Received qty valuated stock(0RECVALSTCK) and received qty total stock(0RECTOTSTCK) for 0IC_C03

Hi Team,
What is difference between received qty valuated stock and received qty total stock?
According to me received qty total stock would be entire stock ie.received qty - block stock , received qty into consignment stock etc
Please revert
Regards

Hi Phani,
Thanks for the reply.
Yes total stock would be consignment +quality inspection+blocked stock etc....
But valuated would be something where there is costing or valuation ie we will have GL account hit.
For eg Returnable material would be in total stock but not in valuated stock.
Thanks

Similar Messages

Mailbox not receiving, but Blackberry Can Send and Receive-Additional Issue

Not receiving mail to my Mac Inbox or the linked Gmail account within Mail ap. Sent mail sends, but stays in the Outbox. Spinning Dial next to "Sent" will not stop.
Furthermore after several reboots, connection checks and software updates it still persists.
My BB is sending and receiving messages fine and is also connected to Gmail.
Please help

''aem28 [[#answer-706948|said]]''
<blockquote>
''aem28 [[#answer-706943|said]]''
<blockquote>
Thanks for the idea.
I cleared the message from the server (It was long gone.) and I Blocked the message in Yahoo, I also Blocked it in TB. However, I still get the same message from three weeks ago and nothing more, so I am sure it has something to do with a Profile. If I can't smoke it our there, I will clear out the profiles and start from scratch.
I'd appreciate any further thoughts as I don't want to lose my Contact List as some of my Messages.
</blockquote>
</blockquote>

Receiving idoc from R/3 and receiving aleaudit idoc back to senderr

Hi,
I'm trying to post a idoc from R/3 to a FTP server using file adapter. I have configured a RFC destination, port on R/3 to the XI server and a partner profile on R/3. Also created a RFC destination and port on the XI to the R/3 system.
When I try to test the idoc using TA we19, mention the sender and reciever port , the idoc is sent with a msg 'IDoc sent to R/3 System or external program'. In TA we05 the idoc is shown with status 3.
But when monitoring the idoc in XI it doesn't appear in the moni
Would appreciate ur replies.

HI,
Please try to run program RBDMOIND with ta code se38.
Also see the below links for ALE AUDIT.
Check these docs...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
https://websmp210.sap-ag.de/~sapdownload/011000358700003477212005E/HowTo_IDOC_Ack_20040817RR.pdf
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Regards
Chilla..

The BW Total Stock Not Matching with ECC5 Total stock as on 31-08-2007

Hello Masters and learned Gurus,
As per the Analysis, I could find that in ECC5 the Stock as on 31.08.2007 is showing 13 for the Material 16901 where the Issues Total is added to the Stock on 31.08.2007 and finally it is showing the result as on 31.08.2007 19 in BW.
So, In BW these values are not reflecting as the values available in ECC5.
And also i found that the data to the cube is populating from Transactional ODS through APD ( Analysis Process Designer ).
Please help me in this regards.

Hello Masters and learned Gurus,
As per the Analysis, I could find that in ECC5 the Stock as on 31.08.2007 is showing 13 for the Material 16901 where the Issues Total is added to the Stock on 31.08.2007 and finally it is showing the result as on 31.08.2007 19 in BW.
So, In BW these values are not reflecting as the values available in ECC5.
And also i found that the data to the cube is populating from Transactional ODS through APD ( Analysis Process Designer ).
Please help me in this regards.

How can i get my iphone on straight talk to send and receive mms?

I have an iPhone 4 on straight talks network. I have never been able to send or receive mms messages to anyone other than a device with iMessage. How can I get it to work? I dont want to change to a Galaxy or any other kind of phone, but I will if this doesnt get figured out. Straight talk says its an issue with Apple products. Please help!!

Hey Jstugelmeyer,
First, I would go through these three steps:
Restart your device.
Update to the latest iOS Software.
If you are trying to send a message to multiple recipients and you type in each contact manually instead of using the contacts list, make sure you tap return instead of space to separate each one.
Then, if you still can't send or receive MMS messages:
To send and receive MMS messages on your iPhone, verify that your wireless carrier supports MMS2.
Ensure that MMS Messaging is turned on in Settings > Messages.
Verify that your phone is able to access cellular data.
Some carriers allow you to edit your APN (Access Point Name), which may prevent MMS from working.
If you are roaming outside your calling area, make sure you have Data Roaming turned on in Settings > General > Cellular to send or receive MMS content.
While on a phone call, you will be unable to send or receive MMS messages when using an EDGE, GPRS, or any CDMA cellular data network. After the phone call ends, you will receive any incoming messages. If you tried to send an MMS message, you may need to send it again.
If the issue persists and your wireless carrier has confirmed that your wireless account is provisioned2 for MMS, restore the iPhone.
via: iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Welcome to Apple Support Communities!
Best,
Delgadoh

Stock value and Quantity on a particular date

Hi all,
How to get the Stock value and Quantity on a particular date for the materials
is there any standard report available or from which tables the corresponding data can be fetched...
With Regards,
Vamsi.

