOAPElement info = null;
cName = soapEnvelope.createName("sessionInfo","", AUTH_WS_NS);
info = (SOAPElement)iwsResponse.getChildElements(cName).next();
System.out.println (" name is: "+ info.getElementName().getLocalName() + "----" + info.toString());
cName = soapEnvelope.createName("status");
String status = info.getAttributeValue(cName);
System.out.println (" status : " + status) ;
          if (status == null || status.indexOf("Active") < 0)
               throw new Exception("Session not Active");
               SOAPElement userData = null;
cName = soapEnvelope.createName("userAttributes","", AUTH_WS_NS);
userData = (SOAPElement)info.getChildElements(cName).next();
System.out.println (" ===> got user Data ");
cName = soapEnvelope.createName("attribute","", AUTH_WS_NS);
it = userData.getChildElements(cName);
SOAPElement attr = null;
cName = soapEnvelope.createName("accounts","", AUTH_WS_NS);
userData = (SOAPElement)info.getChildElements(cName).next();
System.out.println (" ===> got user Account Data ");
cName = soapEnvelope.createName("account","", AUTH_WS_NS);
it = userData.getChildElements(cName);
SOAPElement account = null;
String loginIDStr=null, typeStr=null, statusStr=null;
while (it.hasNext()){
account = (SOAPElement) it.next();
cName = soapEnvelope.createName("loginId");
loginIDStr = account.getAttributeValue(cName);
cName = soapEnvelope.createName("type");
typeStr = account.getAttributeValue(cName);
cName = soapEnvelope.createName("status");
statusStr = account.getAttributeValue(cName);
     if (statusStr.equals("Authenticated")) {
          System.out.println("\n\nAuthentication successful");
     else {
          System.out.println("\n\nAuthentication failed");
* <code>verifyAUTHTicket</code>
* this is for verifySession call to AUTH; It controls the flow with AUTH.
* @param String host
* @param String ticketStr
* @return User
* @throws Exception
public static void verifyAUTHTicket(String host, String izticket) {
     SOAPConnection conn =null;
     try {
//Creat a message
          Provider provider = new Provider();
          java.security.Security.addProvider(provider);
SOAPMessage message = createSOAPMessage(host, izticket);
// Get a SOAP connection from the connection factory.
SOAPConnectionFactory connFactory = SOAPConnectionFactory.newInstance( );
// set the default security protocol (shipped with JSSE1.0.2)
          System.setProperty ("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
// add the default security provider (again, in JSSE1.0.2)
//          java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider() );
conn = connFactory.createConnection( );
// Define the message destination.
URLEndpoint destination = new URLEndpoint(AUTH_WS_URL);
// Send the message and wait for the response.
SOAPMessage response = conn.call( message, destination );
parseSOAPResponse(response);
} catch (Exception ex) {
ex.printStackTrace();
// Close the connection.
finally{
try{
if (conn != null){
conn.close();
catch (SOAPException se){
}

I can't send and receive message with my 3GS french iphone with the iOS5. What can I do?

I have install the new iOS5 and now i can't send or receive message. What can i do to resolve this problem? Can I downgrade to the iOS 4.3.5 and where can i find the information to do that

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
This is helpful Mail Setup Wizard:
http://www.apple.com/support/mail
This, is not forum for notebook owners.
I would post in Mountain Lion : Mail

Problem receiving messages with Blackberry messenger

I recently purchased the Blackberry 8130 Pearl. While using the blackberry messenger I have an intermitant problem where I do not receive messages. I have to remove the battery and restart the phone to receive the message. Can anyone shed some light on this?

Y U No Help Me

Drop insert in receiver system with multiple clients

Hello,
does TDMS handle drop-insert technology in a multiple client receiver system automatically?
What can be the impact for the other clients when they are working while data deletion in the
receiver client?
Regards Karlheinz