Hi
MB5B - Stock on Posting Date
MMBE - Overview of the current stocks of a material at all places within plant
MB52 - Plant Stock availability
Regards
Anandh

Different sales area for Inter company stock transfer and STO

Hi People,
                       Is it possible to have two different sales area's for Inter company stock transfer and within the company stock transfer. The problem is in below step
IMG->MM->Purchase Order->Setup stock transport order->Define shipping data for plants.
In this step when you define plant as customer, the same plant as customer needs to be maintaind for both STO and Inter company and there is only one entry of sales area possible for this single plant. So, how can the task be achieved.
I want that STO should be carried out by sales area lets say X/Y/Z
Inter company should go through A/B/C.

hi dear,
           It is not possible at all to have two sales area for given Plant in STO.
           What is issue in that u can Transfer any MATERIAL, just need to extend it to given sales area.
Reagrds
AJIT K SINGH
HAPPY TO HELP U

Inventory Management : Total stock turnover

Hello,
Can anyone tell me the logic for calculating Total Stock turnover & the Average quantity of total stock in an Inventory Management scenario.
Thanks & Regards
Indraneel

Hi
1. Warehouse Inventory Turnover of Total Stock Specifies how often average total stock has been consumed. (Total consumption quantity / Total stock- average quantity)
2. Average Total Stock Warehouse Inventory Turnover Specifies how often average total stock has been consumed based upon the average total usage. (Average total consumption quantity / Total stock u2013 average quantity)
refer this if u still have queries
http://help.sap.com/saphelp_nw04/helpdata/en/06/8c6cfe0e67fd43a6cd3603d246ced7/frameset.htm
hope it helps

Open Qty and Received Qty for Open Purchase Order.

How to Fetch the open qty and received Qty of every Open purchase orders in EKPO table where ELIKZ = SPACE OR LOEKZ = SPACE. What are the table and field used? Kindly help me.

Hello Senthilramkumar,
Use ME2L/ME2N/ME2M with selection parameter WE101.
Hope this will help.

Where to get Received/Required Qty and Available Qty of MD16

Hi Experts!
Need your help!
I need to know where or how to get the values at the Received/Required Qty and Available Qty column found at MD16 order report.
Thanks!

hey use MD04 for this purpose enter material and plant
and press enter
and u will get all details
hope it will be useful
cheers
s.janagar

Stock value and qty on particular date.

Hi All.
Could you you guide me in which transcation I will get the report of existing stock value and qty for a particular valution class on particular date like 15 Apr 2009.There is a transaction MB5B similar to my requirement but there is no Valuation class as selection.
Thanks in Advance
Regards
katta

Hi,
You can get valuation class data thru MC.9 or MC.1 but problem is it is for month only
If you want to go for particular material analysis than use MB51 from go live to till date or MB5b with storage location selection
Regards,
Chetan Mistry

Scrap and rework qty stock

Dear ALL,
IN MY SCENARIO I AM DOING THE PRODUCTION CONFIRMATIONS IN CO11N USING MAIN OPERATION IN THE ROUTING.I AM USING AUTO GR FOR HEADER MATERIAL(101)MOVEMENT IN THE FINISHED GOODS LOCATION OF THE CONCERNED SHOP & GI FOR THE COMPONENTS AS PER BOM FROM THE RAW MATERIAL LOCATION OF THE SHOP.BUT I AM UNABLE TO SEE THE STOCKS OF THE SCRAP AS WELL AS THE REWORK QUANTITY OF THE HEADER ITEM.PLEASE HELP ME SO THAT I CAN UPDATE THE STOCK OF SCRAP & REWORK QTY.IN THE SYSTEM IN THE BLOCK LOCATION OF THE SHOP.
THANKS IN ADVANCE
R SEHGAL

Hi Rakesh,
There is no standard report for scrap quantity. We have to develop Z report with the help of tables like AUFK-AUFM and AFVV.
The best way is get the details of scrap from table AFRU (field XMNGA) and download to excel with order type or with material/plant combination.
If you are having rework orders for scrap then you can display this rework quantity from COOIS transaction.
If helps reward points and close this thread.
Regards
TAJUDDIN
Message was edited by:
TAJUDDIN MOHAMMED

QM- Differnce between stock posting and Qty. posting

Hi Gurus,
I want to know what is the difference between the term stock posting and the term qty. posting.Is it possible to do the stock posting and qty. posting from QA32 screen.
Thanks in advance.

Hi,
The term Qty posting and Stock Posting are same. The material stock or qty can be transfered to different storage locations or to different plants or to different companies. The material will be removed from one location and added in the other location.
Through QA32 you can do the stock or qty posting if the material is in the Quality stock.
B'regards
krishna

Third Party Items and Receiving Calendar

Hi Gurus,
I have a question about third-party items and receiving hours. I've searched this forum, OSS, and other sources, but I'm stumped.
First some background: our company ships product from stock and third-party items. For each customer we maintain a single unloading point, and the receiving hours for this unloading point are the days the customer is open.
For stock items, we have transportation scheduling switched on. SAP determines the delivery date for these items based on the route and the receiving calendar.
For example, assume an order is placed on Monday 9/24, we are using a 1-day route, and the customer is only open on Fridays. The system will schedule the delivery for Friday 9/28 - based on the customer's receiving calendar.
For third-party items we have a committed 1-day delivery time from our vendors. My problem is that in this case SAP does NOT consider the receiving calendar. For example, if an order is placed on Monday 9/24 and the customer is only open on Fridays, the system will schedule delivery for Tuesday 9/25.
This is a big issue for us because we drop-ship refrigerated product to the customer. If the product arrives on a day the customer isn't open, it will be damaged.
Does anyone know how to get SAP to consider the customer's receiving calendar for third-party items?
Thanks
Rick

Hi Navneetha,
Thanks for d reply.
I hv checked d mentioned tables and Itm Categories nothing is +ve there. All 3 itms hv TAS itm category. Also I agree with ur MIRO statement.
I found one thing which might b d cause plz check.
As we knw dat we cant change the schedule ln date and quantity once the Pur. Requisition created. and we cant make changes in sales order itm line if the PO is created for that Pur. Requisition. Bcoz afteward the PO wont be updating the Pur Requsition and sales order automatically.
But here the schedule line date at d schedl ln category for itm 2 is changed by a certain Batch job after the PO cration.
Therefore I think this wd b d reason that the item line 2nd is not getting updated in sales order from the PO and looks open.
The change of schedule line dates is not maintained in the PO manually ever.
So would it b d reason for the inconsistent doc flow updates and 2nd item being open as not invoiced yet?
regards,
Sandesh

Difference in closing Balance qty in Inventory Cube and R3 T-code MB5B

Dear All
In evaluations of the 0OIC_C03 Infocube and corresponding reports in R/3 with transaction MB5B/MB51 suggest incorrect data extraction. The difference is in the initial stoock uploeaded . I found transaction in the PSA of 2LIS_03_BX which are not there in the MB5B/MB51.When I run the Query I found a certain qty in the Closing Balance but the same can not be traced in MB5B. The closing balances is the differnce in the qty of Mvt. Type 541 and 542. The closing balance is apearing against the calday but not against the posting date. Moreever the closing balance is apearing against Calday 30/07/2008 whereas we have gone live on 01/08/2008 and uploaded the initial stock on 31/08/2008.
Dinesh Sharma

Dear All
In evaluations of the 0OIC_C03 Infocube and corresponding reports in R/3 with transaction MB5B/MB51 suggest incorrect data extraction. The difference is in the initial stoock uploeaded . I found transaction in the PSA of 2LIS_03_BX which are not there in the MB5B/MB51.When I run the Query I found a certain qty in the Closing Balance but the same can not be traced in MB5B. The closing balances is the differnce in the qty of Mvt. Type 541 and 542. The closing balance is apearing against the calday but not against the posting date. Moreever the closing balance is apearing against Calday 30/07/2008 whereas we have gone live on 01/08/2008 and uploaded the initial stock on 31/08/2008.
Dinesh Sharma

Received qty valuated stock(0RECVALSTCK) and received qty total stock(0RECTOTSTCK) for 0IC_C03

Similar Messages

Maybe you are looking for