Hello Karlheinz,
Good, question is straight and clear now.
please refer to steps mentioned in oss note 1433553 to make sure that TDMS should not consider drop_insert in TDMS migration.
Regards,
Amit Sharma
Solution
You have the possibility to set a Global Parameter for setting the deletion
scenario to overall array delete. In the following a description of the
proceeding.
Check if the global parameter GLOBAL_NO_DROP_INSERT exists
and that it is set to 'X' in the receiver system.
Call the Migration Server Overview(tcode cnv_mbt_tdms).
Expand the tree until you get your package.
Mark the package number so that it is highlighted.
In the menu click on Goto->Global Parameter.
When you have correctly positioned your cursor on a package number you
will see in the application toolbar buttons named with the exection targets,
system name and client number. You can also see if a connection to the listed
system is working (checkmark) or not (lightning).
Click on the button
'RECEIVER' to get the global parameters from the receiver system. This is where
the Global Parameter has to be set.
The global parameter entries will be
delivered empty and for the parameter you want to use you have to set the value.
An initial global parameter has no value in the column 'Client'.
Mark the row with the global parameter
'GLOBAL_NO_DROP_INSERT'.
Press button copy text (third button).
In the menu bar click on the drop-down box of the insert button and choose
the item 'Insert in new row' in the selection list (forth button from
left).
In column 'Client' enter the client where you want to use the overall
scenario array-delete. If you enter the value 'ALL' then the setting is valid
for all clients in the system.
In the column 'Parameter Value (from)' enter the value 'X'.
Save your settings.
If the parameter already exist you have to check whether the correct
client is set. If the column 'Client' includes the deletion client or the value
'ALL' then no further settings are required. Otherwise you have to copy the
Global Parameter as previously described and change the value in the column
'Client' with your deletion client. Take care that the value in column
'Parameter Value (from)' is 'X'.
From now on the generation of deletion
programs will use this information to create the deletion programs with deletion
scenario ARRAY-DELETE.

Unsent message with Invalid Sender Address: NOT in OUTBOX!

I have an unsent email that is stuck "somewhere", the result of accidentally entering the incorrect email address when modifying a mobileMe account. When it tries to send, I used to get "Sender Address Invalid". But there are no messages left in the Outbox to delete.
So now at the bottom center of the MAIL screen it says "1 Unsent Message". And every so often it'll try sending it ("Sending 1 of 1). But then it'll just stop -- with no messages.
Restarting the iPhone doesn't clear it out.
Where is this message sitting? And how does one zap it?

One thing that might help out.
Go to settings > mail, contacts, calendars > your mail account.
Then tap on smtp to view all your servers.
Make sure your primary server is on.
Then go through and turn on all your secondary servers.
Go back into mail and see if you have an outbox with an unsent message.
Hope this helps.

Lync mobile on iOS - received message with overlap text

Hi,
This issue occurs only on iPhone - on Android's mobile phones all works fine.
Long lines of text in paragraph overlap. It's difficult to read.
http://imgur.com/PqPX444
How to fix it?

Hi MariuszKowalik,
It's really weird.
I use Lync 2013 on iphone 5 with IOS 6 & 7 & 8 and never have such experience.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When I receive messages with attachments, the contents of the attachment also show up in the body of the text. Anyway to prevent that? Thx

Example, excel file shows as an attachment, and can be opened as an attachment...but the contents of the excel file are also included in the body of the email. Same happens with jpegs. thx

''sc344 [[#question-1057671|said]]''
<blockquote>
Example, excel file shows as an attachment, and can be opened as an attachment...but the contents of the excel file are also included in the body of the email. Same happens with jpegs. thx
</blockquote>
correcting my example - the files are text files (txt) and jpegs - not excel files.

Scaleability of JMS Clients Receiving Messages

How do you scale the receipt of messages in a JMS client for messages from the same topic?
Given a topic, I would like to enable concurrent receipt and processing of messages by many concurrent listeners where a single message is only consumed once by any of the listeners. Even more, I would like to scale by having many clients with possibly many listeners servicing the same topic where a single message is only consumed/processed once.
However, based on the documentation (see below) it appears sessions only enable a single thread of execution to be simultaneously running servicing incoming messages one at a time! And adding subscribers implies the delivery of a single message to each subscriber creating duplicate processing of the same message.
Quote from JMS Tutorial: "The session used to create the message consumer serializes the execution of all message listeners registered with the session. At any time, only one of the session's message listeners is running."

Hi vincegeorge,
To be able to have several consumers actively using message listeners concurrently you could create each consumer on a different session. This would get around your problem of concurrent receipt and processing of messages when using message listeners.
The second problem, ensuring that each message is received by only one TopicSubscriber is much more difficult. As each subscriber will receive every message that is sent to the particular topic then each subscriber will be sent a copy of that message. The only exception to this rule is if you have set a "message selector" for the consumer. If you knew exactly which subscribers were active at the publisher end then you could set a property on the message, e.g. SubscriberID=1, on the message and then each subscriber could set a message selector to say that they only wished to receive messages with the property SubscriberID set to their particular number. To notify the publisher which subscribers are active you could have a special destination that contains heartbeat messages informing everyone of their subscriberID.
However, is it possible instead though that you could use a queue. This would be much easier to code (no message selector and no need to keep everyone informed of which subscriberID's are available) as the queue would ensure that only one receiver ever consumed the message.
Hope this helps a little,
Tom Jenkinson
Arjuna Technologies Limited

Received message with invalid client

Similar Messages

Maybe you are looking for